Down Payment Invoice/Request

Hi Experts,
I am relatively new to the Down Payment Invoice and Down Payment Request.
I have been searching high and low for documentation with regards to the above mentioned.
Would anyone be kind enough to link me to the relevant resources with regards to Down Payment Invoice and Down Payment Request? Or would anyone be kind enough to actually explain to me how the process works?
Also, I would like to know how would I be able to link the Down Payment Invoice to the actual Invoice later to less then Down Payment amount for payment later?
Thanks a lot for your kind help.

Hi Alvin.
1)DPR
Suppose QTN is of Rs.1000/- , from this QTN if u will make DPR means it will be of Rs.1000/-.
And from DPR u can do incomming payment Rs.1000
Here u can not take installments.
No accounting effects.
Now when u make AR Invoice ,then in AR inv. in Total downpayment u can adjust earlier Rs.1000/-
2)DPI
Suppose QTN is of Rs.1000/- , its first installment is Rs.500/- , then u can make DPI .and its incomming payment.
Now if its second installment is Rs.300/- u can do DPI and its incomming Payment.
Now its last installment is Rs.200 , here u can do AR Invoice with above 500 and 300 adjustments.
Yes, having accounting effects.
Hope , this will help u.
Regards.
Mahesh.

Similar Messages

Issue Reg Down Payment Invoice/Request

Dear All,
I have a scenario where in i have created Purchase Order with CENVAT Components (i.e. BED @8, Cess@2, and Hess@1 along with VAT @4) the total value including tax is say about Rs140000.00. Now i want to pay full Amount as advance i.e 140000.00 (say 120000.00 basic value and 20000.00 tax value ).
When i am trying to create A/P Down Payment Invoice against that Purchase Order as a Full Advance (100%) system is showing error for CENVAT Components, as we can not consider this in A/P Down Payment Invoice.
Can any body tell me any work around ? or alternative way of doing it ?
Regrds,
Kashinath

HEY I HAVE SOLVED THIS ISSUE MYSELF

A/p Down Payment Request and A/p Down payment Invoice

hi All,
I am Using SAP B1 2005B
A/p Down Payment Request :-
1.Wnen i want to give a 50% Advance Based on Purchase Order What is the Procedure. whether i have to use A/p Down payemnt request or A/p down payemnt invoice.
2.whenever i am making down payment request there is no JE and There is No GL and BP affected.
2.a. While making payment against down payment request there are 3 accounts hitted
1.Bank Account.
2. Bp(As Advance-Debit balance)
3.GL linked with BP.(Acccounts payable).
Is Correct or Not?
3. While Making A/p Invoice can we pick this Advace in A/p invoice Entry and can we Adjust .
at this stage Whenever i want to Check the balance of the BP should be Debit Balance(as Advance).
A/p Down payment Invoice:-
What is the Procedure, When it will be Used and What are the GL affected.
Thanks & Regards,
yusuff

Hi,
We are using A/p Down Payment Invoice where the entry is
Party Credited
Advance for capital purhase ie. ofset account is debited
and making payment
Party Debited
Bank Credited
and when linking with Invoice
Advance for capital purhase ie. ofset account is credited
GRNI of Asset A/c is debited.
Here the main issue is in Party ledger its showing 1st credit and then debit and your requirement that Party should be shown debit balance it will be not there it will be in Offset account i.e "Advance for capital purhase ie. offset account"
Now you have to generate query base report if you want to show advances given to party.
This is what we are doing if there is any other possibility kindly revert back all experts.
Thanks
Kamlesh

DIFFIRENCE BETWEEN AP DOWN PAYMENT REQUEST AND AP DOWN PAYMENT INVOICE

HI
ALL
Please tell me the diffirence between AP DOWN PAYMENT REQUEST AND AP DOWN PAYMENT INVOICE
And Please tell me when those are applicable in practical scenarios in SAP B1
Prasad

Hi,
You can check these threads to find out more:
Re: AP Down Payment Request is not being Linked with AP Invoice
Re: Down Payment Problem....
Re: A/P down Payment Issue
Thanks,
Gordon

About AP Down Payment Request, AP Down payment invoice and AP reserve inv.

Hi:
Which are the main differences? I need to pay in advance to my supplier 100% of the invoice, the purchase invoice would be received one month later. How can i link them? And what about the payment, how can i remember easily that invoices are missing when the account balance is = 0 because the payment is done.
Best regards,
Alberto.

