Does Azure give deals for their service to business incubator companies/incubators?

Hi,
You could refer to the azure enterprise information via http://azure.microsoft.com/en-us/pricing/enterprise-agreement/ .
Also, about azure service to business incubator, I suggest you could contact the azure support to for more details:
Please contact support team by creating a support ticket at http://www.windowsazure.com/en-us/support/contact/
Or if that doesn't work because you don't have an active subscription you will need to contact general customer support to have them create a support ticket for you
http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Why my photobook in elements 10 does not give me the online services sizes options?

I am using element 10 and my photobook does not give me the online service size options.It only give me the 8.5 x 11 local printing option. Does anyone know what can i do to get other size options?

Not able to see it for PSE 12 too.I think online service sizes are off from Adobe side as Adobe controls these. Let`s wait for some time and check again.

HT201229 What if i blacklist a contact who sends opt in purchaces for their service?

What if i blacklist a contact who sends opt in purchases for their service? This has happened to me twice in 2013. when I receive the txt it says Welcome to IFortune Daily Horoscopes ...... $9.99 a month. Type STOP to quit. If you don't type stop FAST! like seconds i mean.... you get a follow-up message that says congrats we just billed you 9.99! or like that and I called to cancel it worked out fine.
Then again the next time it said like "AT&T free message" Your subscription purchase was successful iFortune horoscopes and more for $10.99 will automatically renew on xx/xx/xx also canceled successfully. my question is if I block these will i simply not see the message but be billed all the same?
Anyone?
Thanks!

Hi Magsrobby,
Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

HT1491 If I purchase one song from an albumn in iTunes, but later want to purchase the entire albumn, does iTunes give credit for the single song purchased, or will I be charged once for the single song, and then the regular full price for the albumn?

If I purchase one song from an albumn in iTunes, but later want to purchase the entire albumn, does iTunes give credit for the single song purchased, or will I be charged once for the single song, and then the regular full price for the albumn?

Welcome to the Apple Support Communities
You'll purchase the rest of the album, so you'll pay the same as the cost of the album but without the cost of the previously purchased song

I have an InDesign CC subscription, does that give me free website hosting through Business Catalyst, or do I need to upgrade?

I have an InDesign CC subscription, does that give me free website hosting through Business Catalyst, or do I need to upgrade?

Leopard (10.5) is not available as a download or as a disk purchase from Apple. You may find copies on e-bay for sale.
If your iMac can accept Snow Leopard (10.6), a disk can be purchased from the Apple online store.
Ciao.

How much space does apple give you for free in the cloud

how much space does apple give any user in the cloud

5Gb - http://www.apple.com/icloud/what-is.html

I'm very curious about cost of service. How can VZW charge such high cost for their service and Walmart sponsered carriers charge $49.99 for unlimited talk,text, and data per month?

We live in an area that does not have fiber optics for VIOS, or cable. Our service is received by either MIFI or Satellite service. I'm paying right now over $200 for my Jet Pack and Droid. I'm on a fixed income and I have End Stage COPD, so that means my quality of life has been lessened due to cost of service. Please explain to me the difference between the two services. Kevin.

demmo86rt wrote:
Most of those Walmart plans are prepaid, usually don't have the same coverage as postpaid, even from the same carrier, and can come with hidden fees. Not to say they are always a bad deal, but I would make sure you know exactly what you are getting.
Yep none of that will be 4G. Not on any phones that use Verizon's network. Only the Galaxy S 2 on Straight Talk will use "4G" on at&t's network and it's not even LTE is HSPA+. Also the fine print of the "unlimited" data says after 2 GB Straight Talk can throttle you down to 2G speeds and if you continue to use more than 2 GB a month they can cut off your service forever.

Print to Adobe pdf does not give option for .pdf file

I recently installed Acrobat X Pro. I have a 10-page pdf document open in Acrobat. I want to eliminate the first page and save the other 9 in another file. In previous versions, I would select Print and then select the printer "Adobe PDF". When I do this now, the Save As File Type gives me only one choice - All Files *.* - which is useless. If I am in any other application the Save As File Type comes up .pdf. I don't think it is the installation, because I installed this on my desktop and laptop and it is doing the same thing in both of them. The operating system for both computers is Windows 7 64-bit. What can I do to fix this? Is it just a matter of changing a setting that I am not aware of? Thank you in advance to anyone who will help.

For Acrobat X I went to Tools - Pages - and the delete choice was grayed out. I thought I could get the same result by using the Print to Adobe PDF command. From any other application I can print to Adobe PDF, just not in Acrobat. Does Acrobat X not let you do this, or is it just on mine? And if it is only on mine, what do I do to fix it? By the way, I am able to delete pages from other documents, just not the particular document I am currently working with.
Any other suggestions anyone?

