"Don't leave copy on server" issue

have anyone try select "Don't leave copy on server" in mail forwarding on iMS6.0?
i have three account :
test1
test2 - set mail forwarding to test3 with "Don't leave copy on server"
test3
after login to test 1 and send mail to test2,
i expect only test3 will be received this mail.
But , i received both on test2 and test3 in life envirnoment.
i also try not select "Don't leave copy on server",but also similary case.
cheer,
epee

This setting, and many others are in LDAP, and so cached in Messaging Server. The average time to make such changes take effect is 10 minutes.
Or, you could restart the MTA, to make your changes take effect immediately.

Similar Messages

I have an iPad Retina, if I download email I then cannot download the same email onto my iMac. and vice-versa. I have all settings to leave copy on server so cannot understand why email will not download to both devices.

I have an iPad Retina; if I download email onto it I then cannot download the same email onto my iMac. and vice-versa. I have all settings set to leave a copy on the server so cannot understand why email will not download to both devices. Can anyone help please?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Leave copy on server

In Outlook I have my account set to leave a copy on the server on my laptop and not to on my desktop. Can I do this with MacMail?

If I understand your question correctly.... Yes, in the Preferences --> Accounts area of (Mac) Mail you can set your e-mail account(s) to leave a copy of the messages on the mail server. This setting allows for mail message to be left on the server for specified times or functions.
In Outlook I have my account set to leave a copy on
the server on my laptop and not to on my desktop.
Can I do this with MacMail?

HT1146 leave copy on server

how do I keep a copy of an email when I delete a copy on my I-Pad?

If I understand your question correctly.... Yes, in the Preferences --> Accounts area of (Mac) Mail you can set your e-mail account(s) to leave a copy of the messages on the mail server. This setting allows for mail message to be left on the server for specified times or functions.
In Outlook I have my account set to leave a copy on
the server on my laptop and not to on my desktop.
Can I do this with MacMail?

Leave copy of email on server...

To enable download of email to multiple email programs e.g. iPhone and Outlook please send this as an enhancement request...
It needs to be a new advanced setting within each email account.
"Toggle on:off : Leave copy of email on server."
This is different to the option / function "deleting email from server" after download ...
You would have noticed email received (not even read) on the iPhone will no longer be able to be download to other email programs as the server will have noted it has been downloaded. If the phone leaves a copy it is avaioable to download by another program.
This will make using an alternative workaround of using MAPI instead of POP unnecesary.
Rgds Steve.

mbiphone,
The iPhone leaves messages on the server by default.
Outlook and Outlook Express do not.
And it is the same setting, just worded differently. Delete from the server tells it when to remove it. If you set it to never, that means the iPhone will not remove it from the server. It is the same setting, but with more control.
If you want to have the status of the message synced to the server IMAP supports this, and has a longer track record than MAPI.
Hope this helps,
Nathan C.
NOTE: Google using POP3 and some other POP3 servers may remove them from the mailbox after it has been downloaded by one mail client, that is a server side setting. For Google you just need to add recent: before you user name to prevent that. However, you will get copies of your sent messages when using recent: This article in Google's Help section has more about it with GMail:
http://mail.google.com/support/bin/answer.py?answer=47948

Lion Server issues

I recently set up a Lion Server to test it out as a home server but I seem to be running into a lot of issues. All computers are running OS X 10.7.2
What I'm attempting to accomplish:
I'm attempting to create a network test user with a remote home folder (on the server) and log in to that test users account from my macbook pro. I would like that account to use mobile sync to copy over documents and pictures whenever the user logs on and off. I would also like to be able to VPN into my server while out and about to screen share & share files. This test user is simply for testing purposes as of now, once I get it all working I want to set this same config up for my current local users.
What I've done:
I've configured the server to manage domain accounts, and given my server a static IP of 192.168.1.105. I configured it's hostname as a Internet hostname and registered that hostname with Dyndns.com pointing to my External IP address. I also set up my Linksys router with the DynDNS information so that it updates my Dyndns account with my external IP, and port forwarded every VPN port on Apple's list of ports. Server admin tools have been installed, DNS is turned on, and its configured as an Open Directory Master. My macbook pro's dns settings are configured so that it sends everything through the server, and the server is set up to forward all inquries out of my router that it isnt authoritative for. The MBP is bound to the Open Directory and is allowing network accounts to log in. I set up a shared folder on the server that can be used as a home folder.
Issues I've run into:
My network account (Test user) cant log in on my MBP unless it creates a local home folder, which I dont want it to do (i want it to use the shared folder i set up on the server). When I attempt to log in I either get an error, or it shakes, not allowing it to log in. I cannot get the VPN to work, but I'm not too worried about it at this point, I'd rather get the users up and running first. I've spent a ton of time attempting to figure this out and its getting very frustrating. I followed the setup guide provided by wegotserved.com and anandtech.com. If anyone has any suggestions, or see's something I'm doing wrong I appreciate any input.

