Dolby digital via Toslink

Hardware
Mac mini (mid 2011)
Yamaha YAS-101
I've connected a mini to a Yamaha YAS-101 via Toslink hoping to receive Dolby Digital 5.1. The problem is that the YAS-101 detects the signal as stereo. I was under the impression that it shouldn't be a problem to achieve this via Toslink? Tested with Itunes and VLC.
The YAS-101 detects DD when playing a bluray from a PS3 so shouldn't be a problem there.
Thankful for any help.

If your Mac Mini has a HDMI port, it's one of the few Apple products that does audio (5.1) and video through the HDMI port.

Similar Messages

  • How to set the AppleTV to output PCM DIGITAL via toslink

    how do you set the AppleTV to output PCM DIGITAL via toslink - my amp can only recieve PCM audio via toslink cable

    I am having the same problem. I bought an optical-analog convertor from Amazon (SANOXY) and had Onkyo try to help me set it up. No luck. I am going to try a Monoprice version. I was able to output audio through my DirectTV box to the Zone 2 speakers, so that isn't the problem. I was able to hear the music from my iMac through the AppleTV/Onkyo receiver on the 5.1 side but was unable to output it through Zone 2 to the speakers.
    Very frustrating!!!!

  • 5.1 Dolby Digital via optical cable in Mac Pro?

    Hello!
    I'm planning to get a new Mac Pro and I wanted to know if a Dolby Digital or DTS encoder is included to have 5.1 output with the optical TosLink cables.
    I need this to connect the Mac with my 5.1 surround sound system because I wanted to watch DVDs using it.
    If it only supports stereo sound in the standard version, do you have any recommendations to expand it to get the described feature?
    Thanks for answers.

    Hook up the toslink, set the output to digital in System Preferences>Sound, set the input on your 5.1 receiver and match the surround sound format in both the DVD movie sound prefs and the receiver.
    That's it.
    Remember to set the speakers in the correct positions from your sitting point or it won't work very well.
    To test the surround sound I suggest the movie Castaway, where Tom Hanks is picking up Fedex boxes from the surf line. You'll hear the waves crash on the left, Tom walking towards you and coconuts falling on the right.
    The toslink and a good receiver also makes your rips and iTMS songs sound great too.
    Check out the Volume Logic iTunes plug-in as well, really makes the music sound great.
    (no comp)

  • Decoding Dolby Digital via Optical

    Can anyone tell me if it is possible to decode the digital signal from my satellite receiver via the optical in port on my Audigy Platinum? I hooked it up and all I got was basic surround, and yes, I was watching a movie on the receiver that was being broadcast in dolby digital.
    Thanks for the info...

    TranceDance77 wrote:
    Can anyone tell me if it is possible to decode the digital signal from my satellite receiver via the optical in port on my Audigy Platinum? I hooked it up and all I got was basic surround, and yes, I was watching a movie on the receiver that was being broadcast in dolby digital. Thanks for the info...
    What do you mean "Basic Surround"?
    As far as I know, it is possible with the Platinium dri'ves. Provided your receiver is sending RAW Un-decoded Dolby Digital signal to the dri've.
    If it is already decoded, the signal being sent through the optical cable will only be received as Stereo..if I'm not mistaken.
    Someone else with hands-on experience will have to give you a better confirmation, as I dont have a Platinium dri've before. But I know its possible.

  • Dolby Digital dropouts on Apple TV

    I have the latest model ATV connected via HDMI to an Arcam receiver which can decode Dolby Digital via that cable. The ATV is connected to my network via ethernet but I get regular dropouts of DD sound – the sound disappears for a second or two and the amp shows a message '3/2.1 - EX off'.
    This happens on Streaming movies over Netflix or playing iTunes content from my mac.
    The file is not at fault as replaying it will often have the sound dropping out at different points in the movie and earlier dropouts will usually play normally. Itunes was downloading in the background but would this affect replaying of a movie file or the straeming of a netflix movie?

    Probably not the case but do check all you speaker cables are secured properly - I once had random dropouts and one of the the centre speaker cables had come partially loose and a few strands were intermittently shorting with the counterpart causing the amp to shut down audio momentarily.
    Personally I'd try a different HDMI input or cable if the Arcam has a separate input.
    AC

  • Any updates on Dolby Digital 5.1 bug on BT's Youvi...

