Dolby and DTS HD form

Has anyone heard of new hardware coming out that will decode or pass along the new 7. HD audio formats from both Dolby and DTS?

Please visit the link I provided. It will answer most of your questions about Dolby-E.
(basically it is an editing and distribution format within the broadcast network, the home user never gets Dolby-E. It is re-encoded to Dolby Digital at time of broadcast.
In the originating production studio (yours, if you have the bucks for the hardware encoder) the 5.1 audio files are encoded straight to Dolby-E, (not AC3 Dolby Digital). This produces a frame based 5.1 encoded file suitable for editing.)
http://www.dolby.com/professional/proaudio_engineering/solutionsdolbye.html

Similar Messages

Can't get Dolby and DTS options to work

Hi!
Could anyone help me with my new Sound Blaster Z soundcard. I can't get Dolby and DTS options to work with my optical cabel under Cinematic tab in Pro Studio. I've googled enough, tried basically everything. Cinematic tab was never greyed out from the beginning. It either gave me intense, very high pitch noice when you acticated Dolby or DTS options or now... giving error which states:
"The SPDIF-out (Sound Blaster Z) device is currently being used by another application. Please close any application that may be playing audio to this device and try again."
I've re-installed drivers numerous times, tried different Windows operating system (7 and 8.1). Speakers (Sound Blaster Z) is made as default device, other stuff is disabled. I seriously don't know what to do, I'm god **** frustrated, because apart from Cinematic tab not working the sound isn't that great compared to my integrated motherboard soundchip.
// If it matters my speakers are Edifier S530D

Hi Kimbie,
Are you able to play back mp3 audio tracks?
I'm suspecting you are trying to play back encoded content.
Do share more details here so that I can assist you further.
Cheers,
Colin-CL

Sound Blaster Fatal1ty Chapionship and Z-5500 With Dolby And DTS Pack.

. I cant get the encoder to work on the program all I get is format is not supported. Im using a optical cable and Its driving me insane. Any help would be great. As you can tell what I have going on here on the screen shot but hell... I cant get dolby or DTS to work keeps giving me that message. <img border="0" width="799" src="http://i9.photobucket.com/albums/a90/bravounit9/Untitled-.jpg" height="653" align="bottom">@75.8.77.249

J. Ok so I got it all working..... But if it can only be played at 48khz I thaugh 92khz is better. Cause I notice when I went from prologic 2 to just optical Digital I dont see that number on my uppper right pud it doesnt say on there 96khz anymore.... :\ So what is 48khz suppose to be better? By the way thanks for all the help also. You guys been helpful.. Just like to know more. Im new to this whole dolby digital. My first speakers that are Dolby Digital. Never hade Dolby Digital speakers [email protected]

X-fi Console launcher - DD and DTS icons g

Hi,
I've got X-fi xtreme music card and recently i noticed that these icons have gone from the lower left corner of the applicaiton.
I tried to play some DTS/DD content from the PS3 but the decoding did not work.
Is it the same for you guys? I have not tested on some other the optical cable yet but that change is the only thing i can think of that could also be the source of the problem.
Thanks for any pointers.

SoNic2367 wrote:
strong_bah wrote:
bump
So you waited a whooping 4 hours and you already bump the post. That's not cool.Anyway, if in this time you would have read the features of your product you would found this:The Sound Blaster X-Fi sound card deli'vers THX? certified surround sound and includes Cyberlink [color="#ff3300">PowerDVD software with DTS? and Dolby Digital?-EX decoding via [color="#ff3300">free download for an unbeatable DVD movie watching experience. The help file is generic for all the cards and some of them are supporting DD and DTS decoding in drivers.
Message Edited by SoNic2367 on 02-27-200709:53 PM
When I checked back my post was already at the bottom of the page, and some people may not look that far, so I bumped it to keep it towards the top, that ok with you?
What makes you think I didn't read the features associated with the card? I even stated that in my original post. My question was about the fact that the help file contained those options in it, and even the images on the box for the card had those options showing, and yet I didn't have them. I did not know that the help file was generic to every X-fi card out there.
So thanks for responding even though you tried to take a few shots along the way.

