Doubts in funda's of XI

Hello Gurus,
I am some doubts in funda's of XI. PLEASE HELP ME BY WRITING YOUR OWN IDEAS ( NOOOOOO! LINKS PLEASE ).
when in SLD .... you have buttons for creation of "new product" and "new software version component" ..... when SLD is set to show all the products/Software version components automatically by SAP.... what is the need of these two buttons?
when my XI server is connected to R/3 systems i am not able to see this product (R/3 system) in SLD .... but i am able to import the IDOC/RFC to XI server.... why is that happening?
Well! it also said by one of our gurus that R/3 systems should be defined in SLD of XI to be seen in SLD of XI... as your basis guy is quite busy to answer ... can some one me help to answer my curiousity?
Cheers!
SY

Hi,
>>>when in SLD .... you have buttons for creation of "new product" and "new software version component" ..... when SLD is set to show all the products/Software version components automatically by SAP.... what is the need of these two buttons?
SLD shows all the products and SWCV of SAP. The button you have specified allow us to create our own software component versions and products.
One of the reasons as to why we create software component versions,is for modularity.
Moreover, each of the namespaces under a SWCV has some commonality.
>>>when my XI server is connected to R/3 systems i am not able to see this product (R/3 system) in SLD .... but i am able to import the IDOC/RFC to XI server.... why is that happening?
You will find an entry for R/3 in the technical system list.
>>>Well! it also said by one of our gurus that R/3 systems should be defined in SLD of XI to be seen in SLD of XI... as your basis guy is quite busy to answer ... can some one me help to answer my curiousity?
Yes! If this is not done, how will xi know where the R/3 system is? You will have to tell xi, that r/3 is at this IP right? This is what you do in SLD.
Regards,
Smitha.

Similar Messages

Error create a software component

I am trying to create a software component in SLD, but I am getting following error.
Unknown reference instance in CIMPropertyReference key property .
I am giving following parameters .
Product : TBIT40_WORKSHOP,1.0 of SAP
Vendor :sap
Name : PRASHANTH
Version: 1.0
can any one please help me create a SWC and also let me know how to create Product in SLD I am new to XI .

Hi Prashanth,
More on -
http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/481955dc9e42c19d5a1bc3b8aead81/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/12/003479fa4c2d4aa9d175dcbb081d66/frameset.htm
doubts in funda's of XI
Hope this helps
Regards,
Moorthy

Commitment item updated wrongly

Hi friends
I have a doubt in funds management budget control suystem
at the time of creating PO - No problem (FM account assignment is providing me correct commitment item and Fundscenter)
Below is the scenario
I have assigned commitment item - "INV" for the inventory FI-GL account and it is populated in PO - correctly
when i do the GRN i get
Inventory account Debited with commitement item "INV" (correctly)
GR/IR account credited with commitemnt item "INV" (wrongly)
for the GR/IR line item I want commitment "GR/IR" to get populated instead of commitment tem "INV"
In the GR/IR GL account I have assigned commitment item "GR/IR"
if so why am I getting commitment item "INV" instead of commitment item "GR/IR"
where is the problem please please can you help me by answering this
P.S
the commitment item "INV" is with 30/3 Combination
the commitment item "GR/IR" is with 40/3 combination
Thank you & Kindest Regards
Srikaanth

Hi, before posting use search, this question discussed.
\You can't substitute CI for GR/IR account during GR, it populate from Dr account(from PO)

Doubt in client's funda

hi,
Can you change another client's data by executing a program in a different client?I want the reasons too.
Thanks,
Gaurav

Hi gaurav
You can do that by creating a RFC ENABLED function Module.
But with reasons only , u can do that. Without any requirement and situation u will not do the customisation in SAP.,
Of course , You can do .If u want, i ll further guide u,
Regards
karthik

ALE funda doubt

hi experts,
First of all let me request you to not answer this question by linking it to some sites or threads.I want its answer written by you in short and brief.
Why ALE is required??
Thanks,
Gaurav