    Are there any updates on Dolby Digital via the BT app? It's been 6 month since the bug forced us to have to switch to stereo and then back to surround in order to make any of the content play. I'm surprised BT has left this bug around to languish so long.

    Hi All,
    I believe this issue is fixed in the latest version of youview software and will come along in the imminent (or infamous depending on viewpoint!) IP channel recording build.
    Steve
    BT TV Expert
    I am a BT Employee and an expert on TV queries. I am here volunteering my own time to give advice, primarily on the BT Vision+ and YouView boxes. Go here for more info.
    If my post has been helpful, please click on the Ratings star on the left-hand side of the post.

  • X-Fi Fatal1ty Pro cannot see 5.1 Dolby Digital input via Optical link (mods, please he

    X-Fi Fatalty Pro cannot see 5. Dolby Digital input via Optical link. I am pumping my Xbox360 through the Digital I/O dongle and every thing works OK using Dolby Stereo, outputing to my 5. analog speakers. However, it does NOT work when choosing Dolby Digital 5.. My SPDIF tab just says unknown input.
    Please help, this is very frustrating...

    Ok, for those who also wanted to know the outcome, I though I'd post.
    I was told that the dongle cannot decode 5. to analog, but the Dri've Upgrade and the Console Upgrade could (at $80/$80 vs. $5).
    Great.
    So what I want to know is this:? what chipset or connection is Creative putting in the Dri've Upgrade and Console Upgrade? It seems to me that the card should be doing the decoding, not the type of optical port. If it's getting the signal, then what is the problem? Is is that the flexijack cannot output/input 5. at all, only stereo?
    Anyway, the Digital I/O dongle is going back, the thing is useless for my purposes. While I can hear 360 games fine, DVD's on it default to 5. if they have that type of audio, and there is no way to switch it to stereo; it gives me only silence then.
    And mods, nothing in my frustration is with you; you seem to be very helpful and responsi've. I just wish the rest of the company would get on the ball.

  • Digital Hiss Noises via Toslink

    My audio interface is from the digital outs on the G5 to a Rosetta 200. While using the audio core drivers for Logic Pro, Abelton Live, Reason and Garage Band, I am hearing a hiss noise from the digital I/O via toslink.
    There is not much feed back regarding the matter, but does anyone knows anything about hiss noises from the G5?
    Any in put would be appreciated.
    Daz
      Mac OS X (10.4.7)   Dual G5, Logic Pro7, Rosetta 200

    what was the resolution?

  • What settings need to be adjusted to send out Dolby digital ,DTS from inputs such as Netflix to the video output via an adaptor to HDMI?

    Hi. I can only stream picture and PCM out of my Mac BookPro. What settings need to be adjusted to output Dolby Digital or DTS to an HDMI adaptor had thence onto my AV Processor?

    The Audio Midi Setup utility may need to have its settings updated.
    That's if you have the right adapter:
    https://discussions.apple.com/docs/DOC-2821

  • Dolby digital pass-through via digital input - static

    anybody try to hook up a dolby digital 5.1 source (i'm using a dish network vip622 dvr receiver) into the mac mini's digital input and pass the signal through to the speakers connected to the mini? i'm doing this but all i get is static - presumably because there is no decoder inside the mini.

    forgot to say - i'm also using linein from rogue amoeba
    http://rogueamoeba.com/freebies/
    sj

  • No audio via HDMI when Dolby Digital set to 'On'

    I've just discovered that, to get my ATV2 to output 5:1, I have to switch the Dolby Digital setting from 'Auto' to 'On'. This doesn't make much sense of 'Auto'.
    Also, when I switch DD to 'On', while I do get a 5:1 stream from the optical output, I get no audio from the HDMI connection. Is there some logic to this that escapes me?
    Thanks in advance,
    Steve  = : ^ )

    I recently upgraded from the 2nd last generation Apple TV (which only ouput up to 720P) to the latest generation.  I cannot get ANY 5.1 audio output with the latest generation, but it was working fine with the older model.
    This is completely frustrating and a joke. 
    I have a Denon 3808 receiver, which was brand new in 2007.  The fact that the new Apple TV won't 'talk' to this receiver properly is completely unacceptable.
    I have tried both HDMI and optical outputs, and have tried all combinations of Auto/On and Auto/16 bit for the sounds settings on the Apple TV.
    Anyone been able to make it work with this receiver?
    Thanks

  • Dolby digital 5.1 from mini port while in windows?

