Downgrade Maxdb - Please help
Hi all please shed some light on this issue
I am doing SAP sys copy using Backup restore.
The IM DVD i am using to run sapinst worked 100 % with version 7.6.
I recently went up to version 7.8 and now sapinst is unable to create the DB instance in the sys copy procedure.
In the sapinst i specify rdbms Version 7.6 but because my database install is allredy on 7.8 it tries to create the instance on 7.8 and fails.
Is there a way to uninstall version 7.8 run sapinst and then do the upgrade just before the restore
As per note 1469675 this is how i am supposed to do it, but the problem is that i dont get to the stage when i can upgrade ...
It tries to create the instance based on version 7.8 and fails.
Thank you for any replies
No i don't have the .inf file in the directory.
> Subprocess starts at 20111109130853
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109130855
OK
7.8.02.23 /sapdb/NBQ/db
7.8.02.23 /sapdb/NBT/db
> Subprocess starts at 20111109130924
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109130925
OK
7.8.02.23 /sapdb/NBQ/db
7.8.02.23 /sapdb/NBT/db
> Subprocess starts at 20111109130927
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109130928
OK
7.8.02.23 /sapdb/NBQ/db
7.8.02.23 /sapdb/NBT/db
> Subprocess starts at 20111109130928
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109130928
OK
7.8.02.23 /sapdb/NBQ/db
7.8.02.23 /sapdb/NBT/db
> Subprocess starts at 20111109130928
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas db_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109130928
OK
NBT /sapdb/NBT/db 7.8.02.23 fast offline
NBT /sapdb/NBT/db 7.8.02.23 quick offline
NBT /sapdb/NBT/db 7.8.02.23 slow offline
NBT /sapdb/NBT/db 7.8.02.23 test offline
> Subprocess starts at 20111109130928
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109130929
OK
7.8.02.23 /sapdb/NBQ/db
7.8.02.23 /sapdb/NBT/db
> Subprocess starts at 20111109130929
Execute Command : /sapdb/programs/bin/dbmcli -R /sapdb/NBQ/db dbm_version
Start subprocess as user with uid: root
> Subprocess stops at 20111109130929
OK
VERSION = 7.8.02
BUILD = DBMServer 7.8.02 Build 023-121-242-871
OS = UNIX
INSTROOT = /sapdb/NBQ/db
LOGON = True
CODE = UTF8
SWAP = normal
UNICODE = YES
INSTANCE = (unknown)
SYSNAME = AIX 5.3
MASKING = YES
REPLYTREATMENT = none,zlib,auto
SDBDBM_IPCLOCATION = /var/lib/sdb/dbm/ipc
> Subprocess starts at 20111109130929
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109130929
OK
7.8.02.23 /sapdb/NBQ/db
7.8.02.23 /sapdb/NBT/db
> Subprocess starts at 20111109130929
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas db_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109130929
OK
NBT /sapdb/NBT/db 7.8.02.23 fast offline
NBT /sapdb/NBT/db 7.8.02.23 quick offline
NBT /sapdb/NBT/db 7.8.02.23 slow offline
NBT /sapdb/NBT/db 7.8.02.23 test offline
> Subprocess starts at 20111109130930
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109130930
OK
7.8.02.23 /sapdb/NBQ/db
7.8.02.23 /sapdb/NBT/db
> Subprocess starts at 20111109130932
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109130932
OK
7.8.02.23 /sapdb/NBQ/db
7.8.02.23 /sapdb/NBT/db
> Subprocess starts at 20111109130933
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109130933
OK
7.8.02.23 /sapdb/NBQ/db
7.8.02.23 /sapdb/NBT/db
> Subprocess starts at 20111109130933
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas db_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109130933
OK
NBT /sapdb/NBT/db 7.8.02.23 fast offline
NBT /sapdb/NBT/db 7.8.02.23 quick offline
NBT /sapdb/NBT/db 7.8.02.23 slow offline
NBT /sapdb/NBT/db 7.8.02.23 test offline
> Subprocess starts at 20111109130933
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109130933
OK
7.8.02.23 /sapdb/NBQ/db
