Does DW CS3 write code to process CDO forms?

Thanks.

Yes.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"smiffy47" <[email protected]> wrote in
message
news:ga1gov$qo3$[email protected]..
>I have been using DWmx2004 and been told that the User
Authentication code
>it
> writes for User Authentication (and other Server
Behaviours?) is outdated
> and
> incompatible with PHP5. It certainly seems to lead to
error reports and
> problems. Does DW CS3 improve on this?
>

Similar Messages

Does DW CS3 write better php than DWMX2004?

I have been using DWmx2004 and been told that the User
Authentication code it writes for User Authentication (and other
Server Behaviours?) is outdated and incompatible with PHP5. It
certainly seems to lead to error reports and problems. Does DW CS3
improve on this?

Yes.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"smiffy47" <[email protected]> wrote in
message
news:ga1gov$qo3$[email protected]..
>I have been using DWmx2004 and been told that the User
Authentication code
>it
> writes for User Authentication (and other Server
Behaviours?) is outdated
> and
> incompatible with PHP5. It certainly seems to lead to
error reports and
> problems. Does DW CS3 improve on this?
>

Learn to write code for app

I am brand to new creating an app or writing code. I just thought of an idea for an app that isn't created yet so I wanted to reseach how to do that. I understand it will take a long time to learn how to write code and everthing else that goes into creating an app. I just want to know from everyone out there what your suggestions are for learning how to do that. I know there are books and websites and a whole lot else out there stating they are the 'best' at teaching how to write code, but I want some of your opinions on what really is the best way to learn. Thanks!

Hi brad344. I too am just beginning to learn how to make Mac Apps.
As Mark says, "Save your $99..." until you're ready to publish your app. Note that if you're developing mobile apps (iPhone, iPad, etc), you cannot test your app on a mobile device unless you buy the iOS developer account.
If you are developing Mac apps, I would recommend the book "Cocoa Programming for Mac OS X Fourth Edition" by Big Nerd Ranch. I'm in the process of reading it. Though it can be somewhat in-depth, if you have the talent of app development, you'll be able to figure it out
I also bought the book "Programming in Objective-C Fourth Edition" Developer's Library. I've finished this book and I didn't find it as useful as the other book for developing apps, although it does provide some good fundamentals.
You can also get some good information at the Mac Dev Center online. It's a good in-depth resource center, for example it provides good info on icons, code signing, user interface guidelines, etc.

The question about EDI in scenario 'Cross-Company Code Sales Processing'?

I'm doing the exercise with IDES system for the scenario 'Cross-Company Code Sales Processing'.
But when posting the EDI, it gave me the error as followings:
there are related data in table EDPP1, including customer and vendor data, but it still informed me the questions.
pls help!
Object 0090033869
Output type: tst IV for MM by ken
Processing log for program RSNASTED routine EDI_PROCESSING
EDI: Partner profile not available
EDI: Partner profile not available
    Message no. E0332
Diagnosis
    A partner profile could not be found with the following key:
    /0000000000/LI/
    This involves the key fields of the table EDPP1:
    -PARNUM partner number
    -PARTYP partner type
Procedure
    Please check the EDI partner profiles.
    Execute function

Hi
Partner profile is not seems to be maintained in tcode WE20.
Please maintain in WE20.
Kind Regards
sandeep

How can i write code in Inbound ABAP proxy method

Hi,
All
Iam doing server proxy ascenario
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
i have done
steps:
1:I have done inbound proxy interface in xi
2:i have created a inbound abap proxy in my SAP WEB AS6.4 using SPROXY.
3:I need to write code in Z11_EMPDETAILS_IN~EXEXUTE_ASYNCHRONOUS method
if i double click on that method it is not opening how can I write code.

Hi,
You have to goto the class
<b>ZCL</b>_EMPDETAILS_IN~EXEXUTE_ASYNCHRONOUS not
<b>Z11</b>_EMPDETAILS_IN~EXEXUTE_ASYNCHRONOUS
Check on the third step.
Regards
Vijaya

HT1338 What does a medium write error mean, when trying to burn a cd?

What does a medium write error mean, when trying to burn a cd?

nwalls wrote:
What does a medium write error mean, when trying to burn a cd?
It's an error message returned by the burner. You can see the full list of these error messages here
<http://en.wikipedia.org/wiki/Key_Code_Qualifier>
It's not specific enough to pinpoint what caused it—it could be anything from a bad optical medium (CD-R) to a dusty or dying laser diode. You have to isolate the problem—use a different CD-R brand, try a different speed, use a different burn engine (eg, Burn), etc. If it occurs once or twice, randomly, it's more likely to be a bad disc. If it occurs consistently, and at the same stage of the burn process, it's more likely to be a drive or software issue.

Process local form and write to local file?