Hi,
ALE allows the user to perform an SAP transaction in the sending system, after which the following steps occur:
1. 1 or more communication IDocs (intermediate documents: container for the application data) are created in the sending system database. An ALE distribution model, that needs to have been configured, determines which systems the IDocs are to be sent
2.These communication IDocs, that contain the relevant application data of the transaction that was performed, are then passed to the ALE communication layer
3. This layer performs an RFC call using the port definition and RFC destination determined through the customer model
4. The IDocs are then transferred to the respective receiving systems. These could be SAP R/3, R/2 or external systems
5. If the receiving system is an SAP system then:
-In the case of master data distribution the same transaction that was performed on the sending system is again performed on the receiving system with the data contained in the IDoc. This allows the data to go through the SAP checks before posting occurs
-In the case of transaction scenarios the relevant data is passed to the respective transactions in order to load the required application document. E.g.. A PO is loaded on the sending side, yet a SO is created on the receiving system
6. Master data has another difference:
-It can be set up in such a way that any changes made to specific fields in master data tables can automatically trigger off the ALE distribution process for that particular master data object
-If a master data object is created or changed on a sending system and distributed to another system the respective transaction is used to either create or change that respective master data object on the receiving system
In general, if standard SAP can't perform the task required then neither can ALE. It doesn't add functionality, it merely decouples it and allows you to distribute it onto other remote systems.
The Detail as described by SAP
In the output processing one of the function modules of the application creates an IDoc, the so-called master IDoc. This IDoc is sent to the ALE layer where the following processing steps are applied:
Outbound processing
Receiver determination
An IDoc is similar to a normal letter in that it has a sender and a receiver. If the receiver has not been explicitly identified by the application, then the ALE layer uses the customer distribution model to help determine the receivers for the message.
The ALE layer can find out from the model whether any distributed systems should receive the message and, if so, then how many. The result may be that one, several or no receivers at all are found.
For each of the distributed systems that have been ascertained to be receiver systems, the data that is specified by the filter objects in the customer distribution model is selected from the master IDoc. This data is then used to fill an IDoc, and the appropriate system is entered as receiver.
Data selection
Segment filtering
Individual segments can be deleted from the IDoc before dispatch by selecting Functions for the IDoc processing -> Settings for filtering in ALE Customizing. The appropriate setting depends on the sending and receiving logical R/3 System.
Field conversion
Receiver-specific field conversions are defined under Functions for the IDoc processing -> Conversions.
General rules can be specified for field conversions; these are important for converting data fields to exchange information between R/2 and R/3 Systems. For example, the field "plant" can be converted from a 2-character field to a 4-character field.
The conversion is done using general EIS conversion tools (Executive Information System).
Version change
SAP ensures that ALE functions between different R/3 System releases. By changing the IDoc format you can convert message types of different R/3 releases. SAP Development use the following rules when converting existing message types:
-Fields may be appended to a segment type;
-Segments can be added;
ALE Customizing keeps a record of which version of each message type is in use for each receiver. The correct version of the communication IDoc is created in the ALE output.
The resulting IDocs (it is possible that several IDocs could be created in the receiver determination) are referred to as communication IDocs and are stored in the database. The dispatch control then decides which of these IDocs should be sent immediately. These are passed to the communications layer and are sent either using the transactional Remote Function Call (RFC) or via file interfaces (e.g. for EDI).
If an error occurs in the ALE layer, the IDoc containing the error is stored and a workflow is created. The ALE administrator can use this workflow to process the error.
Inbound processing
After an IDoc has been successfully transmitted to another system, inbound processing is carried out in the receiver system, involving the following steps in the ALE layer:
Segment filtering
Segment filtering functions the same way in inbound processing as in outbound processing.
Field conversion
Specific field conversions are defined in ALE Customizing.
The conversion itself is performed using general conversion tools from the EIS area (Executive Information System).
Generalized rules can be defined. The ALE implementation guide describes how the conversion rules can be specified.
One set of rules is created for each IDoc segment and rules are defined for each segment field.
The rules for converting data fields from an R/2-specific format to an R/3 format can be defined in this way. An example of this R/2 - R/3 conversion is the conversion of the plant field from a 2 character field to a 4 character field.
Data transfer to the application
Input control
When the IDocs have been written to the database, they can be imported by the receiver application.
IDocs can be passed to the application either immediately on arrival or can follow in batch.
You can post an inbound IDoc in three ways:
1. by calling a function module directly: A function is called that imports the IDoc directly. An error workflow will be started only if an error occurs.
2. by starting a SAP Business Workflow. A workflow is the sequence of steps to post an IDoc.
3. by starting a work item A single step performs the IDoc posting.
The standard inbound processing setting is that ALE calls a function module directly. For information about SAP Business Workflow alternatives refer to the online help for ALE programming.
Regards