    Hello all,
    I'm running the most current of all software, and I'm trying to get 5.1 dolby digital from the mini port to HDMI? All I can get is 2 channel. Is it possible to get this to work? I'm using KM player and I'm certain this player supports 5.1 output. Any advice would be helpful. Do I just need to buy a toslink (optical cable) or is there a way to make this work?
    Nate

    As far as optical out goes, stereo sound from MP3s/WAVs/AACs etc, and stereo soundtracks seem to get converted by the Apple TV to a linear PCM type bitstream. Since Take 2.0 AppleTV can also output dolby digital 5.1 bitstream but does not need to do any onboard decoding.
    Most amps/receivers that can accept an optical audio feed from a DVD player should do fine (certainly for the 5.1 DD). I would imagine if you are connecting via HDMI to the amp/receiver then you would have no trouble with any modern amps that support HDMI.
    AC
    AC

  • Digital Connections, SPDIF and Dolby Digital Info

    I have noticed that many people have problems using their digital connections, so I put together this info to try and explain the difference between digital and analogue, and how to use them.
    Digital ConnectionsDigital connections come in two standard forms, optical and coax. They both give you exactly the same result, the only difference is the medium (material) through which the signal travels. The thing to remember about digital is that for ordinary, uncompressed sound, it will only carry a stereo signal. So, if you like to use CMSS with your music, or you try the speaker test function, optical/coax is useless as you only hear the front left/right speakers.
    Movies wth Dolby Digital (AC3) & DTSMovies on DVD often use encoded audio in the form of Dolby Digital (AC3) or DTS. This means that all 6 channels are compressed into a single stream of digital data. A decoder is required to extract the channels and send the sound to the correct speakers. There are three ways to do this.
    ) Pass the AC3/DTS signal to a external decoder. This is where your optical/coax connection is used. To go down this route, you must first have a set of speakers or a decoder that supports Dolby Digital. In your DVD software, select 'SPDIF' as the audio output method and 'SPDIF Pass-through' in your soundcard options. What this does is tells both the software and soundcard to leave the audio from the DVD in compressed form and send it straight through the digital outputs. Your digital speakers/receiver will do all the decoding to give you full surround sound. Please note that this is the only way to get 6 channels through an optical/coax cable.
    2) Decode the AC3/DTS with your Sound Blaster.You should choose this option if you don't have an external decoder. In the DVD software, select 'SPDIF' as the audio output method and make sure that 'SPDIF Pass-through' in the souncard options is off. The DVD software will now pass the compressed audio to your soundcard, which will then decode the data. The soundcard will output the 6 channels using the analogue connections (or digital DIN, more on this later). If you try to use a digital optical/coax connection to your speakers, you will only hear faint sounds from the front left/right speakers.
    3) Decode the AC3/DTS with software.If you have a soundcard that doesn't support Dolby Digital (like the SB Li've! 24-bit) and you don't have digital speakers, the only way for you to get surround sound in movies is to use software to decode the AC3/DTS. The free versions of DVD software you get with hardware often don't support this feature, you will most likely need a full version. First select 'Dolby Digital' or 'DTS' decoding in the DVD software audio options (you must select the right sound format for the movie you are watching). Then make sure that 'SPDIF Pass-through' in the soundcard options is off. As with method (2) you must connect your speakers with the 3 analogue cables, not optical/coax.
    PC GamesPC games usually use technologies like as EAX to create surround sound, not Dolby Digital. So even if your speaker system has a Dolby Digital decoder, it will be of no use when playing games. The EAX processing is done on the soundcard, and the 6-channel sound is output via the analogue (or digital DIN if available). So you still need analogue connections to your digital speakers for games, if you just use an optical/coax cable you will only get the front left/right sound.(N.B. X-Box games do support Dolby Digital, so if you connect your X-Box to your Dolby Digital receiver/speakers with the optical cable, you can get full surround sound.)
    Creative's 4-pole mini-jack & Digital DINYou can only get the full use out of this connection when used between Creative Sound Blasters and compatible Creative speaker systems. It is the digital equivalent of the analogue connections, but instead of using 3 stereo sockets, you use just one digital socket. There are 4 conducting connections in the socket (unlike coax which has two) so there are enough connections to carry 3 different digital stereo signals (front R/L, rear R/L and Sub/Centre). You will probably require a 4-pole mini-jack > DIN converter to connect your Creative speakers to this socket. Using this connection will allow you to get surround from games (unlike SPDIF). However the digital DIN input on some Creative speakers can't receive AC3/DTS data, so you may still require an optical/coax connection.
    N.B. This digital socket on the Sound Blaster cards doubles as the digital coax output. If you don't have digital DIN, you can use a mono or stereo mini-jack > RCA converter to connect to the coax input on your speakers, as the front R/L or AC3/DTS signals are sent through the tip of the plug.
    More InfoCreative's Speaker Conectivity Guide: http://support.creative.com/kb/ShowA....aspx?sid=5035
    Dolby Surround info: http://www.dolby.com
    I hope that clarifies the issue .
    Message Edited by KokChoy-CL on 07-04-2008 :0 AM

