Dojo toolkit for BSP

Hello,
I am trying to develop a BSP application which will use the Dojo toolkit for some nice controls. Has anyone been through this process and is able to help me out with the necessary steps?
I have downloaded the toolkit, deployed it in the MIME repository but am struggling with the code required to use the controls on the BSP page.
Any help gratefully recevied,
Thanks,
Brendan Byrne

Hi Maulik,
Thanks for your note. I had already read this article about using Dojo with MII and found it interesting.
The question i have is around the deployment of the Dojo files to the repository. I deployed the base dojo.js file but on further reading it looks like I will have to deploy the required dijit, dojo and dojox folders and files depending on which controls I want to use. Is there an easy way to deploy the whole distribution or alternatively easily work out which files I need to deploy?
Any help gratefully received.
Thanks,
Brendan Byrne
Edited by: Brendan M Byrne on Oct 19, 2010 10:16 AM

Similar Messages

How to obtain the table index in word use LabVIEW Report Generation Toolkit for Microsoft Office

I created a word templete and it had several tables. When I use the "Word Edit Cell" function in LabVIEW Report Generation Toolkit for Microsoft Office, the function need "table index", and I didn't find any function to get or set the table index in word document. How can I achieve my attention to write value to specified table cell using the "Word Edit Cell" function?
Thanks for reply!
YangAfreet

Hi yangafreet
You do not need to get the table index for the word edit cell.vi from anywhere. LabVIEW will automatically index all the tables in the document. See the attatched vi for an example.
Rich
Attachments:
Table Edit.vi ‏23 KB

LabVIEW Report Generation Toolkit for Microsoft Office

Hi!
One question. I have bought the LabVIEW Report Generation Toolkit for Microsoft Office
Version 1.0a and am trying to install it under Labview 7.1 but the installation stops with the error: "you need a Labview Version 6.0 runtime engine." Is there any possibility to install the toolkit anyway?
Regards
Stefan

Hi
You can try to update your Version 1.0 to Version 1.0.1. Then it should be working.
Here ist the link for the free update:
http://digital.ni.com/softlib.nsf/websearch/19003CF70BB8A57186256E5A00672E2A?opendocument
if it not works you can try to install the runtime engine 6.0 on your system. her is the link:
http://digital.ni.com/softlib.nsf/websearch/D5F11A64A905DB27862569EC005E31E2?opendocument&node=132070_US
Regards
Manuel

Report Generation toolkit for labview 2010

H All.
I'm looking to download the report generation toolkit for labview 2010. When I proceed to download the toolkit from the national instrumnets website, it says that i need to labview 2011 or later in order to install it.
Is there a version of this report generation toollkit for labview 2010 and can someone provide a link maybe??.
Thanks for reading.
Solved!
Go to Solution.

Try this: [Link removed, NI software downloads can be found on ni.com/downloads, the LabVIEW 2010 Report Generation Toolkit is available to customers with Standard Service Program here: http://joule.ni.com/nidu/cds/view/p/id/3247/lang/en, other customers may contact NI directly]
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

Add Report Generation toolkit for Microsoft Office in exe

Hi
I am having a problem. I am using LabVIEW 8.20, Report Generation Toolkit for Microsoft Office 1.1.2 and Microsoft Excel 2003. My OS is Windows XP (SP )
I want to build the vi attached below into an exe. The vis that I used are from addons>>_office>>excel.llb. I follow the suggestion found in the link below and add in all the files in excel.llb into my project so that it can be added into the executable as dynamic vis. However, some vis in excel.llb cannot be added into my project. After I have add all vis that can be added into the project, I build an application (exe) with the vi below as the Main vi and all other added vis (from excel.llb) as dynamic vis. After that, I build and run this exe on the same PC. I am unable to run it.
This vi will save datas when I click on the stop button. After I click on the stop button, a window will pop-up and prompt me to select which directory to save the vi. When I run the exe, I type in test.xls (for example) but the file saved is a picture and not an excel file. If I just run the vi instead of the exe, Excel will open and datas and graph will be displayed in Excel.
May I know where did I done wrong??
How do I use the Report Generation Toolkit in an executable with Microsoft Excel?
http://digital.ni.com/public.nsf/websearch/C38CE3F30542D65B86256F0E00740DD8?OpenDocument
Thank you & Regards
Lee
Attachments:
Self-Regulating.vi ‏132 KB
Untitled Project 1.zip ‏3841 KB

Hi centerbolt,
Thank you for your reply. I have tried adding in just that dynamic vi found in Excel Library and my main vi but it still cannot work. Is there anything that I need to look out as well?? [View attached picture.]
Thank you & Regards
Lee
Attachments:
added.JPG ‏92 KB

How can I distribute an application using Reprot generation Toolkit for MS Office for different versions of MS Office?

