Does Home Share only work when you are at home? Or once you've shared will the music stay on the computer you've shared it with?

I want to use Home Share to share music in i-Tunes between my desk top and my laptop. Does it work once you're not in the same house?

If you use home sharing to transfer music to your laptop, it stays on the laptop and you can take it anywhere.
Look at Understanding Home Sharing: http://support.apple.com/kb/HT3819 where it says "With Home Sharing, you can stream music and video from one authorized computer to another, or simply drag music between computer libraries. You can also choose to have iTunes automatically import purchases you make on any of your Home Sharing computers to your own library."

Similar Messages

Iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
Regards.

MAC VBA Code workbook close only works when breakpoints are set - fails when no breakpoints

We have an Excel Product that we are trying to get to work on the Mac. One of the worksheets displays a disclaimer, and if the user clicks on the I Don't Accept radio button and then clicks next, the workbook is supposed to close itself. The
code is quite simple:
Public Sub HandleNextButton()
Dim filename As String
Dim opened_workbook As Workbook
If AcceptsDisclaimerChecked Then
FinishSetup
Else
   ThisWorkbook.Saved = True ' Realize this is redundant based on false on the next line.
ThisWorkbook.Close False
End If
End Sub
All of our product sheets are protected by a block of code attached to the Workbook_BeforeClose event:
Only allow a save if privileged, otherwise mark the workbook as saved
Private Sub Workbook_BeforeClose(Cancel As Boolean)
On Error Resume Next
If ThisWorkbook.Saved Then Exit Sub
' If this user is not allowed to save, then cancel the save
CM_Settings = LoadRegistrySettings
If (CM_Settings And 4096) = 0 Then
Me.Saved = True
Else
   ' If the workbook is saveable, then turn on the image to protect the data.
   ' saving the workbook triggers the Workbook_BeforeSave which shows the veil
   Me.Save
End If
End Sub
This works fine on the PC. On the Mac, the workbook does not close. I can see the button fire, and when it gets to the point where the workbook is to be closed, nothing happens.
However, when I put a break point on the first line of the Workbook_BeforeClose, I can briefly see it reach the breakpoint (the line turns yellow), and then the workbook immediately closes. A breakpoint anywhere in this routine causes the same
behaviour, the close works correctly. No breakpoint, no close. Commenting out the Resume Next has no effect. The only thing that will cause the work book to close, is to put a break point on on the On Error Resume Next in the code. If
the workbook.Saved=True is commented out, the Workbook_Close code will exit, at the first if statement, but the workbook will not close.
Does anyone have any clues to this bizarre behaviour?
Thanks, Neil
Neil M. Johnson

There is a difference between MAC and Windows based VBA code. I'd suggest asking MAC related questions on the
Office for Mac forum instead. The current forum is for Windows based developers.

Why does my volume control on my iPod touch only work when i have Earbuds or Headphones or a speaker connected to the headphone jack, and not also when there is nothing in the jack?

I can't adjust the volume of the iPod Touch when it has nothing plugged into the headphones jack, but i can adjust it when i have earbuds or headphones or a speaker ;plugged into the iPod Touch

Try cleaning out/blowing out the headphone jack. Insert/remove the the headphone plug a dozen times or so.
Try the following to rule out a software problem.:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store since you likely have a hardware problem. Could be a bad headphone jack.
Apple Retail Store - Genius Bar

Why does my audio only work when i put water on the audio plug?

whenever i want to listen to music, i have to put water, or some liquid on the TRS (audio plug for earphones) for it to work. It will not detect an earphone without water. There is NOTHING wrong with my earphones, they work in other things without water. They are iFrogz. I need help really bad because i dont want to carry a water bottle on the bus and dip my cord in it JUST to listen to music. It is really annoying
Ipod Nano 7g Blue

It sounds like a hardware problem, so it's probably not something that can be solved without repair (or replacement). There may be a fault in the headphones jack that affects contact with headphones plug. Water is an electrical conductor, so it improves the connection enough so it works temporarily. That's my theory... But because water is an electrical conductor, it can cause a short circuit that may damage the iPod. That's why the warranty is voided if you accidentally get your iPod wet.
You can check your current warrany coverage with the iPod's serial number, here
https://selfsolve.apple.com/agreementWarrantyDynamic.do
I believe Apple uses the serial number most of the time, to verify coverage. If you have an Apple Store nearby, there are Apple tech support staff at the store's Genius Bar. You can make a reservation (to avoid a wait) using the store's web page.
http://www.apple.com/retail/
Otherwise, you can contact Apple tech support through the "Contact Us" web page
http://www.apple.com/contact/

Why does my sound only work when I hold the top left corner and the bottom righthand corner and no sound any other time??

This is my second iPad 2 and I have only turned it on and the sound does not work???

thanks i did reset it but its still the same
i phoned apple store n they said it was something they werent sure about
so i have to make a 50 mile trip to get it seen to n yet it should have been
a brand new one! i think it must have been a referb that wasnt fixed
thanks for the reply

Why does my mac only work when plugged in?