Hi,
There is a business need for companies to issue/receive Invoices including tax (or
VAT) for Down Payments made or received. These Invoices can then be cleared with
partial or final Invoices. Companies can record a Down Payment received in SAP
Business One by creating a Payment not based on an Invoice. However, due to legal
requirements in certain countries the recording of a Down Payment requires an Invoice
or a billing document.
Down Payment Request and Down Payment Invoice documents have their own numbering series. The Down Payment Invoice
resembles a regular Invoice and the Down Payment Request resembles a Sales
Quotation. The user may define a different series under Invoices to be used in the
Down Payment document. Neither of these two documents affects the On Hand stock
or the stock valuation. They can be of Items or Service type.
The process for them are:
Down Payment Invoice>Payment of Down Payment Invoice >Regular Invoice> Payment of Regular Invoice.
Down Payment Request>Payment of Down Payment Request > Regular Invoice >Payment of Regular Invoice and Clearing of Down Payment.
For the invoice paid, you can find a Payment Means icon from Invoice window, click on it, there is payment information and a link for it.
Hope this helps,
maggie an

A/R Invoice with freight Linked to A/R Down Payment invoice

Hi All,
scenario:
SAPBO 2007 SP1 PL 12
A/R Down Paymenti invoice 100 + tax20 = 120 (it is paid)
A/R Invoice :
80 + 20(freight) + 20(tax) = 120
When I linked the a/r down payment invoice the system returns this error:
"Total amount of this payment must be less than amount of invoice"
because It compares 100 with 80 not considering the freight of 20.
I tried in SBO 8.8 SP0 PL 14 and it works correctly!!!
Any idea???
Simona.

Hi Simona,
New version has changed certain process based on users request. If 8.8 is working for you, upgrade 2007 version soon.
Thanks,
Gordon

How can we reject a Sales order after first Down payment invoice for Italy?

Hello,
As a legal requirement in Italy the Down paymenty have to be transformed into real invoices, another legal requirement is that an invoice cannot be cancelled it has to reversed by a credit memo.
I would like to know in this context how we can reject a sales order line once a Down payment invoice has been emitted.
When I do enter a reason for rejection in the sales order line I receive the message : V1036: Subsequent documenst exist for item XXX and then V2432 Cancellation not possible. Down payment request already created.
I can create a down payment credit memo in order to cancel the down payment invoice but how can I get rid of my SD requirement in MD04 if I cannot reject the sales order line?

Hello,
have you tried using a recjection code which is not relevant for billing?
Regards,
Uli

Cancel down payment Invoice and accounting document without lines item

Dear masters,
I have a problem with down payment invoice cancel. As you know when doing invoice down payment request, after release to accounting, the accounting doc will have special G/L indicator is F (noted item). And when I cancel this billing down payment and after release to accounting, the accounting doc of cancel invoice will not have any lines item. Now I want to have lines item for cancel down payment, how can I do that? I really appreciate your support!
Regards,
Nguyen Pham.

Dear Nguyen,
As i understand your process you created Downpayment Request from SD.
Then created Downpayment with reference to that request.
Then you generated Billing invoice and released to accounts.
After that you cleared the downpayment with the Billing document.
Now you want to cancel all this.
First cancel the downpayment by FBRA reset and reverse.
Then cancel the billing document.

Down payment Invoice and AR Invoice

Hi,
Can anyone please advise the details of this note for PL44 - I am unable to find reference to this note on the SAP notes page?
Error 'Down Payment sum cannot be greater then total sum', note 1244893
We have PL42. We have created an AR invoice and a Down payment seperately. Both IN and DT are appearing as positive figures in the incoming payment window - how can we reconcile these transations?
Thanks Lisa

Note 1244893 - Error 'Down Payment sum cannot be greater then total sum'
Summary
Symptom
In Tax Groups for output documents, you define a tax code. You
create a sales order with this tax code. You create a partial A/R down payment request and pay it. You copy the A/R down payment request
into the A/R down payment invoice. You open a created sales order and
copy it into the A/R invoice, and then attach an A/R down payment invoice. You try to add the A/R invoice and get the following message:
Down Payment sum cannot be greater then total sum [3703-3].
The A/R invoice cannot be posted.
Other terms
JDT1, OINV, Financials
Reason and Prerequisites
Application error
Solution
This issue will be fixed in a future patch. See the info.txt file
on SAP Service Marketplace to verify when the fix was included.
Header Data
Release Status: Released for Customer
Released on: 15.09.2008 08:29:58
Master Language: English
Priority: Correction with high priority
Category: Program error
Primary Component: SBO-SD-INV A/R Invoice
Secondary Components: SBO-FIN Financials
Affected Releases
Software
Component Release From
Release To
Release And
subsequent
SAP-M-BO 2007 2007 A 2007 A
Related Notes
1294071 - Overview Note for SAP Business One 2007 B Patch 09
1257957 - Overview Note for SAP Business One 2007 A Patch 44

How to link ap down payment invoice to ap invoice which have added.