I want to create an application which uses the Report Generation Toolkit for Microsoft Office. The office version of the target machine depends on what my customer has installed.
From several discussions I have seen that the installer detects which version I have on my development machine. I'm not able to hold three or four machines with different versions (97,2000,2002,XP).
I decided to do the following software architecture:
I create a LLB MakeReport.llb with a VI called MakeReport.vi. With VI server I will start MakeReport.vi in MakeReport.llb. Over a named queue I will send a command from my application to MakeReport.vi. Then the report will be
printed.
I will create this LLB by saving MakeReport.vi with File>>Save with options...>>Application distribution. All neccessary VIs will be in the LLB.
I will hold different directories for each version. I can create different version of the LLB. During installation of my application the LLB for the right version will be copied from the CD to the application folder.
I know I will be restricted in testing my report in only one version and hoping it will be good in the other versions.
I think that the difference lays only in the word and excel related llbs.
1. Will my software architecture work or is it obviously wrong?
2. How will I get all versions from the toolkit CD?
3. Which is the registry key I must read to get the right version (a minor question, if somebody knows I do not need to search for myself).
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Lookout saves the files in .csv form which can be opened in Excel. I did make some progress by using the "append table to report" vi which allowed me to put values into an array and then those values were entered into my template on my report vi.
Where I am stuck now is I want to be able to put values into my template from a .csv file, not from an array I have to manually put numbers in.
Once those values are in my template I want to pull summed values from the template and place them into a final excel file for printing.
I have attached examples of the files I am working with to help you better understand what I am trying to do.
I hope that makes sense.
Jason Phillips
Attachments:
HourlyTotalsTemplate.xls ‏120 KB
eb_rain_gauge_ss.csv ‏23 KB
EastBankHourlyRainReport.xls ‏28 KB

LV Report Generation Toolkit for Microsoft Office says "This VI or item belongs to a library that is expired or invalidly licensed"

I have downloaded the LV Report Generation Toolkit for Microsoft Office for evaluation with LabVIEW 2010. The examples for the Help get many errors, including "The subVI is not executable. You must fix all errors in the subVI before this VI can run." and "This VI or item belongs to a library that is expired or invalidly licensed".
I selected that I wanted to evaluate the toolkit instead of putting an activation code during installation. Installation went OK.
How can I get the examples in this LV Toolkit to Run so that I can evaluate it?
Solved!
Go to Solution.

Also when I place the MS Office Report function in my block diagram, I get: "Unable to View Properties" popup message and no Contextual Help on the function.
How can I get these RGT function to work properly so that I can evaluate the toolkit?

How do I put data into a template using the Labview report generation toolkit for Microsoft Office?

I am running Lookout 5.0 and have recently purchased the Labview Report Generation Toolkit for Microsoft Office to create reports from my Lookout logged data. Since I have never used Labview I am having my problems. I tried following the tutorials but they do not seem to be examples of what I want to do.
I log rainfall totals (1 spreadsheet)in Lookout from 40 different sites in 5 minute increments. I copy these totals and paste them into another spreadsheet which sums them up to give me hourly totals and then paste those totals into a spreadsheet for distribution.
In Labview I create a new report and use the distribution sheet as my template, but how do I complete
the steps of loading the raw 5 minute data into labview and then paste it into the hourly total spreadsheet and then transfer those totals into the distribution template?
I have been trying to figure this out for over a week, and I am getting nowhere.
Any response would be appreciated.
Thanks
Jason P
Jason Phillips

Lookout saves the files in .csv form which can be opened in Excel. I did make some progress by using the "append table to report" vi which allowed me to put values into an array and then those values were entered into my template on my report vi.
Where I am stuck now is I want to be able to put values into my template from a .csv file, not from an array I have to manually put numbers in.
Once those values are in my template I want to pull summed values from the template and place them into a final excel file for printing.
I have attached examples of the files I am working with to help you better understand what I am trying to do.
I hope that makes sense.
Jason Phillips
Attachments:
HourlyTotalsTemplate.xls ‏120 KB
eb_rain_gauge_ss.csv ‏23 KB
EastBankHourlyRainReport.xls ‏28 KB

Control checkbox form field in word with report generation toolkit for Microsoft office

Hi all,
Happy New Year!
I insert in the word template the check box form field. It has a bookmark name "Check1".
Now I'm trying to checked or unchecked this field using the report generation toolkit for Microsoft office and I couldn't. If anyone now how to do it? I'm using LabView 8.0
Thanks in advance,
Boris
Solved!
Go to Solution.

Boris,
The Microsoft Office Toolkit does not have support for checking/unchecking check box forum field. You would have to research the activex functionality that enables this to be checked or unchecked and then do the activex calls yourself. I did hear of one csutomer who used a special font to write a blank box or a checkbox into a word document and changed it that way as well.
Maybe http://www.ozgrid.com/forum/showthread.php?t=53715 gives a hint to an activex reference
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video

National Instruments releases LabVIEW Report Generation Toolkit for Microsoft Office.