    Digital Connections, SPDIF and Dolby Digital (german revision)
    Options
    03-08-2007 01:52 AM
    Digital Connections, SPDIF and Dolby Digital Info
    Übersetzung + Erweiterungen + Revision 03-08-07
    Der Digitale Anschluß
    Ich habe beobachtet, daß viele Leute Fragen zu den Sound-Anschlüssen haben, daher trage ich hier einige Infos zusammen und erkläre die Unterschiede in der Verwendung der digitalen und analogen Anschlüsse.
    Digitale Anschlüsse – S-PDIF & Toslink
    Am PC gibt es zwei häufig verwendete digitale Anschlußformate optisch (Toslink) und koaxial (S-PDIF).
    Im Prinzip erzielen beide Anschlüsse genau das gleiche Audio-Ergebnis.
    Der primäre Unterschied ist das Medium ( das Material ) durch das das Signal übertragen wird. ( Glasfaser oder Kupfer )
    !! Update !!
    Ein wichtiger Aspekt in der Auswahl von digital-optischen Anschlüssen erklärt sich durch das Vermeiden einer sogenannten „Brummschleife“, d.h. eine elektrisch leitende Verbindung zweier Geräte muß vermieden werden.
    ( mit Lichtwellenleiter - LWL- z.B. mit dem Anschluß-System Toslink )
    In der Elektrotechnik ( Niedervolttechnik ) wird oft der „Negative“ Pol der Spannungsversorgung über das elektrisch leitende Gehäuse ( die sogenannte Masse )geführt. Das spart einerseits einen weiteren Kabelweg ( also Kupfer ) ein und ergibt eine mehr oder weniger wirksame (Ab-) Schirmung. Diese Schirmung soll die elektronische Schaltung vor elektromagnetischen, hochfrequenten und niederfrequenten Störeinflüssen je nach Ausführung der Schirmung schützen.
    Üblicherweise besitzt jedes elektronische Gerät eine eigene Spannungsversorgung. Netzteile in elektronischen Geräten unterscheiden sich in der Art der Spannungsumformung, in der Höhe der Spannung, in der zur Verfügung gestellten Leistung, durch verschiedene Bauarten und unterschiedliche Bauteil-Tolleranzen entstehen somit verschiedenste Masse-Potentiale.
    Werden solche Geräte durch elektrisch leitende Kabel verbunden, kommt es zu einem Ausgleich der verschiedenen Masse-Potentiale. Ein negatives Ergebnis der Verbindung von TV-Geräten oder PC-Komponenten mit Audio-Komponenten ist oft eine hörbare Beeinträchtigung von Audio-Signalen - ein tieffrequentes Brummen.( auch Brummschleife oder Masseschleife genannt )
    Hierfür verantwortlich zu machen ist eine elektrisch leitende Verbindung. In der HiFi-Technik ist das in der Regel ein Koaxialkabel und dessen Schirmung.
    Vermeidung u. Reduzierung dieser Störgeräusche Ansätze
    !! Der einfache Weg !!
    Einsatz einer optischen Signal- / Datenübertragung mit Lichtwellenleiter
    - Glasfaser als Trägermaterial
    ( Einsatz einer Datenübertragung ohne elektrisch leitende Verbindungen )
    aufwendige Wege
    Einsatz einer Galvanischen Trennung - mit einem Ground-Isolator
    (Massetrennung )
    + die elektrische Verbindung der Schirmung wird umgangen
    - aber Leistungs- & und Klangverlust(geringere Dynamik)
    - Verwendung von ( hochwertigen ) symmetrischen Verbindungen
    ( „PLUS“ „MINUS“ „Masse“)
    + Trennung der Schirmung an einer „Seite“ des Kabels möglich
    [bei Koaxialkabel unsinnig weil eine Ader zerstört wird und
    anschließend dieses Kabel wertlos ist ]
    - sehr große Anschlüsse
    - Profibereich
    - Einsatz einer zentralen Spannungsversorgung für alle miteinander