DDL and DTS activation

Hello. I bought sound card Creative XtremeGamer Fatalty Pro some days ago. Now I decide to activate DDL and DTS support but I don't know where is my activation code. It's missing in instalation CDs and package of card. On this package there is only S/N and thats all. Where should I find it's And my second qestion is what are requirements? for full using of DDL and DTS codecs in hardware? Should I have any special hardware or only my soundcard is enough and is neccesery to make different hardware connection to my speakers(I have analog connection)?
Thanks for your advises.
Marek

You have to buy the Dolby Digital Li've and DTS Connect pack in order to get an Activation Key. Cost $4.72.
Dolby Digital Li've and DTS Connect pack
[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?frompage=category&page=product_detail&fromc ategory=Software&category=Software&pid=F2222DDN6Z2 H2ADDEZD">Click Here![/url]
Message Edited by freesky on 03-27-2009 04:33 PM

Ac3 and dts file import?

Can Soundtrack import these files?
I've been given two NTSC (23.98 fps) audio files (one is 5.1 Dolby Digital EX .ac3 and the other is 6.1 DTS-ES .dts) that I need to use in a PAL 25fps DVD Studio Pro project.
Any suggestions as to how to change the frame rate to match my PAL encodes?
I originally posted this question in the DVD Studio Pro forum but now feel it's better suited here (my apologies).

Max has got you covered. However, I would try to avoid using JPEG files as they tend to end up looking pretty low quality when encoded to MPEG2 (as they wil be when you build the disc). If you can create .tiff files instead, or even .pict then you be better off.
The process of creating a menu is not hard, but can seem intricate for a first time user. I would suggest, as Max does, that you add a standard menu and use the templates provided for now. Delete all but two of the buttons and label the two remaining as 'AC3' and 'DTS'. You could add your image to the background of the menu, if you like, however two different image files would come in handy...
If you add a .pict file to a track then it will appear as a still image. Set your audio for the track as one of the file types. Now in your menu point the relevant button to that track.
Create a second track and add a different .pict file for the visual - maybe a picture which tels the viewer which kind of audio they are listening to - and add the other audio file to that track. In your menu point the other button to this second track.
There are other ways to do this, such as using two audio streams in a single track and using the menu buttons to switch between them, however the above method should get you closer to what you want without getting too technical.
Welcome to the discussions!

XFI Titanium champion.Dolby live dts windows 7 64 hang/fix

:Hi,i have an xfi titanium fatility champion card installed on my pc.My os is windows 7 64bit.Now i no this problem has been about for awhile,but can please someone supply me with the fix that stops the pc from hanging at shutdown and restart when dolby li've or dts is enabled,thanks Adyj7

>Thanks for the answerThis is where it gets tricky.when i try a new install of windows and use the installation cd that i received with my card i find this enables me to use dolby li've and dts with no problems,but the auto update causes me several problems-when i try and update and install drivers and applications--st one is file layout bin--which i have followed the correct instructions for from creative--2nd...is setup.skn from cd----which i have also tried to sort out.After this the cd tells me to contact creative support? because i receive an error 00. I have even tried a fresh install of windows and then downloaded all the latest software from the creative site,installed everything with no problem,buut i find i can only use dolby li've and dts for a short while before it tells me to reinstall the application again!!!which i have tried several times!!!The only way i can get? dolby li've and dts to work correctly is by installling from the cd.Can anyone please advise me on what to do next,Thankyou and kind regards Adyj7

X-Fi XtremeGamer Fatal1ty Pro Series - hardware DD and DTS decod

Do I understand correct that hardware Dolby Digital and DTS decoding?is blocked in drivers for this card??Bundled PowerDVD 6.0 doesn't support Dolby Digital EX, DTS-ES and also Dolby Pro Logic IIx, DTS NEO:6... Sincerely yours,Pavel

Actually, support is in the Creative Audio Console (which is part of the driver suite for all Creative sound cards), and is especially true for Windows Vista, as it has been since Windows 2000 Professional. Part of the problem with Windows Vista is that direct hardware access (even for audio) is headed off at the pass, and thus driver support (and application support) needs to be rewritten to realize that. PowerDVD is expecting an interface (that is no longer there).

