Does label template copy work at all?

Hi,
i hadn't time to investigate if this is a known problem, i must dash in 5 minutes, however i tried both on apex.oracle.com and on my local apex instance, both version 3.0.1, and i can't get the "label template copy" to work.
I click on the copy icon on the right, i put the name of the new label template, i get the success message "template copied", but there is no trace of the new label template.
All the report filters are disabled.
Can someone else confirm this or am i just dreaming?
Bye,
Flavio
http://www.oraclequirks.com

Hello,
Yup sure looks like a bug if you use that icon. Thanks for catching that.
You can still copy the template using create and then picking
Create
Label
As a Copy of an Existing Template
Carl

Similar Messages

Pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 via blutooth (firmware prob) to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all

pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.

Dear Valued Pioneer Customer:
We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device. If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
This firmware update may be used only with the following 2012 Pioneer products:
CD Receivers
DVD Receivers
DEH-P8400BH
DEH-P9400BH
DEH-80PRS
AVH-P2400BT
AVH-P3400BH
AVH-P4400BH
AVH-P8400BH
In order to perform this update, the following items are needed:
A Pioneer CD or DVD Receiver above with built-in Bluetooth
Laptop with built-in Bluetooth running Windows® 7
Bluetooth firmware update (HW05-SW01.27.20)
How to Obtain the Free Firmware Update
1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
How to Determine if the Firware Update has Already been Installed
CD Receivers:
• With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
DVD Receivers:
• With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
Questions
If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
Sincerely,
Pioneer Electronics (USA) Inc.

Trying to update my Itunes software, now it does not want to work at all, givin strange error messages.

Trying to update my Itunes software, now it does not want to work at all, givin strange error messages.
First, when trying to sync ipod touch to Itunes, nothing happened. After that, Itunes suggested downloading and installing updates but now updates will not finish installation correctly and launch error messages. Any ideas?
TKS !

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736B3s, or a different error code? If they're different, what codes are you getting in Windows Update?

Does iMovie 08 actually work at all?

Long story short, I was trying to make a dvd of some old movies of our family for my daughter's upcoming wedding. The movies are in .mpg format. iMovie won't import them as .mpg. After reading some articles and forum posts I googled, I've used MPEG Streamclip to convert them to DV (which iMovie wouldn't import) and to .mov (again, which iMovie wouldn't import) and so I'm stuck. So, does iMovie actually do anything at all besides suck up space on my drive? If so, you couldn't prove it by me.
<Edited out by the Hosts>

MPEG Streamline has a mass of options to choose from when converting video formats - which unless you have some pointers, can produce some very ******* language.
So here are a few snippets of information I've learned from a few other users and claim no credit for the advice, well except to say thank you to the original posters for their help and assistance.
So here goes...
In order for you to be able to import your DVD footage into iMovie 08 you need to change the format of the video files.
I use MPEG Streamclip which is a free download from http://www.squared5.com/ to convert the video.
Once you have downloaded the software and installed it, pop your DVD into your iMac, open up Streamclip, then click FILE > OPEN DVD > Select the DVD from the Devices. You should see VIDEO_TS but ignore this, simply click on SELECT, then select from the drop-down list which track on your DVD you wish to open and click on Select.
After a few seconds the video should open in a new window. If you see 'Warning, the stream may have timecode breaks', click 'FIX NOW', the next page opens, make sure that 'DO NOT SKIP ANY FRAME' is ticked and click 'PROCEED'.
Wait until the video is processed and the opened page shows the video.
Now click on FILE > EXPORT TO QUICKTIME, select compression 'APPLE DV - PAL' from the dropdown menu, and move the quality bar to 100%. Click on 'Make movie'.
From the next page rename the video footage to something more memorable, and save it to th Desktop or somewhere else NOT the DVD which it defaults to - if you forget it will fail!!!
You can now import this video footage into iMovie 08 using the FILE >IMPORT MOVIES from within iMovie 08
Sailingmaster, I hope this helps you out with making a DVD for your daughter's upcoming wedding, and note, I've been using iMovie 08 for approx two months now, and find it extremely intuitive to use.

