Doubts vcore and vcore aux in barton and volt in general

Hello people (sorry, I speak spanish, not english)
I have in the bios core in 1,65v and in windows they give me the programs 1,67 or 1,68. the auxiliary vcore gives me 0,05 at 0,1v more than the vcore.
another topic is that the other tensions vary and they differ if I read them in the bios or in windows.
in bios they are normal and almost almost ideal or with less than 0.5% of the ideal.
in windows they are not correct. or yes they are correct. that is my doubt
12v >> 11,65 up to 11,99v
5v >> 4,85 up to 5,15
3,3v >> 3,29v up to 3,31
-12 >> -11,90 up to -12,20
-5 >> -4,95 up to -5,20
5vsb> 4,5 up to 5,5 depend on the program
vcore 1,65v >> 1,67 up to 1,68
auxiliary vcore 1,70 up to 1,80
the topic is that the voltages doesn't vary if I make overclock, but yes, when it changes the ambient temperature.
I have power supply of 350w (150w in 5v and 3,3v)
the connector aux of 12v this connected one
I worry about auxiliary vcore that if I want to ascend more the micro, this leaves too high. if I go up the vcore up to 1,7 the auxiliary vcore goes up to 1,85. and this scares me.
is this normal or where this the problem?
thank you
msi k7n2 delta L
xp 2600+ @ 2200 (200x11)1.65V
40ºplaca 50ºmicro a full volcano11+ chaser
256+256 generic pc 400 cas2.5
Ati 9600pro 256MB
live 5.1
cdrw lg 52x
dvd pioner 106 16x
80GB hitachi, 30gb hitachi
aoc 19" aoc 15"
a4tech wop35, genius net+optico
lt winmodem
lifeview 3000

Quote
I have power supply of 350w (150w in 5v and 3,3v)
recommended is 200w for 3.3v and 5v combined.
Quote
12v >> 11,65 up to 11,99v
5v >> 4,85 up to 5,15
3,3v >> 3,29v up to 3,31
-12 >> -11,90 up to -12,20
-5 >> -4,95 up to -5,20
5vsb> 4,5 up to 5,5 depend on the program
vcore 1,65v >> 1,67 up to 1,68
auxiliary vcore 1,70 up to 1,80
looks fine to me.
10% up and down is acceptable on 12v line.
5% up and down is acceptable on the 3.3v and 5v line.

Similar Messages

Im new to the iCloud and Mac in general. After experincing a hard drive crash out of the blue, I lost everything. I want to make sure this doesn't happen again. I show backups for my iPhone and my daughter's iPod but my mac doesn't exist. How do I fix tho

I'm new to the iCloud and Mac in general. After experiencing a hard drive that went out of the blue, I lost everything. I wanted to use the icloud to back my documents up. I went into the iCloud under settings but it only shows my iPhone and daughter's iPod. How do I get my Mac to back up too? Is there something I need to use to have the documents back up?

You cannot back up your Mac to iCloud. Even backing the whole thing up to another online service would be dubious because it would take a very long time. You should buy an external hard disk and back up to that - even better, buy two and use one to make a Time Machine backup and the other to clone your Mac from time to time, thus giving you a backup from which you can boot in an emergency.
If you wanted to back up a suitably sized selection of data to an online service there are a number of third-party methods available, some of which are examined here:
http://rfwilmut.net/missing3

After upgrading to IOS 5.1 I no longer can see Verizon at the top of my Iphone and under settings general Network says Not Available Why is this? Did the upgrade cause this?

after upgrading to IOS 5.1 I no longer can see Verizon at the top of my Iphone and under settings>general>Network>says Not Available Why is this? Did the upgrade cause this?
steve

See this tip --> http://support.apple.com/kb/TS1559
If this doesn't resolve it you most likely have a hardware failure. Fortunately, your phone is in warranty, so if you take it to an Apple store they will replace it.