Use your X-fi remote controller and DTS/DD popup logo on Win7/Vista.

Hello,
Repost as the previous topic has dissapear during forum migration.
Here the solution to :
Make your x-fi remote controler works on Windows 7 (with full OSD).
Restore the OSD popup when you use the internal decoder of your X-fi.
You can use the creative Entertainment Center on windows 7 (no dvd support).
Every time a dolby or DTS soundtrack is play on the x-fi internal decoder, you will see the logo of the audio technology use (DD, DTS, DD-EX, DTS neo, DTS EX etc.., the logo fade after 3-4 seconds).
You will need to dl and install the Creative Entertainment Center 5.10.16.
Download link : http://www.wupload.com/file/26492424...er_5_10_16.zip
You can install this application with every X-fi that have the remote and/or have hardware decoder, be sure to have directx9 before install.
Note :
For Windows xp use the x-fi installation CD for windows xp to install creative Entertainment Center (which support dvd).
Windows vista already have a creative enternaiment center version on the vista installation cd but this version doesn't support the decoder OSD.
List of x-fi that support hardware Doldy dts decoding : http://www.creative.com/soundblaster/X-FiList/

A standard WAV header has this data structure:<blockquote dir="ltr">[color="#0000ff" size="2">char cRIFF[4]; [color="#008000" size="2">//"RIFF" 4Bytes
[color="#0000ff" size="2">int TotalLenPack; [color="#008000" size="2">//4Bytes
[color="#0000ff" size="2">char cWAVE[4]; [color="#008000" size="2">//"WAVE" 4Bytes
[color="#0000ff" size="2">char cFMT[4]; [color="#008000" size="2">//"fmt " 4Bytes
[color="#0000ff" size="2">int LenFmtChnk; [color="#008000" size="2">//0x000H 4Bytes
[color="#0000ff" size="2">short FormatTag; [color="#008000" size="2">//[color="#008000" size="2">0x0H 2Bytes
[color="#0000ff" size="2">short ChNum; [color="#008000" size="2">// 2Bytes
[color="#0000ff" size="2">int SampleRate; [color="#008000" size="2">// 4Bytes
[color="#0000ff" size="2">int BytePerSec; [color="#008000" size="2">// 4Bytes
[color="#0000ff" size="2">short BytesPerSample; [color="#008000" size="2">// 2Bytes
[color="#0000ff" size="2">short bitsPerSample; [color="#008000" size="2">//2Bytes
[color="#0000ff" size="2">char cData[4]; [color="#008000" size="2">// "data" 4Bytes
[color="#0000ff" size="2">int LenOfData; [color="#008000">// 4Bytes
[/quote]With an Hex editor go to an offset of 0x5H from origin and change that byte from 0 to 92. Here's a screencap of the position you have to modify:?http://img55.imageshack.us/img55/7768/hexwt4.png??

No Dolby, no DTS from my Audigy2 zs plati

I have the same behavior as described under the No Dolby, no DTS from my SBli've 24bit external. How do I get SPDIF DD & DTS out of the Audigy? All I get over the TosLink, is PCM. If I enable "SPDIF" pass through, it works, but then, no sound from my speakers.
No receiver!! All exernal devices (BluRay, ATSC tuner, etc) use the Audigy for SPDIF decoding (in). The analog output goes to an 8 channel DI box for unbalanced to balanced conversion (XLR, +4dBu, ground lift) which goes to my sound system electronics.
The SPDIF out goes to a Creative DDTS-00 for headphones and other audio monitoring.