Yeah, I can log into the server using the OD account I created called test user just fine, I just cant get on my wireless client (macbook pro) with the OD test user account.

Help!Electronic noises,server issues,console messages,ethernet -PowerPC G4

I've been searching the internet as well as the Console and Activity Monitor for answers to this scenario, and it looks as though there is some kind of relationship between recent strange sounds I have been hearing over my speakers and server issues (my IP? Apple servers? spyware? )
Immediately below, are some of the log messages I have copied (for terminology examples).
Below them will be the description of the sounds I've been hearing, and potentially related details.
The first of the log examples documents something that happened when no one was home to use the computer. The second describes some kind of process that might be suspicious. The third describes what is happening a lot lately, and it seems to correspond with the sounds I referred to as well as with simultaneous increases in network activity shown on the Activity Monitor
Apr 8 14:01:13 Macintosh kernel[0]: System Sleep
Apr 8 14:01:13 Macintosh mDNSResponder: Couldn't read user-specified Computer Name; using default “Macintosh-000000000000” instead
Apr 8 14:01:13 Macintosh kernel[0]: System Wake
Apr 8 14:01:13 Macintosh kernel[0]: Wake event 0020
Apr 8 14:01:14 Macintosh configd[65]: posting notification com.apple.system.config.network_change
Apr 8 14:01:16 Macintosh kernel[0]: USB caused wake event (EHCI)
Apr 8 14:01:16 Macintosh mDNSResponder: Couldn't read user-specified Computer Name; using default “Macintosh-00112474A206” instead
Apr 8 14:01:17 Macintosh kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
Mac OS X Version 10.4.11 (Build 8S165)
2009-04-09 23:06:12 -0400
2009-04-09 23:06:18.315 HPEventHandler[216]: DebugAssert: Third Party Client: (NULL != m_lock && 0 == errno) Can't create semaphore lock[/Volumes/Development(Build System)/HP/Mac-Fontana/mac-software/components/HPEventHandler/Sources/Core/HPTM NotificationManager.cpp:62]
2009-04-09 23:06:25.995 SystemUIServer[207] lang is:en
Will Power On (Wake) Notification occurred.
2009-04-09 11:21:49 EDT - Network transition occurred.
2009-04-09 11:21:49 EDT - Network transition occurred.
2009-04-09 11:21:49 EDT - Network transition occurred.
2009-04-09 11:21:55 EDT - Network transition occurred.
2009-04-09 11:21:55 EDT - Network transition occurred.
2009-04-09 11:21:55 EDT - Network transition occurred.
2009-04-09 12:01:12 EDT - Sleep Notification occurred.
I have recently been getting both a tapping and a buzzing sound through my speakers. Both kinds of sounds come together, intermittently and repeatedly, and each time, the volume rises, peaks, and fades away again (or stays faint until it starts to rise again). Today, once, there was a squeal-ish sound (not like a fax) as well, paralleling the other sound. These episodes vary in duration.
The Activity Monitor has shown increases in the Network window when these sounds have occurred, but I don't remember whether the greater increases were incoming or outgoing--I think, incoming.
When this first started happening, I was also seeing a lot of "Network Transition Occurred" messages in the log. Now I am seeing mostly "Macintosh mDNSResponder: Couldn't read user-specified Computer Name; using default "Macintosh-000000000000” (or “Macintosh-00112474A206)” instead" messages.
It all started happening after I uninstalled a trial version of ProtectMac (at the end of March), as well as set up a separate log-in for my grandson to use (major changes for the first time in years, which also caused me to lose a lot of things like bookmarks, saved music in iTunes, home movies in camera related software, pictures in iPhoto, etc...). Somewhere along the line I also lost iSync and just left it off.
Are these noises servers trying to communicate with my computer, which I somehow happen to be hearing as transmitted static/feedback/or signaling?
I have a 1.42 GHz PowerPC G4. I use a DSL, ethernet.
Thank you.

