Doubt in System creation

Hi I got a doubt on creating the system in process of implementing the ESS for ECC 6.0 .
In setting the system landscape the doc described the following two lines. 
  a.      Set up a system on the Portal J2EE server on which the business package is installed. Assign the alias SAP_WebDynpro_XSS to this system.
Is it mentioning to create system alias FOR  the Portal J2EE server or ON the Portal J2EE server?
Thanks in Advance.

Hi.
I suggest reading [Configuring the Business Package for Employee Self-Service (ESS) u2013 mySAP ERP 2004|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a]. Of course it's about previous versions both of Portal and ESS, however it still can be helpful how to guide.
Best regards,
Aliaksandr

Similar Messages

  • Source system creation

    hi experts,
    this is the first time i am creating source system
    i am have requirement to load data one bw system to another bi system,
    so, to do that i defined and created logical system in bw for bi system and
    i created same for bw in bi system also and everything is ok.
    i guess my next step is to create source system(my self) for bw in bi .
    when i am trying to create it is showing that it is already exists.and here what type of source system i need to choose. i am not founding any my self bw data mart
    status symbol under  source system creation node and what type of the source system i need to choose and whether it is manually or automatically.if i choose automatically it is asking create new destination ,create back ground user and connection of source system to bw (it is asking to fill all fields),for manual system creation only logical system and rfc destination. is it required to creat source system or not because my self bw data mart symbol is present in bw system and bi system also.please correct me if anything wrong
    thanks
    venu

    hi chandra shekhar &chitrat,
    thanks for your quick reply,when i choose sap business information symbol
    it is asking to fill all the entries like crate new destination under this i provided
    target computer in this i provided ip address of bi system( i am creating in bw system),system id & system number,and  back groung user in source system and
    password ,connection to the source system ,target system for back ground user
    and connection to the source system what i need to provide
    thanks
    venu

  • Source System creation in BI 7.0 for SQL Server using DB Connect

    Hi
    My requirement  is to extract data from SQL Server 2005 to BI 7.0 using DB Connect.
    I need to create a SOURCE SYSTEM for that purpose,As i am new to BW i don't know how to start to create a  SOURCE SYSTEM.
    What are the parameters i require either from Basis team to install or for DB team User ID in SQL (What type of user).
    Questions:
    1)  create a db user with authorization to read this views.......as i created views on tables...do i need authorisation to read table or views
    "On BW Server side (If BW server isn't based on SQL Server):
    (1) Install SQL Server client and test connection to SQL Server DB.
    (2) Install DBSL of SQL server (download lib_dbsl_<num>.sar file from service market and sapcar to BW kernel)"
    How can i know on which server our BW System is Based and HOW Install SQL Server client and test connection to SQL Server DB and
    Install DBSL of SQL server (download lib_dbsl_<num>.sar file from service market and sapcar to BW kernel
    and
    how to create Source System to SQL Server on BW
    Please update me in details i this is my first Source System Creation in BW
    Thanks in advance

    go through the link this may be helpful                  http://msdn.microsoft.com/en-us/library/dd299430.aspx

  • No option for system creation in system landscape.

    Hello all,
               I have the super admin role and i have checked the permission for applications in Syst Admin -> Permission ->Applications, it shows " owner " but still i am not getting the option for system creation when i go to Sys Admin->Sys Conf->Sys landscape->
    It is only showing the option to create folders, change ID and Refresh. Earlier I used to get the option and i have created some "Systems" but now niether i can create nor i can open the existing system objects.
    Thanks,
    Neil

    Hi,
    Try by assigning administrator role for the user. it will work.
    If not come again.

  • Error while source system creation/Source system transport

    Hi,
         In our BW implementation, the system landscape is only 2 servers. One is BW Dev, another is BW Prd. All configurations are done in BW Dev and I extracted the data from QAS for this BW Dev system.
         Since we can’t create the source systems in the BW Production system, I tried to create the source system for the SAP R3 Production system in BW Dev and trying to transport this to BW Production Instance.
         I have two queries.
    1.  Is this way is correct for creating the Source System for BW Production system?
    2. When I tried to activate the source system I am getting the following error messages. (I tested the RFC Destinations. There is no problem, I also done the configurations for logical system creation and client assignment in both the systems).
    Error in source system GWPCLNT900
         Message no. RSAR502
    Diagnosis
         With Remote Function Call to system GWPCLNT900 error connection closed
         (no data)  ccurred.
    Procedure
         Remove the cause of the error.
    When tried again I got the following error message
    Basic type ZSBB030 doesn’t exist. EA 447
    Result of the destination check: Timeout RSAR 375.
    Could anyone throw some light on these errors?
    Thanks in advance.
    Krishna