Does Y.1731 support for VPLS service under ASR 9000 platform?

Hi All,
we are planning to setup OAM for monitoring performance of our VPLS service interface? By checked Cisco document, I couldn't find related document that can confirm Y.1731 support multi-point to mulit-point interface by full mesh topology in our environment.
Does someone have this kind of experience that could share with me? The document or configuration example are welcomed as well.
Thanks in advance,
Eric.

thanks Xander for your input!
on top of this question. Actually, I am looking for better solution to monitoring mutli interfaces at same time. In our environment, we have many of this kind L2vpn setup for customer. instead of monitor end by end, we want to monitor them from central point of view. do you have a better idea for this?
I attached one customer setup example below, and diagram as well.
At the meantime, we also looking for a good idea for how to setup hierarchical monitoring system that it could cross other SP domain.
thanks,
Eric.
PE-siteA:
============
L2vpn
pw-class encap-mpls
encapsulation mpls
bridge group customer
bridge-domain customer
   interface GigabitEthernet0/1/0/1.100
   vfi 100
    neighbor PE-siteB loopback-IP pw-id 100
     pw-class encap-mpls
    neighbor PE-ASBR loopback-IP pw-id 100
     pw-class encap-mpls
=============
PE-siteB:
============
bridge group customer
bridge-domain customer
   interface GigabitEthernet0/2/0/1.100
   vfi 100
    neighbor PE-siteA loopback-IP pw-id 100
     pw-class encap-mpls
    neighbor PE-ASBR loopback-IP pw-id 100
     pw-class encap-mpls
=============
PE-siteC:
=============
bridge group customer
bridge-domain customer
   interface GigabitEthernet0/1/0/2.100
   interface GigabitEthernet0/5/0/2.100
   vfi 100
    neighbor PE-siteA loopback-IP pw-id 100
     pw-class encap-mpls
    neighbor PE-siteB loopback-IP pw-id 100
     pw-class encap-mpls
==============
PE interface setup:
==============
interface GigabitEthernet0/1/0/2.100 l2transport
encapsulation dot1q 100
rewrite ingress tag pop 1 symmetric
=================================

Does anyone use Xfinity for their home Wifi?

If so, is yours very slow? Xfinity advertises lightning speeds but I am not getting anything close to fast! Please help!!

I have Xfinity and it works fine. Have you called Comcast? Are you only experiencing slow speeds on your phone or on all devices? On my iPhone, my Wifi was a slow so I did a full reset of my internet and then reset my phone's network settings. This seemed to speed things up.
To reset internet:
Unplug wireless router electricity and then follow the below steps. If you have phone service and your modem is also used for phone, it has a battery so you have to hit the reset button, you cannot just unplug its electricity:
Cable Modem Users
Reset your cable modem by pressing and holding down the reset button, located on the front or back of your modem, for five seconds. If there’s no reset button, then power cycle your modem.
To power cycle your modem:
Shut down your computer.
Unplug the cable modem from the electrical outlet.
Wait 10 seconds, then plug the cable modem back into the electrical outlet.
Unplug your router from the electrical outlet.
Plug your router back in.
Wait 30 seconds, then turn your computer back on.
XFINITY Internet & Voice Modem Users
Shut down your computer
Find the reset button on the back of the unit.
Use a pen or any pointed, non-metallic object to press the reset button until you see the lights on the front of the unit go off.
Release the reset button and wait for the unit to cycle up (this may take up to five minutes).
Unplug your router from the electrical outlet.
Plug your router back in.
Wait 30 seconds, then turn your computer back on.
Reset phone's network settings.

Does apple offer replacement for their iphone 5s battery issue in the philippines?? thank you

hello, im having battery problem on my iphone 5s. can someone help me out on this? thank you

You will need to take it back to the US for service. The warranty is not international. Next time buy the phone in the country you intend to use it. That way you will not be so sad.

Does anyone know BAdI for EEW table in Business Partner Master?

Dear Experts,
We added the customer tables like ZBUT0000* in BP by EEWB tool
and these tables appears in "Customer Data" tab successfuly.
Now we would like to do the input value check when users create/change the businesss partners in T-cd:BP,
but could not find any BAdI or customer exit.
BAdI "BUPA_FURTHER_CHECKS" seems to be good, but this BAdI is called by BAPI and not by T-cd:BP.
We think BAdI "BUPA_GENERAL_UPDATE" can be used, but we want to run the input value check
at the timing of pressing ENTER key, not the timing of before-saving.
Does anyone know which BAdI can be used?
If any further information is required, please let us know.
Any advice would be highly appreciated.
Thanks in advance for your help.
Regards,
F.T.