7.8.02.23 /sapdb/NBT/db
> Subprocess starts at 20111109130933
Execute Command : /sapdb/programs/bin/dbmcli -R /sapdb/NBQ/db dbm_version
Start subprocess as user with uid: root
> Subprocess stops at 20111109130934
OK
VERSION = 7.8.02
BUILD = DBMServer 7.8.02 Build 023-121-242-871
OS = UNIX
INSTROOT = /sapdb/NBQ/db
LOGON = True
CODE = UTF8
SWAP = normal
UNICODE = YES
INSTANCE = (unknown)
SYSNAME = AIX 5.3
MASKING = YES
REPLYTREATMENT = none,zlib,auto
SDBDBM_IPCLOCATION = /var/lib/sdb/dbm/ipc
> Subprocess starts at 20111109130934
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109130934
OK
7.8.02.23 /sapdb/NBQ/db
7.8.02.23 /sapdb/NBT/db
> Subprocess starts at 20111109130934
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas db_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109130934
OK
NBT /sapdb/NBT/db 7.8.02.23 fast offline
NBT /sapdb/NBT/db 7.8.02.23 quick offline
NBT /sapdb/NBT/db 7.8.02.23 slow offline
NBT /sapdb/NBT/db 7.8.02.23 test offline
> Subprocess starts at 20111109130934
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109130935
OK
7.8.02.23 /sapdb/NBQ/db
7.8.02.23 /sapdb/NBT/db
> Subprocess starts at 20111109130935
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas db_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109130935
OK
NBT /sapdb/NBT/db 7.8.02.23 fast offline
NBT /sapdb/NBT/db 7.8.02.23 quick offline
NBT /sapdb/NBT/db 7.8.02.23 slow offline
NBT /sapdb/NBT/db 7.8.02.23 test offline
> Subprocess starts at 20111109130936
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109130936
OK
7.8.02.23 /sapdb/NBQ/db
7.8.02.23 /sapdb/NBT/db
> Subprocess starts at 20111109130936
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas db_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109130937
OK
NBT /sapdb/NBT/db 7.8.02.23 fast offline
NBT /sapdb/NBT/db 7.8.02.23 quick offline
NBT /sapdb/NBT/db 7.8.02.23 slow offline
NBT /sapdb/NBT/db 7.8.02.23 test offline
> Subprocess starts at 20111109130958
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas db_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109130958
OK
NBT /sapdb/NBT/db 7.8.02.23 fast offline
NBT /sapdb/NBT/db 7.8.02.23 quick offline
NBT /sapdb/NBT/db 7.8.02.23 slow offline
NBT /sapdb/NBT/db 7.8.02.23 test offline
> Subprocess starts at 20111109131547
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas db_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109131547
OK
NBT /sapdb/NBT/db 7.8.02.23 fast offline
NBT /sapdb/NBT/db 7.8.02.23 quick offline
NBT /sapdb/NBT/db 7.8.02.23 slow offline
NBT /sapdb/NBT/db 7.8.02.23 test offline
> Subprocess starts at 20111109134227
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109134228
OK
7.8.02.23 /sapdb/NBQ/db
7.8.02.23 /sapdb/NBT/db
> Subprocess starts at 20111109134229
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas db_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109134229
OK
NBT /sapdb/NBT/db 7.8.02.23 fast offline
NBT /sapdb/NBT/db 7.8.02.23 quick offline
NBT /sapdb/NBT/db 7.8.02.23 slow offline
NBT /sapdb/NBT/db 7.8.02.23 test offline
> Subprocess starts at 20111109134229
Execute Command : /sapdb/programs/bin/dbmcli -n nbiqas inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20111109134229
OK
7.8.02.23 /sapdb/NBQ/db
7.8.02.23 /sapdb/NBT/db
Similar Messages
-
WRT160N Severe Problem, Cant upgrade (downgrade) firmware PLEASE HELP!!!
Had this router running for acouple weeks. Its had that **bleep** connection problem but just today it got even worse. About every 30 seconds it will lose connection to the modem and internet for about 2 seconds. So even if i try to upgrade my firmware down to 008 i dont get the chance. The upgrade gets about 50% done and then i lose internet and it fails. **bleep**?! please please please help
Solved!
