Download of webutil-DLLs fails

Hi,
according to DocId 252600.1 I've changed the line in webutil.cfg to
install.syslib.location=http://localhost:8888/forms90/webutil
Now there is no error message while downloading the DLLs but when I make a call to webutil my form hangs.
Java Console
JInitiator: Version 1.3.1.13
Verwendung der JRE-Version 1.3.1.13-internal Java HotSpot(TM) Client VM
Home-Verzeichnis des Benutzers = C:\Dokumente und Einstellungen\nellw
Proxy-Konfiguration:Manuelle Konfiguration
Proxy:10.192.2.4:80
Proxy-Überschreibungen:10.*.*.*,*.*.steag.de,<local>
JAR cache enabled
Location: C:\Dokumente und Einstellungen\nellw\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
Loading http://10.193.57.229:7782/forms90/java/webutil.jar from JAR cache
Loading http://10.193.57.229:7782/forms90/java/f90all_jinit.jar from JAR cache
Loading http://10.193.57.229:7782/forms90/java/icons.jar from JAR cache
Loading http://10.193.57.229:7782/forms90/java/jacob.jar from JAR cache
RegisterWebUtil - Loading Webutil Version 1.0.2 Beta
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Version von Forms-Applet: 9.0.4.0
java.lang.UnsatisfiedLinkError: no JNIsharedstubs in java.library.path
Indeed I can't none of my DLLs on my pc. Where should the DLLs be located after download?
BTW: when I put them to the bin-directory by hand the form works fine.

Looks like an issue with your connection. Could you please let me know the following:
1. The OS and the version of Adobe Reader on your system.
2. The browser being used.
Just to be sure whether or not its an issue with Reader, can you try and do the following:
1. Open the page: http://helpx.adobe.com/acrobat/kb/update-patch-acrobat-reader-10.html
2. Right click on the hyperlink "10.0" under the "Vers." column in the "Windows update file information" table.
3. Click on "Save Link As" or likewise and provide a location to save the PDF.
Does this work?

Similar Messages

Getting "querypanel.dll failed to register" on Windows 7 32 bit machine

Trying to move from CR 2008 SP2 to CR 2008 SP3.
For the CR 2008 SP2 version of our application, which runs our Crystal .rpt files, we used Visual Studio 2005. we then created a Visual Studio .msi file, using the merge module (CRRuntime_12_2), to install this application on a target machine that had .NET Framework 2.0 and VC++ Redistributable 2005 SP1 installed. If these two latter prerequisites were not installed, our install would fail because the CEReportSource.dll could not be registered.
After installing CR SP3 on my development machine, we created a new Visual Studio project, again using Visual Studio 2005. I used CRRuntime_12_3 as the merge module and everything else was the same.
I was getting this same error message "CEReportSource.dll failed to register" when I attempt to install the SP3 version of the app on the very same machine on which I previously successfully installed the SP2 version. I found an answer in these forums to install Microsoft Visual C++ 2005 SP1 update. Even this did not help. When I installed MS VC++ 2008 Redistributable - x86 9.0.30729.17, finally the problem of "CEReportSource.dll failed to register" went away on XP and Vista machines.
Now I am trying to install my program on Windos 7 32 bit machine and I get "querypanel.dll failed to register".
Q1. By installing S VC++ 2008 Redistributable - x86 9.0.30729.17, the problem of "CEReportSource.dll failed to register" did not occur. Is this the right thing to do. I am not sure why VC++ 2005 SP1 did not fix the issue.
Q2.What do we need in order to prevent "querypanel.dll failed to register" error on Windows 7 32 bit machine.
Thanks for your time.

Moved to .NET SDK forum.
Search here, lots of info on distribution. Likely caused by MS updated the C++ runtime to include security updates. Go to MS's site and download the latest C++ distribution package with enhanced security.
If you use the CR MSI package rather than the Merge Modules it should work.
Thank you
Don
Edited by: Don Williams on Nov 9, 2010 2:16 PM

Run MAX,message'Initialization of C:\WINNT\System32\nipalu.dll failed. Why?