Officejet 4622, new printer today. black does not seem to work at all but all the colors do.

I print a test page through diagnostic tool and black square is blank. I cannot tell if the alignment prints properly as I have no example of what it should look like to ensure it is correct since the alignment fails to detect the alignment page. Scans work fine. I tried cleaning the print heads and still don't seem to get black to work correctly. This is a new printer purchased today 9.30.2012.

just in case anyone else encounters this problem, heres whats really going on and heres how to fix this annoying issue. its relatively easy to do and more efficient than wasting money on a new printer or having it repaired like most people end up doing.
whats going on? the ink has clogged the printing heads and has solidified shut. the "clean print heads" feature the printer came with does not have the ability to fix this. that feature is to clean up dirty heads, not clogged heads. why hp decided to make this model without a simple to remove cradle is beyond me, but fortunately the cradle DOES come out and can be cleaned with hot water.
theres a few items you will need to make this happen the easy way or you could just break out the tree limb loppers, like i did, and vent your frustrations.
what you will need: a pair of needle nosed pliers, a T9 torx screwdriver head ( auto parts stores sell them for a couple bucks), some paper towels and an area to work (its easiest to do this in a corner of a room, on a small table or the floor). keep in mind you are dealing with ink, so change out of your good clothes just in case and also grab a paper plate or a few sheets of printing paper to set the ink cartridges on as you work.
1) ok. lets get started. !!!FIRST UNPLUG THE PRINTER RIGHT NOW, SO YOU DONT ACCIDENTALLY DIE BY ELECTROCUTION!!! i forgot and when i began unscrewing the first 6 screws, the chime kept going off and im like **bleep**? i was impressed by the safety measures hp took while engineering this model.
2) the printer is now unplugged and then go to your corner work area and place the printer so there is a wall or barrier on its left and also a wall or barrier behind it. do this while facing it as if you were about to use it.
3) now, what you have to do is open the printer like you are going to change the ink and on the right side there is a plastic guide that prevents the top from opening all the way. look on the side and you will notice it could pop off with your fingers. pop it off and open it all the way open so you could get at the screws the lid would have prevented you from accessing.
4) lean the scanner portion and top portion against the back wall.
5) all screws you will be removing are size T9H torx screws. there are ten total. there are 2 black screws in the front top and then 4 black screws in the back top. remove them and put them on your paper plate.
6) next is 1 short silver colored screw located under the control panel, use your finger and feel around beneath the * button. unscrew it, put it on the paper plate.
7) next you are going to remove the face/control panel to get at the last 3 screws so locate the little illustrations on the top of the printer, there are 2 on the bottom left and 5 on the bottom right (1 and 2 on the left explain paper jam removals and then 1-5 on the right explain changing ink cartridges). then about half an inch south of the number 5 illustration, on the lip, is a plastic bracket. six inches to the left is another one then 6 more inches to the left, under the illustration number 2 (paper jam removal) is a third bracket. undo them using your fingernails. and just flip it up like car hood and then lay it down on the main top portion of the printer, minding the flat wire which is connected into the circuit board of the control panel (if the flat wire popped out because you got too rowdy on it, then simply insert it back in when you reassemble).
8) next, unscrew the 3 longer silver screws which are located under the panel you just popped off. there is 1 on the left and 2 on the rightish side. toss em on the paper plate.
9) now that all the screws are removed, take the face panel and partially pop it back together.
10) then take the whole top ( the part with the little illustrations and lift it like a car hood, ONLY THIS TIME OPEN IT TO THE LEFT and balance it on the edge of the printer, leaning it towards the wall or barrier on your left. BE CAREFUL NOT TO YANK ON THE FRUIT STRIPE COLORED WIRES ON THE LEFT AND ALSO THE BLACK FLAT WIRE THAT CONNECTS THE SCANNING PORTION TO THE MAIN PORTION OF THE PRINTER.
11) next grab the needle nose pliers and remove the 2 silver colored tension springs located behind the printer cartridges. pay attention where they were attached so you remember where they go during assembly. take a pic with your phone if you have to or simply re-figure it out like i did. toss em on the paper plate.