Hi,Expert,
I encounter this situation in detail as follow:
1. raisethe PO add row line with respective itemcode and quatity.
2. raisethe ap down payment invoice copy from the po created just now.
3. raise the bank -> outgoing pay the cash base on this down pay invoice.
3. raise the Ap invoice copy from PO ,however,the user do'nt link related down pay invoice.
This result in the account is confused and wrongly pay double amount for supplier.
How can I process to repair it now and avoid it in the future ?
Thank you in advance ,appreciate any comment and help.
Best Regards
Eric

Hi Eric,
The general down payment process is as below:-
(1) The down payment request is made in F-47
(2) The down payment is made in F-48
(3) Then you create the MIRO invoice
During MIRO, the system gives up a pop-up to show whether the down payment exist for the vendor or not. This is an information message and user will continue to process MIRO.
(4) After processing MIRO, user need to immediatly clear the down payment againest the MIRO invoice via F-54. In F-54, on selection screen invoice number is given and then from "Process open item" you can get the list of the doan payments for the vendor to choose from.
Regards,
Gaurav

Down Payment Invoice and A/R Invoice

Dear Expert
I have been experiencing a scenario where my client wants to create A/R down payment Invoice to their Customers. But the down payment may or may not be received before issue of the (balanced) A/R invoice and further the client sometimes would have to issue the down payment invoice together with the (balanced) A/R invoice to customers.
The problem is that SAP B1 does not allow me to refer or adjust the down payment in A/R invoice unless there is Incoming Payment received against the down payment . But as per this scenario the payment may or may not be received before raising the (balanced) A/R invoice.
I know that using the A/R down payment request could solve the billing issue, however, it can not reflect account receivable of customers which can not satisfy my client's need.
Could you please suggest some workarounds to overcome this limitation?
Thank you very much
Regards
Elton

Dear Expert
Let me clarify my client's scenario more to see whether you could give advise.
My client's business is project based and the invoicing flow is as below:
Phase 1 -
Invoicing 30%
Phase 2 -
Invoicing 30%
Phase 3 -
Invoicing 40%
Total 100%
However, invoice for phase 2 maybe issued before invoice for phase 1 is paid and so do invoice for phase 3.
There is also possibility that invoice for phase 1 is paid while invoice for phase 2 is not at the time when whole project is completed. Invoice for phase 3 therefore has to be issued before invoice for phase 2 is paid.
The installments for A/R is not applicable in this case since sales would be realized at the time when the A/R invoice is issued.
My client would have to realize the sales upon completion of project phase. A/R down payment invoice almost satisfy this scenario however, no A/R invoice of the balance with reference to the down payment invoices can be issued before the down payment invoices are settled.
Can anything be done to overcome this limitation?
Regards
Elton

Creation of A/R Down Payment Invoice based on Sales Order not logical

When creating a A/R Down Payment Invoice based on a Sales Order you
have the option to create multible ones. Which by itself could be
usefull to create one of 50 % for a certain day and decide they need to
pay another 25 % at a later date.
But SBO does not track what already have been posted. Therefore you can
create a sum more then a 100% without warning or blockage.
Tested this in SBO 2007 A SP:00 PL:00
Scenario:
Sales - AR>Sales Order
Create and post a Sales Order
Sales - AR>A/R Down Payment Invoice
Create an A/R Down Payment
Select the BP and copy the Sales Order
Set DPM to 40%
Post the A/R Down Payment
Sales - AR>A/R Down Payment Invoice
Create an A/R Down Payment
Select the BP and copy the Sales Order
Set DPM to 100%
Post the A/R Down Payment
Sales - AR>A/R Down Payment Invoice
Create an A/R Down Payment
Select the BP and copy the Sales Order
Set DPM to 70%
Post the A/R Down Payment
Making the total for the Sales Order 210% worth of Down Payment
Invoices without warning/blocking. I would expected that you would only
be able to set the rest sum %. For instance first scenario I entered
60% therefore setting the second Down Payment Invoice to a max of 40%
Untill you have used up the 100% and you cannot select the Sales Order
in question..
If multible users do the same work, SBO doesn't show that it has
already been done. Same if you forgot you already created it you can
still create one. Plus sometimes it will happenyou create the Down
Payment Invoice and not paying attention you create the first one with
a 100% and later with the intended percentage..