Go to Solution.If you have downloaded the firmware already then disconnect your modem from the router, and just connect a computer straight to the router on any one of the LAN Port's...
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router... -
Im in the process of downgrading my ios 7 to 5.1.1 but when I tried to open my previos ios and back to itunes, i can't find the restore settings and the itunes is in original menu... What will I do? please help me... thanks in advance...
You can't
Apple has never approved a method to downgrade iOS
Allan -
I tried to downgrade my iCloud and when i did it never refunded me can you please help me with this thank you James
<Personal Information Edited by Host>How did you try to downgrade
(Don't post your telephone number in public places, unless you need more useless phone calls) I will ask for it to be removed. -
Hi please help me i try to downgrade my iPad ios to 8.1.3 to 8.1.2 and an error occursd and can't open my iPad only the icon of iTunes and charger appeared please help
That means that it's gone into recovery mode - connect the iPad to your computer's iTunes and reset it back to factory defaults.
Downgrading the iOS version isn't supported by Apple. -
I would like to downgrade from ios 4.0 to 3.1.3... please help
I would like to downgrade from ios 4.0 to 3.1.3. Unfortunately I didnt save the shsh blobs onto cydia or apple server, but I have the shsh blobs on my user account in folder .shsh. Is there any other way to downgrade to 3.1.3. I am extremely unhappy with ios 4.0 and the speaker output on my ipod touch has been affected. The headphones sound ok..i tried restoring to no avail.someone please help me downgrade
from itunes, hold "shift" and click restore. select firmware 3.1.2/3.1.3
u can download from http://www.felixbruns.de/iPod/firmware/ -
why can't i downgrade to mavericks? i have got some problem with yosmite. i would like to downgrade to mavericks.please help me how to get it ? thanks
Hi here are a couple of links you may find useful, the first is if you have made a time machine backup, the second if you have not.
http://osxdaily.com/2014/10/22/downgrade-os-x-yosemite-to-mavericks/
http://www.macworld.co.uk/how-to/mac-software/revert-back-mavericks-from-yosemit e-3581872/ -
Used to have ios 7 betaon my i phone and downgraded to ios 6 so i can upgrade to the official ios 7 but i lost my pc back ups. Please help me
First off, Apple doesn't support downgrading and it can potentially brick your phone. With that being said, if you created a back up in iOS 7 Beta and are trying to restore it to iOS6, you wont be able to. You need to upgrade first then restore from your backup. Don't be suprised if it doesn't work. There is a very real possibilty you may have to start from scratch.
-
How can I downgrade from v 3.0 to 2.2.1 please HELP!!!!
Hi!
I have an iPod Touch 2G and everything was working perfect, I use my ipod to watch some videos on TV then I bought a AV TV out cable and was working beautiful, BUT I saw the update to version 3.0 and I wanted to use the bluetooth option which came with that update, after I bought the version 3.0 the AV cable stop working and keeps telling me is not supported for this ipod when was working perfect before!!! Then I need to downgrade to the last version because I care more about watching the videos on TV than the bluetooth option, I don't care loosing the money I paid for the upgrade just need to fix this problem without spending more money!!!! Please help me because I use this videos for school because I am a teacher and I need my lessons as soon as posible!!!
Thanks!
[email protected]I was able to revert to 2.2.1 (my issue was wireless router compatibility), but couldn't find the details here, or elsewhere in apple support space.
Does apple actively suppress them?
I was able to get the 2.2.1 firmware googling around, I used a German site.
I had to put my iPod into the mysterious DFU mode (a slightly tricky combination of holding the power and home buttons, googled from another site) to get the restore to take. But, then, I was able to shift-click restore and load the 2.2.1 version from a file.
There seems to be a lot of not-quite-correct information floating around the web, so it takes a bit of googling, a bit of sorting, and a bit of persistence. Maybe the same procedure doesn't work for everyone.
