Down Payment with reference capital PO (Down Payment Entry)

Hi,
This is regarding Down Payment entry.
While making Down Payment with reference capital PO including taxes (f-48) we are getting the entry as below
Vendor A/c                                                   Debit
Asset   A/c                                                   Debit
Cenvat Clearing A/c                                      Debit
Cenvat Clearing A/c                                      Debit
Input Tax Clearing A/c                                  Debit
Bank A/c                                                      Credit
Down Payment Clearing A/c                        Credit
Input Tax A/c                                                Credit
But User is asking the entry should not be like, he wants the entry should be while making F-48
Vendor A/c                 Debit
Bank A/c                     Credit
We are using 4.7 version.
someone has told me that if we implement some patches then system will show the entry whichever user is asking.
Is it possible? Is there any solution for this?
Please help me on this.
Regards,
Schilukuri

Hi,
No, that is not requirement.
We will make the down payment with reference of Capital PO including taxes
then system will generate 7 to 8 line items. But user is asking system should show only 2 line items as i said above.
But someone has told me that if we apply some patches system will generate the entry as per user requirement.Since we are using 4.7 version.
any one can help me on this..
Regards,
Schilukuri

Similar Messages

Error when posting Down payment with reference to down payment request

Hi Experts,
In October of 2010 we upgraded from version SAP 4.7 to version 604 SAPKH60406.
With this upgrade we decided to select the following FM setting:
"Flag to activate down payment request update to PO history"
If this flag is set, down payment requests are updated to the purchase order history. In addition, when you create a down payment referencing this down payment request , the down payment request is cleared by the down payment.
Use- Set this flag if you want to see the down payment requests in the purchase order history.
So, since October 2010, the Down payment requests have been updated to the PO history (note - no update of the down payment request was made to the PO status tab) and the down payments (made with reference to the down payment request) have been clearing the DP requests.
Today we have applied packages SAPKH60407 - SAPKH60409 and we are in the process of testing.
Now we are experiencing errors when processing down payments:
1. create the down payment request (F-47) - this is OK
2. create the down payment (F-48) with reference to the down payment request - ERROR MESSAGE F5373 - "Order value will be exceeded"
Can anyone please explain why this is happening? We would like to keep the "Flag to activate DPR update to PO history" ON
as it has been since October 2010.
Thanks,
Michelle

Hi,
Please find the below link it will help full for you,........
Order Value will be exceeded Msg No. F5373
Naresh

I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. How can I fix this?

I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. Can I fix this?

I'm fairly new to this, but I think it has to do with the way you have the drop downs named. Did you copy one then keep pasting it in each field? If so, that is the problem. You should rename each one with a different number: Dropdown1, Dropdown2, etc. I think that might solve the issue.

Down payment with reference to sales order only

We are posting Customer Down payment w.r.t Sales order number with line item number. How come we enter sales order number only without line item number at the time of down payment.
Q2- After the down payment posting F-29 , how its possible to change the line item of sales order number?

Dear ,
about my Q2: I want to change Line item number of sales order after posting customer down payment.
Have you looked Q1 : that sytem did not asked to enter line item number of sales order at the time of posting down payment

How to Reconcile payment with invoice made gaainst down payment request

Dear All,
There is a down payment request against which an incoming payment has been made. The actual ar invoice is booked at a later date. Now How do I reconcile the payment made with this invoice. When I try to reconcile it with the invoice using internal reconciliation it gives an error, you cannot reconcile a payment made against down payment request from here.
Please suggest if you know any solution for the same.
Regards,
Husein

Hi Neeraj............
I think there is no need to reconcile as its already a linked with AR Invoice. WHen you do incoming payment on the basis of AR Down Payment then it that down payment reference you should give to AR Invoice. Have you given such link as its provision is there in SAP.......
Regards,

Advacne Payment With Reference to PO

Dear All,
i want to make Advacne payment to the Vendor with reference to a PO.
How can i do it ??
Cheers

Hi
Create the PO.
Goto Transaction F-48,
Enter the Document date, Give the Vendor account, Select the Special G/L as A - Down Payments, Current Assets
Enter the Bank account & amount to be given to vendor, press enter
Enter the Maount & due on date, Enter the Purchase order & Item number.
Clcik on simulate & save the Dcoument.
In the PO item , in the puerchase order history you can see the Document
Thanks & Regards
Kishore