I've written a form using alot of JavaScript. It is intended to run on a local machine and I need to write the information to a local file. Is this easily done using javascript to process the form?
If so, please point me in the right direction.
Thanks much,
Mike Rieck

Ok, so here's another possibility I'm thinking of.
My need is to have our salesmen fill out the form (quote request) offline, then when connected to the Internet, submit the info via e-mail or posting to an application on our company server.
Since my form has many questions that will never get answered, depending on the path the user takes, I could create a smaller form by opening a new window with javascript and writing the pertinent values of form 1 as the default values for the new form. Then ask the user to save the new form to their hardrive and either e-mail it or post it, at a time when they are connected to the Internet.
To add additional functionality to this process, I want to take the form and process it into a formal RTF formated quote.
From what you've explained, I can either write a Java application to process the form on our server, or I could ask the salesman to e-mail the 2nd form as an attachment, and I could write another program in any language to write the RTF file on the local machine of the e-mail recipient.
If I choose the posting option, what are the possibilities of getting the RTF file to someone inside the same office as the server, without the salesman having to download the RTF file and then e-mailing it? Also, how difficult does this sound for someone new to Java?

How to write code for page up and page down buttons on alv screen?

Hi,
Page up and page down buttons are not working in general alv report. Thease buttons are in disable mode. But is stnd. transactions (tcode : fbl5n) these are enabled and working properly, but we can't debug this with /h
How to write code for page up and page down buttons on alv screen?

Poonam,
On doing the screen debugging it took me over to    Include LSTXWFCC ,kindly check the below code.
module cc_display.
fcode = sy-ucomm(4).
case sy-ucomm(4).
    when 'P--'.
      perform cc_firstpage.
    when 'P-'.
      perform cc_prevpage.
    when 'P+'.
      perform cc_nextpage.
    when 'P++'.
      perform cc_lastpage.
    when 'EX--'.
      perform cc_firstcopy.
    when 'EX-'.
      perform cc_prevcopy.
    when 'EX+'.
      perform cc_nextcopy.
    when 'EX++'.
      perform cc_lastcopy.
I guess it can give you some lead.
K.Kiran.

Any way to write code to cache the contents of the scripts menu? (or force ScriptsMenu plugin start)

In the scripting forum I created the thread Adding custom scripts to actions revisited - Partial workaround
Basically, you can create actions with keyboard shortcuts to execute custom javascript/vbscript, etc. and successfully reload them after restarting Illustrator but only if the user manually navigates to File->Scripts before manually loading an actions (.aia) file
Any script menu items added to actions will be stripped from the custom actions when Illustrator is restarted because, I believe, the script menu items are not cached and are therefore invalid when the actions are automatically reloaded.
Obviously, I'd prefer not requiring the user to navigate to the scripts menu and replace the actions every time Illustrator is started.
Does anyone have any ideas on a way to write code so that Illustrator caches the contents of the scripts menu? Preferably this would be before the actions are loaded so they don't get invalidated and need to be reloaded in the first place. A keyboard macro would likely execute to late to be of much help.
If anyone knows anything about the actual mechanism of caching the scripts menu or knows of anything else relevent to this please respond.
Thanks!
Edit: The menu is created in the Scripts Menu plugin (ScriptsMenu.aip). Perhaps there is no "cache" of the menu and the plugin just doesn't perform the startup until you browse to the File->Scripts menu?
AIMenuGroups.h has the global definition of the group:
#define kScriptsMenuGroup "ScriptsMenuGroup"

Have you looked at stored outlines ? They are for plan stability.
Also you may want to look little deep on where your statistics are going wrong.
I would recommend using below hint and checking where is difference in estimated(E-Rows) and actual number(A-rows) of rows. This may point out some incorrect stats.
e.g.
select /*+ gather_plan_statistics */ * from dual;
D
X
select * from table(dbms_xplan.display_cursor(null,null,'ALLSTATS LAST'));
Plan hash value: 272002086
| Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers |
| 1 | TABLE ACCESS FULL| DUAL | 1 | 1 | 1 |00:00:00.01 | 3 |
------------------------------------------------------------------------------------

Invalid return code of process [bootstrap] (exitcode = 128)

Hi all,
I get the following message when starting my dialog instance:
ERROR => invalid return code of process [bootstrap] (exitcode = 128) [jstartxx.c 1642]
JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc = 128)
JControlCloseProgram: started (exitcode = 128)
JControlCloseProgram: good bye... (exitcode = 128)
The central instance starts without problems. But the central instance is running
on an other server (physically) than my dialog instance.
Does some know the error code 128, ic cannot find any information about that error code in other threads.
Really thanks for helping me...
Steve

Hi Nor Azly Mohd Nor,
I have the same problem... not exactly because my dev_jcontrol log have the following error...
it´s approximately but my error said, as you see next, exitcode = 66 and not 128 as such error that was report...
Fri Dec 05 10:56:59 2008
*** ERROR => invalid return code of process (exitcode = 66)
JControlExecuteBootstrap: error executing bootstrap node (rc = 66)
JControlCloseProgram: started (exitcode = 66)
JControlCloseProgram: good bye... (exitcode = 66)
You told in your last post that you have the correction for the error reported... "If the issue is not solve, I might have the solution for you."
Would you mind to tell me what your sugestion by solve this problem??
Best regards,
Thanks in advance,
Joao Dimas