    verbundenen Geräte
    Nachtrag
    Bitte nicht verwechseln mit Netzbrummen - die Einstreuung der Netzfrequenz 50 Hz ( EU ) oder 60 Hz ( US ) in den Audio-Signalweg das ist üblicherweise auf eine nicht ausreichende Entstörung oder(Ab-)Schirmung zurückzuführen ist.
    - End - !! Update !!
    Einige Vorbetrachtungen
    Die traditionelle Ton-Übertragung ist ein unkomprimiertes Signal, es wird in Stereo übertragen.
    Wenn du CMSS ( Creative Multi Speaker Surround simulierten Surround Sound ) aus deiner Stereo-Musik erzeugen willst oder der Sprach-Test abgerufen wird ( nur über den Center ) ist der digitale Anschluß ( optisch & koaxial ) unbrauchbar, denn es würden nur die Lautsprecher Front-Rechts und Front-Links angesprochen !! Es wird ein anderer Anschluß benötigt, der die Kanäle einzeln ansteuert.
    Für das Format 5.1 ist das die Verbindung über die drei 3,5 mm Klinken-Stecker ( 3 mal 2 Kanäle ) mit der folgenden
    Kanalzuweisung 5.1
    Front R / Front L + Rear R + Rear L + Subwoofer / Center
    Mehrkanalton in Filmen - DolbyDigital (AC3 / DD) oder DTS
    Filme auf DVD verwenden häufig ein kodiertes Mehrkanal-Audiosignal, in der Form DolbyDigital ( AC3 / DD ) oder DTS. Bei dem gebräuchlichsten Format 5.1 werden 6 Signale ( 3 mal 2 Kanäle ) in einem digitalen Datenstrom zusammengefaßt und komprimiert = das Kodieren.
    Nach der Übertragung des Signals muß aus diesem Datenstrom ein Decoder die entsprechenden Töne trennen und jedem Kanal zuordnen = das Dekodieren.
    Drei Varianten der Decodierung sind möglich.
    (1) - AC3 / DTS Signal wird zu einem externen Decoder geführt
    Genau hier wird der optische / koaxiale Anschluß genutzt. Um diese Variante nutzen zu können, mußt du ein digitales Lautsprecher-Set oder einen Digital-Decoder ( z.B: Digital-Receiver ) besitzen, der die Dekodierung des gewünschten Formats ( DD, AC3, DTS) übernimmt. Für jedes Digital-Format benötigt man einen entsprechenden Decoder – das Handbuch weiß hier oft mehr – welches Format von welchem Gerät dekodiert werden kann !!
    Wähle in deiner DVD-Software den zur digitalen Datenübertragung gewünschten Anschluß "S-PDIF"( Koaxial ) oder "Optisch" als Audio-Ausgang.
    In den Soundkarten-Einstellungen muß die Option "S-PDIF-Durchschleifen" ( "SPDIF Pass-through" ) eingestellt werden.
    Dadurch wird das Audio-Signal von der DVD in digitaler ( komprimierter ) Form direkt an die Digital-Ausgänge der Soundkarte weitergeleitet. Anschließend kann ein angeschlossener externer Decoder z.B. im digitalen Lautsprecher-System oder im Digital-Receiver die Decodierung übernehmen und es entsteht ein „Räumliches Klangbild“.
    Bitte merken:
    Daß ist der einzige Weg 5.1 Signale ( digital ) über ein koaxiales bzw. optisches Kabel zu übertragen.
    (2) - AC3 / DTS mit der Soundkarte decodieren
    Diese Variante ist zu verwenden, wenn du keinen externen Decoder / Receiver verwenden willst.
    In der DVD-Software wird "S-PDIF" als Audio-Ausgang gewählt und es muß zwingend in den Optionen der Soundkarte "S-PDIF-Durchschleifen" ( "SPDIF Pass-through" ) deaktiviert werden.
    Die DVD-Software wird jetzt das ( digitale ) komprimierte Audio-Signal an deine Soundkarte senden und dann werden dort die digitalen Daten decodiert. Die Soundkarte gibt dann die 6 Audio-Kanäle ( bei 5.1 ) über ihre drei analogen Anschlüsse aus ( 3 mal 3,5 mm Klinke ) mit folgender