I'd post more complete details (e.g. with links) here, but I have a sneaking suspicion that they wouldn't survive. -
Hi everyone,I have an Iphone 4S,when I updated iOS 7 my phone got slow,so please help me how to downgrade it to 6.1.3 or 6.1.3,I have another problem with iOS 7,I cant request my credit balancing,when i type *101# automatically calls and says "this number dows not excits",I wnat iOS 6.1.2 back ..
sorry for my bad english ..
-
Please help! Windows 7 has downgraded it self?:(
Hi, i could really do with some help! i have windows 7 and it had downgraded its self to what looks like Xp or windows 98:/
Here is screenshot of what it looks like:
http://gyazo.com/747ecd10f9083fde112c1d95d349c1fe
I've tried to go to control panel and personalize but there is no option for that, if anyone could please help me i will be very grateful.
Thanks.Hi,
Please try my suggestions:
Run menu > sysdm.cpl > Advanced Tab > performance > select adjust for best performance > make sure you do not allow Windows to choose for you because your computer does not know whats best --- Make sure Enable Aero Peek is checked
---- OR ---
Right click my computer > properties > Advanced System settings > performance > select adjust for best performance > make sure you do not allow Windows to choose for you because your computer does not know whats best --- Make sure Enable Aero
Peek is checked
Kate Li
TechNet Community Support -
How can i downgrade? I am tired. Please Help Me Out!
Hi!
I am using my iphone 4 from past 6months with iOs 4.3.5. Yesterday, i thought of upgrading it to iOs 5.0.1. So, i did it. I am living in Pakistan so i am using a gevey sim. I unlocked the phone but gevey was not supported. I am not an advance user so after checking out different forums, i realized that the actual issue is firmware which has been upgraded to 04.11.08 which doesnt support the gevey. I have tried hundreds of time to find a way out to downgrade the firmware but i know there is no way. So, i want to downgrade it now. I have tried every solution but it is not working.
Please, help me out. I need a downgrade to iOs 4.3.5. Please try to suggest some thing in non-technical language as i am not an advance level user.
Waiting for replies.
Thank You in Advance!Thanks. Atleast some one replied here. So, this means my phone is useless now. I don't want to downgrade actually. I want to use my gevey sim on firmware 04.11.08. Thats it. Apple must have some solution for those who are using gevey as apple made the use of gevey legal. That is what i seen people barking out loud on forums.
-
I want to ask how to downgrade ios 7 to 6.1.3, because a lot of problems ios 7. please help
I want to ask how to downgrade ios 6.1.3 to 7, because a lot of problems ios 7. please help
I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.
-
I don't want to stay with iOS 7 any more, i can't tolerate it to being very slow and to hand while playing games, it doesn't run properly, i have no games in my phone right now becouse of that bug, could i downgrade my ios of iphone 4s? Please help thanx
That is HANG sorry miss type
-
Hiiiii Guys... Im using Iphone 4 16 GB, I would like to downgrade my ios 7.0.2 to 6.1.3 if it is possible please help me...
No, it's not possible. Apple does not support downgrading iOS.
Maybe you are looking for
-
why is it when i am trying to syc my music to my iphone but it says i have authorised my laptop...but i have authorised it! how do i stop this and get my music onto my iphone?
-
RAW from Nikon d3000 can't import in Iphoto
Hi, For some reason, I can'T import RAW files from my Nikon d3000 , to iphoto. It tells me that the files are unreadable. I have all the latest updates, OS 10,5 Leopard ,what's wrong?
-
I have a DropDown box on a jsp form page which gets populated from a resultset connected to a postgresql db. I would like to know how I can add a second column on the drop down. Here's the snippet of code I'm using: query= "SELECT prjname FROM projec
-
Communication Error (-8).....WHAT IN THE HECK IS GOING ON???
One night i was talking to my friend, Phil, (who also has a macbook) perfectly on iChat AV and it was wonderful. The next night i tried again and it wouldn't work with him or my non-macbook friend, Danielle, but only with a different macbook friend,
-
Lightroom 4 catalog problem-can't find photos.
Lightroom 4 catalog does not recognize photos when external hard drive switched to a different USB port. The photos are in My Photopraphs in an external hard drive. I recently had to switch ports and now the catalog can't find the photos.