12) then disconnect the 2 large flat wires and 1 small flatwire attached to the back of the ink carriage. take a picture or remember like i did. i imagine bad things may occur if you reverse them on re-assembly. grab the phone and take a quik pic to be sure.
13) now remove the ink carriage, cartridges and all, by lifting the front first. be careful of the little transparent ribbon in there that moves the carriage left to right and vice versa. you dont want to damage that little guy. now take the carriage to your paper plate. dont drip any ink or accidentally get it on your fingers without knowing or you will make a mess.
14) remove the ink cartridges and set them on the paper plate, ink side up to avoid a mess, these things sometimes drip. set the plate off to the side. its time to clean the print heads.
15) then go to the sink, with the empty ink carriage and turn the water on hot and then just let the empty ink carriage sit there with the water mainly going through the screen of the clogged color (inspect and make sure there isnt a little rubber gasket surrounding the little screen if there is dont lose it. i didnt look too closely and i dont think hp has them but i know some other printers do). it wont stain the sink but wash down any ink as it comes out to be sure. also notice there is a small circuit board attached to it. dont bang it up but getting it wet doesnt matter.
16) keep doing this until the water runs clear.
17) then use your finger and rub the screen gently with your finger and then rinse it, washing away the ink until the water runs clear. continue this until there is no more ink and the screens are clean. do it to all the colors just for good measures. the problem color that wouldnt print, you will notice takes longer to clean than the other colors.
18) now look on the bottom side of the carriage. those wierd looking things are the heads. rinse them with hot water and wipe them with paper towels. then flip it over and blast the screen side again. also in between the screenside and the heads (on the side of the carriage) is an opening that is also probably gunked up. blast it with water too. then flip it over and wipe the heads again. repeat this step until nothing wipes away or until you are sick and tired.
19) shake off then use paper towels to dry the entire unit. make sure the unit is dry. especially inside the female plugs. blow in it or break out the hair dryer and gently dry it. dont sit there and melt it though with the blow dryer. but the sooner it dries the less likely your ink cartridges sitting on the paper plate will dry out. the ink wont dry out fast just dont take a nap or go out on a date until you are reassembled with the ink portion.
20) now you have completed the cleaning of the heads and probably wont need to do this again for the length of time it was since you bought the printer. and just like a roadtrip you used a map to navigate, you will use these instructions in reverse for re-assembly. but keep in mind when re-inserting the 3 flatwires you disconnected from the back of the ink carriage, make sure you have the little metal contact points on the flatwires (male side) inserted so they touch the little metal contact points on the carriage plugs (female side). ALSO BE EXTRA CAREFUL NOT TO DAMAGE THE BLACK FLATWIRE CONNECTING THE SCANNER PORTION TO THE MAIN PRINTER PORTION. THERE IS A LITTLE GROOVE IN THE PLASTIC WHERE IT CAN BE SEATED TO GUARANTEE NO CRIMPAGE. USE IT. also make sure the 2 hinges of the scanner portion/lid are seated properly before fastening the the top with the 6 black screws.
now re-assemble the printer and reinstall the ink cartridges. and then plug in the unit, and turn it on. if you get any notifications on the control panel saying the carriage wont move, then open the hood and take out the ink cartridges, push around and make sure the carriage is seated properly and that the tensioner springs are in place properly. repeat if neccesary until notifications go away or just do a test print and disregard the notification if you messed with it already a few times. thats what happened to me and the notification went away on its own. once its online, open the hp utilities and press the "clean the heads" button. do it 2x in a row and you will be back in style, with extremely rich and bold colors and yes, raven black print.
p.s.
you can always take your aggressions out with the tree limb loppers or the tin snips like i did and snip out the center plastic that prevents you from taking the carriage directly out. this eliminates disassembly and re-assembly entirely. just make sure you DO NOT CUT THE TRANSPARENT RIBBON THAT MOVES THE CARRIAGE BACK AND FORTH. this way the next time it happens it only takes you 10 minutes before you are up and printing.
enjoy! - Porf

Does PHD Login Sync Work at All?