Incoming Payment with Reference to Invoice

Hello All,
I have created Customer Invoice via FB70. I have selected payment terms as 14 Day with 2% cash discount. I am now entering incoming payment via F-28 after 2 days, with reference to Original Invoice. Everything is going perfect.
Now the problem is, after saving the document, neither i can see any invoice reference nor payment terms. They both are showing blank. Only i can see discount amount filled.
I just want know that from which invoice reference, incoming payment has been posted.
Regards,
Jigar

Hi,
Hope you are checking in bank line item. Please check the same in customer line item, there you will see the reference inv doc no in it.
Regards,
Srinu

Bapi for vendor payment with details of tunover &blocked payment chq detai

Hi all
i want to know whether their is any bapi which can provide me all the details of the the vendor.i.e. the total turnover,the blocked,due and cleared payment,with the respective cheque no and the balance outstanding.....
any help in this regard will be very much appreciated....
Thnx
Regards
Praveen

Closed

Vendor Outstanding Payment with reference to Purchase Order

Is there any standard report to see outstanding payments for vendors? I wanted to see purchase orders no, miro no, vendor, clear amount, pending amount, clearing document etc. i tried FBL1N but i didnt get po no. there. Please Guide.

There is no standard report which gives your requirement. You will have to develop the report thru help of abaper or create a abap querry.

Vendor Payment with reference to MIRO Invoice

Dear SAP Gurus,
This is my first posting in this site, I am working for a implementation project first time. I need your help in providing solution for client requirement.
My client is posting a vendor invoice through MIRO & for the payment of the same they are expecting the automatic selection of vendor and amount to make the payment. Is it possible in SAP Standard F-53 screen where vendor payments made manually or automatically in F110. PLease respond.

Hi ASRIPATI ,
In normal SAP F-53 screen it is not possible to automatic selection of vendor and amount also. User manually select those items based on their requirement.
F110 is the only one way for automatic payment.
For this process we have to create the configuration steps in FBZP.
Then we need to mention that payment metthod and house banks in vendor code.
At the time of F110 run wwe have to select the vendor and customer codes range.
Then only System clears that amount automatically..
Regards,
Gamidii

Down payment reducing the commitment with reference to PO

Dear All,
The budget is 1500 USD. The PO was created with an amount of 1000 USD and kept down payment as 250 USD . So the balance is 500 USD. While making down payment through ME2DP, system will bring FM objects from PO against advance line item. After this step, the commitment will reduce from 1000 USD to 750 USD. If any user enters expenditure directly in FI by using the same budget code, system will allow for the remaining amount 750 USD. When we are doing service entry sheet against this PO for full amount 1000 USD then system is giving error message as budget exceeded by 250 USD. This is due to commitment reduced while making down payment. We used the derivation rule based on transaction type to overwrite the commitment but system is bringing commitment field value from PO at the time of posting.
Please give us the solution to avoid reducing the commitment while making down payment with reference to PO.
Update profile: 000101
Value Type: 61 (Statistical Update)
Regards,
Sree

Hi Sree,
You need to check or Configure Automatic clearing of Down Payments, please check the IMG setting:
Public Sector Management>Funds Management Government>Actual and Commitment Update/Integration>Integration>Configure Automatic Clearing of Down Payments/Down Payment Requests:
Activate check box "DP Clr" down payment clearing during a GR/IR
If this flag is set, the down payment is cleared automatically during the creation of the goods receipt (GR) or invoice receipt (IR), depending on your FM settings.
Regards
Javed

Vendor down payment with input tax

Dear Expert
My client receieves down payment with input tax, to meet their legal requirement for VAT filing, they have to book entries as below;
When receieving down payment with input tax:
Dr. Down payment
Input tax
Cr. Bank
When receiveing vendor invoice for remaining AP amount:
Dr. Expense
Input tax
Cr. AP (remaining amount)
Then clear down payment by expense
Dr. Expense
Cr. Down payment
They do in this way, because input tax in down payment and input tax in remaining AP invoice should be listed as two items in their VAT report. And intput tax in down payment document is with reference field which is different from reference field in remaining AP invoice, and reference field is also one mandatory field in VAT report.
In this case, I can not use SAP standard T-code F-54 to clear down payment. But when I tried to create a manual JV to post entry with Dr. Expense and Cr. Down payment, it's OK, but then when I used F-44 to manully clear down payment doc by manual JV, I got problem because the amount in down payment is down payment amount + input tax amount, but the amount in manual JV is only down payment.
Does someone have a solution?
Thanks,
Nicole

Nicole,
Which country is this requirement for? As far as I know, there is no tax incidence on downpayment. Input tax arises only when you receive the invoice, right? Not when you receive a downpayment.