The problem is that Max will not open correctly, therefore rendering Labview useless as it can not use any of the PCI Cards in the PC.
When MAX is run, the program opens as normal, i.e. it presents the MAX explorer screen. Approximately 2 seconds later it displays the message:
Initialization of the dynamic link library C:\WINNT\System32\nipalu.dll failed.
The process is terminating abnormally.
therefore labview cannot detect any devices or signal names.

I have had the problem fixed after a trip NI
Im putting the fix on this forum incase anybody else is having the same problem, or has it occur in the future.
In short for some reason, Labview has moved the nipalu.dll file from its original place in memory, therefore MAX can not find it to initialize it.
Steps for correction:
1) Download palBase Utility from NI.COM
2) Copy palBase Utility onto the C: Drive on the PC
3) Go to the START menu and select RUN
4) type COMMAND and press Enter
5) In the command prompt type
palBase -b 69000000 -s 45000000
6) When successful message appears, type exit and enter
7) re-boot PC and run MAX - All should work correctly
8) DELETE palBase from C: Drive

CR for VS2010 deployment - crtslv.dll failed to register

I'm still having problems with packaging up the CR for VS2010 library with our applications installation.
I'm using InstallShield 2011 for the installation setup.
I've included the CRRuntime_13_0.msm file. (That is the only MSM file I included, are the others needed also?)
I've included the Microsoft Visual C++ 2005 SP1 Redistributable Package (x86 and the x64 versions.)
I have tried to do a test install on both a 64bit and a 32bit Windows 7 computer and it keeps giving me the crtslv.dll failed to register error on both computers.
Error 1904.Module C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crtslv.dll failed to register. HRESULT -2147010895. Contact your support personnel.
I thought it might just be due to the 32 bit MSM causing the problem on the 64bit computer, but I can't even get it to install on a 32bit computer. (On the 32bit computer install, I even removed the x64 bit version of the MS C++ 2005 Redistributable from the installation setup just to make sure it wasn't causing a problem).
I have even tried having my Install Shield setup 'Chain' the CRRuntime_32bit_13_0.msi file to my main installation (not using the Merge module). Even when that runs, it produces the same crtslv.dll failed to register again.
BUT, if I run the CRRuntime_32bit_13_0.msi manually on the computer it installs correctly. (I even tried using the same /qf parameters that InstallShield is using on it and it also worked OK that way.) So I can't figure out how to get it to run in conjunction with my InstallShield installation.
Can anyone give me any suggestions?
Mike...

I finally got past this issue and got things to install, with a few hackish work-arounds.
First the CR13 msm redistributable appears to requre the 32 bit version of "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security" that you'll read about in every post. On 64 bit machines I found that even when it was installed,I would still get a crtslv.dll failed to register message, followed several other dlls not registering. Once I installed the 32 bit version on the 64 bit OS, the crystal 13 redistibutable installed fine everytime. I did this on several 64 bit VMs all running Server 2003,XP, and Windows 7. It ran fine every time.
The problem you'll face is how do you install the 32 bit version of this ATL security pack on a 64 bit machine. You may be able to download and run the 32 bit version from Microsoft's site with the link Ludek has posted. That wouldn't work for me because I had to distribute it with my software so I used the prerequisite available for InstallShield. The prereq however is designed to only run on 32 bit machines, so I edited it in InstallShield and modifed the conditions to allow it to run on both 32 & 64 bit operating systems.
The next problem encountered is that this 32 bit prereq getting installed on a 64 bit machine will result in an error being returned that the installation appears to have failed. Well it is a 32 bit installation not intended for a 64 bit OS and we're not supposed to do that. I did say hackish work-around. The 32 & 64 bit files are installed to different directories and the 64 bit version does not get overwritten. If you check the event viewer you'll see a message logged in that the installation of the ATL prereq completed sucessfully. So I modified the behavior of the prereq in InstallShield to "continue the setup if the condition still indicates it is required after completion". Now it runs without error and everything for Crystal installs sucessfully.
The final problem was also with the pre-requisite. The code determines if it is already installed by looking for the file:
[WindowsFolder]\WinSxS\x86_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_473666fd\ATL80.dll
I found on some machines it was previousy installed to:
[WindowsFolder]\WinSxS\x86_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.4053_none_d1c738ec43578ea1\
This results in the prereq being required every time because the file it's checkig for is not found. Furthermore, it fails every time, most likely because it's alreday installed and not supposed to be installed again. So once again, I modified the prereq conditios in InstallShield and made it look for the file in both locations to determine if it was installed.
I haven't seen any problems since with either the Crystal runtime or the ATL update. Happy day.
The part I stll don't understand is that SAP says they can't distribute the ATL update in their MSM because of licensing issues, but we can sell our software and distribute it freely. Microsoft even create the prereq so that we could distribute it freely. So why can't SAP distribute the required files for their runtime? A lot of people on these threads have wasted a lot of time and money on this issue. Ludek provides great support but maybe this issue needs to be investigated further by development.

