Does PerformancePoint require Kerberos to be configured?
Hi, a relatively simple question..
I have a 2010 web app configured and have tried to implement Performance Point. I'm running into a few errors.
I've created a new web app and it still didn't work, so I went ahead and configured Kerberos on the new web app. This seems to make it work OK.
I didn't realise Performance Point required Kerberos? or does it?
Thanks!
PP doesn't specifically require it, but access to back end data sources certainly may. Plus, Kerberos will improve security and performance.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Similar Messages
-
Does WLC require a reboot after configuring SNMPv3
I am going through WLC 7.0.116 configuration guides and it states "reboot the controller so that the SNMP v3 user that you added take effect" as last step of configuring SNMP on WLC.(Even 7.3 config guids say the same)
http://www.cisco.com/en/US/customer/docs/wireless/controller/7.0MR1/configuration/guide/cg_controller_setting.html#wp1117056
I know without rebooting, I can added WLC to WCS using SNMPv3. Not sure what's the importance of a reboot WLC after configuring SNMPv3.
Could someone shed some light on this
Regards
RasikaCSCua09707 Release Notes on 7.0 Trains list SNMPv3 needs reboot - Incorrect
Release notes on controllers for 7.0, 7.2, 7.1 list SNMPv3 needs a reboot. This is not the case in any of the 7.0 versions. -
I want to upload a Banner to my iTunes U page.
The banner file has all the requirements like as, kind, size, frame, and etc.
Infortunately, I could not upload the file. It does not show in Provider Page Configuration or the preview.
Someone could help me?Sounds like a driver issue. I never tested in bridge, so I could be wrong. But it sounds to me that when you are connected to that screen, your settings are not set to the full resolution of that screen.
-
I have relay.skynet.be as my outgoing server and it does not require/allow password protection. When configuring mail on the Ipod the option of "non" is not given for the outgoing server. Is this a skynet issue or is there an Ipod solution?
Google for:
setup XX email on iphone
to see if ony of the returned sites help.
XX is you email provider. -
OK; have been trying to setup a test VM based RDS deployment for a few days now with no luck.
this error mentioned above:
"Server <server name> either does not have a virtual switch configured or none of the configured virtual switches have an IP address assigned" error is driving me nuts!
I have removed and re-added the RD Virtualization Host role numerous times, each time having the "create a virtual switch" checkbox selected, but it did NOT create any virtual switch.
I created the external virtual switch manually and tried to create the desktop collection again, no luck with the same error.
a few questions:
1. you don't assign IP to a switch! you assign IP to Network Interfaces. why does the error puts it like this?! it is technically wrong.(yeah yeah I know all about how you'd assign IP to managed switches in real world to telnet into them and manage them.
you know better than me that it is not the case here!)
2.the RDS Virtualization hosts are using their wifi card as the card for the virtual switch. could that be the reason? I even disabled their unplugged wired NIC just to make sure that the wifi is the only available option for the RDS wizard to use for the
virtual switch creation; but it didn't use it and it didn't create any virtual switch automatically.
3.if WIFI nic is indeed the reason, is it your suspension or an official documents is there somewhere stating so (that the WIFI NICS on a Virtualization hosts are not supported as the hub for a virtual switch).
4.what are the properties of the virtual switch the RDS requires? does it have to be external? why can't it work even with my manually created external switch?
5.how would I fix it?
P.S: the environment is made up of 2 laptops, having windows 2012 R2 trial installed on them, using their wifi to connect to the out world. no cable is plugged into their wired NIC card.Hi,
Thank you for posting in Windows Server Forum.
The simplest short term solution was to connect each computer to a small switch that had no other connectivity. This brought up the link light on the external NIC and allowed the creation of the collection to complete. You need to use an external switch. You
can create one external switch which might fix the problem.
Please check below article for information.
VDI Deployment Error About Virtual Switch
In addition please referthis article for information regarding virtual switch.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support -
Image drag drop not working in scaffholding. Does it require soem setting?
image drag drop not working in scaffholding. Does it require soem setting?
Hello Manoj,
The scaffolding teamplate which you use to create scaffolding page is actually a design prototype which helps you to create similar types of pages instances very quickly without authoring each page separately (for example news, aticle types of pages) and that is the concept of scaffolding only.
For example - When you go to location http://localhost:4502/miscadmin#/etc/scaffolding/geometrixx you will see a "News" page which is an example of scaffolding (this is a similar page which you can create using scaffolding template).
Now if you open this page you will be accessing http://localhost:4502/cf#/etc/scaffolding/geometrixx/news.html and here you will see already design page.
