Down payment at PO level without line item

Dear All
At the moment when we post down payment request and confirm down payment F-47 and F-48. The system will ask for PO number with line item no.
In practical situation we pay down payment against a PO and not against each line item in PO. e.g. If we have a PO with 20 line item and require 20% down payment according to current standard setup we have to process F-47 for each of these line items which is not desired.
Therefore is it possible to customize the system to post down payment against PO and not at line item level.
It is possible to post F-47 for vendor without referring to PO at all and only refer vendor but we need to refer PO -for reporting and PO status update purposes- just not at line item level.
Any advise?
Regards
Anant

without PO it is not possible to process F-47.
you can not make PO with line items. At least one line item should be maintined

Similar Messages

  • Clearing document without line items

    Hello,
    While doing automatic/manual clearing, clearing doc gets posted with zero line items. We have requirement that documents without any line item can not appear in the legal books.
    Apart from validation/substitution, is there any way to avoid this ?

    Hello Mauri,
    Thanks for your answer.
    Problem is not how clearing rules/lines work but is there any solution in SAP to stop a clearing document being created without line items.
    For eg - while doing clearing,  FX gain/loss line item arises with zero amount in local currency. I know this is standard behaviour & also correct one, but, the requirement is that such zero lines can not appear in the legal books.
    Do you have any solution ?
    Thanks in Advance.
    Regards,
    Amol

  • Cancel down payment Invoice and accounting document without lines item

    Dear masters,
    I have a problem with down payment invoice cancel. As you know when doing invoice down payment request, after release to accounting, the accounting doc will have special G/L indicator is F (noted item). And when I cancel this billing down payment and after release to accounting, the accounting doc of cancel invoice will not have any lines item. Now I want to have lines item for cancel down payment, how can I do that? I really appreciate your support!
    Regards,
    Nguyen Pham.

    Dear Nguyen,
    As i understand your process you created Downpayment Request from SD.
    Then created Downpayment with reference to that request.
    Then you generated Billing invoice and released to accounts.
    After that you cleared the downpayment with the Billing document.
    Now you want to cancel all this.
    First cancel the downpayment by FBRA reset and reverse.
    Then cancel the billing document.

  • IDOC(ORDERS05) - Pass payment method on sales order line item level

    Hi
    We have requirement here to pass payment type(VBKD-ZLSCH) on each line item of the sales order from IDOC. But, IDOC structrure ORDERS05 doesn't have provision to handle this data. Is there any other way to pass this information, except extending the IDOC and handling in the user exit(002) for the same. Please advice.
    thank you very much in advance.
    Thanks
    Lakshman

    I was able to fill the event container creating a new FM based on the template FB SWE_CD_TEMPLATE_CONTAINER_FB_2.  At that point, you have access to all of the Change Document information (i.e. CDHDR and CDPOS).  I was able to take the line item affected and set the Event parameter for line item and then pass it through my workflow. 
    As I was testing I realized that if I made multiple line item changes, they are tagged with the same Change document number during the same update in the sales order.  As a result, I had to make the Event parameter a multiline parameter.  Now I was trying to set the Event parameter, but I think I was using the Methods SWC_SET_ELEMENT for the multiline parameter.  It wasn't setting it properly.  I think I need to use SWC_SET_TABLE and pass it the whole table. 
    I will let you know if this works.

  • Incoming Payment - Posting more than 999 line items through EDI

    Hi guys,
    I having following issues.
    1. incoming 820 is not posting into customer a/c even I configured processing - REMC but creating payment advice
    2. once i tried to process payment advice by using f-28 it is posting in to custmer a/c without payment advice ref. also the payment advice still exist in the system.
    3. trying to post payment advice having more than 999 items by using f-28 system shows error after 999 items.
    4. I tried to process payment advice executing through RFAVIS40 error displays "Payment advice note in Customizing not defined for posting"
    I appreciate if some one guide me to solve above.
    Thanks,
    RK
    Message was edited by: RK Talabathula

    Hi RK,
    Pt 3: There is an SAP Notes on this issue 117708 ,
    also refer Re: F-44 - Clearing of more than 999 line items
    Pt 4: Check OSS note 17449 see for "Payment
    advice upon form overflow"
    hope this helps.
    Please assign points as way to say thanks
    Ravi Rana

  • A/P Down Payment Invoice -With or Without Payment Duty

    Hi All,
    i am trying to add a A/P Down payment Invoice based on a purchase order.when a Excisable item is used in the down payment can be only made without payment of duty and the non-excisable item is used down payment can be can be made with / without duty.can any one explain the scenario of this things..
    Thanx