    Hi,
    you need to maintain the logical systems on both R/3 and BW. You also need to set up the RFC connection with users that can log in to the other system. The R/3 system must be open for customizing in scc4.
    In transaction se03 the system change options for 'Business Information Warehouse: SAP Namespace' and 'Business Information Warehouse: Customer Namespace' may need to be modifiable. I am not completely sure about this.
    The last thing I will mention is that I have seen source system creation fail when the RFC-users are system users, and the source system creation worked if the RFC-users was display user while creating the source system. The RFC-users must be changed back to system user later...
    Please look at best practice documents on a more step-by-step guide...
    Best regards,
    Christian Frier

  • ESS application systems creation in Portal content area

    Hi ESS experts,
    I had struck up in the systems creation part of the ESS implementation in EP7, ECC6.
    I have the ESS set up guide by Siddhartha Jain which is just short of details on how to set up the systems for system alias SAP_Webdynpro_XSS, ITS, and back end R/3 system creation in the system and how to test the connections.
    Can any one give a detail guide on how to set up the various systems in the Portal content directory to that the Ess application can be launched in the portal?
    I had deployed the BP as described in the guide (and guided by the forum members) and all my Jco connections are Green in color. I need to complete the system creation and user creation in the portal and launch the ESS applicaiton in portal.
    (Set up the first system on the Portal J2EE server in which the business package has been implemented and assign the system the alias SAP_WebDynpro_XSS.) Here is the step I need help!!!
    Please help, and thanks in advance,
    Regards

    Hi Vinod,
    Thanks for the immediate response.
    Can you please guide me on the below statement?
    >>>Then you need to specify the details of that system and various other properties
    Assign the aliases and then test the connectivity. <<<
    I do not know which are the system details and other properties that need to be defined to get the connection test passed. I am very new to portal and I need your advise and guidance.
    Please help.
    Thanks and regards

  • With out source system creation we have transported all the flow

    Hi all,
    With out source system creation in Quality we have transported all the data flow
    now is there any option to map the source system to transported flow.
    Regards
    Kiran Kumar

    Hi,
    you can reimport the same TR again once the mapping is done in BW from source system.
    If you have left the TR's in the import queue of BW for later import then you can reimport it again.
    This will go correctly.
    In qualtiy to do the mappings you will need development authorization.
    Thanks
    Ajeet

  • R/3 Source system creation

    Hello,
    I wish to add an R/3 system to my BI 7.0 system. What exactly do I need to enter in the "Create SAP Source System" window? Should I leave backgrounduser as ALEREMOTE? I dont see any option of automatic source system creation. Could u pls help me with a step by step solution.
    Thanks. POINTS WILL BE GIVEN.
    SD

    Hi
    Defining the source system
    As of release 640, you can use upper and lower case characters for R/3 user passwords. This is only uppercase characters for previous releases. Remember that your passwords are automatically converted to uppercase in previous Basis releases.
    As BI 7.0 System has Basis 700 below, upper and lower case passwords are important.
    So, for defining source system is almost same as ordinary BW Source System definitions.
    One more important thing is that you have to take into account the EDI Ports. This may cancel your system definition if the <spsettings are not correct. This settings must be controlled on both BI and Source System.</p>
    Here are the steps to configure Source System with Basis Relase lower than 640 in BI 70:
    1. Take a look at table EDIPORT of your BW system and note the next free number for the field "Port". This is the adjacent number of the highest entry like 'A0000000123' for example. In this case e.g. take '124'.
    2. Choose transaction "snum" and object "ediport".
    Select "number ranges" from the menu "Goto" and here the button "status".
    Change the CURRENT NUMBER of the ranges to the next free number you noted from table EDIPORT.
    If the number range of your BW system is correct please check the same in your OLTP system.
    3. Call TCODE RSA1 on BI System in BI Client.
    4. Select Source Systems on Left Menu
    5. Left Click SAP System and Choose Create
    6. Important think is, as source system has Basis Release Lower than 640, You have to give All Passwords (For BI ALEREMOTE User and for Source System ALEREMOTE User) in UPPERCASE.
    My Favourite is giving RFCCPIC for ALEREMOTE Passwords.
    7. It Must Be OK.
    Assign points if it helps
    Regards,
    Sumit

  • Error: 3816: Local System Creation during install was not successful.