BAPI Funda Doubt

hi,
 If i'm developing a BAPI for any composite application which will communicate with .NET/Java application to pass data.Assume this scenario is working fine with fetching data for material 100-200 material.Now in a day i added 10,000 more material in my master.Now the performance may degrade and .net/Java application has to wait for the data to come into its environment and often it will get timeout.So how to deal with these kind of situations or What is the Error Handing Process in these types of scenario.
Thanks,
Gaurav

Hi
U have to use extension structure (EXTENSIONIN)
In the table parameter of the BAPI you can see EXTENSIONIN structurated as BAPIPAREX.
U need to do the following steps before using it:
By SE11:
- Extend the structure BAPE_VBAP and BAPE_VBAPX in order to insert the new fields
- Extend the structure VBAPKOM and VBAPKOMX (if it's necessary) in order to insert the new fields
In your report
- Transfer the value to EXTENSIONIN:
BAPE_VBAP-POSNR = <POSNR>.
BAPE_VBAP-NEW FIELD = .......
EXTENSIONIN-STRUCTURE = 'BAPE_VBAP'.
EXTENSIONIN+30 = BAPE_VBAP.
APPEND EXTENSIONIN.
BAPE_VBAPX-POSNR = <POSNR>.
BAPE_VBAPX-NEW FIELD = 'X'.
EXTENSIONIN-STRUCTURE = 'BAPE_VBAPX'.
EXTENSIONIN+30 = BAPE_VBAPX.
APPEND EXTENSIONIN.
Max

One doubt on CRM Workflow.

Hi All,
I have a clarification to be made.
Below are some requirements from a CRM project. Now we are planning to train some one to handle this part and essentialy his role is on Workflow. Now my doubt is whether this person should take CRM training or workflow training? One thing to note here is that the person does not have any CRM background also. So my question is whether this person needs to take Workflow training or CRM training( I am not sure whether CRM training has workflow in it) or something else(meaning first CRM and then Workflow, since the project is on CRM)?
The requirements are in bold.
1. Ability to define a Customer Program, including, but not limited to:
will adhere to role based security
informational program characteristics
program eligibility rules
technical prerequisites (e.g. equipment)
program specific options (e.g. bill protection)
enrollment related work flow steps and prerequisites
funding accounts
Comments : Standard SAP functionality. May need workflow
2.Ability to automatically enable or disable program functions.
Comments : Workflow or Actions can be used.
3.Ability to generate automated notifications/ticklers when program steps need to be taken.
Comments : Workflow or Actions can be defined to trigger Notification on certain events.
4. Notify appropriate Program Manager if measure factors or incentive rates are changed.
Comments : Need workflow or Actions to trigger this.
5. Associate the completed audits to actual programs and when applicable tie to a programs workflow requirements.
Comments : Link is Standard SAP Functionality and needs to define workflow.
6. Ability to generate customer communications based on triggers such as; dates, changes to customer information, work flow steps, etc.
Comments : Needs to develop workflow or actions to trigger Notifications on pre-defined rules.
7. Based on program, allow for multiple incentives or timed incentives based on workflow process completion steps.
Comments : Need to be configured in Rebate Processing