Loadlibrary ("olkexpress5.dll") failed - The specified module could not be found.

About a month ago, the Desk Manager app stopped recognizing that my blackberry was connected via usb so I decided to remove/reinstall the Blackberry Desktop 4.3 software. Now, everytime I install the software I receive the following message during the installation:Errors 1904.Module C:\Program Files\Research In Motion\Blackberry\IS71 Connectors\OE Connector\OLKExpress5.dll failed to register. HRESULT-2147024770. Contact your support personnel. If I try to manually register the file it fails with the following error "Loadlibrary ("olkexpress5.dll") failed - The specified module could not be found." My the desktop manager currently will recognize my blackberry as long as I don't disconnect the blackberry before first powering off the laptop. Any one have any ideas regarding this issue?

Perform clean uninstall of BlackBerry Desktop Software.
Check for instruction: http://www.blackberry.com/btsc/KB02206
After that go to here: http://na.blackberry.com/eng/services/desktop/
and download the latest (v4.7) BlackBerry Desktop Software.
I recommend to download BlackBerry Desktop Software without Media Manager.
Media manager is not necessary to transfer files to the device and vice versa.
Check this link: HOWTO : use your blackberry as a USB device

Core DLL failed to load

Suddenly I get the message "CORE DLL" failed to load whenever I try to read an Adobe file. I've removed the program 3 times and downloaded a new download from the Adobe website, but still I get the same result:"CORE DLL" failed to load. Any suggestions?
Thanks

Please See the solution on below link : http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

Load nvgpio.dll fail

Just wondering what 'load nvgpio.dll fail' means every time I click on the MSI Clock in the Properties Menus means? I set the clock values all to default but every time I click on the MSI Clock tab it comes up with that message and I have to reset the clock values back to default. THANKS FOR YOUR TIME!
MSI GF FX 5900 Ultra TD 256MB DDR TV-Out DVI Retail Box with driver version 6.14.10.5216
Pentium 4 2.66
1024 3DRAM
MoBo Micro-Star International MS-6533
Bios: Phoenix AwardBIOS v6.00PG, version: AWARD 42302e31 (07/25/2002)
Realtek AC'97 Audio on board sound
Windows XP Home

Hi Wonkanoby
Thanks for great advice I downloaded driver cleaner and reinstalled the latest drivers 6.14.10.5216 and the MSI Clock thing has gone, it has also improved performance and appearance in my games!
Thanks again!