    Hello,
    This is our first time installing Oracle Wokflow 2.6.3 Standalone.
    We are having problems with the Event Manager.
    When we access the event manager pages:
    … pls/wf/wf_event_html.listevents?resetcookie=T
    …pls/wf/wf_event_html.listsystems?resetcookie=T
    etc.
    We get this error:
    Error: 3816: Local System Creation during install was not successful. Please review the install log file for errors.
    Error Stack:
    WF_EVENT_HTML.isAccessible(EVENTS)
    WF_EVENT_HTML.ListEvents()
    •     The installation was successful.
    •     We cannot change the Local System in the Global Workflow Preferences option.
    •     The table WF_systems is empty.
    •     Should the local system appear in this table?
    Thanks

    Software component sap.com/LM-TOOLS with version 7.00.9.3 is found on the system but in the stack it is listed with version 7.00.9.0.
    Software component sap.com/SAP-JEECOR with version 7.00.9.1 is found on the system but in the stack it is listed with version 7.00.9.0.
    You are trying to upgrade a system with the lower version of sap.com/LM-TOOLS and sap.com/SAP-JEECOR. The other thing I notice is that if you are upgrading to  EhP4/EhP1 NW then the version of LM and SAP-JEECOR should look something like 7.01.3.0.
    Are you using MOPZ to download EhP's ? As the error message says synchronize the system with SAP Solution Manager and then generate a new stack file.
    Hope this helps.
    Thanks,
    Naveed

  • A question about item "type and release" of  source system creation

    Hello expert,
    I have a question about item "type and release" of  source system creation.
    As we know,when we create a web servie source system,there will display a pop-up which includes three items as "logical system","source system"and "type and release".
    About the item "type and release",when we push "F4" button,there will be three default selections as below:
    "ORA 115     Oracle Applications 11i
    TLF 205     Tealeaf 2.05B
    XPD 020     SAP xPD".
    Who can tell me when and how should I use the three selections.
    And also I attempted to input the item by some optional letters except the default three selections and it seems that I can input it freely.
    Thank you and Best Regards,
    Maggie

    Hello DMK,
    Thank you very much for your answer.It is very helpful for me.
    Can I ask you further about it?
    I got that it is a semantic description item.
    You said the default selections are set by our basis people.Would you like to tell me how should we creat a new value except the default ones for item "type and release"?Only by inputing the value in the item directly?But you see we canot see the new value item we created by ourself when we push "F4" button next time ,is that ok?Or do we have to ask basis people to define one new value item just like the default seletions before we use it.
    Also if possible would you like to describe detail about "This becomes important when you are troubleshooting certain issues especially when RFC connection problems."
    Thank you and Best Regards,
    Maggie
    Message was edited by: Maggie

  • Using Inbound IDOC from Java system creation of Outbound delivery

    Dear Experts,
    The scenario we are having is really very interesting. Hopefully its a good learning for me and also for others also.
    The scenario is,
    After sales order creation the details will be sent to one Non SAP system (Java) for performing some tasks related to forwarding agent decision, shipping date and etc. Once the details are finalized in that Java system then, the details needs to be transferred to SAP as "Inbound IDOC" process. For this proposed to use the SAP Jco middle ware.
    Once the details transfered from Java system to SAP then, the outbound IDOC needs to get generated automatically. Assuming the stock for that sales order line item is available. Also one more complexity is, our client is using custom transaction (ZVl10C) for delivery creation.
    Now Query is,
    1. Which IDOC, message type and Functional module needs to be used for creating the delivery automatically..??
    2. As per assumption, stock of that sales order line item should be available. Due to some business reason the stock was removed during inbound IDOC transfer then, what will happen to the IDOC..?. How to avoid this situation..??
    3. As we told we are re going to use SAP Jco b/w SAP & Java system. In this case, how the data will get transfered from Java system to SAP..?
    Thanks in advance for the replies I am going to get
    Regards,
    VEL

    Thanks for the feedback. This question is resolved

  • Doubt in BDC (Creation of Production order)

    Hi experts,
         I have a doubt in my bdc, in my bdc i am going to create production order in CO01. its working properly but after entered the date i want to click operation overview and change one particular routing workcenter. But all the workcenter have the same field name of ARBPL, if anyone have a idea plz help its urgent. Point will be sure.
    gowri