Am I expecting too much? But does the login sync even work for anyone? After I setup a user in no instances zero have I got login sync to work as described after an initial sync not even 1 time!!!!!!!
I've got brand new 10.5.8 server/client nothing configured for PHD except mobile preferences for PHD and it never works. Followed multiple guides just not happening.
This would be a great feature for us but as of now I'm giving up and moving on to something else because my experience is not a good one I wouldn't consider using any part of the Mobility prefs as it seems to work NEVER.

PHD setup is a bit ridiculous in that it doesn't quite seem to do what you expect. At least for my district's setup we had to enable both login / logout sync and background sync for login sync to work. Your best bet is to do all you configuration in the com.apple.homesync preference found under Preferences Details tab in WGM, do some exploring in there you get a lot more granular control and discover the settings make a lot more sense.

Private browsing worked fine on the last version, but does not seem to work at all in the new 4 version, so what is the problem? I have uninstalled and reinstalled it several times but that does not solve the problem.

My points above lay out the problem and I get messages telling me it can't find the files....Why is it not working when it did just fine right up until you came out with version 4???
Any suggestions? I may have to go to another browser, but I have always like your product best.

You are welcome. There has never been a need to move that one before, but try it since you can always put it back.
If the same, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - About
Safe Mode - Yosemite

Tecra A7-4032: Does Fingerprint Authentication Software work on all websites?

Hello:
I have a Tecra A7-4032 whit finger print
In some page ,ex hotmail i use a finger for send my user name and password, ALL ok.
But is other page ex . webmail.terra.cl dont work.only type user and password.
All page work whit finger print sotware?
Thanks
Acs

Hi
Im not 100% sure but possibly you have to integrate these pages in to the list.
The other possibility is that the other pages are not authenticated to use the fingerprint authentification software.

Does "Push" just not work at all?

iPhone 3GS 3.1.3.
Our office just moved our e-mail over to Google Gmail. I set up Gmail with IMAP access. Google Sync is NOT set up at this point (I'm an admin for our Google Apps account). I set up an IMAP account in MS Outlook 2003, and it does a great job of keeping everything perfectly in sync on both sides. If I do something in either Outlook or Gmail web interface, the other is nearly instantly updated.
Seems to not be the case on the iPhone. I set up the Gmail account as directed by Google, turned on Push, but I never get anything until I actually open Mail and check the inbox. It's pretty much acting like Push is off and Fetch is set to manual.
Message was edited by: PatrickGSR94

IMAP doesn't provide push functionality to my knowledge. Fetch is set to manual by default - at least in my iPhone4/iOS 4. (Presumably to save juice.) You'd have to enable it manually in settings. Fetch is not as cost effective as push, but hey, this is why BlackBerry has so much business.

Phone does not ring but works in all other ways.

Hi All,
I have a quad set of BT7600 phones, and for some reason these have stopped ringing. This has been like this for a couple of months but I've been away so we have relied on mobiles for this time.
When I say 'stopped ringing' I mean just the noise - the phones show the caller display fine and you can answer the phone and speak to the caller if you see the incoming call - just no ring tone. Outgoing calls and ansaphone messages are also still fine.
I have BT infinity with the filtered socket - I have removed the faceplate and connected my master phone into this with the same result, everything fine except ringtone. I have also tried another cordless phone at the test socket with the same result (Eurotel elite 2825).
Any ideas how I can get this checked out? I'm pretty sure it must be wiring/settings fault outside the house because I've tested with 2 different phones at the master test socket.
Please don't ask me to call the indian no-help-line. I love my BT products, but over the years I've had so many lies and rubbish from them that if they are the only recourse to resolving the problem then I'll move to talk-talk or whoever - even if the service is inferior as long as it doesn't involve BT India.
Thanks,
Alan.

try live chat on this link https://bt.custhelp.com/app/contact#h=eyJzdGVwMCI6ImNvbnRhY3RJdGVtTGluazU2MjciLCJzdGVwSWR4IjoxLCJzdG...
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Does PUSH work for all mail?