1. if you access page properties from side kick you will see how this page is configured using target template and target path
2. if you go to design mode using side kick you will see how the component has been design (which is similar to what appears on page when you came first time)
3. Now come back to normal view of that page (http://localhost:4502/cf#/etc/scaffolding/geometrixx/news.html) and author this page with some dummy property and click on "create" button. I know here you can not author the image as it comes as disabled empty box.
4. once you author the content and click on create button it will create an instance of scaffolding page on the same page you can see the link on the top of same page.
5. Now access that page, when you access that page the page will take reference of target template you configured using pare preoperties to display the page.
6. On this page you will see the same component you configured and when you will edit it you can author the image from there directly.
Now question is why to configure same component two times half data from scaffolding and half data from page but answer is the design is correct because the page design which you have created (for example http://localhost:4502/cf#/etc/scaffolding/geometrixx/news.html) is just proto type to create actual page instances and prototype can not holds values for page instance (specially image until it doesnt configured correctly for page instance in this case) which exist only when you create pages using the scaffolding page prototype. Otherwise you have to do more customization by extending scaffolding "/libs/wcm/scaffolding" changing the code and design OR you have to design it according to your target page strtucture which you have configured in page properties (specially image node).
If you want to create your own page prototype using scaffolding template and want image to associate just copy paste "/etc/scaffolding/geometrixx/news/jcr:content/dialog/items/items/tab2" node to your newly created scaffolding page prototype.
for more information on scaffolding just refer -http://dev.day.com/docs/en/cq/current/wcm/scaffolding.html
I hope it clarifies your question and help you to proceed. Let me know if you need more information or help.
Thanks,
Pawan -
Does Tiger require ownership (and sharing) of wired printers on a wireless LAN? My G4 (Tiger) and all printers are wired to the LAN, and the G4 can access all printers through the router. Additional wireless Macs (Snow Leopard and Mountain Lion) cannot even find the printers. Yet, if the G4 shares the printers, then ALL computers on the LAN can access them. However, this requires the G4 to remain powered. Is there a workaround that would allow me to shut down the G4 and still use the printers?
Hello BDAqua!
Well, I am halfway there. Following your steps on the Snow Leopard MBP, the newer printer (a Canon MX860 inkjet) appeared automatically under the "default" icon on the ADD printer window. I used the IP icon with the HP Jetdirect-Socket protocol to find and add the older printer, (an HP 4000N). That required running a configuration page from the printer to locate its IP address. I printed to both printers through this laptop with success!
I then followed exactly the same procedure with the Mountain Lion MBP. For both installation attempts, I got an error message window: Unable to verify the printer on your network. "192.168.111" may not exist or is unavailable at this time. Would you still like to create the printer? If I click Continue, it creates the icon and name in the printer list. However when I attempt to print from an app. the next message says, 'Printer is unavailable.'
Why one laptop finds and uses both printers, and the newer laptop does not, just floors me!
Thank you for your ongoing assistance.
Bill -
I have recently upgraded my iBookG4 from Tiger to Leopard 10.5.8 and find my Bluetooth USB adaptor no longer connects. The Bluetooth pane says inactive. Does Leopard require USB 2.0. I've had the adaptor for some time so may be USB 1.0
Bluetooth icon on menu bar shows bluetooth off. When opening bluetooth preferences it shows the devices I've connected previously,( my mobile phone), and other devices I've attempted to connect but not very successfully: my iPhone and MiniMac. The bluetooth dongle in the USB port shows a continual blue light but does not react and the iBook does not recognise that it is there. There is absolutely no reaction when I try to pair my mobile phone, which I've done successfully before upgrading to Leopard, either by the iBook or the mobile phone.
I assumed that Tiger was not bluetooth compatible with the iPhone or MacMini running SnowLeopard and hoped by upgrading to Leopard I could achieve some file transfers between the three devices (iBook, iPhone and MacMini) -
After updating my iphone 4 with the ios 6 update. My iphone would no longer connect to my home wifi that is password protected. I know that I have the right password entered in. At work we have a free wifi connection that does not require a password and I can connect no problem to it. My ipod touch has no problem connecting to my home wifi. It is a 3rd gen ipod and does not have the ios 6 update on it. Please help!
I'm having the same issues. Started when I upgraded iphone 4S and ipad1 to 5.1.1. Wife's iphone 4g on 4.4.2 has been ok. I've forgot the network on both devices and restored the iphone, none of which changed the issue. I've upgraded to ios 6 on the iphone 4s, problem still persists.
One thing that will help for a time: go to your router and change the wireless control channel. When I first did this I got full connectivity for about 48 hours... and now the problem is back. I'm now changing the wireless control channel every 12 hours, which is a pain but at least keeps me connected. I've tried a few other solutions that are out there and that has been the best one so far.
to do this on a motorola router: type 192.168.0.1 in your address bar.
username: admin and password:motorola if you have not changed the factory defaults.