    Kanalzuweisung 5.1
    Front R / Front L + Rear R + Rear L + Subwoofer / Center
    Es wird in diesem Beispiel also ein 5.1-Lautsprecher-System benötigt, mit der analogen Anschluß-Option von drei Klinken-Steckern.
    ( also 3 x 2 Kanäle = 3 mal 3,5 mm Klinke )
    - die Einspeisung eines digitalen Signals über DigitalDIN, ist mit dem optionalen digitalen E/A-Modulbei möglich ***
    - wird hier ein optisches / koaxiales Kabel verwendest, hörst du nur schwache Töne der Front-Lautsprecher R + L
    *** Bei Karten der SB073X-Serie verfügt diese Buchse nicht über die Digital-In-Funktion !! zur Unterstützung des digitalen E/A-Moduls )
    [ mehr unten ]
    (3) - AC3 / DTS mit einer Software decodieren
    Wenn deine Soundkarte kein DolbyDigital unterstützt
    ( wie die SB Live! 24-bit ) und auch kein digitales Lautsprecher-System vorhanden ist, kannst du Raumklang
    (Surrsound-Sound ) aus DV-Filmen auch über eine AC3 / DTS fähige Software erzeugen.
    Gratis-DVD-Software-Versionen unterstützen diese Funktion häufig nicht, du benötigst dann eine Software-Voll-Version.
    Wähle die gewünschte digitale Audio-Tonspur „DolbyDigital“ oder „DTS“, im Audio-Menü einer DVD.
    Dann stelle sicher, das in den Soundkarten-Optionen "S-PDIF-Durchschleifen"
    ( "SPDIF Pass-through" ) ausgeschaltet ist.
    Wie unter (2) mußt du deine Lautsprecher mit den drei analogen Kabeln anschließen und nicht optisch oder koaxial !! ( 3 mal 3,5 Klinke )
    Kanalzuweisung 5.1
    Front R / Front L + Rear R + Rear L + Subwoofer / Center
    Generell sind bei zuvor genannten Varianten (1) – (3) auch andere mehrkanalige
    Wiedergabeformate möglich.
    In Abhängigkeit von der Ausstattung der Quelle also von der DVD. der CD. der TV-Karte, dem Game usw. sind andere Formate z.B. 2.0 / 2.1 / 4.0 / 4.1 / 5.1 / 7.1-Kanal Wiedergabe möglich.
    PC Spiele
    PC Spiele nutzen normalerweise Technologien wie EAX, die ihren eigenen Surround-Sound, ohne Verwendung von DolbyDigital erzeugen. Selbst wenn dein Lautsprecher-System einen DolbyDigital-Decoder besitzt, ist dieser für Games unbrauchbar. Denn die EAX Verarbeitung findet direkt auf der Soundkarte statt und die Ausgabe der 6 Kanäle ( 5.1 ) erfolgt über die analogen Ausgänge
    ( 3 mal 3,5 mm Klinke ) ( oder über DigitalDIN, wenn vorhanden *** ).
    *** Bei Karten der SB073X-Serie verfügt diese Buchse nicht über die Digital-In-Funktion !! zur Unterstützung des digitalen E/A-Moduls ) [ mehr unten ]
    Kanalzuweisung 5.1
    Front R / Front L + Rear R + Rear L + Subwoofer / Center
    Für Mehrkanalwiedergabe in Spielen benötigst du also Lautsprecher-Systeme mit analogen Anschlüssen oder einen Digital-Receiver mit analogem ( 5.1 ) Eingang.
    Wenn du ein optisches / koaxiales Kabel verwendest, dann kannst du nur die vorderen Kanäle ( links / rechts ) hören.
    !!! Notiz !!!
    X-Box Spiele unterstützen DolbyDigital, wenn du deine X-Box mit einem DolbyDigital-Receiver oder einem digitalen Lautsprecher-System über optische Kabel verbindest, kannst du den vollen Surround Sound nutzen.
    Die Sound Blaster Karten der SB073X-Serie bieten neben dem digitalen ( koaxial / extern ) Anschluß über den Anschluss Flexi-Jack auch noch einen weiteren Anschluß, direkt auf der Karte ( koaxial / intern )