I have a late 2010 macbook air 11 inch. The battery condition is normal and about has 650 cycles. The light on my charger is green and my computer only stays on when the charger is plugged in. When I unplug it the computer just turns off and my battery says its not charging and that the power source is the adapter. Do I need a new one or is this fixable?

Definitely below the 1,000 max cycle count > Mac notebooks: Determining battery cycle count
Reset the SMC > Intel-based Macs: Resetting the System Management Controller (SMC)

Why does drop shadow on text only work when you rotate?

I can't get the drop shadow to work on text while keeping it aligned horizontal. Seems to only show up it I rotate the text. Goes away when I put back horizontal. Frustrating. Just want to drop shadow text with out rotating. Can anyone advise on this? Thanks in advance.

This was discussed here for many times.
Drop shadow on text isn't implemented, because many browsers don't support it.
If text has to be converted to an image (system fonts, rotating etc), shadow can be applied, because this effect will be part of the image.
Look here:
Appllying effects, shadow, bevel, glow to text

Link to published course only works when you right-click open in new tab/window (Firefox)

I have encountered an issue where my published captivate course will not load correctly (all I get is a black screen) in Firefox when clicking on the web link. All I get is a black screen. Refreshing doesn't help either. However if I instead right click on the hyperlink and select "open in a new tab" or "open in a new window" the course loads properly. I have been told that it works just fine in IE and Chrome.
If any of you would like to test this in Firefox visit http://www.wakeprecinctofficials.com/p/training-resources.html and the link in question is called the Laptop 101 Online Course. I appreciate any help. Thanks

I tested your link in Firefox 3.6 and IE9. Black screen only in Firefox. Works fine in IE.
Try removing the lines above the <HTML> tag that say:

Telnet only works when there are two sessions?

We have several 3750X switch stacks that have suddenly started requiring two active telnet sessions to do anything with the stack. Very simple example, but applies to all aspects of switch administration:
Session 1 - issue "sh int statu" command (carriage returns and output stops)
Session 2 - issue same "sh int statu" command (carriage returns and output stops and session 1 now shows the output from the session 1 initial command)
This makes switch administration a real challenge. No config changes to the stack(s), just started happening one day...
Model# WS-C3750X-48PF-L
SW Image: c3750e-universalk9-mz.150-2.SE5.bin
H/W Version: 3

You are are probably encountering a bug in the version of IOS you are running.
Open a ticket with TAC. They probably recommend an upgrade.
HTH

Broadcast safe now only works when clips are nested?

Am I crazy or is this true? Just started working on FCP 7.0.2....
Dropped a broadcast safe on a clip. The excess luma still shows in the video scopes. Nested the clip, dropped the broadcast safe on it, now all seems to be fine.
Is this new behavior in 7.0? or, am I insane / imagining things?
Thanks

Strange but true Mark, just tested and see the same behavior here ... I don't generally use the BS filter myself as I've never found its corrections suitable for the specs I need to adhere too (I prefer to legalise manually) so never noticed this before. Odd find.

Does Siri only work when connected to WiFi

Does Siri only work when you are connected to a Wifi? Mine does not seem to work through the 4G cell network.

It works over WiFi or cellular.
If you are using 4G cell network, are you using something like a Verizon MiFi 4510L to create a hotspot that your iPhone 4S is using?
There are other issues with Siri that are going on - perhaps that is what you are seeing?

My iPod only works when plugged into a wall socket!

Anyone know why my iPOD only works when plugged into a wall outlet? I tried it on the Bose docking station and also my MacBook and it won't work!
Any ideas??

Sounds like a dead battery. You can have Apple swap out the battery for a flat fee or you can send it to a third party service center to have them do the same for job a little less.
B-rock

Does home sharing only work if you're connected to the wi-fi?

Does home sharing only work if you're connected to the wi-fi? Im having very sporadic results with this. I thought Apple products worked. Home sharing is not working from my windows operating system to my iPhone 4S nor my iPad.

Hi ccvitality,
If you are having issues with Home Sharing between your Windows machine and your iOS devices, you may find the following article helpful:
Apple Support: Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Regards,
- Brenden

Does iMessages only work when writing to people who have i05, or can you write to people using other systems ?

I have an iPad 2, but have never yet been able to send a iMessage....does this only work when writing to people who also have i05, or can you also write to people who use other systems ?
iMessages is turned on on my system, but even when writing to people who I know have iPads or iPhones , I just get the red exclamation mark....
Sending messages on my iPhone seems to work okay when sending to non iPhone users, so I don't understand what's wrong here .

From http://support.apple.com/kb/HT3529 :
iMessage allows you to send unlimited text, photos, videos, locations, and contacts using Wi-Fi or 3G* from your iPhone, iPad, or iPod touch to other iOS 5 users.
Note: On iPhone, if iMessage is unavailable, the message may be sent as SMS or MMS, depending on content. Carrier messaging rates may apply. You can turn this on or off in iPhone at Settings > Messages > Send As SMS. Messages sent using iMessage will appear in a light blue bubble, while messages sent using SMS or MMS will appear in a green bubble.

Does Home Share only work when you are at home? Or once you've shared will the music stay on the computer you've shared it with?

Similar Messages

Maybe you are looking for