DOWNLOAD HEADER & ITEM RECORD INTO EXCEL FILE

I WANT TO KNOW THE LOGIC TO POPULATE HEADER DATA AND ITEM DATA INTO SAME INTERNAL TABLE AND AGAIN DOWNLOAD THE SAME TO EXCEL FILE .
Header structure : rectyp ,hdnum ,sbank ,bankl ,accnr , paytp , crda ,iso.
Item structure : rectyp ,valut ,cknum ,amount,bankl,accnr,pdate,bnktc.
Final internal table : Combination of these 2 fields. i need to populate these and download.

Hi,
fill at first your ITAB with header-date and append it. Then append your items.
Do not SORT after appending.
Regards Mario

Similar Messages

Reg: Downloading the internal table into excel file.

Hi,
My requirement is i am collecting data in the internal table and i have to download the contents in an excel file and i have declared like this.
PARAMETERS : x_test    TYPE string
                      DEFAULT 'C:\temp\file.txt'.
I have given the default file path like this and i am using the function module .
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
BIN_FILESIZE                    =
      FILENAME                      = OUTPUT_PATH
      FILETYPE                      = 'DAT'
IMPORTING
FILELENGTH                      =
    TABLES
      DATA_TAB                        = INT_INPUT
FIELDNAMES                      =
   EXCEPTIONS
     FILE_WRITE_ERROR                = 1
     NO_BATCH                        = 2
     GUI_REFUSE_FILETRANSFER         = 3
     INVALID_TYPE                    = 4
     NO_AUTHORITY                    = 5
     UNKNOWN_ERROR                   = 6
     HEADER_NOT_ALLOWED              = 7
     SEPARATOR_NOT_ALLOWED           = 8
     FILESIZE_NOT_ALLOWED            = 9
     HEADER_TOO_LONG                 = 10
     DP_ERROR_CREATE                 = 11
     DP_ERROR_SEND                   = 12
     DP_ERROR_WRITE                  = 13
     UNKNOWN_DP_ERROR                = 14
     ACCESS_DENIED                   = 15
     DP_OUT_OF_MEMORY                = 16
     DISK_FULL                       = 17
     DP_TIMEOUT                      = 18
     FILE_NOT_FOUND                  = 19
     DATAPROVIDER_EXCEPTION          = 20
     CONTROL_FLUSH_ERROR             = 21
     OTHERS                          = 22.
My requirement is i dont want to change my extension as .txt from .exl to my parameter addition and in the function module the file type should be 'dat' only and in the runtime i want to change the file name which i have given in the .
PARAMETERS : x_test    TYPE string
                      DEFAULT 'C:\temp\file.txt' this file.txt into datas.xls.
it would be grateful if some one share some valuable views to wards this query
Thanks and Regards,
Keny

Hi,
Use this code.
It will ask for the file name...there u can change.
data : l_filename type string,
         l_filetype type char10,
         l_path type string,
         l_fullpath type string.
l_filetype = 'DAT'.
*Get the file name
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG
    EXPORTING
      FILE_FILTER          = '*.DAT'
      INITIAL_DIRECTORY    = 'C:\'
    CHANGING
      FILENAME             = l_filename
      PATH                 = l_path
      FULLPATH             = l_fullpath
    EXCEPTIONS
      CNTL_ERROR           = 1
      ERROR_NO_GUI         = 2
      NOT_SUPPORTED_BY_GUI = 3
      others               = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
check l_fullpath is not initial.
*Download file
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
    EXPORTING
      FILENAME                = l_fullpath
      FILETYPE                = l_filetype
    CHANGING
      DATA_TAB                = t_data_sum[]
    EXCEPTIONS
      FILE_WRITE_ERROR        = 1
      NO_BATCH                = 2
      GUI_REFUSE_FILETRANSFER = 3
      INVALID_TYPE            = 4
      NO_AUTHORITY            = 5
      UNKNOWN_ERROR           = 6
      HEADER_NOT_ALLOWED      = 7
      SEPARATOR_NOT_ALLOWED   = 8
      FILESIZE_NOT_ALLOWED    = 9
      HEADER_TOO_LONG         = 10
      DP_ERROR_CREATE         = 11
      DP_ERROR_SEND           = 12
      DP_ERROR_WRITE          = 13
      UNKNOWN_DP_ERROR        = 14
      ACCESS_DENIED           = 15
      DP_OUT_OF_MEMORY        = 16
      DISK_FULL               = 17
      DP_TIMEOUT              = 18
      FILE_NOT_FOUND          = 19
      DATAPROVIDER_EXCEPTION = 20
      CONTROL_FLUSH_ERROR     = 21
      NOT_SUPPORTED_BY_GUI    = 22
      ERROR_NO_GUI            = 23
      others                  = 24.
IF sy-subrc NE 0.
    MESSAGE e398(00) WITH sy-subrc ' Error downloading file' '' ''.
ENDIF.
Regards
Sandeep REddy