Thank you,
Regards,
Manesh

Hi,
The steps which u have done al are correct
Find the information below for BWA1,BWA5 and BWA7
BWA1:
1.BW adapter which will give you meta data information and if you want to chnage any settings relatede to mapping or if you want add any BDOC mapping you can do by using this Tcode
2. We c an copy BW adapter data source and we can create custom BW adapter data data source by using copy function
3. We can change the selection conditions for the data source
4. we can bdoc mapping information under mapping tab,if you want to add any new field to map with new bdoc segment ,we have to map here;for ex if you want to extract Extractnal reference number from 0CRM_SRV_PROCESS_H data source
we have to follow below steps
1.enhance Extract structure
2.Add bdoc mapping in BWA1 with perticular BDOC segment for example Sales bdoc segment mapped with Extractnal reference number
3.Add code in Mapping module of data sourc eto fetch data or write code in Badi CRM_BWA_MFLOW to fetch data for newly added fields
BWA5:it will show all activated BW adapter data source information under ACTIVE tab
BWA7: it will have all BW adapter delta enabled data source information,if your data source is not available under BWA7 ,that means you didnt enable delta for the same (not intialized )
Table information:
SMOXAFLD: Field List: Key Attributes for BWA Master Data Delta Queue
for example : DISTR_CHAN, PRODUCT_GUID, SALES_ORG are key fields for data source 0CRM_PRODSL_ATTR
SMOXRELP:BWA: Use of Segments and Fields in DataSources
BDOC segment mapping information fro the data source (which u have used in BWA1 under mapping tab)
SMOXRELP_S: Shadow Table for Table smoxrelp
which will give information about BW selection whether we can use this field for BW selection for data loading iof its marked for selection u can see in rsa3 selections.

Cannot Add Funds PayPal Credit Card

Sony. Is a absolute joke. This issue has been going on for FOUR YEARS for some users. And now. Last month. I brought like 3 games. Then. All of a sudden. Cannot add funds using PayPal. Says credit card invalid. Ah. Yeah right. i have used paypal all this year. But now mysteriously. It doesnt work. I spent the past month a good $1,000 on ebay. With paypal. But now magically sony doesnt take my paypal. So i use credit card. Says card not valid. This is through the webisite on computer. I go to PS4. I try it. Says address not valid or something. Seriously. So for what. Its June. So for six months. I have used PayPal no problem. Now magically sony decides to say not valid. My credit card doesnt expire until 2016. Thats what. 2016. My address is correct. Some users say sony changed things. So you have to put your address exactly like your statement. Dont know if this is true or not But why has it worked for six months. Not now. I love playstation. I have all systems. But I love playstation the best. But guess what. I ended up going onto my xbox one. And buying, pre ordering $500 worth of games. Guess what. My paypal worked straight away. Ironic dont you think. Me and other gamers options is to only buy PSN cards. But ironically. You can only have $150 in your wallet at once. Why. Thats just dumb. Considering games are $100. I was all cashed up this month. As I got some money from my grandfather who past. I was ready to put $1,000 in my wallet. But guess what. Limit to $150. So obviously sony doesnt want our money. But makeing us jump through hoops. This is without a doubt the most unproffesional. Annoying. Frustrating thing ever. And it keeps saying. Address not valid for paypal. You serious. I spent $1,000 on ebay. But now you say my address is wrong. So I guess all these parcels I have been getting from ebay, is wrong address, even though I am getting every single parcel. You know what sony. I am done with you. I dont care if the main reason I turned to sony is the xbox one keeps crashing to dashboard. I dont care if ps4, has better grahpics, controller. you know what. I am going to sell my ps4 on ebay for $1. And be done with sony. I am done with it. And going back to xbox one. Xbox one may have its faults. But at least I can use paypal and a credit card. So what. I am limited to buying $50 PSN cards from ebgames. Thats so much fun. So I want to buy 5 games. So lets see. I have to buy what. Games are $100 in australia. So I have to buy 20 PSN cards. Oh. What fun. Scratching all those cards, putting in all the codes. A hour later. Then finally i can buy games. Which takes me what. A minute to do on xbox one. As paypal, credit card works on xbox one. You think I am just ranting. Go google search. This has been a issue for four years. I am done with sony. This is a joke. Sony is the most unproffesional company ever. You fanboys may live in denial. But its the truth. And dont tell me to check cards, information. What part are you missing. For past six months. Same paypal, same card, worked perfectly. Nothing has changed. The only thing that changes was. I brought three $100 games at once. Now this credit card information invalid crap. You lost so much money out of me this past months sony. I got like $7,000 from my grandfather passing. And guess what. Its now all going to xbox one. How about them apples sony. How about them apples.