I have the same behavior as described under the No Dolby, no DTS from my SBli've 24bit external. How do I get SPDIF DD & DTS out of the Audigy? All I get over the TosLink, is PCM. If I enable "SPDIF" pass through, it works, but then, no sound from my speakers.
No receiver!! All exernal devices (BluRay, ATSC tuner, etc) use the Audigy for SPDIF decoding (in). The analog output goes to an 8 channel DI box for unbalanced to balanced conversion (XLR, +4dBu, ground lift) which goes to my sound system electronics.
The SPDIF out goes to a Creative DDTS-00 for headphones and other audio monitoring.

How do I synchronize a table of employees with and employee update form?

WHAT i AM TRYING TO DO:
Create a page with two areas. The top will contain a sortable, filterable list of employees. The bottom of the page will contain all of the details on a selected employee.
WHAT I HAVE DONE:
1. Created a DEPT_EMPLOYEES view with just some basic department and employee information.
2. Created Entities and View Objects based on the DEPT_EMPLOYEES view and the EMPLOYEES table.
3. Created a View Link between the DeptEmpROView (source) and EmployeesUView (destination)
3. Created a page with a panel splitter an dropped the DeptEmpROView in the top as and ADF Table.
4. Dropped the EmployeeUView on the bottom part of the pages as and ADF Form.
WHAT HAPPENS.
1. When I open the page the list of employees is displayed on top, and the first employee is displayed below.
2. When I click on another row in the table the form below does not change. I had expected it to.
3. If I right-click on a row in the table and select "reload" from the options the page is re-drawn and the bottom form is populated with the data that matches the row I clicked on.
WHAT I WANTED
When you click on an entry, to have the bottom part of the page refreshed to match the selected entry.
QUESTIONS:
1. I thought I had followed all of the steps to prepare a master-detail setup. Do this not work with a table as the master? Or did I miss a step? Or am I using components in a way they were not intended?
2. When I look at the ViewLink I see in the Destination that the where clause :Bind_EmployeeId = EMPLOYEE_ID will be appended to the query. I would then guess that :Bind_EmployeeId is not set when I click on a row. Is there a way to make that happen?
3. I notice in the af:table documentation there is an org.apache.myfaces.trinidad.event.SelectionEvent defined. Can I somehow intercept this and set the bind variable then? If so, how to I tell the form to refresh?
5. Another clue. When I run the page I get some warnings. One is "Reference selectedRow not found" . Double clicking on that gets me to a line selectedRowKeys="#{bindings.DeptEmployeesROView2.collectionModel.selectedRow}"
6. Another warning message "Reference makeCurrent not found" gets me to selectionListener="#{bindings.DeptEmployeesROView2.collectionModel.makeCurrent}"
It sure seems like these last two must have something to do with it.
Any clues would be appreciated.
Edited by: rrp on Jan 3, 2011 12:47 PM

Shay,
Thanks for pointing me to that tutorial. The synchronization is now working.
For anyone else that might find this discussion:
To make it work I selected the af:paneFormLayout that held the EmployeeUView.
In the properties there is a PartialTriggers property in the Behavior section.
I highlighted this property and selected the Edit option.
This allowed me to navigate the component tree and pick the table holding the DeptEmpROView.
That was it. Now clicking on the table changes the details displayed in the form.
There are questions, but they are more followon:
1. The tutorial surrounded the "list table" with a panelCollection. I did not do that. I don't know why or why not to use the panelCollection.
2. The tutorial made a point of setting the ColumnSelection attribute to single for the List table. I did not find this changed the behavior in any way and was wondering why.
3. The tutorial also made a point of changing the ContextMenuSelect for the list table to "clickToEdit".
3a. I did not see how this changed the behavior
3b. Why "clickToEdit" on a read-only table?

Safari and mail will not load but i am connected to internet and can download form itunes and other sourses is that HD failure?

Safari and mail will not load but i am connected to internet and can download form itunes and other sourses is that HD failure? any suggestions ? verify disk says its OK

iOS 4: Updating your device to iOS 5 or later - Support - Apple
iOS: Unable to update or restore - Support - Apple
iTunes for Windows: iTunes Store connection troubleshooting
See if any of these three may help.