The new LabVIEW Report Generation Toolkit for Microsoft Office is a library of flexible, easy-to-use tools for programmatically creating and editing Microsoft Word and Excel reports from LabVIEW. Whether you need to generate reports summarizing manufacturing test results or compile process statistics to improve your production yields, this toolkit speeds your development of customized, professional reports.
To see examples of this toolkit or get more information please visit :
http://www.ni.com/labview/report_gen_toolkit.htm

It is a bit limiting though. I built my own set of VI's, a toolkit if you will, that does some of what this tookit does. But, I also wrote some functionality that isn't available in NI's kit, such as creating charts as separate worksheets and linking the charts to data on another worksheet. All in all, the toolkit is great, but you can't get as much out of it as you can using the ActiveX calls yourself.

Font Issue with Report Generation Toolkit for Microsoft Office

I have been using this toolkit for only a few days now, but I just have to get this issue off my back. When developing a toolkit it would be a good idea to use the same cluster to represent fonts in ALL places. If you look at "Excel Set Graph Font" vs. "Excel Easy Table" they take two completely different clusters. Why? I don't know, but it is *very* annoying.
How could something like this slip through the cracks? Is there some reason why there is this discrepancy? From my perspective as a software engineer I see no excuse, but maybe someone else can justify this oversight for me. I just hope that I don't find any more issues with the toolkit...
Naveen.

Naveen,
what you said is true when dealing with same kind of objects, but in this circumstance, different cluster defines the font of a differnt object. For example, you may not want the user have as many options with defining the font for the X Y axis title as that for defining the text in the table. This is ture when you want your generated report to have similiar styles.
But this is certainly something we will think about, thanks for your constructive suggestion,
XD Gao
Application Engineer
National Instruments

Is there a way to use multiple canvas tags with the ToolKit for CreateJS for Flash in one HTML5 doc?

Hey everyone, I was wondering if someone could help point me in the right direction for solving this. I have created 5 short animations using Flash and when I published each ".fla " (with Toolkit for CreateJS extension) I get 5 different html5 files with their own respective javascripts. Is there a way to get all those canvas tags in one html5 file and still have it work. I'd love a hint on where to begin so I can begin researching the solution.
Thanks!
-DJ

Why do you think that one will be over written?
You can sync as many ipods/iphones/ipads as you like to one computer. Each is different and will only sync what you select.

New features for BSP since release 7.0

Hi all!
Could anyone just tell me what exactly are the new features since the 7.0 release for BSP-Programming (if any exist) or tell me where to get that information (am a little confused again searching through the SAP-Site-Universe).
Thanks in advance and regards
Jan

Hi Jan,
there aren't any new features for BSP in 7.0, as there is no further devolpment for the BSP framework.
Regards,
Rainer

Third-Party Licensing and Activation Toolkit for Labview 8.5

There is any Third-Party Licensing and Activation Toolkit for Labview 8.5 as LV2010. PLS help..
Solved!
Go to Solution.

I know what you are asking and in the other thread, you were told it was for 2010 only. There is some support for 2009 but not for your old version. Go with the dongle suggested or upgrade your version of LabVIEW.

"Toolkit for CreateJS" Missing from Flash CC Menu

I'm a Creative Cloud user running the latest version of Flash Professional CC on my 27" iMac running OSX Mavericks. I want to export an animation file using CreateJS. However, the "Toolkit for CreateJS" option is missing from my "Window" drop down menu - it's not even grayed out, it's just not there. Using the alternate of Shift+F9 doesn't work either. I tried downloading the CreateJS extension from Adobe but is says I need to be running CS6 for it to work, and that "Toolkit for CreateJS" is supposed to come pre-installed in Flash CS Pro. But it's not there. This is very frustrating, and I'd be deeply grateful for any help someone could give me. Thanks!

HTML5 publishing with the new update is now more inetgarted with the application and we now have a new document type called "HTML Canvas" which publishes using the same CreateJS libraries.
The Toolkit for CreateJS panel is no longer present with the new update, but the HTML5 publishing using the toolkit is now intgerated as part of the HTML canvas document type that you will see new in this update.
Please refer to:
http://helpx.adobe.com/flash/using/whats-new.html#Creating%20and%20pub lishing%20HTML5%20Canvas%20content
Also you can convert your previously created AS3 document that publish to HTML5 into HTML5 Canvas documents. This is also mentioned in the documentation below:
http://helpx.adobe.com/flash/using/creating-publishing-html5-canvas-do cument.html
-Sujai

Dojo toolkit for BSP

Similar Messages

Maybe you are looking for