Hello,
Try these DNS numbers.
Try putting these numbers in Network/Advanced/DNS.
Add these numbers to DNS Servers
208.67.222.222
208.67.220.220
Click OK. These are safer/faster than most ISP's NDS numbers, and have been patched against DNS poisoning.
Go here to test DNS. https://www.dns-oarc.net/oarc/services/dnsentropy
Carolyn

HP Connected server issues

My printer has been working well *. since I purchased it earlier this year. until about a week ago when I upgraded to the next level Instant Ink plan. Since then when I try to print the display on the printer shows a rotating circle with the word Printing. This remains for around 2 minutes, without printing anything, and then I get a message on the display that tells me that "The printer cannot connect to HP Connected". At the same time I get a pop up on my PC that "warns me" that the printer cannot connect to HP Connected and that this may cause my printer to stop printing. The terrible message concludes with the meaningless "OK" statement, having urged me to follow the printer's on screen display to make the connection. When I try to follow the instructions on the printer it merely confirms that the printer is connected. I usually cancel out of the setup and then, as if by magic, whatever I tried to print suddenly starts printing. So, my questions are?
1) Is this a common or at least know problem?
2) Is it caused by my having changed Instant Ink plans and if so what has HP done to cause this?
3) I have not knowingly changed anything on my system other than the HP Instank Ink plan so why does the printer no longer connect to the HP Connected server to update that system with details of my print usage?
4) Is there a fix/workaround that will prevent me from having to manually coax my printer to work again?
I have already used the HP Updates function and have reset/restarted both the wireless router and my PC.
* I do occasionally get messages saying that the scan function isn't available because it's lost connectivity but this seems to rectify itself without having to do anything else.

Hello GaryG888,
Welcome to the HP Support Forums!
Thank you for the very informative post. With that great info I think I know what has happened. Over the weekend (24th, 25th & 26th) there had been Web Service server issues. As of right now, here is the fix and or workaround: Re: How do I correct the date on my HP Envy 4500?
Please follow up and let me know if this helps you.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Leave switches in "Server" mode or Not

I have multiple switches at different locations ( 16 ) I was hoping someone could explain wheather to leave "All" switches in vtp server mode. I have not created any vlans and I don't think that I will at this present time. So the question is, will there be any problems if ALL switches are left in "Server" mode???

Hi AJ69,
Are you trunking between the switches? Cisco does not recommend either leaving them in Server/Client or Transparent mode but many enterprises prefer transparent mode for the following reasons:
This practice encourages good change control, as the requirement to modify a VLAN on a switch or trunk port has to be considered one switch at a time.
VTP transparent mode limits the risk of an administrator error, such as deleting a VLAN accidentally, and thus impacting the entire domain.
VLANs can be pruned from trunks down to switches that do not have ports in the VLAN. This results in frame flooding that is more bandwidth efficient. Manual pruning also has a reduced spanning-tree diameter. A per switch VLAN configuration also encourages this practice.
There is no risk from a new switch being introduced into the network with a higher VTP revision number and over-writing the entire domain's VLAN configuration.
You can find more information on the following website:
http://www.cisco.com/en/US/customer/products/hw/switches/ps700/products_white_paper09186a00801b49a4.shtml
HTH,
Rakesh

Special Permissions to not allow COPY from server

Here's the scenario. We host a Drive, on the Airport Extreme, called "SERVER" - all computers can mount it over the network, copy to and from... all is well.
What we'd LIKE to be able to do....
Have it set, so that no one on the network (Other then a special permission user, or someone with a password) can actually COPY, locally to their LapTop Drive... but everyone can OPEN, Modify, and Save the documents on the server, over the network.
We have several interns coming into the studio, that we'd like to be able to work on these documents.... enter information, even print out, while open in an application... but not save locally. At the end of the day, none of these documents leave the building / server / network.
This even possible with a standard Airport Extreme hosted Volume?