Unable to read E$ table records into excel file in linux machine

Hi
I am using below code in ODI procedure to read E$ table record and store it in excel file
ODI Procedure: Technology=Java Beanshall and Command on Target I written below code and placed it in CKM Oracle KM
<@
String OS = System.getProperty("os.name").toLowerCase();
String v_path="";
if((OS.indexOf("win") >= 0))
v_path="D:\Unload_Dir\<%=snpRef.getSession("SESS_NO")%>.xlsx";
else if (OS.indexOf("mac") >= 0)
v_path="path details";
else if (OS.indexOf("nix") >= 0 || OS.indexOf("nux") >= 0 || OS.indexOf("aix") > 0 )
v_path="/odi_a/oracle/Middleware/logs/wcds/odi_logs/<%=snpRef.getSession("SESS_NO")%>.xlsx";
else if (OS.indexOf("sunos") >= 0)
v_path="soliaris path";
@>
OdiSqlUnload "-FILE=<@=v_path@>" "-DRIVER=<%=odiRef.getInfo("DEST_JAVA_DRIVER")%>" "-URL=<%=odiRef.getInfo("DEST_JAVA_URL")%>" "-USER=<%=odiRef.getInfo("DEST_USER_NAME")%>" "-PASS=<%=odiRef.getInfo("DEST_ENCODED_PASS")%>" "-FILE_FORMAT=VARIABLE" "-ROW_SEP=\r\n" "-DATE_FORMAT=yyyy/MM/dd HH:mm:ss" "-CHARSET_ENCODING=ISO8859_1" "-XML_CHARSET_ENCODING=ISO-8859-1"
select * from <%=odiRef.getTable("L","ERR_NAME", "W")%>
But is not reading the data into .xlsx file ,
Please help me it is very urgent
Can I use below code
String os = "";
if (System.getProperty("os.name").toLowerCase().indexOf("windows") > -1) {
os = "windows";
} else if (System.getProperty("os.name").toLowerCase().indexOf("linux") > -1) {
os = "linux";
} else if (System.getProperty("os.name").toLowerCase().indexOf("mac") > -1) {
os = "mac";
T
his is high priority, please help me urgent
Regards,
Phanikanth
Edited by: Phanikanth on Feb 28, 2013 5:43 AM
Edited by: Phanikanth on Feb 28, 2013 6:00 AM
Edited by: Phanikanth on Feb 28, 2013 7:42 AM

Hi,
can you describe what is happening when you run the ODI procedure described below:
- Does the procedure fail with an error, if yes, which error(full details)?
- Does the procedure pass but no xslx file is been created?
- Does the procedure pass and an xslx file is been created, but Excel can't read it? If yes, what is the structure of the xslx file when read in an editor?
What I can see from your code below is that you have choosen -FILE_FORMAT=VARIABLE, but the XSLX format is supposed to be XML.
Regards,
Alex

Reg: Download report into Excel file

Hi All,
While downloading the ALV report into excel file(System -> List -> Save -> Local file) or (List -> Export -> Local file), i cannot download full report in to excel. Even though the report contains just 200 rows(I can able to download about 90 lines).
Some reports can able to download all the data, even the report is very big. Currently I am blind to solve, anyone can help me to solve this issue.
Thanks in advance.