Disappointed in CS6 and Adobe in general

I am more and more disappointed in CS6 and Adobe in general. I no longer have any respect for Adobe or their products.
I can't read the new title editing function in Premiere CS6 (it was fine in CS5). Somebody here said you can make it bigger: No you can't. You can make the box bigger like a picture frame around the edit, but the text is still unchanged and unreadable. Soundbooth was usable as a wave editor, Audition is not. Installed on an AMD machine, Premiere Pro CS6 imports Nikon video as audio and after more than a month of playing with it Adobe's India supper support still doesn't have a clue.
Dreamweaver CS5 Ste files won't fully import into CS3 or CS5 (it can't read the FTP user/pass), my install of Encore CS6 is missing all the menu templates and buttons so I go back to CS5, and I was totally disappointed that CS6 won't edit in 3D. The After Effects work around for 3D is a joke.
The Master Collection download install file is just a little too large to fit a backup on any DVD. How inconvenient! The first one kept asking for "Disk 2 - English/Japan". It would be nice if they got it right before releasing it to the public.
Finally frustrated with the idiocy of Adobe, I bought Grass Valley Edius 6.5. When I called GV for a minor issue I got an office in the USA on the second ring and a quick, correct answer. Everybody there speaks clear English. The Edius product simply works (it's been a broadcast news editoring standard for years) and I can also edit 3D. I can actually see titles when I'm editing them. It imports any file I want correctly, including the Nikon files that Premiere CS6 can't. It has all the functions that Premiere does, including good stabilization, and a few that Premiere does not.
And Grass Valley Edius is a product from Japan!
Wake up Adobe, your ship is sinking fast into the Indian Sea and I'm sailing in the other direction.

I had another adventure today. Learning from this forum that the menus and buttons missing from Encore CS6 were in a "missing items" update, I downloaded and installed the update only to find there were still no backgrounds, no buttons and only a few "menus". So I contacted Adobe Chat Support. I was put in contact with Rahul.
I filled in form indicating that the missing files update did not contain very many missing files.
Rahul asked what the error message was.
I said there was no error, that Encore CS6 after installing the update still contained no backgrounds or buttons.
Rahul asked for the serial number. I provided it.
Then Rahul asked what the error message was.
Rahul is not paying attention.
3 cents per hour would be overpayed for Rahul.
Rahul is not unlike all the others I've encounter with Adobe's outsourced support. They don't pay attention. They simply don't understand plain English. They are robots.
Adobe is not saving anything by hiring people who act like robots and accomplish nothing. They are only alienating customers. (Double meaning on the word "alienating")
Two other "Rahuls" wasted hours doing the same things over and over by remote into my computer trying to figure out the AVI files that came up as audio only, and they solved nothing.

Hi, I have selected earse content and settings in general settings, after that my iphone displays apple symbol only. Did i spoil my iphone?

Hi, I have selected earse content and settings in general settings, after that my iphone displays
apple symbol only. Did i spoil my iphone?

It takes a very long time, depending on the size 8,16,32GB?
it can take over a few hours.
if it doesn't work over 24hrs connect it to a computer using itunes, and choose update, it'll update it with the newest firmware.

" SYSTEM ERROR" with ERROR CATEGORY: Message and ERROR ID : GENERAL

HI all
I m doing JDBC -> XI -> SOAP -> XI -> FILE ( XML) scenario .I have implemented it using BPM .
But ,In MONI , i am getting a "SYSTEM ERROR " with "ERROR CATEGORY : MESSAGE" and "ERROR ID : GENERAL" .and
One thing more is there my all adapters are active (JDBC,FILE) in runtime workbench but SOAP adapters i am not able to see it there as its services are not defined in there .Is this problem is because SOAP adapters are not defined in runtime workbench ?