Does the PUSH feature work for all mail accounts you create? Or only for Mobile ME users and exchange?

thanks, ill have to check.....i for sure have iMap....we will see about push, although that appears to be a battery hog...so maybe fetch every 15 minutes is best

Does submit button work on all readers or only adobe reader ?

does the submit button work in all pdf readers or only in adobe reader ?
I need to submit FDF.
Thanks

Form fields doesn't work in GSview.

No Label Template is it a bug?

Hi,
In APEX 4.1.1.00.23 I am using Theme 20.
Any page items, if I select Label Template as No Label.
The label is still displayed. Is there any workaround except removing the text in the label Box?
I would rather the No Label Template would work corectly.
Thanks Ron

I found that Sun Fortran does not count blanks from
an 'nX' specifier when writing with advance='NO'. For
example, this code:
write(*,'(A,4X)',advance='NO') '1'
write(*,'(A)') '2'
write(*,'(A,4(" "))',advance='NO') '1'
write(*,'(A)') '2'
end
results in:
12
1 2
I recall some discussion that the standards were a
bit vague on trailing 'nX' with non-advancing I/O.The language in the standard was vague, but the standard
committee recently issued an interpretation that makes it clear.
Unfortunately, it makes it clear that what Sun f95 is doing is
wrong. CR 6580748 has been filed against the bug.
Bob Corbett

HT1937 I can't get do this iCloud, I just do not get it! I looked at so many instructions to try and help me and nothing seems to work. All I want to do is copy and paste all my photo's and videos as I used to before the iphone updated to iOS. Can you hel

I can't do this iCloud thing, I just do not get it! I looked at so many instructions to try and help me and nothing seems to work. All I want to do is copy and paste all my photo's and videos as I used to before the iphone updated to iOS. Can you help me? P
I've tried looking for the devise in My computer but all it says is iCloud. I really want to find the DMIC folder and I don't know how!

Emma Norton wrote:
I've tried looking for the devise in My computer but all it says is iCloud.
You should not see anything labeled iCloud in Windows Explorer.

How does new Label Management feature works in Aruba Central?

Q: How does new Label Management feature works in Aruba Central?
A: Central provides a standard web-based interface that allows you to configure and monitor multiple Aruba Wi-Fi networks.
With as many as devices that central could manage, searching a specific device or set of devices becomes difficult. This is where "Label management" feature of Aruba Central helps out.
With "Label Management", administrator can create various labels in advance and use them to assign it to different IAPs or Switches as required. Once the labels are assigned, user can use the label string to search a device or group of devices in central.
Follow these steps create various set of labels in "Label Management":
Login to Aruba Central and click on "All Groups"
In the left-menu, under "Maintenance" select "Label Management"
Click on "Create Label" button and create as many labels you require as per the environment and ease of use.

for rating . you need to enable rating from List options and choose if it's going to be 5 star or like
to add like button to each page in a publishing site you can use the below script
function LikePage() {
var aContextObject = new SP.ClientContext.get_current();
EnsureScriptFunc('reputation.js', 'Microsoft.Office.Server.ReputationModel.Reputation', function () {
Microsoft.Office.Server.ReputationModel.
Reputation.setLike(aContextObject, _spPageContextInfo.pageListId, _spPageContextInfo.pageItemId;, true);
aContextObject.executeQueryAsync(
function () {
alert('you liked the page'); //here you can update the likes count of the page
}, function (sender, args) {
Hope that helps|Amr Fouad|MCTS,MCPD sharePoint 2010

Does label template copy work at all?

Similar Messages

Maybe you are looking for