The most elegant way of downloading ALV display data to EXCEL is displaying the excel in the SAP GUI screen itself. Select "Excel in Place" and then save it from there. Before that you need to let the VB script of SAP know as trusted macro. This is done by opening a blank excel file then go to Tools > options > Security > Macro Security > Trusted Publishers (tab) > (check) Trust access to Visual Basic Project. This activation is one time activation. Once you do this you can see ALV display exactly like in normal ALV with all the colors fields etc.

Problem in Download data into Excel File

Hi Friends,
I have one doubt on WDJ.
         I have got the data from the Back and display the data into Table UI Element. Depending upon po_status equals to OA Pending that time conf_Ship_date Column is Empty. That time we can Select All Checkbox Click on Download Button Excel file is not download. Why it not download? Conf_Ship_date Column is Empty. Conf_Ship_date Column is data available that time data download into Excel File.
My Req: if Conf_Ship_date Column is empty that time click on Download that data will download in to Excel. In Excel Conf_Ship_date Column will display in NULL or 00.00.0000 Like this also.
Code:ExcelEle.setConf_Shp_Date(StockEle.getConf_Shp_Date());
This means I am getting date from PoDetails_OutTab(StockEle)this node and add this date to PoDetails_ExcelData(ExcelEle) this node.Finally the date will available in PoDetails_ExcelData this node. By Using this node I will download data.
How to do this work?
Regards
Vijay

Hi Arun,
For Example in Table 4 rows and 14 columns data is available. Select all check boxes click on download button total 4 rows and 14 columns data is downloaded.
Table 4 rows and 14 columns data is available. But in some cells data not available in that time I m getting null values from ECC System. That time I am not able to download.
In Particularly this problem I am getting only date colums.
So now I have develop this code
public void onActiondownloadToExcel(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActiondownloadToExcel(ServerEvent)
     IPrivatePO_Details_ResultView.IPoDetails_ExcelDataNode ExcelNode = wdContext.nodePoDetails_ExcelData();
     IPrivatePO_Details_ResultView.IPoDetails_ExcelDataElement ExcelEle;
     IPrivatePO_Details_ResultView.IPoDetails_OutTabNode StockNode = wdContext.nodePoDetails_OutTab();
     IPrivatePO_Details_ResultView.IPoDetails_OutTabElement StockEle ;
     for(int i = 0 ;i<StockNode.size();i++)
     StockEle = StockNode.getPoDetails_OutTabElementAt(i);
     if(StockEle.getCheckBox()== true)
     ExcelEle = ExcelNode.createPoDetails_ExcelDataElement();// Create Element
     if(StockEle.getConf_Shp_Date()==null)
     java.sql.Date deliverydate1=new java.sql.Date(0,0,0);
     ExcelEle.setConf_Shp_Date(deliverydate1);
     else
     ExcelEle.setConf_Shp_Date(StockEle.getConf_Shp_Date());
By using this code i have to download total Records but in this Conf_Shp_Date colums i am getting 31-12.1899 this output in Excel. But i need in Excel to print Null or 00.00.0000 like
     ExcelEle.setQuantity(StockEle.getQuantity());
     ExcelEle.setDeliv_Date(StockEle.getDeliv_Date());
     if(StockEle.getExpt_Shp_Date()==null)
     java.sql.Date deliverydate2=new java.sql.Date(0,0,0);
     ExcelEle.setExpt_Shp_Date(deliverydate2);
     else
     ExcelEle.setExpt_Shp_Date(StockEle.getExpt_Shp_Date());
     ExcelEle.setVendor_Material(StockEle.getVendor_Material());
     ExcelNode.addElement(ExcelEle);
     if(ExcelNode.size()>0)
     wdThis.wdGetCO_POPendingController().downloadData(wdContext.nodePoDetails_ExcelData());// This is for Downalod data Method
     wdThis.wdGetCO_POPendingController().DownLoadToExcel();// This is for Open Popup Window
     wdContext.nodePoDetails_ExcelData().invalidate();
     else
     wdComponentAPI.getMessageManager().reportException("Please select any one po item from the table",true);
    //@@end
Regards
Vijay
Edited by: KalluriVijay on May 18, 2010 10:05 AM

