Does not get option to Create DS for Hierarchies

Hi Everyone,
I have created Hierarchies and trying to load data using a flat file. I am performing follwoing steps:-
1] Create Hierarchies-Assign Nodes
2] Goto Infosource> Right Click Create Infosource Direct Update for Master Data> Give The name Save it.
3] Goto SOurce System Tree> Click on PC File Source System> Create DataSOurce> Here I get only Three optionsDS for TD, DS for Text and DS for Attr..
In step 2] If I right click Infosource I get only two Options a] Maintain Hierarchies b] Create Transfer Rules.
I am not sure which step am I missing?
I have followed following link
/people/prakash.bagali/blog/2006/02/07/hierarchy-upload-from-flat-files
But in this When I come to Step b] I don't get that optiion of Assign Flat FIle SOurce system to the InfoSOurce.
Can anyone please figure out what mistake I am making?
Thanks

Doesn't help..Still while creating Infopackage , in The second Tab "Hierarchy Selection" I cannot assign the hierarchy.
The only difference I could figure out is while creating Infosource, In "DataSource/Trans. Structure" tab On the right hand side there is another small button " Hier.Structure" is not visible in my Infosource.
I don't know why?
Edited by: A S on Jun 18, 2010 3:55 PM

Similar Messages

RoboHelp9 HTML Trial does not show images in Create PDF for Review

When I do Create PDF for Review, the pdf shows only the gray rectangular placeholders for our logo and another image at the top of each pages instead of the actual pictures. Is this a bug or it is supposed to work like that?
Just in case this has anything to do with it:
Some of RH's PDF Creator Add-in X features did not work on my new Win7, 64-bit, Office2010 machine, and said I couldn't then install my Adobe Standard 7.0 CD because "you have a better product installed". The techs got on my machine for 2 1/2 hrs. and couldn't get it to write pdf via Printed Documentation and were going to try to re-create it in their lab. A week later I uninstalled RH's PDF Creator Add-in X and installed my Standard 7.0 and I can now do Printed Documentation to pdf. Would this have caused the problem in first sentence?

I cannot be sure but I would say it is highly likely. PDF Review is designed to work with Acrobat 9 or X. I know Word 2010 has some issues with Acrobat 9 so if you are using 7, nothing would surprise me.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to ensure for material POs, TDS does not get deducted.

Dear Seniors,
Single vendor is supplying material and doing some service also. How do we ensure that for material POs, TDS does not get deducted.
Regards
KVKR

Hi kkvr,
As i see your requirement is to execute MRRL alongwith the performing a proper TDS deduction and also using single vendor.
There is no Standard SAP solution for this, as a workaround you will have two options for doing the same
Option 1 : Create a different vendor code then you can run mrrl for the vendor code one for service and another for material
The demerits of this solution is duplication of vendor code, which results in not having proper information for the SCM personnel for the purpose of vendor evaluation and vendor reconcilation
Option2:
you need to enahce the Purchase order at line item level with the a custom fields for the WHT tax code to be selected at the time of PO creation. For this you need to do a screen enahcement in PO and also at the time of providing the popup for selection it should only dipslay the wht codes available in the vendor master so that proper control on the tax code selection will happen.
The practical issues here is the po creation person should have the knowledge of the tds code which you need to see whether it is possible or not or you can also suggest that finance controller should be part of po release startegy to check these po's to ensure the correct tds code populated.
Further to this you need to also perform additional enahcement changes for the selected tds codes in the po it should be replaced at the time of mrrl transaction making other tds tax codes base as 0 or removal of tds codes not applicable in the exit.
This exit with the help of the abaper you will be able to find hte standard enhacements available for mrrl and code the same over there so that at the time of posting this will happen.
Further, to this while writing the logic you can also further stream line it as for material po's the tds not to be deducted at all so that user input for the material po's can be avoided and it is required only for service po's this disticntion you can do with the item category.
With this you can perform the enahncement with a minimal changement to achieve your purpose.
Do let me know if you have any quereies,
Regards,
Bharathi

Moving Average Price does not get updated for Project Stock

Hello Experts
We have an Engineer-to-Order implementation for our client. Accordingly procurement is done per project. Each Project issues its PRs which are then converted to POs and recieved into Project Stock.
While assigning the material to the Network activity in Project (using material component) the system uses the price found in the material master (MAP or STD) as a planned cost appended to the project.
Problem:
while procuring the material, when we receive it into Project Stock (Mvt 101 Q + ) the Moving Average Price in the material master does not get updated. this way all newly created material master will never have a moving average price, thus whenever we try to assign them to the project we receive an error message (Cost for Material Component ###Mat.Num### cannot be determined.
Question:
How can I get the system to update moving average price (for all types of stock) based on procurement for project stock.???
Your help is kindly appreciated.