My laptop will not start - it's telling me that "the logon user interface dll csgina.dll fail to loa

My Laptop will not start - it's a 4 year PC and it's runing on XP.
When I start I get this message" The Logon USer Interface DLL failed to load - Contact your administratoe to replace the DLL or restore the original".
How do I fix so I can start my windows.
Thanks,

Hello -
Try this:
- When you receive the error message that is described in the "Symptoms" section, click Restart.
- Press F8 repeatedly as your computer begins to restart. This triggers the Windows Advanced Options menu.
- Use the arrows on your keyboard to select Last Known Good Configuration, and then press ENTER.
(Also, You can try Safe Mode and do a "System Restore" from there.)
***Last Resort, you will have to edit the registry and this may prevent your computer from booting***
- boot your system and tap away at F8
- Select Safe Mode
- After Windows loads into safe mode.
- Start >> Run >> “regedit” Press Enter.
- Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Winlogon
- Look for the GinaDLL Key
- Select and delete this key and this key ONLY. DO NOT delete the entire Winlogon folder of keys.
- Close Regedit with the RED "X"and reboot the machine
****Although I am an HP employee, I am speaking for myself and not for HP.****
****Click the White Kudos star to say thanks****
****Please mark "Accept As Solution" if it solves your problem****

ClickOnce: Reference in the manifest does not match the identity of the downloaded assembly Office.dll

I have WPF application, which has the excel component reference. I have the deployment issue when i user Office 2007 installed on my server and try to access the application i get Reference in the manifest does not match the identity of the downloaded assembly Office.dll , but when office 2003 is installed there is no issue deplying.
Below is the detail of the issue.
PLATFORM VERSION INFO
    Windows             : 5.1.2600.131072 (Win32NT)
    Common Language Runtime     : 2.0.50727.3082
    System.Deployment.dll         : 2.0.50727.3053 (netfxsp.050727-3000)
    mscorwks.dll             : 2.0.50727.3082 (QFE.050727-3000)
    dfshim.dll             : 2.0.50727.3053 (netfxsp.050727-3000)
SOURCES
    Deployment url            : http://<Server>/VFOLDER/pages.xbap
    Application url            : http://Server/VFOLDER/Application%20Files/pages_1_0_0_3/pages.exe.manifest
IDENTITIES
    Deployment Identity        : pages.xbap, Version=1.0.0.3, Culture=neutral, PublicKeyToken=70c49c4ca21b317d, processorArchitecture=msil
    Application Identity        : pages.exe, Version=1.0.0.3, Culture=neutral, PublicKeyToken=70c49c4ca21b317d, processorArchitecture=msil, type=win32
APPLICATION SUMMARY
    * Online only application.
    * Browser-hosted application.
ERROR SUMMARY
    Below is a summary of the errors, details of these errors are listed later in the log.
    * An exception occurred while downloading the application. Following failure messages were detected:
        + Reference in the manifest does not match the identity of the downloaded assembly Office.dll.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
    No transaction error was detected.
WARNINGS
    There were no warnings during this operation.
OPERATION PROGRESS STATUS
    No phase information is available.
ERROR DETAILS
    Following errors were detected during this operation.
    * [6/22/2009 5:43:31 PM] System.Deployment.Application.InvalidDeploymentException (RefDefValidation)
        - Reference in the manifest does not match the identity of the downloaded assembly Office.dll.
        - Source: System.Deployment
        - Stack trace:
            at System.Deployment.Application.DownloadManager.ProcessDownloadedFile(Object sender, DownloadEventArgs e)
            at System.Deployment.Application.FileDownloader.DownloadModifiedEventHandler.Invoke(Object sender, DownloadEventArgs e)
            at System.Deployment.Application.FileDownloader.OnModified()
            at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
            at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
            at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState)
            at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification notification, DownloadOptions options)
            at System.Deployment.Application.DeploymentManager.SynchronizeCore(Boolean blocking)
            at System.Deployment.Application.DeploymentManager.SynchronizeAsyncWorker()
COMPONENT STORE TRANSACTION DETAILS
    No transaction information is available.
Any one has faced the problem... any help will be very grateful.
Thanks in Advance.
Sunil

Thanks for the reply Robin, here is some of the observation, hope you can provide some solution from your end.
1. When Publish my build, in the Manifest file dependentAssembly has two reference to Office.dll one with version 11.0.0.0 and another with version 7.0.3300.0.
2. In the pages_1_0_0_4 Published folder has one office.dll with version 11.0.5530.0
3. In the root folder of the virtual directory has one office.dll with version 7.0.9466.0
Can you please give your thoughts, what exactly wrong with the deployment, i feel its a assembly mismatch. where in the application files i have set the required assembly. please provide your useful solution.
Thanks in Advance.
Sunil