Should I erase and replace my former internal hard drive?

Recently my computer started booting slowly, or just hanging during regular activities. If I shut it down, I couldn't always get it to boot up again. When I could boot to my Recovery HD, I ran Disk Utility and repaired both permission and disk errors, but I still had issues with the machine starting up. At a Genius Bar appointment, I was pretty much told point blank that my hard drive had failed, and as it was a non-Apple HD (I'd upgraded to a 750GB Seagate Momentus purchased from Other World Computing), I would have to talk to the reseller and/or manufacturer.
I put the original Apple HD back in and still had issues booting up, but another GB appointment found other errors during a Disk Utility sweep (vs. a logo board error). The Genius seemed to recommend Erase and Installing Lion again, even though after the sweep, everything seemed to boot up fine: it got past the Apple logo/spinning wheel, and it booted onto my desktop without hanging as it had done before.
I have everything current on a different Time Machine drive. The Momentus is now in an external enclosure, and seems to boot fine, but I already submitted a warranty request to Seagate and intend to send it back for a replacement--if I can manage to erase everything on it, first. The original Apple HD doesn't have nearly enough space for me, but I'm making do by trying to get it up-to-date OS wise and with my other software.
My questions are as follows:
Is there a way to verify the "failure" that the first Genius saw on my Momentus drive? Perhaps I can just erase and re-install Lion on that, and get my backup from my Time Machine. It's my understanding that I can't actually boot from a Time Machine backup; I can only restore from it during initial setup, similar to an iCloud backup for an iOS device.
Should I Erase and Install my former Apple HD and try and restore my Time Machine onto that? I wasn't using nearly all of the 750 GB, just about 450. But the original HD was only 500 GB...
If I do end up sending the Momentus back and replacing it with a new one from Seagate, is Erase and Install via Disk Utility to the best way to remove my data from it?
Thanks for your time and assistance!

If you have a time machine back up of your current drive you can do this
Shut down your computer, install the new drive. While the computer is off plug in the external hard drive that you have your time machine back up on. Hold Option key while the computer turnes on, let go of the option key once you get a grey screen. Shortly after you'll see a list of bootable drives, select the one that has your time machine back up on it and boot into that drive.
From there go into disk utility, format your new drive too, osx extended journaled ( I think, double check that, its been awhile since ive had to do this), hit format
Exit disk utility and then you can use time machine to copy all your exisit data to the new hhd and then your pretty much done.
There is also a program called Carbon Cloner that will do esentially the same thing however I've never uesed it.

I have purchased Adobe XI Pro and created a form for entering bowling scores to submit to newspaper for my high school team. I can not figure out how to get pdf's into my documents folder on my iPad so that I can access the files in bowling alleys where

I have purchased Adobe XI Pro and created a form for entering bowling scores to submit to newspaper for my high school team. I can not figure out how to get pdf's into my documents folder on my iPad so that I can access the files in bowling alleys where I do not have a Wi-Fi connections. I need to be able access files without going to acrobat.com. Help!!!@

Post the PDF files to a web site. The browse to them in Safari on the iPad. When you Open the files specify the Open to occur in Adobe Reader. Then you can have/Save them in your Documents folder on the iPad. An iPad has limited access to files otherwise.

How to insert the style in sap-script? and in smart form?

how to insert the style in sap-script? and in smart form?

Hi..,
For SAP scripts u need to create them in SE72 ...
and u can include them in the script editor as..
/: STYLE <STYLE-NAME>
P1 text............... (*** P1 is the Paragraph format created in SE72 )
/: STYLE *
For smartforms u need to go for the transaction (tcode) SMARTSTYLES... here u can create paragraph and character formats globally...
<b>Sunil, plz do remember to close all your threads, when ur problem is solved !!</b>
reward all helpful answers,
sai ramesh

Dolby and DTS HD form

Similar Messages

Maybe you are looking for