Hi Colin
I are using SP 3.0
I have checked the Communication channel monitoring and Adapter monitering also but in mine case when i want to see the SOAP adapter in adapter monitoring , the SOAP ICON is disabled there ,so i am not able to see whats the status of my SOAP adapter i have used in my scenario
Thanks and Regards
Abhishek

HT4972 I can't update my iPad to iso 5 please help. When I go to settings and then to general it doesn't have an update button for "check for updates". Thanks

I can't update my iPad to iso 5 please help. When I go to settings and then to general it doesn't have an update button for "check for updates". Thanks

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

My friends has found he has, since 2006, accumulated multiple apple ids. he's very concerned about icloud security and security in general, having his pc hacked repeatedly. how can he permanently delete the extra, apple ids, please?

my friend has found he has, since 2006, accumulated multiple apple ids. he's very concerned about icloud security – and security in general, having had his pc hacked repeatedly. how can he permanently delete the extra, apple ids, please? Thanks.

Hello, windypinesands.
Thank you for visiting Apple Support Communities.
If your friend is concerned with the security of his Apple ID or iCloud account, I would recommend reaching out to our Apple ID Account Security team to assist him with this issue.
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H.

HT4623 I am trying to update my iPad 1 to iso5. And in the generals settings it does not say software update. Can you help?

I am trying to update my iPad and under my general settings there is nothing that states software update. Can someone tell me how to do this.

If you are on a version earlier thatn 5, you will not see that option. It was introduced in 5. To updare from 4x.x or earlier, you will need to connect to a computer running a current version of iTunes: http://support.apple.com/kb/HT4972

Having problems setting up HD voice and VoLTE on Galaxy 5

Cant set up HD voice. Can't see VoLTE option.

Add the feature advanced calling 1.0 online then power cycle your device and volte will show

HT4623 How can I up date my iPhone, when you go into settings and click on general there should pop up a thing that says update between about and usage it does not have it and I can't update it now

How can I update my iPhone,when I go into settings and click on general something should pop up between usage and about that says up but it does not and my iPhone needs to be updated.

If you don't have the update option on your phone, you will need to update in iTunes on your computer.

Wots the deualt vcore fot the barton 3000+

i have stopped using an oc and set every thing back to default.
i have noticed that my vcore is now 1.850 im pretty sure on my old board it was 1.65 or somthing lower than 1.85 wots up with this.
i never actually checked the defualt core on this board any one else have this problem wot would have caused it if its not a bios fault.
it says 1.85 vcore in bios hardware monitor and in core center
when are they going to fix the bios for this crap delta2 board.

Quote
Originally posted by NINJMNKY
The default voltage for the barton 3000+ 333FSB is 1.65
unless you're overclocking, you really don't need anything higher than that.
[as a sidenote; my XPM 2600+ can pull 3200+ 400FSB at 1.45v, but ze crappy delta2-lsr mobo don't let me set the volts that low ]
Go in PC health in bios and check, my bet is your not running 1.45v since the board does not go that low it will overvolt it to the lowest setting. My guess is its running around 1.55v.
I got my mobile 200X11.5 at 1.625v

Doubts SR1 and SR2

Hi to everyone:
Well I'm new in SAP Solution Manager, and I want if someone can help me with a doubt I have. Well my doubt is what is the difference between the Solution Manager 4.0 SR1 and Solution Manager 4.0 SR2.
Also someone can give me a link to understand the Solution Manager.
Thanks

The difference between SR1 and SR2 is the support package level that comes with installation. If you use SR2 you will be on SP9, if you install SR1 you will be on SP 6 thus you will need to apply more service packs.
Markus

865 Neo2 platinum + Prescott and volts

Hey i just got this board because I thought I killed my Abit IS7.. but was actually the 2.4C
Anyways im cheap right now, and was thinking about picking up a 2.4A for 125 @ newegg
I heard that MSI boards and prescotts locks you out of vcore changes? i really need to be able to change because i will be running it at about -40c. If it is locked , is there a bios modder who knows of a bios that lets you change vcore? graci

Peen, Once you get a load of the temps:angryfire: that a prescott produces I think you might change your mind about upping the V Core.
Do you plan on using Water or Air?
Good Luck
Dave

Sky Sports 1 and 2 and BT in general - Absolutely ...

