Does anybody know what to do when iTunes stops recognizing Apple TV 1st generation?
Does anybody know what to do when iTunes stops recognizing Apple TV 1st generation? Apple TV works fine, MacBook works fine, but iTunes doesn´t see the Apple TV under Devices anymore. From what I read, it´s happened to lots of people. Is there anything at all to do?
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Similar Messages
-
I can't get any updates for my apps. I can't connect apps to Facebook and I can't even play some game they won't load all because iTunes must have been trying to take funds for a purchase. Although it doesn't tell me what purchase. Just that I owe them 4.98. I've written to them ten times and can't get them to understand this simple fix.."take your money". I even went as far as making a call to Apple which is no longer covered under my terms. 35.00 for a phone call. Only to find out it iTunes holding up everything with both my iPhone 4Gs and my iPad 2.
iTunes is telling me all this crap but not taking the money. I'm pretty clear as to what the problem is. But for some reason they just can't understand me.
So, how do you send iTunes 4.98 to clear your account? You can't.....I can't even purchase anything until they take the stupid money and hold off my account. But I'm getting no where with any of the people at iTunes. It sure seems simple to me but I guess it's not for them.
Anybody know what I can do????
Thank you,
Michelem0918Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
That would be great if someome had thanswer to this question on downloaded movie rentals and why the downloads don't seem to come through even though they charge your credit card. Any advice would be appreciated.
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Purchased music from I-tunes will no longer play when I hit play. The message "music file cannot be located" pops up and then takes me to some other file system. Does anybody know what to do? I have already tried to make sure that my Itunes player is default and that is not the problem.
Help!You get this message because iTunes can’t find the file. This can happen for a number of reasons:
The song file or a folder in its path was renamed
The song file or the folder it is in has been moved
The song file has been deleted
The device containing the song files e.g. external drive is not accessible or the drive letter has changed.
Do any of these aply to you? -
Hi,
when I try to download any APP I receive Error Code: 1009
I try it with itunes
Does anybody know, what the code 1009 means?
Thank you for helpingWhat country are you from?
1009 usually means your IP address originates in a country that does not have access to an App store. -
I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?
IF it is a manufacturing defect and you bought the device from Apple or an authorized Apple retailer, then take it into Apple.
-
After downloading the latest version of iTunes and updating my iPhone, everytime I turn on my computer I receive a message that reads: "AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite.dll" Help! Does anybody know what this means and how I can fix it? Thanks.
Yes. I just solved the problem on my PC. Here goes...
Issue: My Windows7 computer was producing the pop up box with the error text as you described.
The Problem: You have another application on your computer that uses the like named .DLL file... in this case a DLL supporting SQLite on your local PC.
Solution:
1. You need to use the Windows File search feature to look for the name "SQLite". This will quickly locate the offending DLL in the other application.
2. Decide which program you like the most, in my case "Mobile Me", and uninstall the offending application.
3. Uninstall Mobile Me.
4. Restart your PC.
5. Reinstall Mobile Me.
6. Mobile Me should sync at this point, but if not, restart the PC once again.
In my case, the offending program was my Aptana Studio development application. I had recently the SQLite3 database to my Ruby On Rails configuration...
This is where the file was located:
C:\Users\<USERNAME>\Aptana Studio 2.0\plugins\com.aptana.radrails.sqlite3.win32_3.5.7.1278709071\vendor\SQLite3.d ll
I hope this helps,
Ron -
I have just downloaded Mountain Lion for my MacBook Pro and now when my applications open they close and the error "This has just quit unexpectedly" message pops up. Does anybody know what is happening/how to fix it?
Welcome to Apple Communities
Press Command and R keys in boot and reinstall -
Everything I own (iPad, iPhone, mac) is set up on wi-fi. when i bring my work computer home (dell laptop), I cannot get it to keep the connection in a different room. All my other devices work.... does anybody know what i am doing wrong? please help!
Windows drivers for Intel wireless cards are known problematic.. If you have plenty of signal and it still cannot keep or hold the connection the issue can simply be the type of wireless.
Another problem is using names that windows does not easily handle.
eg If you set the TC using apple names, like
Fred Blog's Airport Time Capsule wireless24ad12
Then to windows this is too long.. it has spaces and it has illegal character.
Change all names on the TC to suit windows. Short, no spaces and pure alphanumeric.
Also security must be suitable.. I have no idea how old or what OS your dell is, but if you still have issues.. pull off the security on the TC for a test.. if the computer suddenly works, it is not compatible with WPA2 AES. Make sure you also use a password that is mix upper and lower case plus numbers.. avoid special characters and make it 10-20 characters long say.. it is not required to be more than that unless you are paranoid. -
does anybody know what is wrong with the ipod when error 1437 is reportedduring the restore cycle?
Double check the connections on each end to make sure they are nice and snug. If possible, plug the Nano into another existing USB 2.0 port.
Also, with the iPod still connected, try resetting it. To do this, press and hold both the Select (Center) and Menu buttons (or the Volume Down and Sleep/Wake buttons on the 6G Nano) long enough for the Apple logo to appear.
Then try restoring the iPod again.