    Flexi-Jack - DigitalDIN
    Wenn du kein digitales E/A-Modul ( Digital I/O-Modul ) benutzen kannst, ist es möglich mit einem Klinke-Chinch Adapter ( RCA-Adapter ), ein digitales Lautsprecher-System oder einen Digital-Receiver digital ( koaxial ) über den Flexi-Jack-Ausgang der Soundkarte zu verbinden. Alle MiniDin bzw. 3,5 mm Klinken-Stecker können in der Mono- oder auch in der Stereo-Ausführung verwendet werden, denn der mittlere / vordere Pin des 3,5 mm Klinken-Steckers überträgt das AC3 / DTS Signal. Dazu benötigt man eine der folgenden Verbindungen
    3,5 mm Klinke ( Mini DIN ) auf Chinch - Adapter ( RCA-Adapter )
    für den S-PDIF-Anschluß( koaxial ) an Lautsprecher-Systeme mit digitalem Eingang bzw. Digital-Receiver kann man folgende Varianten verwenden
    - Klinke-Mono - Chinch-Stecker ( Stecker –Stecker ) ( Favorit !! )
    - Klinke-Mono auf Chinch-Mono ( Stecker - Kupplung ) + Chinch-Verbindungkabel
    ( Stecker - Stecker )
    - Klinke-Stereo auf Chinch-Mono ( Stecker - Kupplung ) + Chinch-Verbindungkabel
    ( Stecker - Stecker )
    Das digitale E/A-Modul ( Digital I/O – Modul )
    Die Verwendung von optionalem Zubehör Digitales E/A-Modul ( Digital I/O-Modul ) bietet die Möglichkeit der direkten Verwendung eines S-PDIF Verbindungskabels und stellt zusätzlich zum koaxialen Anschluß einen optischen Anschluß ( Toslink ) bereit. Die optische Verbindung kann wie oben beschrieben zur Vermeidung einer Brummschleife hilfreich sein.
    Des weiteren wird ( abhängig von der Ausstattung der Soundkarte *** ) ein digitaler Eingang über das E/A-Modul bereitgestellt, der Eingang ist ebenso wie der Ausgang in optischer ( Toslink ) und koaxialer ( S-PDIF ) Bauform ausgeführt.
    Achtung !!
    ( *** Bei Karten der SB073X-Serie verfügt diese Buchse nicht über die Digital-In-Funktion !! zur Unterstützung des digitalen E/A-Moduls )
    interner S-PDIF E/A-Anschluss ( für Geräte der SB073X-Serie )
    zum Anschluß einer Decoderkarte oder externer Decoder bzw. Lautsprechersysteme mit digitalem Eingang ist ein entsprechender Adapter erforderlich
    Bei einigen Modellen ist eine Dekoderkarte im Lieferumfang enthalten bzw. in einigen Regionen als Zubehör erhältlich
    Front Panel-Sockel (für Geräte der SB073X-Serie)
    2 x 5-poliger Front Panel-Sockel nur für Verbindungen mit einem Intel HD Front Panel Audio-Standardsockel (nur Geräte der SB073X-Serie) Intel Front Panel Audio-Kabels (separat erhältlich)
    Anschlusskompatibilität
    Ausschließlich Intel HD Front Panel Audio-Standard
    Nicht kompatibel mit AC97 oder Intel-kompatiblem HD Front Panel Audio
    Einschränkungen
    Wenn neben den hinteren Mikrofonen auch Frontmikrofone angeschlossen sind, werden die hinteren Mikrofone automatisch deaktiviert.
    Sound Blaster X-Fi E/A-Konsole
    Auf der Rückseite Ihrer X-Fi-E/A-Konsole* befindet sich eine sogenannte DIN-Buchse. Um die Funktionen für eine integrierte Lautsprechersteuerung zu nutzen, können Sie an diese Buchse ausgewählte analoge Creative-Lautsprechersysteme anschließen, die über eine Kabelfernbedienung oder eine Audiokonsole verfügen.
    So können Sie beispielsweise über den Master-Lautstärkeregler Ihrer X-Fi-E/A-Konsole die Lautstärke der Lautsprecher regeln oder die Lautsprecher stummschalten.
    -eof-