Down Payment with P&L setup

Hi Gurus,
need some help here, currently im using sales contract creation with periodic billing setup and issue Down payment request from VF04 for billing due.
1. im intend to setup DownPayment which have P&L account being setup. Currently i cannt see any P&L During request or Payment received. please adv.
2. When i create downpayment request from Sales contract , its created as noted item.
should i proceed with F-29 and continue with F-39?
when i proceed with F-29 , should i match with document from sales contract to clear off?
when i manage to clear-off the payment and request, is it necessary proceed with F-39 still?

1. F-37 Customer Down payment request. Noted Item.
[R] GL entries appear using my customer number instead of Special GL Account.
is that normal?
2. F-29 Customer Down payment with reference to customer DPR (Button 'Request' )
posted item and SP GL Item.
[R] what is "posted item and SP GL item" meaning?
i did select request and simulate and continue with post action.
3. F-22 customer Invoice.
[R] what posting key that i should put?
should i choose "post with reference"?
4. F-39 Clear the customer down payments.
5. aginest Invoice clear the customer down payment is called clearing of DP.
[R] what is "aginest" mean?
what is step no.5 should do ?
is this will bring P&L account?

DRQ payment on account with reference to an invoice

Hello,
In SBO2005A there was a problem with the open balance BP concerning the next situation
create an in- or outgoing payment by
1. select the customer/vendor
2. Select an invoice (example invoice 100 EUR)
3. go to moneybag and enter an amount of 99 EUR
4. Try to save the payment.
5. system will give you a message the amount to be paid is not equals the invoice SAVE payment
So far so good.
Now when you save the invoice also in SBO2007A you will save the invoice with reference to that payment and the mark: payment on account will be active. the only improvement from SBO2005A and SBO2007A is that at least the balance is correct ( this scenario is one of the fixes when upgrade to sbo2007A reconciliation errors).
In my opinion this is wrong behavior. One way or the other. A payment is with reference to an invoice and then it would be in this case a partial payment or the payment is on account and then there should be no reference to that invoice.
In my opinion the correct behavior must be after saving the payment: error message: please create a partial payment or select payment on account because selected amount and payment amount are not equal.
With regards,
Eddy Rademakers

Hello Kerstin,
I know this functionality and It could be usefull when the over under payment is just a small amount.
But in principal even with this functionality in my opinion a payment could be only
a payment with reference to one or more invoices or a payment on account and not both as it is now in the current SBO.
The current behavior is wrong:
Based on the scenario as described above the payment should be: the mark: payment on account YES.
and no relation to the invoice(s).
with regards,
Eddy

Limiting or control for Residual payment with reason codes

Hi FI Gurus,
When we are received or making payment to customer or vendor, sometimes we need to clear the invoice by receiving or making payments with small differences through residual payment. Is there any control for limiting residual payment.
Lets have an example
invoice posted for 1000
customer dr 1000
sales       cr 1000
Partial payment recd 500
cash/bank dr 500
customer cr   500
final payment received 350 and balanace amount adjusted with residual payment by defining reason code like rounding off difference. So in this case accounting entry will be
customer cr 350
rounding off diff 150
cash/bank 500
being final payment agaisnt invoice
My question:   Is there any way to restrict the residual payment like 10% or 20% of total invoice i.e. 100 or 200 and not more than 20% ? other wise sometime user may adjust any amount may be 100000 through this way by putting the same reason code, which is not fair.
I checked SPRO setting but i did not get anyt setting relating to above case.
If any body know, please let me know? Thanks in advance
Regards,
Prakash

Hi Lawerance,
Thanks for reply.
But I am looking for amount adjusted through residual with reason code. I dont think there is any limitation or control in the SPRO standard setting. Tolerance is preventing user to post document for more than a specific amount. But my question is something different.
I want to control the user for adjusting amount from residual tab with selecting reason code. In other words user should not adjust more than some limit with residual payment by selecting reason codes. Thanks.
Regards,
Prakash

Down Payment with reference capital PO (Down Payment Entry)

Similar Messages

Maybe you are looking for