How to download alv grid output(with field catalog) into excel file format

Hi all,
How to download alv grid output(with field catalogs) into excel file format and same file has to download to application server.
Please help.
Regards,
Satya.

Hi,
On list where alv is displayed, select export icon( green color -> ),select spread sheet.
This will display records in Excel sheet.

How to Download colours of ALV outout into Excel file ?

Hi All,
I have a requirement, Download ALV output into Excel file
but the ALV output contains colors,
I need to download as it is ALV output into Excel,
Please guide me, how to do ?
If it is not possible, Pls provide any other solution for this ?
Appreciate your valuable answers,
Thanks.
Regards,
Prasad.

Hi,
Instead of ALV, ucan directly write the output to EXCEL along with the required attributes. Find the below sample code. This might solve ur problem.
Venkat.
*& Report Y_ALV_OLE
REPORT YALV_OLE.
this report demonstrates how to send some ABAP data to an
EXCEL sheet using OLE automation.
include ole2incl.
handles for OLE objects
data: h_excel type ole2_object, " Excel object
h_mapl type ole2_object, " list of workbooks
h_map type ole2_object, " workbook
h_zl type ole2_object, " cell
h_f type ole2_object, " font
h_c type ole2_object. " color
DATA: FILENAME LIKE RLGRAP-FILENAME.
tables: spfli.
data h type i.
table of flights
data: it_t100 like T100 occurs 10 with header line.
*& Event START-OF-SELECTION
start-of-selection.
read flights
select *
from t100
up to 100 rows
into table it_t100
where SPRSL = sy-langu .
tell user what is going on
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
PERCENTAGE = 0
text = text-007
exceptions
others = 1.
start Excel
create object h_excel 'EXCEL.APPLICATION'.
PERFORM ERR_HDL.
set property of h_excel 'Visible' = 1.
CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 =
*'c:\kis_excel.xls' .
PERFORM ERR_HDL.
tell user what is going on
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
PERCENTAGE = 0
text = text-008
exceptions
others = 1.
get list of workbooks, initially empty
call method of h_excel 'Workbooks' = h_mapl.
perform err_hdl.
add a new workbook
call method of h_mapl 'Add' = h_map.
perform err_hdl.
tell user what is going on
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
PERCENTAGE = 0
text = text-009
exceptions
others = 1.
output column headings to active Excel sheet
perform fill_cell using 1 1 1 200 'Language Key'.
perform fill_cell using 1 2 1 200 'Application Area'.
perform fill_cell using 1 3 1 200 'Message number'.
perform fill_cell using 1 4 1 200 'Message text'.
perform fill_cell using 1 5 1 200 'Dep. Time'.
loop at it_t100.
copy flights to active EXCEL sheet
h = sy-tabix + 1.
perform fill_cell using h 1 0 000145000 it_t100-SPRSL.
perform fill_cell using h 2 0 246156138 it_t100-ARBGB.
perform fill_cell using h 3 0 111230222 it_t100-MSGNR.
perform fill_cell using h 4 0 130230230 it_t100-text.
perform fill_cell using h 5 0 115115105 it_spfli-deptime.
endloop.
EXCEL FILENAME
CONCATENATE SY-REPID '_' SY-DATUM6(2) '_' SY-DATUM4(2) '_'
SY-DATUM(4) '_' SY-UZEIT '.XLS' INTO FILENAME.
CALL METHOD OF H_MAP 'SAVEAS' EXPORTING #1 = FILENAME.
free object h_excel.
perform err_hdl.
FORM FILL_CELL *
sets cell at coordinates i,j to value val boldtype bold *
form fill_cell using i j bold col val.
call method of h_excel 'Cells' = h_zl
exporting
#1 = i
#2 = j.
perform err_hdl.
set property of h_zl 'Value' = val .
perform err_hdl.
get property of h_zl 'Font' = h_f.
perform err_hdl.
set property of h_f 'Bold' = bold .
perform err_hdl.
set property of h_f 'Color' = col.
perform err_hdl.
endform. "FILL_CELL
*& Form ERR_HDL
outputs OLE error if any *
--> p1 text
<-- p2 text
form err_hdl.
if sy-subrc <> 0.
write: / 'OLE-Automation Error:'(010), sy-subrc.
stop.
endif.
endform. " ERR_HDL