Click on the word "wireless" and look for the "control channel" field. This may be set to auto or to 1, try changing it to 6 or 11 (preferred) or any other channel.
The control channel can cause static in the wireless system IF there are several networks nearby that are on the default setup.
There is a fair bit of buzz about this issue out there, some other things I've seen:
This is a hardware issue. Go to the store and have your wifi antenna checked, some users reporting that they get free replacement devices.
Check against other wifi networks that require a password (this is next for me). Logon to those networks and surf until your wifi stops. If your wifi connects to the internet but stops responding, then this is a software (or hardware) issue and apple needs to step up. Some are claiming this to be the case.
IF you connect and stay connected/on the internet on another password protected wifi, then the issue is with your router. this is where things get cute.
Comcast may tell you to update your firmware. Motorola may tell you that your cable provider is the only one who can push through firmware updates. Comcast may tell you that you are not in an area that is being updated. It's unclear if they say that to all customers, or just those who have purchased cable modems and aren't renting them from comcast.
Good luck, more to come if I figure out anything else, and please post any solutions you may find. -
Is there a mobile phone that can sync with ical, but does not require a data plan?
Is there a mobile phone that can sync with ical, but does not require a data plan?
Thanks for the reply. I already have this info, but have spent several hours trying to cross reference with the product descriptions and the different carriers websites. I was hoping there was an easier way.
John Maisey wrote:
Hi,
You cakn sync many phones using iSync. See here: http://support.apple.com/kb/ht2824
Best wishes
John M -
Where can I get a digital certifcate that does not require a USB key?
Where can I get a digital certificate that I can use with Adobe Acrobat that does not require a USB hardware key?
I have been able to sign PDF documents with Adobe Acrobat versions 6 and 9 with my code signing certificate. When I use my code signing certificate Acrobat says the validity of the document certification is unknown.Per existing standards (RFC 5280) code signing certificates may not be used for signing. For a number of versions Acrobat had a bug that ignored this requirement. Starting with version 11.0.07 Acrobat (and Reader) enforces this requirement.
-
I have a 4s iphone and want to date and time stamp photos taken with the regular camera installed on the phone. Does this require a separate app?
For such to be visible, yes. Many such apps in the app store.
-
IF UPDATES TO APPS THAT CAME WITH OUR MAC ARE FREE, WHY DOES APPLE REQUIRE BILLING INFORMATION TO BE COMPLETED IN THE SCREEN JUST BEFORE ACCESS TO INSTALLING FREE UPDATES???
It is necessary to confirm your identity as the 'buyer'. Please do not use all capital letters. It is not well regarded here and can be tricky to read for some. Thank you.
-
I'm thinking of getting apple tv...I have an HD tv. will the apple tv automatically detect my wifi or does it require more to use apple tv?
Hi ronda
I am not sure what you mean by "automatically". It will find your network but you will need to enter your password, assuming you have your WiFI protected. -
Trivia game that does NOT require data
looking for a trivia game that does not require an Internet connection. We are going camping and like to play a trivia game around the camp fire, but there is no cell service or data or wifi. We have used Mr Trivia for the last couple years but have ran out of new questions. Looking for something simular in function. Most of what I've tryed does not funtion without running data.
ipad, iphone or pod (mutiple generations)
thanksdalewren wrote:
Are there any carriers that allow this?
Not that I'm aware of. In fact, many carriers, if they detect an iPhone on their network without a data plan, will either bill you for such or cancel your service.
Maybe you are looking for
-
2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 DismApi.dll: - DismInitializeInternal 2014-07-30 10:51:44, Info DISM API: PID=2012 TID=2008 DismApi.dll: <----- Sta
-
How to reset already posted GL line item attributes
Hi Experts, I have an issue with GL line items for Bank clearing account. At the time of conversion posted the line items in bank clearing account which are not open items and also not cleared items. Now I want to make it as open items in order to cl
-
Payment Card Information with Material Groups and Work Orders
When processing purchase transactions that were purchased using a payment card, standard functionality in SAP says the system automatically generates a parked document with authorized users allowed to post these documents. When these documents are be
-
Forms Crashing Forms [32 Bit] Version 10.1.2.0.2 On Windows 7
Dear All, Recently we have migrated all our Development PC's to Windows 7, and then after whenever we open any forms which is having more size the system is crashing. Does anybody have any solution for this .Currently we are working with XP MODE and
-
Inside border of table changes to white in opera and ie8?
Does anyone know why Opera and internet explorer change the inside borders of the table to white? In Safari and Firefox it stays black. Here is a link to the website EDIT: I now attached a screen shot of the table of what it looks like in opera.