BR0999E Loading of SQL client library orasql9.dll failed

Hi basis experts,
My SAP system is ECC 5.0 and the RDBMS is Oracle 10.2.0.2.0
I want to use transaction DB13 to make database backups, but it sendme
an error because it can´t connect to the database.
I try to use brtools to make a backup and sendme the error:
BR1001I BRSPACE 6.40 (39)
BR1002I Start of BRSPACE processing: sdvzljqc.dbw 2007-08-23 09.47.42
BR0999E Loading of SQL client library orasql9.dll failed - please check
Oracle configuration
BR0310E Connect to database instance DES failed
BR0700E Fatal errors occurred - terminating processing...
BR1008I End of BRSPACE processing: sdvzljqc.dbw 2007-08-23 09.47.42
BR0280I BRSPACE time stamp: 2007-08-23 09.47.42
BR1007I BRSPACE terminated with errors
BR0292I Execution of BRSPACE finished with return code 3
BR0668I Warnings or errors occurred - you can continue to ignore them
or go back
to repeat the last action
BR0280I BRTOOLS time stamp: 2007-08-23 09.47.43
when I try to use any tool of brtools it sendme the same error all the
time.
I read that maybe I had an incorrect version of brtools, but in market
place I only found DBATOOLS Package for Oracle 9.2.x, this version
will work correctly with my Oracle 10.2.0.2.0????
How can I solve this problem??? Please helpme
Thanks in advance
Tania Rosas

ok,
go get BRTOOLS 7.00, you need that version to use brtools on Oracle 10g databases.
go at http://service.sap.com
entry by application group
SAP NetWeaver
SAP NETWEAVER
SAP NETWEAVER 2004S
Entry by Component
Application Server ABAP
choose proper kernel version (32 or 64-bit unicode or not)
Message was edited by:
Eric Brunelle

Open Procedure for service "BITS" in DLL "C:\Windows\system32\bitsperf.dll" failed

This error is occurring on my Windows Server 2008R2 server with SQL 2008R2 installed. I have found lots of "help" but none of it works...
The Open Procedure for service "BITS" in DLL "C:\Windows\system32\bitsperf.dll" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.
The "help" I have found...
http://technet.microsoft.com/en-us/library/cc774913(WS.10).aspx
http://support.microsoft.com/kb/300956

I was able to re-install BITS. The BITS error seems to have gone away, but this error is now showing...
The object length of an object returned by Extensible Counter DLL "C:\Windows\system32\wbem\wmiaprpl.dll" for the "WmiApRpl" service was not correct. The sum of the object lengths returned did not match the size of the buffer returned. The performance
data returned by the counter DLL will not be returned in the Perf Data Block. The first four bytes (DWORD) of the Data section contains the count of objects.
Help?

NT error: service "Oracle7" in DLL "operfdll.dll" failed

We are running JavaWebServer 1.1.3 on an NT 4.0, SP 3 machine.
There are a number of Java servlets running that access an Oracle
7.3 database on another NT 4.0 machine via the Oracle JDBC driver
and sql*net.
We get the following sequence of errors in the event log,
followed by a Dr. Watson error of an access violation in
the jrew.exe (jws runtime). At this point the web server is
pretty much dead as far as trying to run any servlet.
It's strange because the last error references an Oracle service
and the operfdll.dll, which isn't even on any of the machines
involved. Does anyone have any ideas on this? I saw a thread
on another forum where someone was having the same problem,
but they were using NeXT WebObjects.
The event messages:
1) The description for Event ID ( 0 ) in Source (
\WindowServer.exe ) could
not be found. It contains the following insertion string(s):
warning: can't connect
to the nmserver; is it running?.
Source WindowsServer.exe
2) The description for Event ID ( 0 ) in Source ( \pbs.exe )
could not be
found. It contains the following insertion string(s): warning:
can't connect to
the nmserver; is it running?.
Source \pbs.exe
3) The Open Procedure for service "Oracle7" in DLL "operfdll.dll"
failed.
Performance data for this service will not be available. Status
code returned
is DWORD 0.
Source: Perflib
null