I'm sorry for the confusion
Case:
The T-code is CJ20N Project Builder in PS module
we are assigning material components to network activities under a certain WBS element in the project.
there is a function in the Project Builder to calculate the cost of a network. it uses the costing variant assigned to the network which is PS02 (We get the error here)
The costing variant has a valuation variant which lists a series of strategies to get the material price. Planned 1 if not then STD if not then MAP. (you can choose between many options via a drop down menu) you can choose 5 consequent options.
The MAP that the valuation variant is coded to get is the Plant Stock MAP -- Or the Project Stock MAP but only Per WBS element.
The MAP that the Actual postings update is the Project Stock MAP only Per WBS element.
This means that if you use a material component to purchase material 123 Acc.As. Q for WBS X for 10 $ then you try to assign a new material component with the same material 123 to WBS Y, the system will not get a MAP. because it's stored in QBEW per WBS element.
This way the system will never get the MAP right.
However, we don't always use project stock to procure for projects, for some requirements we can assign and use plant stock as well for Projects. that way we need the MAP from plant stock.
In the Valuation Variant you can use a User Exit Strategy. The user exit's name is COPCP005
My Suggestion is:
Use the User Exit COPCP005 to calculate the { Total value / the total quantity (MAP) from QBEW + Total value / total quantity (MAP) from MBEW } / 2
which is the MAP for both plant and project stock together, since that we are going to use both.
Q: Is this correct !?

JAR file does not get uploaded to client for my SERVLET generated APPLET

Some help please...
I have a servlet that generates the HTML code that contains an APPLET. This APPLET needs a JAR file that is listed under its ARCHIVE property. The SERVLET is in a JAR file that is in the same directory as the other needed JAR file. If I create a static HTML with the output of the SERVLET it works fine. But if go through Weblogic the needed JAR file does not get uploaded to the client so I get a java.lang.NoClassDefFoundError:and my APPLET does not load.
Q1: I am not sure what to put under the CODEBASE tag. I tried "." and I also tried "http://mymachine" but both did not work. I also tried without the CODEBASE tag. No luck. The SERVLET is bound to http://mymachine/servlet.
Q2: Does anyone have any suggestions on how to do this? Is there a way to force the browser to upload a certain JAR file?
Thanks...

It works!!
This is what I did:
The jar file in question was the weblogic.jar. I tried putting it under the lib directory of my war file but I had problems because the weblogic.jar contains other war files inside so when I tried to deploy my war file it also tried to deploy the inner war files which for some reason did not work. So I tried removing the war files from the weblogic.jar and this time I had no problems deploying my war file but I still could not find the classes I needed. So I tried moving the weblogic.jar to the root dir of my war file and it worked!! Now the trick here was: I did not set the CODEBASE AND I had the ARCHIVE paramenter set in TWO places like below:
<APPLET CODE = "marketmap.client.MarketMapApplet"
ARCHIVE = "weblogic.jar"
WIDTH = "657"
HEIGHT = "382"
ALIGN = "BOTTOM"
ALT = "APPLET tag not recognized">
</XMP>
<PARAM NAME = CODE VALUE = "MyApplet" >
<PARAM NAME = "type" VALUE="application/x-java-applet;version=1.2.2">
<PARAM NAME = "scriptable" VALUE="false">
<PARAM NAME = ARCHIVE VALUE="weblogic.jar">
</APPLET>
Actually if you do not place a parameter named ARCHIVE (at the end) it wil NOT work. I tried with multiple jar files listed and it works great too.
Anyway I figure I'd share. Thanks for the help too.
Lastly for people who choose not to upload the jar files to clients, you should look at the bea documentation on applets. It lists a classpath servlet that allows you to provide classes to the clients without having to force them to download the jar file.