B-rock -
I preordered the iPod Touch 5th Generation, and it says it will be here in October. Does anybody know what day in October, or have any idea when in October?
Apple has not provided additional details, sorry.
-
My phone says IMEI and ICCID unknown, does anybody know what I might do to fix problem?
While it could be a hardware problem (if so, take it to Apple for replacement), it is also a common sign that your attempted baseband update, (or hack) did not apply correctly. Whether it is reparable is not something for discussion on these forums.
-
TS3694 hi does anybody know what error 50 requirments are
hi does anybody know what error 50 requirements are needed
Well, I hope my experience helps someone in future as it appears nobody knows the answer.
But apparently this has to do with problematic files- either the file itself, or the file name, not sure.
How do I know this? because Finder also barfs on the same files. I was copying 30k+ tracks to a new drive and as iTunes was balky I decided to do it with Finder [yes, this creates other problems but at least it gets the files where I need them].
I tried selecting all of the tracks at once and dragging them, and letting Finder do the work overnight, but when I cam back in the G5 had gone into blower apoplexy and had to be restarted by pulling the plug. So, I started grabbing ever-smaller bunches of folders to narrow down the issue and to pitch the bad files. I did NOT try to identify the bad file, just the folder.
Michael Spencer -
My imac is doing strange things:
-delaying between users: when closing session it goes to blue, then takes a while to appear users signin box, and then wont recognize mouse command to enter until a couple of minutes later... then everything seems alright until....
-it gets stuck between things, the rainbow wheel appears and its just delays there forever....
-and every now and then the mouse starts flickering and bouncing wildly onscreen.
I ran the appel hardware test and it detected an error:
4MOT/4/40000003:HDD-1233
Does anybody know what that means? HELP!WZZZ answered about where to get iStat. And do check the SMART status. If it is an overheating problem due to a fan or logic board problem, your hard drive is possibly cooking itself to death. If so it isn't a faulty hard drive even though the hard drive might fail. So assuming it's a temperature problem, even if you are able to repair things on the disk with software, that is working on symptoms, not causes. I could be wrong however.
RE: AppleCare: Your iMac came with one year of AppleCare (Apple's warranty program), but within the first year you can buy 2 more years. You have to extend by the one year anniversary of purchase of the computer. Your 10,1 is too old to still be in the first year, and since you asked what it was, I'm sure you don't have it. Bottom line meaning is that whatever this problem turns out to be, you'll have to pay for it. Unless there is something like this. It is for 2011 iMacs with certain Seagate drives. You can put in your serial number for fun, but it looks like yours is too old. Lastly, some people have had Apple help them anyway if it is just out of warranty, but many have not. Your machine is one of these. Type in 10,1 in the search box. Is there an Apple Store near you? Just b/c it's out of warranty doesn't mean you shouldn't have it looked at by Apple. But no one here can say at all what Apple will or will not do.
Hope you get it taken care of! -
No loadable handlers?? Does anybody know what this means?
My mouse is skipping around and when I went to the system log in the profiler I found this:
Oct 30 12:27:46 macintosh-2 [0x0-0x5f05f].com.apple.Console[708]: Console: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
Oct 30 12:27:46 macintosh-2 Console[708]: Error loading /Users/ariburgess/Library/ScriptingAdditions/YouHelper.osax/Contents/MacOS/YouH elper: dlopen(/Users/ariburgess/Library/ScriptingAdditions/YouHelper.osax/Contents/Mac OS/YouHelper, 262): no suitable image found. Did find:\n
Does anybody know what this means and how I can fix it?
thanksThat script is added if you've installed any of the products from You Software:
http://www.yousoftware.com/
You've likely got an application that is incompatible with Snow Leopard.
In particular, You has recently released You Control 1.8 beta:
We have released the first beta of You Control 1.8. This is primarily targeted at addressing a known Snow Leopard compatibility issue.
http://blog.yousoftware.com/?p=154
Their Snow Leopard compatibility page can be found here:
http://www.yousoftware.com/support/snowleopard.php
Maybe you are looking for
-
Incorrect access restriction in Drag & Relate
Hi, I am encountering an access issue in Drag & Relate function. I have created two numbering series for Purchase Orders. PO and YPO. "User 1" can access the Purchase Orders with the series PO and "User 2" can access the ones with "YPO". I have set t
-
T-code for Delivery output/Invoice List output????
what is the T-code to print the delivery output and Invoice list output,appreciate your immediate reply. Thanks. Mohammed.
-
IWeb podcast artwork troubleshooting?
Here is the link to a thread about the trouble I'm having getting my artwork to correctly appear on my podcast in the iTunes store. Any help is greatly appreciated! http://discussions.apple.com/thread.jspa?messageID=13317069#13317069
-
Hi, I have been trying to create RFQ in ME41 transaction after providing the requisite entries. After click on Save button, I get a message mentioning "Document Created <RFQNum> and immediately I get a popup "Express document Update was terminated re
-
How do i get firefox to view localhost websites? (XAMPP,Apapche, Php, MySQL))
im trying to view locally hosted websites on my PC but firefox fails to display the wepages or the apache control panel each time i try???