Hotfix loaded but didn't help.
Found a few articles referring to rebuilding the perf counter library. I ran "lodctr /R" failed first time then worked the second time. I believe the errors:
The Open Procedure for service "WDSTFTP" in DLL "C:\Windows\system32\wdstftp.dll" failed
The Open Procedure for service "WDSServer" in DLL "C:\Windows\system32\wdssrv.dll" failed
The Open Procedure for service "WDSMC" in DLL "C:\Windows\system32\wdsmc.dll" failed
Are gone but PXE boot still fails.
Do you think I might have to uninstall WDS and reinstall? "Using SCCM console to just remove PXE"
tconners

Error 1905.module c:\program\files\quicktime\QTOcontrol.dll failed

I'm trying to install itunes version 7. I keep getting this message.
error 1905.module c:\program\files\quicktime\QTOcontrol.dll failed to unregister HRESULT -2147220472. Contact your support personnel.
Anyone know how to fix this?

I got this very same error - I clicked okay twice, which didn't do anything, and then the x button.
The program went on and ended up installing! It seems okay at this point.
Wierd huh?

External DB [SecurID.dll]: Failed to load 'aceclnt.dll'

Hi all,
ACS refuse to start, possibly after windows 2000 upgrade. The error message in the csauth log is :
ADMN 05/05/2006 08:42:11 E 0360 1824 External DB [SecurID.dll]: Failed to load 'aceclnt.dll'
ADMN 05/05/2006 08:42:11 E 0547 1824 AuthenLoadLibrary: DLL for RSA SecurID Token Server initialization function failed
ADMN 05/05/2006 08:42:11 E 0028 1824 Exception trapped at D:\ccData\snapViews\Snap_rgoren_matis-build11@ismg_israel_acs@ACS-B-394\ismg_israel_acs\Acs\DZAuth\authentication_common.c:631 [Exception trapped in AuthenLoadSupplier]
I have try to suppress windows update, but the problem is always here, this services refuses to start :
* csradius
* cstacas
* csadmin
* csauth
Any ideas ??

Hmm, the exception definately shouldnt happen - no matter what else may have occurred on your machine.
Have you ever used the RSA authenticator? The aceclnt.dll is supplied by RSA and installed into system32 when you install the RSA client tools CD.
If yes, its possible the OS upgrade managed to nuke the DLL accidentally. ALthough the error message "Failed to load aceclnt.dll" is actually quite normal. I get this and dont have RSA support installed.
I think this will require a call to the TAC as you probably need a developer to track the crash... the sort thing I used to do!
Darran

Importent6.dll fails to register on WTS (Citrix & Windows 2003 64bit)

Hi,
I am trying to install the BOE XI 3.1 client tools on a 64bit Windows 2003 R2 SP2 machine (used as Windows Terminal Server) and I get the message that importent6.dll and exportSDK.dll fail to register during the installation.
Did anyone of you out there had a similar problem so far? Due to the error I cannot get the import wizard installed.
Additionally it would be interesting to know if it is possible to use the import wizard XI 3.1 as a terminal server application in a WTS (64bit) environment.
Regards,
Stratos

Hi,
with regards to the "(x86)" folder i would not recommend installing the BOE Client Tools into that folder. Please create a own Folder (you can for sure do this on drive D:) and install it into the folder. You could create a "Program Files" folder instead of installing it into the "Program Files (x86)" Folder.
About the Errormessage of your .dll`s please check SAP Note - 1205687
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3132303536383726
About Windows7. Windows7 is only supported since SP3. Please use the SP3 Fill Build setup routine for the BOE Clients for installing on Windows7.
Regards
-Seb.

Download of webutil-DLLs fails

Similar Messages

Maybe you are looking for