  • NO Dolby Digital or DTS- Sound Blaster Audigy 2 ZS Platinum

    So after doing a clean install from Win XP to 7 PRO I now no longer can get dolby digital or dts through my speakers via toslink (optical, whatever u want to call it) . I have the latest win 7 drivers, tried reinstalling drivers using compatability mode (vista sp2), and configured it to play on on only digital outputs, spidf decode, set spdif output as my default device, set speakers to 5., and all combinations of that.
    I am also using the k lite codec pack and playing videos using media player classic.
    However, If i test dolby digital through? windows sound options it will detect and play the sample sound in dolby digital but my movies, etc will not when play through MPC.
    PLEASE HELP!

    ? You are needing to do AC-3 passthrough and you may want to use the Shark Codec Pack instead of K-Lite. Instructions for Shark's pack are here:
    http://shark007.net/forum/Thread-problem-spdif-passthrough-x-fi-decoder-Win7

  • MSI GT660 and outputtings Surround Sound (5.1 spk) via toslink (S/PDIF)

    Hi Board.
    I have an MSI GT660. I am very happy and satisfied with the overall product but I do have a single issue.
    How do I output Dolby Pro logic 5.1 channel through my S/PDIF port (toslink)? As it is at the moment I can only configure the analogue ports to output 5.1 channel Dolby Pro Logic and not my digital.
    In Windows Media Center I can configure the WMC to use 5.1 channel speakers and clicking test outputs sure enough 5.1(I hear the sound from every single speaker one at the time - incl. the sub), put just as soon as I am done configuring the sound in WMC it jumps right back to 2.1 channel.
    I have tryed configuring the sound in the Realtek controlpanel and I do choose S/PDIF in the popup windows when connecting the toslink cable. But I really can not configure the digital S/PDIF to use more than 2 channels.
    How can I setup my system to output Dolby Pro Logic 5.1 channel audio over toslink?
    Regards
    A frustrated user.

    Quote from: BlackHawk9 on 19-January-11, 10:37:07
    You're right, it was the adapter.  I bought a new cable that is already mini TOSLINK and it solved my problem.  Funny thing is that I took the existing cable I had and the adapter with the laptop to a audio/video store and tested against a new a/v receive they had there and it was working fine.  Seems that mine must be very picky on how good the optical clarity or the strength of the light is and doesn't want to pick it up.
    Okay, so this is what I found out about the speaker settings. If I run the tests within the realtek audio panel, the DTS, Dolby ones, I do get sound from all speakers, especially when playing a DVD or BluRay. Now if I play an mp3 or play something in YouTube, it will be obviously not real 5.1 or 7.1 but 2.1. Now my receiving has the surround setting where I can make all the speakers work but it still isn't true 5.1/7.1.  So overall all you get is true 2.1.  Check to see if your receiving has the ability to switch between modes such as Cinema A, B, C (5.1), then the others are Jazz, Game, Pop, etc etc (2.1).
    The realtek audio panel has nothing to do with speakers which is why there is no option. Digital audio simply is what it is. So if you're watching a BluRay like mine has, I get the true 5.1 sound and the blue light comes on indicating this.  If I play anything else, then its 2.1 or simulated 5.1 via choosing that option on the a/v receiver.
    So ultimately, you need to change the mode on the A/V receive itself. Mine can go between manual and auto, but I have seen some which are full auto and you get what you get...hopefully that's not your case.
    I'm glad I got my issue sorted out and hope this thread helps others.
    According to the online product description, the reciever does not have Cinema Studio EX. A B C mode. But it sure has true DTS and Dolby Digital. So I will try forcing it to recieve 5.1 DTS or Dolby digital when I get home from Sweden Tomorrow. Thanks for the tip.
    But it IS funny that my realtek control panel for my HTPC HAS the opportunity to configure speakers for the digital output. They are totaly alike in every aspekt so far - apart from the Dynaudio symbol all down in the bottom.
    Yaeh I to hopes this topic will help others! I sure supports your request about the sticky.

Maybe you are looking for