Ya, I figured... even as I was typing it out, I'm realizing that if the document was open on their machine, for adding data.... they'd need to "Not have write access to their own Drive / Computer" to save the document locally.
My only hope, of intention, form the "Original Post" was to see if there was a way, on a "FILE Level" to "Lock a document to a directory" so that it could be modified, saved, re-saved THERE, but NOT Saved, or copied to any other directory.
A special permission, that allows you to open, save, and print a doccument, thats "Permission locked" to a specific folder, or location, but any attempted "Save As" - and changing the location, results in an error, a "You can not copy This doccument"

Mac Mail won't remove copy from server

My mail remains in the ISP's Inbox despite the proper setting in my Mac Mail program to remove copy from server immediately after downloading. Even after I close my mail program, the old mail will not be deleted. I must go to my Inbox via the Net and delete the mail with a global tag/delete.
This problem began 5 to 7 months ago. Before that the auto deletion worked fine, and it worked fine in older versions of OS X. Is this an ISP compatibility? A bug in the current Mac Mail release? A bug in Tiger?
I asked my ISP and his first reply said this is one of many bugs in Mac Mail and I should switch to Thunderbird. I'll look at that but I prefer to use Apple software.
After 4 years I know how seldom Apple debugs Mail and Safari. Does anyone know if an update of Mail is on Apple's schedule?
iMac and others Mac OS X (10.4.8)

Try changing the setting to After one day or When moved
from Inbox (and leave it at that), to see whether it’s just the Right > away setting that doesn’t work or that Mail fails to remove messages > from that server no matter what the settings.
I'll do that.
BTW, have you actually tried using another mail
client such as Thunderbird
to check whether the same happens there as well?
My ISP, who hosts a university and has a higher percentage of Mac users than most, recommended Thunderbird so I presume it does well here at Ntelos.net
Once upon a time, for two decades as the active proprietor of the Freeware Hall of Fame, ( www.freewarehof.org ) my 12-hour-a-day hobby was installing and testing applications and utilities. I guess I'm tired, because it no longer sounds like fun.
iMac and others Mac OS X (10.4.8)
iMac and others Mac OS X (10.4.8)

Cannot download the evaluation copy of Server 2012 R2

Apologies if this is in the wrong place but I don't know where else to put it.
I am trying to download an evaluation copy of Server 2012 R2 from the TechNet Evaluation Center. I have tried both ISO and VHD forms but am getting the error below (that shown is for VHD) and so have not been able to access the software.
Server Error in '/en-us/evalcenter/wizards' Application.
The remote name could not be resolved: 'emailinterchangeapi.trafficmanager.net'
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Net.WebException: The remote name could not be resolved: 'emailinterchangeapi.trafficmanager.net'
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[WebException: The remote name could not be resolved: 'emailinterchangeapi.trafficmanager.net']
System.Net.HttpWebRequest.GetRequestStream(TransportContext& context) +1003
System.Net.HttpWebRequest.GetRequestStream() +23
System.ServiceModel.Channels.WebRequestHttpOutput.GetOutputStream() +130
[EndpointNotFoundException: There was no endpoint listening at https://emailinterchangeapi.trafficmanager.net/TriggerRequestNotification.svc that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.]
System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) +10267530
System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) +539
MS.Marketing.RegSys.Proxy.EmailInterchangeApi.ITriggerRequestNotification.Send(RequestBase request) +0
MS.Marketing.RegSys.Proxy.WizardTrigger.Submit(TriggerData triggerData, SubscriberInfo info) +980
[TriggerException: The wizard contains trigger data, but the trigger could not be submitted]
MS.Marketing.RegSys.Proxy.WizardTrigger.Submit(TriggerData triggerData, SubscriberInfo info) +1357
RegSysServices.Clients.MsiMapper.SubmitTrigger(WizardResponse response, TriggerData triggerData, CustomerEmail profileEmail) +473
RegSysServices.Clients.MsiMapper.Write(WizardResponse response, TriggerData triggerData, Int32 localeId) +2460
RegSysServices.Clients.AuthenticatedProfileClient.Save(MicrosoftIdentity id, Int32 localeId, WizardResponse response, TriggerData triggerData) +41
MS.Marketing.RegSys.WebControls.<>c__DisplayClass48.<DoCompleted>b__40() +172
MS.Marketing.RegSys.WebControls.Wizard.TryAction(Action a) +162
MS.Marketing.RegSys.WebControls.Wizard.DoCompleted() +1509
MS.Marketing.RegSys.WebControls.Wizard.PageNext() +749
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +115
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +140
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +29
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2981
Version Information: Microsoft .NET Framework Version:2.0.50727.8009; ASP.NET Version:2.0.50727.8010

There's no way I know to convert from an eval license to a ROK license. The HP ROK media needs to be installed on the server in order to use the ROK license. In fact, if the operating system is installed using the ROK media, the installation
should be pre-activated and no post-installation activation should be required. I'm afraid a reinstall using the ROK media may be your only option.
Merv Porter
=========================

Mac mail server issue?

