Flash animation preview is all white

I'm using Flash CC on a windows computer. My document is an HTML5 canvas. I have my animation all finished, with the exception of the Actions for the button. I have tested the animation before adding any Actions and it shows up in the browser fine (I used both Chrome and IE). But when I add in the Actions for the button to go to another web page and test it out, the animation turns all white. I used the code snippet "Click to go to Web Page", while the button is selected.
I have looked at many different sites and books and it looks like I'm doing everything right. But my test just shows a white box.
In the output is says the following:
WARNINGS:
Text support is limited. It is generally recommended to include text as HTML elements (see DOMElement). (6)
Frame numbers in EaselJS start at 0 instead of 1. For example, this affects gotoAndStop and gotoAndPlay calls. (2)
Content with both Bitmaps and Buttons may generate local security errors in some browsers if run from the local file system.
Motion tweens are published as frame by frame animations. Use classic tweens where possible. (15)

I figured it out!!!! I was using the code snippet from the ActionScript Folder, not the HTML5 folder. When I switched it it works fine!!!

Similar Messages

Camera flash- photo turning out all white and blurry

Every time i take a photo w the iphone 4s if the flash is on or even if the flash is set on auto it shows up all white and you can not see the photo and it's blurry. Is there a way to adjust the flas strength?

Take the case off that is reflecting the flash into the camera lens.

Get border when resizing flash anim in dreamweaver

Hello, I'm needing some help , I'm not sure weather its something i'm doing in dreamweaver or weather I need to export the flash anim with the document properties just a little bit smaller than the flash anim when exporting when in theory shouldn't have to do?
the problem I'm having is I export a flash anim out of flash I make sure the document properties and the flash anim line up so theres no visible boarder when exiting.
when I'm at the button stage and drag onto the stage to be able to export, ( sometimes I find that the flash border - say if my anim is 220 by 185 . when i click on it (dragged button with movie inside from libarary to stage)
the stage - as I am told I can't export a flash anim with an alpha white off the flash stage I have to make the stage the same size as the button -
So i make the stage size 220 by 185 when I'm dragging the button to line up to the stage I find sometimes its off?
Is there a better way to export a flash anim as it is without having to change stage properties then dragging the button to fit the stage then get url options ect.
anyways. I am finding that I am having to make the stage size (in flash ) a few extra pixels smaller than the box button 220 by 185 so what i'm doing is making the stage say 218 by 183 to then draggin the button inbetween the lines on the doccument border in flash. then exporting.
I find if i Don't do this sometimes in dreamweaver, when I open dreamweaver instert app div then import swf into the app dif then resize the swf I get a boarder.
But even then I find sometimes if i do an app div then insert media swf and resize the swf i get a border, say if i make the boarder properties in flash red.
sometimes I get a red boarder.
but on other pages say i have a about page I resized it its fine then on another page import app dive then impor the exact same swf file resize it it suddenly gets a boarder (i'm testing using red backround in flash when exporting as a movie.
why do sometimes I get a boarder around swf in an app div when importing into dreamweaver.
thanks kindly

I read this twice and still don't quite know what you're asking. Flash questions are best posted in the Flash forum.
Animations used in Web pages should be sized appropriately before you bring them into Dreamweaver. Same goes for static images. If you need a 200px wide banner, design it at 200px wide.
As for APDivs, honestly don't know why you would need one. A regular CSS division (no positioning) is all that's required for 98% of layouts. http://apptools.com/examples/pagelayout101.php
For answers to layout questions, we need a link to your test page.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Pages Document displays all white in preview

I took an old flyer that I had on my iPad and brought it over to my MacBook Pro. After I finished the modifications I tried to put it back on my iPad. It kept hanging on the import so I decided to just save it as a PDF and manually place it on the iPad. However, when I save as a PDF all that displays is a white page, if I try to print the preview screen is all white as well.
Any help would be appreciated, I need to get this flyer ready by Monday.
Thanks
PB

There was one (maybe two) plain yellow object like this one. I build this one in a hurry with Gimp but in the doc it was a vectorial object.
and if I remember well, after removing it (or them) the doc behaved well.
If I may get the doc with is treated in this thread, I would try to identify it in the index.xml file.
Maybe I would understand what's wrong with it.
Yvan KOENIG (VALLAURIS, France) dimanche 5 février 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

My flash animation won't work when I preview my webiste in the browser.

I am using Dreamweaver CS6. I have inserted a flash animation file into my website that I created in Flash. And it plays just fine in the design part of Dreamweaver. But when I Preview In Browser, it does not appear, OR it tells me i need to download the newest flash player and once ive done that, still does not work. HELP!