I would like to start by stating this will be a bit of an essay but I hope anyone who opens this thread up takes the time and consideration to read and takes it on-board, I am particurlarly aiming that at prospective BT customers who may be here to consider taking up a contract with BT, I strongly urge you to NOT DO THIS and to use my experience as the leading reason why.
We have been BT customers since we moved into our current property back in 2003, we have the current full package on offer, BT Infinity, with the Sky Sports and ESPN upgrades and the full On Demand and Broadband services. We have experienced numerous problems over the past three to four years with connectivity issues. The broadband drops in and out all the time, it's hard to put a level of consistency on this but on some days it can drop out 25-30 times, it can happen a lot at the weekend some weeks or weekdays on the others or both, the timing varies, it doesn't appear to be reflective of particurlar weather conditions, not that this should really matter anyway but we've been investigating all possible lines of enquiry as to why the problems keep happening, by my calculation we've had 18 engineers out to visit the property, I myself, and this does not include the other numerous phone calls made by fellow family members, have called and reported the problem to BT at least 50 times in this time period, I've taken days off work to wait for engineers, I've unplugged and reset my hub more times than I care to remember, we've had the hub itself replaced four times, the Vision box replaced twice, the lines re-routed through our house twice and more e-mails and letters than I reckon President Barack Obama sends in one year in office!
And so far, to date, and I am talking about in the last five days, the problem still exists! The only way to get the connection back is to turn the hub off and back on again, or use the reset button, which we all know disrupts the hub and often results in further faults down the line, I would love to not have to do this but given we're paying for 24/7 internet access I should not have to sit around waiting, in most cases, up to 3-4 hours for the signal to return to the hub by itself (I know, I've timed it, something else I've wated much of my own time doing). The lights don't flash or change colour on the hub either when this problem occurs (the hub should register lack of connection, with the lights going from blue to either flashing blue or, in most cases, red, just for the record they stay blue but we have used various devices in this house ranging from state-of-the-art, brand-new laptops to tablets to i-phones to desktops and the problem occurs the same for everyone so before I get one of the many excuses I've already had from BT that it's a potential "device problem" you can forget that one, been there, done that!).
I have urged, and urged, and urged the engineers, the people I speak to one the phone, the personal advisors our case has been passed on too, to look at potential problems outside our property i.e. the exchange. This has been rebuffed time and time again. "It's not the problem sir, the problem is here sir, the problem is not our fault sir" etc. etc. etc. Well, guess what....
We've just received a phone call informing us that, from June 10th in our area, due to issues with the exchange being able to hold the signal, Sky Sports 1 and Sky Sports 2 will no longer be avaliable on our BT package. As huge cricket fans, from a personal perspective, first off, this is infuriating. The person we spoke too also claimed Sky have "pulled the plug" on the package so, also, I'm a little confused as too which is the actual issue here resulting in the loss of Sky Sports? That you've known all along that there has been problem in my local area with the exchange and the signal it can hold, or that Sky have pulled the rights to their sports package? Or perhaps that you spent £757 million recently on a new TV rights package for Premiership football for two new BT Sports channels (those ones you see currently advertised, on, of all channels, Sky Sports 1 and 2!) and actually are just quite happy to cut customers out who have lined your pockets with substantial monthly fees for programming you knew full well didn't work when you first signed contracts with Sky to pick it up, and then distributed to customers? Are you seriously telling me after, by my calculation, three years, you didn't know Sky Sports 1 and 2 didn't work in my local area, yet carried on debiting bank accounts, advertising the channels, supplying them and then, now, with less than a month's notice, you've pulled the plug? That takes me right back to the title of my message - absolutely disgraceful.
I should make it clear at this point we have experienced problems with BT Vision too, albeit not lately, thank God, although that is not to say the problems wouldn't return. Signal dropping in and out, screen crackling and dropping out, black screens frequently on SS1, SS2 and ESPN etc. As for the On Demand service, that is obviously effected by the hub signal dropping in and out, the Vision box also does not appear to correlate with the hub when the signal returns and remains offline for a further amount of time, even when it is disconnected and then reconnected. It is constantly buffering too when the signal is low. Also, one other, far more minor point, you've been advertising 'red button coming soon' now for about three months!? I don't know what your definition of 'coming soon' is, but it's not the same as mine I can assure you, and I'm willing to bet quite a few others too!