Downloading into excel file , the is alignment is out

The reports when downloading into excel file is not what we usually getting. The alignment is out.

Hi Basavaraj,
When you are creating dynamic internal table(itab1) and fields of internal table, at the same time in the same way create one more internal table(itab2) resrict this up to 10 columns.
now
DATA : num type i,
       FNAME(255) TYPE C
           VALUE '/data/sapdata/filename'.
CONSTANTS : C_COMMA TYPE C VALUE ','.
DATA : BEGIN OF I_DISPLAY OCCURS 0,
        REC(400),
       END OF I_DISPLAY.
loop at itab1
num = num + 1.
if num le 100.
   move-corresponding fields to itab2
else.
    exit.
endif.
endloop.
Give column headings
        itab2-col1 = 'name1'
        itab2-col2 = 'name2'
        itab2-col3 = 'name3'
        itab2-col4 = 'name4'
        itab2-col5 = 'name5'
        itab2-col6 = 'name6'
        itab2-col7 = 'name7'
        itab2-col8 = 'name8'
        itab2-col9 = 'name9'
        itab2-col10 = 'name10'
      INSERT itab2 INDEX 1.
      CLEAR itab2.
loop itab2.
   CONCATENATE
        itab2-col1
        itab2-col2
        itab2-col3
        itab2-col4
        itab2-col5
        itab2-col6
        itab2-col7
        itab2-col8
        itab2-col9
        itab2-col10
           into I_DISPLAY-REC SEPARATED BY C_COMMA.
     APPEND I_DISPLAY.
     CLEAR I_DISPLAY.
ENDLOOP.
OPEN DATASET FNAME FOR OUTPUT IN TEXT MODE.
      LOOP AT I_DISPLAY.
        TRANSFER I_DISPLAY TO FNAME.
      ENDLOOP.
    CLOSE DATASET FNAME.
endloop.

Download ALV into excel file

Hi experts,
I used subtotals in ALV.first three columns I claculated based on the addition of individual column.In fourth column i calculated the value based on three calculated values ...It is not problem.
when i download this into excel file the original value is only coming .the calculated value i.e) calculated based on three values didnt get displayed in excel file..Help me please...
Thank u,
Manjula Devi.D

Hi.
I find that
List > Export > Spreadsheet
gives no subtotals, but
List > Export > Local File and then Spreadsheet
does give subtotals.
I find that
Views > Microsoft Excel
followed by
Save As
does give subtotals.
John

Conversion of internal table into excel file format &put it on app server

Hi,
My requirement is to convert the internal table into excel file format and I have to store it on application server so that administrator can send the file thr e-mail attachment.
So, please let me know how to convert the records of internal table and store it on application server in Excel file format.
TIA,
Nitin