Nancy O. wrote:
Flash is a dead web technology for a lot of reasons, including security issues & lack of support for it.
Best of luck with your assignment!
Nancy O.
+1 on that. I completely agree with you Nancy. But whats funny is most schools today have this as part of their syllabi which is a shame. I saw this high-end web technologies school whose motto is 'We shape the developers of tomorrow.' that does not have HTML5 or CSS3 as part of their Semester 1 or 2 but has Flash in 3 semesters. Whats more ironic is they're not even teaching game development (one domain where Flash may still survive) but their syllabi consists of Flash Website development! Lol!
Like they say, What kids learn in college in their 1st year is already outdated by the time they enter their 4th year, thanks to ever-evolving technology!

Why does my MacBook Air power on to an all white screen, and after a minute will flash a folder icon with a question mark on it?

My computer powers on to an all white screen, after it locked up. How can I reboot?

You will need to reinstall OS X.

Hi , clicking photos using falsh are all white flashed..

this is the new phone I got today(just upgraded to ios 4.3.3)
everytime I click photos using flash they are come up white with excess white flashed cant even see the actual picture
is this because os upgrade? can someone please help

It was my pleasure.

Certain flash animations have black stripes all over them

[http://www.evony.com/ Evony]
The main Evony flash animated logo displays black stripes across it as it animates. I don't experience this with any other browsers. (opera 11 and any chrome build I've come across). This is the only website producing this problem for me in firefox. I have uninstalled flash and reinstalled (via an uninstall tool even).

Try to disable hardware acceleration:
* Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
See also http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins

Flash Animation: Font Not Displaying Correctly

Hi all!
I am having a problem with a Flash animation in Captivate that seems like it should be an easy fix, but I can't seem to figure it out.
I have a very simple Flash animation that I developed in CS5. It previews in Flash perfectly, play correctly in Flash Player, but when I insert it into Captivate 4 the fonts do not display correctly. Capital letters are missing as well as other letters.
It's not a matter of AS2 vs. AS3 as I have already tested that. It also is not a frame rate or version issue as I have confirmed they are the same rates and the same version.
Can anyone shed any light? Anyone else had this same problem? Any guidance or suggestions would be much appreciated.
Thanks!
Daniel
Screen shot:

Hi dmendoza2,
Did you embed your fonts into the flash animation? Make sure all characters necessary are embedded.
Jim Leichliter

Flash animation dropping down

Here's my site: http://www.barristerdigital.com/
My flash animation has dropped down out of the blue bar I set up and I'm not sure why. I'm open and grateful for any suggestions.

"FlineCo" <[email protected]> wrote in
message
news:gopblq$c47$[email protected]..
>I added a simple flash animation (slideshow) to a site I
am working on
>which is
> located under the navigation bar that has a drop-down
menu (created in
> Fireworks). When I preview the site in Firefox or
Internet Explorer on a
> PC,
> the drop-down menu is behind the flash animation and all
of the links
> cannot be
> seen. Is there an easy solution to this problem?
Google "wmode" and use opaque
Thierry | Adobe Community Expert | Articles and Tutorials ::
http://www.TJKDesign.com/go/?0
Spry Widgets |
http://labs.adobe.com/technologies/spry/samples/
[click on
"Widgets"]
Spry Menu Bar samples |
http://labs.adobe.com/technologies/spry/samples/menubar/MenuBarSample.html

Flash animation to html conversion hairline problem

Hi. I am Suzi. I am currently working in Flash CC and working with some animations. I am needing to turn the Flash animations in to HTML and Java Script which are being viewed on iPads, iPhone and on the net. My issue is that when they are eventually view they loose all quality and also have a warning sign stating that
"Warnings generated while copying/importing in (name of the file)
*some artwork contains hairline stroke, which is not supported in HTML5 Canvas document, and has been converted to solid.
The animations come out with a lot of white section obviously the hairlines. I do not have the ability to change the 120 animations nor the time. Is there a way we can fix this problem? Thanks

This animation is a frog. When he jumps or moves we can see the white behind the frogs eyes its seems to move slower than the rest of his image. Also there seems to be white hairlines across the animation, only flashes up quickly but I cant use him this way. . Put it this way the animation doesn't come out clean. I assume its because of the stroke change. Now maybe this is not the reason.
as you can see there is a hairline across his arm. this is viewed in Fire Fox IE, etc. This is a Flash Doc changed into a HTML canvas from AS3 document format.
These animations were produced years ago and are copyright for the company i work for.
They are looking at making these flash files available on every media for their employees (coaches).
There is a PC based program called COMPOSICA that is a learning program and has modules that the teachers need to use.
This is the base of where the animations need to start. the program is then used through the web on ipad, iphones etc.
So bottom line is we need the cleanest image we can get.
So i assume that makes sense...hee hee
Thank you Suzi