SA520W does not get IP on optional WAN

We are using a SA520W as our primary router and have a fiber connection attached to the default WAN interface. We would like to improve our uptime using a secondary internet connection on the optional WAN interface.
We have bought a dovado tiny 4g router for this other connection. It acts as a dhcp server but the Cisco router does not get an IP from the dovado router. The router works as expected when connected to a normal computer. But somehow the cisco router doesnt get an IP.
I have also tried to set a static IP for the Cisco router but that didn't help either. The dovado router is setup do deliver ip in the range 192.168.0.2-254
Link is up but WAN state is Down. Any ideas?

Hello Christian,
What is the port configuration settings, set to 10/100/1000 Half or Full. If Auto try manually changing. Also you can try to clone the mac address, or set the mdi/mdix settings on the G4 router if possible.
Cisco Small Business Support Center
Randy Manthey
CCNA, CCNA - Security

My credit card has been charged for book, however my purchase history shows no record of the transaction and I have not received the book. The online problem reporting system does not have options to report this incident. Who can I cal

My credit card has been charged for book, however my purchase history shows no record of the transaction and I have not received the book. The online problem reporting system does not have options to report this incident. Who can I call?

Would be problems with purchases, billing, and redemption option. It's not 100% exact to your issue, but it will get you to the right department.
Go here https://expresslane.apple.com/GetproductgroupList.do then select ITunes, then Store, then Purchases, Billing, and Redemption. Then.. probably pick "My topic is not listed."

Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess

Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess

1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Note: This is now your Library. It's not a Back Up, and you need another disk for backing up.
Regards
TD

I am part of a family sharing setup. Can I have my own payment method so the organizer does not get charged for my purchases?

I am part of a family sharing setup. Can I have my own payment method so the organizer does not get charged for my purchases? If so, how do I set this up?

Yes. Just redeem gift cards so that your own account always has a sufficient credit balance. Here is how it works:
Family purchases and payments
After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card.

How do I get my photos off 1st generation itouch? I have macbook pro, ipad, iphone. Itouch syncs but does not have option to share in any capacity ie send via email, etc. Also, the computer from which photos were originally taken from has crashed.

How do I get my photos off 1st generation itouch? I have macbook pro, ipad, iphone. Itouch syncs but does not have option to share in any capacity ie send via email, etc. Also, the computer from which photos were originally taken from has crashed.

It has always been very basic to always maintain a backup copy of your computer.
Did you fail to back up your pics?
The photo sync is one way - comptuer to ipod.
You can e-mail them to yourself (instructions in the manual), but they will not be of the original quality.

I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ?

I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ? Right now I have a 10.5.8 is there a way to upgrade or something?

Buy the Snow Leopard retail installer (http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA).
That will take you to 10.6.3.
If required you can then use the combo updater to get to the latest version, 10.6.8 (http://support.apple.com/kb/DL1399)
SL system reqmts;

I upgraded Elements but now it does not recognize Option key for Clone Stamp, Healing Brush etc.

I upgraded Elements but now it does not recognize Option key for Clone Stamp, Healing Brush etc.

Quit the editor, then relaunch it while holding down command+shift+option. Keep holding down the keys till you see a window asking if you want to delete the settings file. You do.
It wouldn't hurt to repair permissions, either.

When I turned on my device the inbox mail was empty, in time machine does not show options to find old back up, only inbox is not listed... how I can get my inbox emails back?

I turned my macbook on and all the emails of inbox were gone. In time machine, only the inbox option does not shows option to get back old back ups... how I can get my inbox emails?

I figured it out. I couldn't see the old backups because the sparsebundle had not been properly unmounted in a previous session, so it kept giving an "already in use" error. The problem was solved by restarting the Time Capsule through the Airport Utility, mounting the sparsebundle by double-clicking it, and then going through the "Browse other backup disks" option in the Time Machine menu bar icon.
The following links were helpful in figuring this out:
http://pondini.org/TM/C12.html
http://pondini.org/TM/17.html

HP-photosmart 6280 all-in-one with osx 10.9 now does not show options for printing photos from the photo tray.

Using osx mavericks on macbook pro. My printer for HP-photosmart 6280 all-in-one now does not show options for printing photos from the photo tray.