    Hi Rahul,
    can i made a A/P Down Payment with duty ..??
    what will be the exact scenario for with payment and Without payment duty.!
    Thanks

  • Customer as Vendor --while making payment f110 how to deduct line item wise

    Dear all ,
    My Requirement like this please help me come out this issue.
    we have 5 company code , we have created customer as a vendor.In one company code ,for eg(10000 is a customer and mean time same as Customer as  Vendor(10000) in another company code.
    Now we have raised customer invoice ,
    For eg   10000 for fertilizer.
                  10000 for Drip irrigation
                  20000  some loan.
    These transaction incurred in one company code.
    In other company code these customer as a vendor ,
    Here we have enter Vendor invoice,
    For ex Invoice amount is 70000.
    while making payment i want to deduct this amount from customer invoice amount.
    like in 10000 for Fertilizer in that ,I want to deduct partial  amount in line item level  for different purpose.
    How to deduct this amount .and how to map this scenario in the system.
    Please guide me come out of this issue.
    Thanks in advance
    Regards
    Girish.

    Hi
    vendor and same as a customer functionally is possible with in one company code.  in that case you will be able to clear the customer open items when you are doing the vendor payment.  
    but in my knowledge this functionally is not possible with other company codes. as per your query you are maintained the vendor in one company code and customer in another company code.  you want to clear the line items with one transaction in F110.
    i think its not possible.  becuase payments and receivables are with in company code.  
    Regards
    Ram

  • Down Payment Clearing Document shows as open item

    Hi,
    I made an Down Payment Request (f-47) for $ 1000; made a Down Payment on that request (f110) for $1000; posted an invoice (fb60) with $ 1000; cleared the down payment and invoice (f-54) for $1000.
    Now in vendor open item s(fbl1n), both invoice (KR) and the clearing document (KA) are shown, while in cleared items, the down payment request (KA), down payment (KZ) and the clearing document (KA) are shown.
    My questions:
    1) Why the invoice and the clearing document are shown as open items?
    2) Why the clearing document is shown as both open item and cleared item?
    Thanks in advance
    Edited by: Ming Cao on Mar 1, 2010 7:21 PM
    Edited by: Ming Cao on Mar 1, 2010 7:23 PM
    Edited by: Ming Cao on Mar 1, 2010 7:24 PM
    Edited by: Ming Cao on Mar 1, 2010 11:27 PM

    Dear,
    Do not worry this is standard behavoiur by the system..see the below flow...
    1. Create down payment request - F-47. (Open)
    2. Create downpayment from the request F-48. (Down payment is open)
    3. Clear downpayment F-54. (Invoice and payment are open in normal items and Downpayment and requests are cleared. So downpayment came to normal items.
    You will need to clear these items manually...
    Regards,
    Chintan Joshi

  • Payment method in GL account line item

    Hi Sapients,
    In my HR master, vendor account and payroll result the payment method is dispalyed and its is right.
    But when after posting, in GL account line item its not showing the payment method.
    Kindly help to resolve it

    Hi
    Depending on the GL Account Assignment of the Two GL Accounts, you need to check the copy controls in VTFA
    Regards
    Sanil

  • F110 PAYMENT RUN NOT PICKING UP LINE ITEMS

    Hi Everyone,
    We use the APP functionality to pay customers credit memo. so when running F110, we indicate the credit memo document number in the further selection criteria in F110. It has always been working fine, but some customer that we have paid before, we ran F110 and it cleared some documents but did not clear the others. The line item is sitting in the customers account correctly and the payment terms is the one we have always used (2% 15 days net 30days).
    What do you think i can check againg

    hi Adeola,
    See for running the F110 the payment must be overdue then only can able to run the APP run.
    As you have mentioned in ur seetings only that the payment terms is set for 30 days.
    As this payments is not yet overdue.
    If you Run after 30 days then you can run the Payment run.
    Please let me know, is this helpfull to u.....
    Regards
    Ranjit

  • Payment block R in vendor line item..