Flash Animation Blocks Drop-Down Menu

I added a simple flash animation (slideshow) to a site I am
working on which is located under the navigation bar that has a
drop-down menu (created in Fireworks). When I preview the site in
Firefox or Internet Explorer on a PC, the drop-down menu is behind
the flash animation and all of the links cannot be seen. Is there
an easy solution to this problem?
Thank you,
Troy

"FlineCo" <[email protected]> wrote in
message
news:gopblq$c47$[email protected]..
>I added a simple flash animation (slideshow) to a site I
am working on
>which is
> located under the navigation bar that has a drop-down
menu (created in
> Fireworks). When I preview the site in Firefox or
Internet Explorer on a
> PC,
> the drop-down menu is behind the flash animation and all
of the links
> cannot be
> seen. Is there an easy solution to this problem?
Google "wmode" and use opaque
Thierry | Adobe Community Expert | Articles and Tutorials ::
http://www.TJKDesign.com/go/?0
Spry Widgets |
http://labs.adobe.com/technologies/spry/samples/
[click on
"Widgets"]
Spry Menu Bar samples |
http://labs.adobe.com/technologies/spry/samples/menubar/MenuBarSample.html

Flash animation not showing up on HTML page

I just created a test page for my flash animation, but all I
get is a blank white page. Check it out here:
http://www.inspired-evolution.com/Flash/test.html
I am adding the flash via dreamweaver CS3 under
insert>>media>>flash
the code being produced is this:
<script type="text/javascript">
AC_FL_RunContent( 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wid th','720','height','73','title','IE
Intro','src','IE_intro','quality','high','pluginspage','
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movi e','IE_intro'
); //end AC code
</script><noscript><object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0"
width="720" height="73" title="IE Intro">
<param name="movie" value="IE_intro.swf" />
<param name="quality" value="high" />
<embed src="IE_intro.swf" quality="high" pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash" width="720"
height="73"></embed>
</object></noscript>
and the html file and swf are in the same directory and both
uploaded on the server.

hello, i haven't' any idea why isn't show
tip:
read this

Reducing CPU usage of Flash animation

Hello!
I have a simple Flash animation - fading in and out different
images. I have done it with an Actionscript (changing alpha value).
That worked ok only on new processors - on all others it eats 100%
CPU. I then tried to do it with timeline (motion tween between 2
alpha values of picture). Now it is considerably better, but on
CPUs lower than 2 GHz it still eats 100% CPU. Size of animation is
940x160. How can I do this fading correctly so that CPU will not
have to do so much calculations?? Please help me!

sent too soon - TINT to the solid white background - always
avoid alpha whenever possible as flash
will have to calculate the difference in colors throughout
the tween - Tinting is far more processor
friendly.
Chris Georgenes / mudbubble.com / keyframer.com / Adobe
Community Expert
Chris Georgenes wrote:
> use TINT tweens instead of Alpha.
>
> Chris Georgenes / mudbubble.com / keyframer.com / Adobe
Community Expert
>
>
> Tiansen wrote:
>
>> I uploaded banner animation at
http://www.process.si/banner-slo.swf.
I
>> dont use any class with it now because it is done
entirely with
>> timeline and motion tween between two images with
different alpha
>> value. It is only a sample of what I try to achieve.
If I understand
>> you correctly, roozbeh, you suggested to use white
rectangle and
>> adjust alpha value of that rectangle. Why is that
better than changing
>> alpha of original image?
>> I also noticed that size of animation does matter!
If you put some
>> program, i.e. task manager over a part of animation
it eats
>> significantly less CPU. It depends on percentage of
animation area
>> covered.
>>

How to adjust speed of Flash animation within Adobe Captivate

I have three Flash animations that were bought from istockphoto.com. The animations were imported into the project within Captivate. When the individual slides are playing in the project, the speed and timing is perfect. When the project is then to be published to preview the entire project as a whole, all of the animations speed up and are playing continuously throughout the desired slide. I don't know how to slow down the animation and have it play only one time through. What are the properties that I need to adjust in order to slow down the animation?

Hello,
This is a possibility, not sure: the framerate for Captivate is normally 30fps whereas the default framerate in Flash is 25fps. You can try to change the fps in the Captivate project, in the Preferences (see screenshot)
Lilybiri

Flash animation preview is all white

Similar Messages

Maybe you are looking for