Hi,
Use FM GUI_DOWNLOAD to download the data from inernal table to excel sheet.
Then Using tcode CG3Z u can transfer file to application server.
*&      Form sub_download
      text
--> p1        text
<-- p2        text
FORM sub_download.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    BIN_FILESIZE                    =
      filename                        = p_path
     filetype                        = 'ASC'
    APPEND                          = ' '
     write_field_separator           = 'X'
    HEADER                          = '00'
    TRUNC_TRAILING_BLANKS           = ' '
    WRITE_LF                        = 'X'
    COL_SELECT                      = ' '
    COL_SELECT_MASK                 = ' '
    DAT_MODE                        = ' '
    CONFIRM_OVERWRITE               = ' '
    NO_AUTH_CHECK                   = ' '
    CODEPAGE                        = ' '
    IGNORE_CERR                     = ABAP_TRUE
    REPLACEMENT                     = '#'
    WRITE_BOM                       = ' '
    TRUNC_TRAILING_BLANKS_EOL       = 'X'
    WK1_N_FORMAT                    = ' '
    WK1_N_SIZE                      = ' '
    WK1_T_FORMAT                    = ' '
    WK1_T_SIZE                      = ' '
IMPORTING
    FILELENGTH                      =
    TABLES
      data_tab                        = it_final
    FIELDNAMES                      =
EXCEPTIONS
    FILE_WRITE_ERROR                = 1
    NO_BATCH                        = 2
    GUI_REFUSE_FILETRANSFER         = 3
    INVALID_TYPE                    = 4
    NO_AUTHORITY                    = 5
    UNKNOWN_ERROR                   = 6
    HEADER_NOT_ALLOWED              = 7
    SEPARATOR_NOT_ALLOWED           = 8
    FILESIZE_NOT_ALLOWED            = 9
    HEADER_TOO_LONG                 = 10
    DP_ERROR_CREATE                 = 11
    DP_ERROR_SEND                   = 12
    DP_ERROR_WRITE                  = 13
    UNKNOWN_DP_ERROR                = 14
    ACCESS_DENIED                   = 15
    DP_OUT_OF_MEMORY                = 16
    DISK_FULL                       = 17
    DP_TIMEOUT                      = 18
    FILE_NOT_FOUND                  = 19
    DATAPROVIDER_EXCEPTION          = 20
    CONTROL_FLUSH_ERROR             = 21
    OTHERS                          = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " sub_download
Otherwise use OPEN DATASET and TRANSFER statement to download data from internal table to direct application server
Regards,
Prashant

How to convert alv list into excel file?

Hi Experts,
        i have created one report for Due Date Analysis.
Now My output is displaying in ALV list. But I need to convert the data which in alv list into Excel File. then only i have to send the Excel File to the Customer Thro Email.
     So i need the Function Module to Convert the Data into Excel File.
Thanks,
Neptune.M

Hi,
U can use function module gui_download.
CALL FUNCTION 'GUI_DOWNLOAD'
     EXPORTING
    BIN_FILESIZE       =
      filename           = 'C:\Transportaionlane.XLS'
      filetype                       = 'DAT'
    WRITE_FIELD_SEPARATOR           = ' '
    HEADER                          = '00'
    TABLES
      ata_tab                       = t_trans_lane_dis[]
       OTHERS                          = 22
if u want with header then pass the header.
regards
Ahasan

How to download data from spool to excel file

Hi,
I have requirement like....i need to download data from spool to excel file.
Please let me know the process how to download...
<removed by moderator>
<removed by moderator>
Thanks,
Khasimsa
Moderator message: please (re)search yourself before asking, do not assign priorities, do not offer re-ward
locked by: Thomas Zloch on Sep 8, 2010 1:18 PM