I got mine fixed. I emailed support. Took forever many emails, and eventually they fixed it. Basically they said. Some security thing, they stop funds. So they didnt say outright. But basically from what they said is. They have a limit each day on what you can spend in store. Already the PSN wallet has a limit of $150. Thats all you can add. When my account stopped working. I spend like around $300. As I brought 3 games. But one of those games was say $160, as it was like a special edition thing, so I assume if you either spend over the $150, or max $300. It stops. Which is just wrong. So say for example. Three new releases where out today. And we all wanted to buy them. But we cannot. What is it. per day. or do I have to buy one game, wait afew hours, then buy another. The support person didnt say any amount, or what exactly it was, but from just what they where saying, it sounds like they have a limit on what you can spend each day, but they werent allowed to say. I also have a xbox one and Wii U. And its so much easier buy games on Wii U and xbox one systems. Not to mention the headache with the new hard drive update with the Nyko Data Bank on PS4, i updated, and cannot use rest mode, and cannot play disc games, thanks sony, i upraded to a 4TB hard drive, but now i cannot play discs, or rest mode. Why cant you be just like Wii U and Xbox ONe and use external hard drives. Xbox one lets you use upto 16TB, SO yeah. I eventually got it fixed. I was going to buy all my multi platform games on ps4, and only exclusives on xbox one, but you know what, from now on, I am buying all my multi platform games on xbox one, and Only buying exclusives on ps4, Dont get me wrong. I am not a fanboy. And there are things I dont like about xbox one, or wii u. You cannot use a USB headset on them, but you can with PS4, as I use the Kraken USB headset on ps4, But apart from that. Xbox One controller is better, the ps4 is to noisy, and other above reasons, And not only that. I am in Australia. And out internet, i can download on xbox one, 3GB a hour, which is around the same speed i get on PC Steam, on ps4, i am lucky to downoad 1GB a hour.

Down payment in fund management

Hi,
When i am posting a down payment in reference to purchase order, budget is carried back by system automatically which was committed at the time of creation of Purchase Order. It may lead to actual procurement exceeding the budget as budget is reduces.
For example:
Purchase Order created - 100 USD (Budget is committed by 100 USD)
Down payment created against PO - 100 USD (Budget commited by purchase order is carried back automatically)
It means another PO can be created for for 100 USD till the time down payment is not cleared.
Can anybody guide me to stop reversal of budget commitment at down payment.
Further, standard update profile 350 is used where down payment & down payment request are marked as 'Statistical Update'. SAP version is ECC 604.
Thanks
Manish

Hi Mar,
I had seen this SAP note before posting thread.
I have some doubts in regard to implementing above note which are as follows:
1. In update profile Down payment request & Down payment is marked for statistical update then why it is impacting funds
2. SAP Note says that it is a modification & SAP will withdraw support after implementation of note. What are the changes take place once note is implemented:
      a. Whether I would not be able to make down payment against purchase order line item?
      b. If i can not make payment then this note is of no use as i want to track down payment against purchase order.
      c. If i can make the down payment against purchase order, will it not impact purchase order history?
                                                                                OR
      d. this change will only impact fund management & down payment document will not impact fund management
Thanks

Doubts in FI/CO

Hello Experts,
I have some doubts in Treasury of FICO. Can some one explain me clearly.
1) What are the topics that come under Treasury?
2) What is Value Date in Cash Position?
3) What is Memo Records in Cash Position?
4) What is Check Deposit in Cash Management and how is it different from Lockbox?
Points will be awarded definitely........
Regards,
Sriram

Hi:
The topics in Treasury are
Cash Management
Cash Budget Management
Market Data Management
The cash position provides bank balances by value date (bank transaction date), cash position covering the next few days, and control over outstanding (open item) checks.
As manual memo records are usually created during preparation of the liquidity status as a parallel or supplementary activity, this flow uses the liquidity analysis started in the previous section as a starting point for the creation of the memo record. Within the liquidity display you can branch at any time to memo record maintenance, regardless of the summarization level
In Cash Management Check Deposit explains how you determine the average period outstanding on your checks for each outgoing checks account and for each vendor by means of the outgoing checks account and report programs RFSRUE00 and RFSRUE10.
The basic operation of a lockbox system is fundamental to large businesses but is almost transparent to those without some knowledge of corporate treasury operations. The objective of a lockbox operation is to have the customer remit a payment check to a local post office box to minimize mail transit time. The checks are processed by the bank on a daily basis and the funds collected are usable by the receiving business much quicker than with the traditional process. The illustration below shows the basic operation of the lockbox and how SAP fits in.
Please let me know if you need more information.
Assign points if useful.
Regards
Sridhar M