Can you give me a good reason why I shouldn't report you too Trading Standards for misleading and false advertising? For 3 years you've been selling us a Sky Sports package you know full well won't work properly in our local area, I don't blame you for Sky's monpoly on sport, but perhaps you can explain to me why you've given two answers that completely contradict each other to the future dealings with Sky Sports in our local area? Why have you not addressed the issues with the exchange for our connectivity problems, despite the fact your now claiming it is what is probably attributed to causing our issues with the two sports channels? Also, I have worked in customer service jobs and I know people wind the heck out of you on some days, but a significant portion of your "customer advisors" are rude and ignorant. You ring the freephone number, your on hold for half-a-century, you get put through to the call-centre in Bombay and you are treated with contempt, I actually feel sorry for the people who work out there, they are clearly reading from a script and lack in clear English Language skills, which is not their fault, it's yours. As for anyone who takes dispute with that, go and ask them a question next time like "how is your day?" They won't answer, they can't, it's not on their call sheet. The few I have dealt with who have clear use of the language are, as I said, rude and ignorant, often accusing me, quite clearly, of lying and of having not reported the problem, for me then to find out a later date when I speak to the technical deparment and to BT Openreach (and yes, I know they are two seperate companies) that date is not transferred correctly between the two which is why whoever you speak too in the call-centre usually only has a last referral point for you from some years ago, it's also quite clearly a deflection manouvre to keep you away from actually getting your problem resolved, paying Openreach to dispatch engineers if required and so you don't clog up the minimal amount of contactable phone numbers for the average customer that are based in the UK.
Failure to receive a suitable and acceptable answer to my queries will result in me having no other option but to consider taking the matter further, I am also inclined now to make it my work between now and the date of June 10th to persuade everyone I know and they know to stay as far away from your company as possible and the "services" you claim to provide.
Also, as huge cricket, and for that matter, NFL fans, maybe you should consider that many sports-viewers in this country aren't just about football. Yes I know that's where the money lies but there is profit to be made from other sports ventures too, I don't think you realize just how many fans you are leaving out in the cold over this move, the whole reason we, and we are just one example, subscribed to the Sky Sports package was for the cricket, and for the NFL. Two sports that are entirely monopolized by Sky, yes I realize, as I state earlier, that's not your fault, but why don't you show a bit of interest in them then? Why don't you be slightly different, you have over £700 million to spend on Premiership football but little else? If you want to attract more customers and build larger profit margins, you have to be more diverse and explore new options and directions to do this.
I'm sure some will say, "why not get Sky?" Well unfortunately we can't due to our location but at least Sky were up-front and honest enough to tell us this when they first came to do a consultation, one, that by the way, we had as a secondary option to BT due to the attractions of the On Demand package, that then wasn't offered by Sky. How sad it's come too this and what an awful way to treat loyal customers who have upgraded to the packages you have offered in all innocence to obtain a better and more fruitful service? Customers who have never been late with payments either and used the likes of the Box office service for both movies and music (when the latter was chargable) as well, the money you have had off us, and that is what we've received in return and yet, perhaps, the poorest reflection on us, is we have stuck it for so long, but we are at the end of our tethers now and utterly furious at the decisions we've learned today that I am going to ensure we get to the bottom of this.
Thank you for taking the time to read, what I appreciate, is a lengthy message. I didn't want to have to write this but it was the only way of making our problems and feelings clear, and I wanted to include everything so as not too mislead anyone myself.

Sadly as this is customer to customer forum you are only talking to fellow customers.
Perhaps it would be better to contact the Mods who are the only BT employees here,
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

Doubts vcore and vcore aux in barton and volt in general

Similar Messages

Maybe you are looking for