    Hi Gurus,
    I am basically a FICO consultant.My client has an issue in running the automatic payment program.For some vendors, in the line item the payment block R is assigned.Now I just want to find out the reason of this payment block.They usually do the ERS through MRRL.So there is no reason of quantity and price difference betwen the gr and the inv. But why still this block R? Is there any good way to remove this block so that the payment can be done through the APP?Points will be given to the good answers?At least please give me some clues why this block is assigned I mean the reason.
    Thanks/Regards
    Debabrat

    Payment block R can come for various reasons like delivery schedule,terms of payment,quality reasons etc.
    Use
    You can block an invoice manually. You have two options for doing this when you enter the invoice:
    You can block an invoice by entering an R in the field Payment block in the document header data.
    You can block an item by selecting the M (manual blocking reason) field in the item list. When you post the invoice, the system automatically sets an R in the field Payment block in the vendor line of the accounting document. Manually blocked items are given the blocking reason Manual block (M).
    the best way to remove the block is to run MRBR transaction
    regards,
    indranil

  • About making a down payment using F-51(without posting through F-48)

    Hi Friends,
    There are situations where the client has to make a down payment against a P.O. (even before the invoice is recieved).
    Then the normal process is to make a down payment using F-48 with a spl. GL indicator, in this process if there is TDS deducted as well.
    Then they have to transfer the SPL GL to normal GL before making a full payment using F-54
    Now the client feels that this is a tedious process to transfer from SPL GL to normal and then make payments, because they say they have quite a few transactions and so to keep a track of which transaction to reverse and which one not to, at the time of making complete payment.
    So, Is it advisable to tell them to post the transaction for down payment using F-51 (If TDS is not required to be duducted)and as and when they get the invoice post the same using F-43, and while making a payment, can we ask them to post the remaining amount.
    Is it inevitable to post the transaction in F-54, if there is a TDS that is deducted, or is there a work around solution for this.
    Please clarify
    regards
    soujanya

    Dear Soujanya,
    There is no need to transfer the amount from the special gl to the normal gl each time. The user can at the time of making the final payment in F-58 or F-53, in the "Paid items" area can also give the special GL indicator say "A". Now when he clicks on the "Process open items", the invoice and the advance both appear. He can select both and the net of them can be paid.
    Assign points if useful
    regards
    Venkatesh

  • Reversed Note Item(Down Payment) but still appear as open item

    Hello experts,
    we were having trouble with reversed down payment.
    we have 2 system in our landscape: one dv1 other dv2
    in dv1 :
    1. create dp request from so resulting(VF01) :
    _______________________Doc No.   Type  ............................ Clearing Doc
    ___-- fbl5n : 1 open item      : xxxxxx1 RV      .............................
    2. cancel dp request with VF11
    _______________________ Doc No.   Type  ............................ Clearing Doc
    ___-- fbl5n : 1 cleared item : xxxxxx1 RV      .............................yyyyyyyyy
    in dv2 :
    1. create dp request from so resulting(VF01) :
    _____________________Doc No.   Type  ............................ Clearing Doc
    ___-- fbl5n : 1 open item : xxxxxx1 RV      .............................
    2. cancel dp request with VF11 :
    ______________________Doc No.   Type  ............................ Clearing Doc
    __ -- fbl5n : 1 open     item : xxxxxx1 RV      .............................
    __________1 cleared item : yyyyyy   ZB     ............................. yyyyyyyyy
    the billing type(VOVA) and posting key(OB41) setting on both system have similar value. Can anyone point to us where the setting went wrong in second system? Because of that anomaly the system show the dp request as open item on fbl5n or sales document flow.
    thanks in advance.
    Best regards,
    Henry

    further investigation, when we checked the clearing document found in dv2(clearing document which is not referenced by the billing), we found out the document type is 'S' so it was still noted item. so the conclusion is when we cancelled a billing which corresponding accounting document's type is S(noted item) , system created a "clearing" accounting document which type still is S(noted item) too but with negative amount.
    but in dv1, it works normally, when billing cancelled system created clearing document which type is C(clearing document).
    can someone advise us on this? thank you.

  • Transfer of down payment request to FI without dunning area

    Hello,
    when creating a down payment request through VF01 I succeed in filling the dunning area.
    However, the FI-document line does not contain the dunning area.
    Dunning by dunning area/Company code is set.
    Customer "equipped" with dunning area.
    Field BSEG-MABER open for posting (e.g. within F-37 within FI).
    Perhaps you have a hint for a successful transfer.
    Thanks a lot in advance.
    Thomas

    Hi
    Actually looking for any screen exit is available for that or any other way
    Rgs
    RK

  • Create PO WITHOUT Line Items

    Hi Gurus,
    I would like to create empty PO i.e. without any line Items.
    Using ME23N it goes into error but still PO can be put on "Hold" and I still get PO Number with just header data.
    Doing same via BAPI ;BAPI_PO_CREATE1' it goes into error saying "No line Items present".Is there any chance of "creating an Empty PO" via FM/BAPI?
    Please advice asap.
    Thanks,
    Vikram.

    I would like to create empty PO i.e. without any line Items.
    Without purchasing what is the need of PO?
    if still you need to same than press HOLD and note the PO number than open it via me23n it will open.
    Cheers

Maybe you are looking for