Fund Flow & cash Flow

hi...
whr we can get Fund Flow & cash Flow in system?
Thanks & Regards
Rekha sharma

Hello,
There is no report that is directly gives you cash flow statement with reference to your requirement. The accounts in your chart of account would be different and the requirements are ever changings for organization to organization.
You have to design a FORM in FSI4. If you have any doubt, then see some reference forms available in FSI6. You should bring these values as FS Items into the FORM from your Financial Statement Version (FSV) which you must have already been created in OB58
Once you have created the form in FSI4, then assign this form to the report in FSI1.
Thanks,
Ravi

Doubt between N91 and 3250

Does 3250 themes fit into N91?
3250 has more size in the display... I mean four icon lines while N91 only displays 3 like oldest S60 (6600, 7610, 6681)...
And the principal doubt is if can use 3250 themes with perfect function in the N91 while it has a different music player design...
What happens there???
cuz the only themes I fund for S60 V3 are oldest themes upgrade to this symbian version or themes made for the 3250...

YOu can use the same themes, the icon size shouldn't make a difference.
But it depends on the Theme. Some Themes contain icons while others don't. The icons will be streched or reduced to match what the display has.
Hope this helps
640K Should be enough for everybody
El_Loco Nokia Video Blog

Is Encumbrance Accounting Mandatory for Budgetary Control to Perform Funds

Dear All,
I have a doubt in Project Management Module.
Is Encumbrance Accounting Mandatory for Budgetary Control to Perform Funds Check in Non Integrated Budget?( There is no integration between GL Budget and PA Budget)
Thank you.
Rajasekhar Itha

Hi,
If you are using your project budgets, you will not need many integration steps.
IF you have a budget integrated, then use that account as charge account when you are creating a PO, if budget is not available for that account or it is not a budget account then system will check for budget at project level.
You can have stand alone budget just for projects without any integration to GL budget and you can still achieve budgetary controls.
Let me know if you need more help.
Mubarak
[email protected]

Doubt about SAP XI standard Demo.

Hi All,
I am running through SAP XI standard Demo.
When I am creating Container for the receiver I don't find any container type available to select. Where to define this container type. In demo the container type MultipleBookingOrderRequest_Abstract is given. but I don't find it when click on the Type field. Your Help wud be greatful. Please find the tutorial link below for your reference.
http://help.sap.com/saphelp_nw70/helpdata/en/66/64104221ef5133e10000000a155106/frameset.htm
Cheers,
Senthil

Hi,
S, you can but should be gud in fundas. Ofcourse, tutorials willl help you to pick the design skills, plz chck the following threads for basic docus:
Check out this thread for basic doubts.
Re: Newbie - WebDynpro Java
check out this pdf for complete webdynpro tutorial.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ba2db0e5-0601-0010-9790-e271902f2c38
The below link will take you to webdynpro sample applications and tutorials.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d
regards

Funds Management-Derive Fund centre from Cost Centre

Dear Guru
In funds management -Derive Fund centre from Cost Centre" i used to have 8000 entries till yesterday. So there were 8000 combinations of fund center with cost center.
Somehow I can only see 80 today. Somebody might have deleted those.
Is there any change log availble to see who deleted and when?
Archit

Hi,
I see... Deletion is not logged there, I'm afraid; only modifications on existing entries. Unless, you have specifically defined log status for the relevant FM table, which I doubt. I believe, no one would delete 8000 records just for laugh. Most probable, the entries were deleted with a transport request.
One more reason to follow my advice and maintain the link in a different manner.
Regards,
Eli

Doubts in funda's of XI

Similar Messages

Maybe you are looking for