Hi,
please use any ways for search Badi's:
http://abap-explorer.blogspot.com/2008/07/how-to-search-for-badis-click-here.html
for example:
Method 3: Using FM SXV_GET_CLIF_BY_NAME.
These steps should enable you to find any BADI related to any transaction in a matter of minutes.
1) Go to the transaction SE37 to find your function module.
2) Locate the function SXV_GET_CLIF_BY_NAME.
3) Put a BREAK-POINT there.
Denis

Any suggestions for 3G service in Kenya?

Any suggestions for 3G service in Kenya?

If that's a problem with your cable company, change the company.
If your cable company is not able to provide you with a cable modem which gets you full performance for their service why would you bother with that company or try to make it better than them?
If you subscribe to a 100 Mbit/s service they must be able to provide you with a modem that does 100 Mbit/s and be able to demonstrate you 100 Mbit/s on your cable.
If they are unable to provide you with a modem which does 100 Mbit/s and thus cannot demonstrate that the service they have installed in fact can do 100 Mbit/s but only give you a 50 Mbit/s because that's the best they have, why bother buying yourself a better modem to find out whether or not their service does what it promises or not??
In addition, an integrated device won't get you better performance. On the contrary, consumer devices are generally single CPU (and core) devices. It's usually running some Linux or similar. If a single process gets overloaded it can drag down the performance of the whole device. For instance, let's say there is a bug in the print server software of the router. You print something and it hangs and the print server process on the router runs wild. Now the CPU is fully loaded and the routing performance will go down. If there is a bug in the routing software it will bring down the whole device and you can't even print.
You'll get the best performance if you use dedicated devices because then one device cannot overload another. Get a modem. Get a wireless ethernet router. Get a printer with integrated print server. That's far better.
It's like the all-purpose audio device compared to components...

"Failed to debug the Windows Azure Cloud Service project. The Output directory .... does not exist" - Looking for Solution Config Name Folder?

Good evening,
I've been working on and with a VS2013 Update 2 / Azure SDK 2.3 Cloud Service project for a while now and never had a problem debugging it (setting the .ccproj Project as Startup Project) but at the moment I cannot Debug it anymore - I always get the following
error message:
Failed to debug the Windows Azure Cloud Service project. The output directory 'D:\Workspace\Development\Sources\AzureBackend\csx\Backend - Debug' does not exist.
Now what's odd here, is the last part - the "Backend - Debug" is the Solution configuration name, ALL projects in that particular solution configuration are set to the Debug Configuration. The .ccproj file also only specifies Debug|Any CPU (and
Release|Any CPU respectively) as its output folder(s). Why is the Solution config appearing up there?
And more importantly.. why is this happening and what can I do?!
Thanks,
-Jörg
Ps: there seems to be a related
connect bug and these sorts of issues do appear around the forums but none contains a solution (neither reinstalling the Azure SDK nor cloaking the workspace/re-retrieving & building everything worked).

Good morning Jambor,
I already tried de-installing everything Azure-Tooling related including the Azure SDK, Restarting my machine and re-installing the SDK.
Same result. I can build the .ccproj perfectly fine and the cspack file IS generated perfectly fine, only debugging does not work and there's NO information in the VS output window (again - all projects succeed to build).
I tried explicitely running VS as Administrator, no change. I removed all IIS Express sites (as the ccproj has one web worker role), remapped my local TFS workspace.. nothing helped.
As building works, deploying to Azure Cloud Service (manually and via Publish inside VS) all works -perfectly-, I am pretty sure this IS a bug and I'd LOVE to help to get this fixed. As I said, currently I cannot debug and/or run & test my work, hence
I cannot do ANY work.

HT201529 I bought my iPhone from Verizon and having their service. Does my iphone has a default SIM PIN?

I bought my iPhone from Verizon and having their service. Does my iphone has a default SIM PIN?

The 4G LTE SIM card in your device contains information about your plan, device and more. You can set a SIM PIN so others won’t be able to access that information if your SIM card is removed from your device.
If you remove your SIM card and insert it another device (e.g., when you upgrade to a new device), you’ll be asked for the SIM card PIN. You can find your SIM card PIN in My Verizon if you’ve forgotten it. Or, if you’ve entered your SIM card PIN unsuccessfully 3 times, you’ll need the PIN Unblocking Key (PUK) to unlock your SIM card again. After using the PUK, you’ll need to create a new PIN for your SIM card if you want to secure it again.
To locate the SIM PIN / PUK numbers for your 4G LTE SIM card:
Navigate to the Overview page in My Verizon.
Click My PIN and Unblocking Key (PUK) under About My Device.
Your default PIN and PUK will be displayed in a pop-up window.
Click Close when you’re finished to return to the My Verizon Overview page.
You’ve successfully located your SIM PIN and PUK.

Does Azure give deals for their service to business incubator companies/incubators?

Similar Messages

Maybe you are looking for