VMWare - Hyper-V Conversion Failed: Does Not Have Write Permissions

Hey Guys -
Today I've been trying to convert a VM from VMWare Workstation to Hyper-V. I have it in VMWare Workstation and not ESX because I'm working from home currently. My Hyper-V server is also local and hosted on a new Windows Server 2012 R2 build.
When I try to convert it at the end of the process, I get the below error:
Blocking Issue(s):
1: UNC Path "\\192.168.0.10\VDisks\Nagios Log Server" is not valid or does not have write permissions
Warnings(s):
1: The number of USB devices configured on the VMWare guest machine is 1. The USB device (window cuts off here)
2: The video memory configured on the VMware guest machine is greater than 4 MB. The vid (window cuts off here)
Below is a screenshot:
Environment
- Hyper-V server is on a separate system running Windows Server 2012 R2
- VMWare Workstation is on the PC I'm running the converter on. The source VM is shared and I have Workstation configured to share on port 444 (443 is taken)
- Hyper-V Server is on domain - VMWare Workstation Computer is NOT joined to that domain - however - when choosing VM I connected with the domain credentials and browsed to select target folder - not just typed it in.
- I'm using Domain Admin credentials and the VDisks share is set to have full access to the account
- I can connect to target share via Explorer and write files / create folders successfully
- VMWare Workstation version 11 running on Windows 8.1 Update 1 x64
Any ideas or suggestions? Thanks!
Ben K.

Hi,
in my case it worked when the Server(-VM) on which we installed the MVMC AND the target-file server were joined to the domain.
We also created a domain account, which has write-permissions to the target fileshare. We used this domain account for logon on the MVMC-machine and for running the MVMC Wizard.
Hope that helps
Regards
Robert

Hp officejet pro 8100 and it does not print bar codes from UPS or USPS

have an hp officejet pro 8100 and it does not print bar codes from UPS or USPS. Can you please please help? i have used my ipad, by HP G62-355DX Notebook and neither will give me printed bar codes. The balance of the mailing label do print, just not the bar code. It may be my imagination, by I believe it used to print thebar codes.

Hi,
Try adding an alternate driver and try to print.
To use an alternate print driver for HP printers in Windows 7:
1. Click on the Start menu.
2. Click on Devices and Printers.
3. Click Add a Printer
4. Add a local Printer
5. Select Create a New Port
6. Select Standard TCP\IP port
7. Enter Printer IP address (Printer IP address can be found by printing network config page from printer
8. Under Manufacturer select HP and under printer select HP Officejet 8000 pirinter or Officejet 7410
9. Click apply and try printing
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

I have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

i have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

Try putting it into "Disk Mode" http://docs.info.apple.com/article.html?artnum=93651
Then with it in this mode connect it to the PC and try to run the latest iPod updater to do a restore and update software if you have the option. the latest iPod updater is 2006-03-23 and can be downloaded here http://www.apple.com/ipod/download/

How do I write code for a website that is viewed in different browsers?

Hello. My website looks fine when using the Firefox and Safari browsers. But when I went to the library and viewed it using Internet Explorer, it looks bad. It doesn't look the way I want it to. Many of the elements are in different positions, etc. I thought about how to correct this. And I'm guessing that another html file can be created with another style sheet attached and designed just for Internet Explorer. But then I thought about how the server would determine which file to use when the visitor types in the URL. I have no idea how to do this. I would greatly appreciate knowing how to write code that enables visitors, whether they use Firefox or Internet Explorer, to view my website that has the same style and elements in the correct positions on each webpage. Thank you very much.

You need to close your img tags (shown below in red).
<img src="images/home_page/snowscene_web.jpg" />
<img src="images/home_page/2011-1_201_p5_christians_nora_pixel2_2_web.jpg" />
<img src="images/home_page/poster_final_web.jpg" />
Your home page looks OK in IE8 & 9 but looks bad in Compatablity Mode (which is essentially IE7). Try adding this META tag just below your <title> tags. This will force older IE browser into IE8 or IE9 standards mode if it's available. IE7 is pretty much obsolete now.
<meta http-equiv="X-UA-Compatible" content="IE=edge">
Nancy O.

I Want to make an app.. but i dont know how to write code or use Xcode... where I can begin?

Hey!
I just graduate from high school.. im gonna study Computer Enginnering. Im working for my family and they need an app that works like iBook. We have the eBooks and then they want me to do an app where they can sell the eBooks and read them. I have Xcode, but I dont know how to write codes or where to begin in all of this. I want to make the app first for iPad but if it can be for both iPad and iPhone better. I just want recommendation and help. Please and Thanks!!

hello i hope your having a good day but can you reply to me if you got the codes to make an app because i want to make an app too thanks

Does DW CS3 write code to process CDO forms?

Similar Messages

Maybe you are looking for