Hello Petronella,
you are right that B1 is not checking the total value of DP created from the Sales Order.
The logic and checking procedure here is only between Sales Order -> Delivery/Invoice.
DP Invoice is considered as transaction related to document the receipt of the money (parallel to the sales process). Between the moment of basing of DP to Sales Order it is still possibility to adjust Sales Order as there is no posting behind Sales Order.
The question is what would be a checking procedure in case that on Sales Order there is based Delivery and DP? What would be the system priority to take into a consideration?
Regards,
Martin Slavik
Regional Solution Manager

Customer Down Payment invoice (from delivery) not automatically assigned

If I create a Down payment invoice from Sales Order (and I paied it) on the final invoice the sistem automatically assigne the down payment invoice on the final invoice for the order.
If I do the same think but crerating the Down payment invoice from the delivery (and I paid it) when I create the final invoice I need to assigned it manually.
SBO 8.81 PL 06
I haven't found any set up for this, so I think is an error the sistem must work on the same way if the document is copied from the Sales order or delivey.
Someone know if there is some set up? or I need to open an error message to SAP?
Thanks

My question is:
If I make a sales order.
I create a down payment invoice using copy from SO.
I make the incomuing payment for the down payment invoice.
I create the delivery from the SO
I create the invoice from the delivery
The system apply automaticaly the down payment invoice to the invoice (because I select a delivery that is linked to the so that I used to create the down payment invoice).
If I make a sales order.
I create the delivery from the SO
I create a down payment invoice using copy from delivey.
I make the incomuing payment for the down payment invoice.
I create the invoice from the delivery
The system DO NOT apply automaticaly the down payment invoice to the invoice (even if also this document is linked to the delivery that I use to create the down payment invoice).
I know that I can select it manually. But I can select it manually also if I use the SO to create the down payment instead of the
delivery. Why if the situation is the same in the firs case the system do it automatil^cally and in the second case I need to do it manually?
Of course if I create a Down Payment invoice without selecting any document (SO, delivery..) the system don't know if you want to apply the payment to the final invoice.
But If I select the delivey to create the down payment (the same if I select the SO): I want to apply the down payment to the final invoice of this delivery and not to another delivery.

SQL-Query - AR Invoice and related AR Down Payment Invoices

Hello everybody,
I want to show all AR Down Payment Invoices related to a given AR Invoice, i.e. a query approximately in this form:
SELECT
T0.DocNum AS 'Invoice',
T0.DocDate AS 'Invoice Date',
T0.DocTotal AS 'Open Amount',
T1.<<DocNum>> AS 'Down Payment Invoice',
T1.<<DocDate>> AS 'Down Payment Invoice Date',
T1.<<Amount>> AS 'Down Payment Invoice Amount'
FROM
OINV T0 INNER JOIN <<Down Payment Invoices>> T1
ON T0.DocEntry = T1.<<DocEntry>>
WHERE
T0.DocNum = xxxxx
I want to know if such a table <<Down Payment Invoices>> exists and what its name is.
Thanks for your help!
Regards,
Frank Romeni

Thanks for the INV11 - but this table seems to be empty even for invoices we have related down payments, e.g.
SELECT
T0.DocNum, T0.DocTotal, T1.<<whatever you want>>
FROM
OINV T0 LEFT OUTER JOIN INV11 T1
ON T0.DocEntry = T1.DocEntry
WHERE
T0.DocNum = xxxxx
That INV11 is always empty I could see with SELECT * FROM INV11
Regards
Frank Romeni
P.S.: I only post questions to this forum when I analysed my problems and only if I couldn't find any further information in the helpfiles. With regard to your first hint to ODPI there is no reference to INV11 in the helpfiles.
With regard to your comments I feel impelled to to say that if my question is confusing you, then it seems that nobody has ever taught you that meaning can be taken from the context. Regarding the "street", you asked me to find something: Do not waste your time with talking precociously ...
If you should feel annoyed by my comments, we'd better stop this conversation. Otherwise let us fall back to a strictly factual exchange of information, OK? I am not willing to discuss this any further!
F.R.

A/R Down Payment Invoice and A/R Invoice

Dear Experts,
I have thousands of A/R Down Payment Invoices (Not Yet Fully Applied) that were suppose to be applied to the correct A/R Invoice through an integration that didn't work. Is there an easy way or any way to apply the down payments to the correct invoice now in batch. There are so many now that trying to use the Total Down Payment Button "..." crash the system.

Dear Gordon,
We get about 400 to 500 A/R Invoices a day. And right now we have 13,000 down payments we need to match. Oh by the way we are on SAP B1 8.8 Patch 15

Down Payment Invoice/Request

Similar Messages

Maybe you are looking for