All of a sudden, from out of nowhere, my mac mail connection has gone dead. This is one of the error messages I receive:
"The SMTP server “smtp.mac.com” rejected the password for user _____."
I re-enter the correct password... then I get this:
"There may be a problem with the mail server or network. Check the settings for account “________” or try again.
The server error encountered was: The connection to the server “mail.mac.com” on port 143 timed out."
Repeat process... on and on and on.
Can anyone help?

There are server issues with .Mac - incoming and outgoing mail servers.
I copied this from under Support via webmail access for my .Mac account.
+100% of members might experience slower than normal response when using IMAP mail. Mail can be sent and received using .Mac webmail. Normal service will be restored ASAP.+

Mail.app on Leopard & Tiger glitch with "leave mail on server" setting.

A coworker has configured her two Macs (one at work, running 10.4.11; and one at home, running 10.5.8) to download email from a single POP account on our company server, using Mail.app on each system.
She did this by using the "Remove copy from server after retrieving message:" setting checked on, and with "after one month" selected from the associated pop-up menu.
This worked fine for her for a few weeks, but recently both computers seem to have lost track of which messages they've previously downloaded. As a result, whenever she checks mail, both versions of Mail.app want to download the roughly several thousand emails stored in her inbox.
Is there some known glitch in Mail that explains this? Or is there some interaction between the two Mail apps that might be creating confusion? Or is that setting just not intended to work the way we're expecting?
I personally use that same approach to manage mail between a couple of devices and mail clients (including a copy of Mail.app), and have done for years without anything like this behavior, so I'm baffled.
Thanks for any advice!

Restoring Lost OS X Files
If you erase or otherwise "lose" an OS X system application or utility (such as Mail or Disk Utility, for example) you can restore them without having to reinstall OS X.
Download the shareware utility Pacifist. Read the documentation. Use Pacifist to extract a fresh copy of the missing application from the file archives on your OS X Installer disc. The file archives are usually found on the installer disc in the /System/Installations/ folder.
After restoring the application you need to reinstall the OS X Combo Updater for the version of OS X you currently have installed. This assures the new copy of the application is updated to the current version.
Lastly, it's a good idea to repair permissions.

HT3228 How to Get iPad to Leave Messages on Server

Trying to set up email on iPad, but use home computer as "main" email. Therefore, want to leave copy of messages on the server when I check mail through iPad.
Set up 2 email accounts on iPad through the "other" email account type, and told both to "Never" delete emails from server (Settings --> email account --> Advanced tab). Yet every time I check for messages on iPad, it's still deleting the messages from the servers.
I have mail app set up the exact same way on my iPhone, and iPhone works as expected... messages are still left on the server.
Troubleshooting:
- Have tried connecting to email server through both the WiFi and the AT&T 4G net (WiFi disabled), same results... iPad is still pulling messages off server.
- Have deleted and re-created both accounts on iPad, still does not work as advertised
- When I have the mail app open on the iPad and I click the "send/receive" button in Outlook 2010 on my home computer, I get an error message that the account is already "locked" and in use by another application. I do NOT get this same error message when the mail app is open on the iPhone.
Wondering if the iPad is defaulting to set up the account as a IMAP vs POP account (I do not get the option to choose this on the iPad like I do on the iPhone)? If so, this is definitely something that needs to be fixed in the iPad app.

Disregard. After 3+ hours of troubleshooting, found iPad is working properly, leaving the messages on the main server. Found that when I tried to download them to my laptop, they were getting intercepted by a SPAM filter. I had tested the iPhone first, and the filter let those go through, but after that it decided the rest were SPAM.
I hate feeling like a kriffing idiot. :-) Aargh!!!!

"Don't leave copy on server" issue

Similar Messages

Maybe you are looking for