Hi try this way..
*FM called that returns the Spool Request Number data into and internal table
CALL FUNCTION 'RSPO_RETURN_ABAP_SPOOLJOB'
    EXPORTING
      rqident              = p_spool                     "Spool Request Number
      first_line           = 1
    TABLES
      buffer               = it_spool_xls                            "Internal table that will have the Spool Request No data
    EXCEPTIONS
      no_such_job          = 1
      not_abap_list        = 2
      job_contains_no_data = 3
      selection_empty      = 4
      no_permission        = 5
      can_not_access       = 6
      read_error           = 7
      OTHERS               = 8.
*To convert the spool data into excel format
CALL FUNCTION 'SO_RAW_TO_RTF'
    TABLES
      objcont_old = it_spool_xls               "Internal table having spool data
      objcont_new = it_xls_spool.           "Int table having Excel format data converted from Spool data
"call GUI down Load by passing it_xls_spool
Prabhudas

How count number of item records in a File: Idoc to File scenario

Hi All,
I am configuring an IDOC to File scenario.
Once all the IDOC data is dumped on a File, I need to calculate the number of Item records in this file and write this number at the end of the trailer record in the file.
Is theer a way to calculate the item data records(or say number of lines in the file) in the message mapping area. Or any other simple way to do it.
Appreciate your help on same.
Thanks
Shirin

hi,
Use the count function for ITEM node the assign this count value to the receiver field , keep the ITEM context to header!
Thanks,
Vijaya.

Split records into two files based on lookup table

Hi,
I'm new to ODI and want to know on how I could split records into two files based on a value in one of the columns in the table.
Example:
Table:
my columns are
account name country
100 USA
200 USA
300 UK
200 AUS
So from the 4 records I maintain list of countries in a lookup file and split the records into 2 different files based on values in the file...
Say I have records AUS and UK in my lookup file...
So my ODI routine should send all records with country into file1 and rest to file2.
So from above records
File1:
300 UK
200 AUS
File2:
100 USA
200 USA
Can you help me how to achieve this?
Thanks,
Sam

1. where and how do i create filter to restrict countries? In source or target? Should I include some kind of filter operator in interface.
You need to have the Filter on the Source side so that we can filter records accordingly the capture the same in the File. To have a Filter . In the source data store click and drag the column outside the data store and you will have Cone shaped icon and now you can click and type the Filter.
Please look into this link for ODI Documentation -http://www.oracle.com/technetwork/middleware/data-integrator/documentation/index.html
Also look into this Getting started guide - http://download.oracle.com/docs/cd/E15985_01/doc.10136/getstart/GSETL.pdf . You can find information as how to create Filter in this guide.
2. If I have include multipe countries like (USA,CANADA,UK) to go to one file and rest to another file; Can I use some kind of lookup file...? Instead of modifying filter inside interface...Can i Update entries in the file?
there are two ways of handling your situation.
Solution 1.
1. Create Variable Country_Variable
2. Create a Filter in the Source datastore in the First Interface ( SOURCE.COLUMN = #Country_Variable)
3. Create a new Package Country File Unload
4. Call the Variable in Country_Variable in Set Mode and provide the Country (USA )
5. Next call the First Interface
6. Next call the Second Interface where the Filter condition will be ( SOURCE.COLUMN ! = #Country_Variable )
7. Now run the package .
Solution 2.
If you need a solution to handle through Filer.
1. Use this Method (http://odiexperts.com/how-to-refresh-odi-variables-from-file-%E2%80%93-part-1-%E2%80%93-just-one-value ) to call the File where you wish to create store the country name into the variable Country_Variable
2. Pretty much the same Create a Filter in the Source datastore in the First Interface ( SOURCE.COLUMN = #Country_Variable)
3.Create a new Package Country File Unload
4.Next call the Second Interface where the Filter condition will be ( SOURCE.COLUMN ! = #Country_Variable )
5. Now run the package .
Now through this way using File you can control the File.
Please try and let us know , if you need any other help.

Convert report output into excel file

hiii,
Can we convert output of report into excel file format?
Plz tell me the.
Thanks in advance

Hello,
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_paptoexcel.htm
29 Building a Report for Spreadsheet Output
Regards

DOWNLOAD HEADER & ITEM RECORD INTO EXCEL FILE

Similar Messages

Maybe you are looking for