    Dear Mr.Gowri Sankar,
    As you have created a BDC for creating production order,
    once after the order creation is over u can goto CO02 and change the work centre,routing details before release.
    Please tell us when do u want to change the work centre & routing details?
    If I'm wrong,please correct me.Also please share the concept of your BDC.
    Regards
    Mangal

  • Doubts in System Landscape Directory

    Hello All,
    I got some basic doubts in SLD.
    Why do we need to store the information about the installed products and to be installed products in software catalog?
    And, what is this techncal system?
    After reading few help sites, what I understand is the following:
    For example SAP is a product and  CRM etc are the software components. We create the technical system for this product like for client 100 we create a technical system and for client 200 we create another technical system. And we give some logical names, called business sytems, to these technical systems.
    My second question is, why do we need to create all these information(the information in SLD)? Why cant we directly create messages types, message interfaces etc and configure them in Integration directory without using the information in SLD like business system?
    In Integration Directory, we say that the sender is one Business System and receiver is another business system. These business system are created based on some technical systems. These technical systems are based on some software components and product. This product and the software component might be a installed or non installed product. Then how do we can get the connection between the sender and the business system? Can you please explain me the idea behind considering the sender and reciever as business systems.
    Can anybody please clear the above doubts?
    Priya

    Hi Priya,
    <u><b>SLD:</b></u>
    The System Landscape Directory of SAP NetWeaver (SLD) serves as a central information repository for your system landscape. A system landscape consists of a number of hardware and software components that depend on each other with regard to installation, software updates, and demands on interfaces.
    - so talking about the working of an SLD, here if any information is required for the integration server regarding the systems(logical or physical) and the software (installed products) it refers to the SLD.
    - to tell you about the other features it has....it captures the dimensions of the system landscape like solution dimension, transport dimension and technical dimension.
    - putting it in short XI IS A CLIENT OF SLD
    Also go thru this link and understand more about SLD <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/31/f0ff69551e4f259fdad799a229363e/frameset.htm">System Landscape Directory</a>
    <u>
    <b>SOFTWARE CATALOG:</b></u>
    The SLD contains a Software Catalog of all installable SAP products and software components. The Software Catalog includes information about support packages and dependencies between the products and software components. This information is the basis for the description of the system landscape.
    Also go thru this link and understand more about Software Catalog <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/a2/2999ef97ea2b4790165f9ca5c05c41/content.htm">Software Catalog</a>
    <u><b>TECHNICAL SYSTEM, BUSINESS SYSTEMS, SOFTWARE PRODUCTS:</b></u>
    Technical system correlates the software to the physical host on which it is installed
    Or in other words Technical systems are application systems that are installed in your system landscape.
    - they are actually the basis for defining the business systems.
    - we assign a technical system to a business system to help the SLD make the appropriate association.
    - the software products used by the business system are got from the technical system definition.
    - to note 1 technical system can have more than one business system assigned to it....and as told the SLD make the appropriate association between them.
    Also go thru this link and understand more about each of it:
    <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/24/8fa93e08503614e10000000a114084/content.htm">Technical Systems</a>
    <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/42/c817d9d2296bb2e10000000a1553f6/content.htm">Business Systems</a>
    <a href="/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation Preparation</a>
    Regards,
    Abhy

  • IN R/3 SYS logical system creation

    Hi people
             in idoc2file scenario i created logical system for 2 clients
              1. is for r/3 system for example 800 (LS800)
              2. is for pi system for example 100(LS100)  in r/3 system only i created this two LS
    so creation is completed
             after that what i did, assigned clients  this client should be a cross are not means
       we have to assign          800 to LS100
                          and           100 to LS800   this is correct are not 
    pls tell me to ASAP
    regards
    shekar

    we have to assign 800 to LS100
    and 100 to LS800 this is correct are not
    No. There is no such cross assignment. For a particular client, u have to assign the logical system name and thats it
    Regards,
    Prateek

  • JAVA iso9660/UDF file system creation

    Is there a class or utility in JAVA that will allow the creation of an iso9660 file system for CD's and/or the creation of a UDF file system for DVD's? I am looking for such a class to incorporate into an applcation that is currently under development, and would rather not have to write our own.
    Thanks.

    Is there a class or utility in JAVA that will allow the creation of an iso9660 file system for CD's and/or the creation of a UDF file system for DVD's? I am looking for such a class to incorporate into an applcation that is currently under development, and would rather not have to write our own.
    Thanks.

Maybe you are looking for