What router? Have you restarted the router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

SOLVED - BIOS UPDATE "SYSTEM DOES NOT CONTAIN the NECESSARY WMI SUPPORT for this VERSION of HPQflash

If you get infamous error when updating HP Portables (laptops/notebooks/ netbooks) BIOS within Windows:
"SYSTEM DOES NOT CONTAIN THE NECESSARY WMI SUPPORT FOR THIS VERSION OF HPQFLASH":
I am posting a solution found for own business laptop (HP 8540W & 8760W) so WebSearch engines index/register it in a few days - future sufferers come here and get a SOLUTION, finally. Disreagrd previous "experts" advises, they don't work 100% & pity on TechSupport folks who get HP paychecks yet don't know products their co. designs/manufactures (on deep Technical level):
Below is a SOLUTION (WORKING) !
Go into Services (Run "services.msc" or get there thru ControlPanel-->AdminTools-->), find following 2 services ==> make sure they're running, chances are they're NOT (as in my case I keep them disabled unless need running):
1) "HP Software Framework"
2) "HP Service" [no typo - a real plain name]
If not running, set Properties-->Manual and click "Start", make sure both are running.
Rerun BIOS updater, choose option for "Within Windows" or something to that effect (using HPQ/ROMpaq updater), rather than "create USB BootDisk on Key", this time it should work without the hassle of a BootDisk creation.
Should work from within Windows environment.
Notes:
a) Likely only one (1) service is responsible - namely "HP Software Framework" for HPQ Updater to fail, but doesn't hurt to reenable/restart both services.
I in fact am responding to other customers who elect to Update BIOS within Windows, perhaps oldfashioned but to me Boot Updater is more natural & always works regardless of WMI Support.
b) After done, don't forget:
*) Recheck BIOS settings - update may've added new and/or changed old, so rescan tobe sure.
**) Go BACK into Windows-->Services.msc & redisable both aforementioned Services if were originally disabled; or you're a computer Pro, you know what you're doing & like me keep all HP services disabled. The ones we got on EliteBook 8760W are pests consuming system resources, you just enable "Software Framework" when occasional issues emerge with HP softupdate (typically no issues) & redisable after use, rest of services are bloatware - some attempt to overrun Windows Wireless console, some seekout HP Networked printers (Ethernet, Wireless, but not USB), some do this & that - I study/know which one does what and decided to disable all. This is called a "minimalist" philosophy & turns your machine into a fast beast, I recently sold a very obsolete 4-year laptop which however handles 3DMCAD & complex designs/simulations, better new machines out fo a store, as new machines are loaded w/bloatware chocking down resources.
BUT nobody is requiring you to disable anything though.
The solution merely states the fact:
These 2 (or 1) services when not running halt BIOS Update "within Windows" (you can still run "BootDisk option", however, if preferred).
Simply restartung them solves your problem. Usually
Ya'll have a good day and enjoy!
===========
BELOW ARE IMPORTANT WARNINGS:
1) IF YOUR BIOS UPDATE STILL FAILS, SOME OTHER PIECE IN WMI SUPPORT IS MISSING - IN MY CASE WAS THESE 2 SERVICES, BUT THERE'S REMOTE POSSIBILITY SOMETHING ELSE MIGHT BLOCK UPDATER. DON'T WASTE TIME & CHOOSE "USB/BootDisk" options instead
2) Once BIOS updater does its job, will ask to auto-restart - let it go on & complete, it will self-shutdown (click "Next" to skip 60-second timer), then do NOT turn it on manually!, wait - it'll turn on by itself in 15 seconds, let it boot into Windows, you're done!
3) WARNING: close other apps before proceeding, be 100% sure your ACpower won't be interrupted or better yet - make sure battery is in/charged (so if ACpower accidentally disconnects, you're autoswitched onto battery) b/c power loss may result in severe damage to internal hardware. In the old days it'd result in fatal damage, these days powerloss would still result in a major repair (ROM chip corruption).
So to summarize: those 2 services I specified, are often responsible for whether HPQ/ROMpaq will or won't run.
Other causes possible, but I've not witnessed; and if so - choose BootDisk option.
===
Stan M. Starinski, MSEE.

Hello Ceramics.
Your ProBook is an Enterprise model. It would be a good idea to also post your question to the HP Business Boards as those forums deal specifically with that kind of product. Here is a link.
Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Does not get option to Create DS for Hierarchies

Similar Messages

Maybe you are looking for