Getting "querypanel.dll failed to register" on Windows 7 32 bit machine

Trying to move from CR 2008 SP2 to CR 2008 SP3.
For the CR 2008 SP2 version of our application, which runs our Crystal .rpt files, we used Visual Studio 2005.  we then created a Visual Studio .msi file, using the merge module (CRRuntime_12_2), to install this application on a target machine that had .NET Framework 2.0 and VC++ Redistributable 2005 SP1 installed. If these two latter prerequisites were not installed, our install would fail because the CEReportSource.dll could not be registered.
After installing CR SP3 on my development machine, we created a new Visual Studio project, again using Visual Studio 2005. I used CRRuntime_12_3 as the merge module and everything else was the same.
I was getting this same error message "CEReportSource.dll failed to register" when I attempt to install the SP3 version of the app on the very same machine on which I previously successfully installed the SP2 version. I found an answer in these forums to install Microsoft Visual C++ 2005 SP1 update. Even this did not help. When I installed  MS VC++  2008 Redistributable - x86 9.0.30729.17, finally the problem of "CEReportSource.dll failed to register"  went away on XP and Vista machines.
Now I am trying to install my program on Windos 7 32 bit machine and I get "querypanel.dll failed to register".
Q1. By installing S VC++  2008 Redistributable - x86 9.0.30729.17, the problem of "CEReportSource.dll failed to register" did not occur. Is this the right thing to do. I am not sure why VC++ 2005 SP1 did not fix the issue.
Q2.What do we need in order to prevent "querypanel.dll failed to register" error on Windows 7 32 bit machine.
Thanks for your time.

Moved to .NET SDK forum.
Search here, lots of info on distribution. Likely caused by MS updated the C++ runtime to include security updates. Go to MS's site and download the latest C++ distribution package with enhanced security.
If you use the CR MSI package rather than the Merge Modules it should work.
Thank you
Don
Edited by: Don Williams on Nov 9, 2010 2:16 PM

Similar Messages

  • When I invoke Itunes I get an "error 7 (Windows 193)" message. I have reinstalled twice and get the same message. I have Windows 7 64 bit machine. Can someone help?

    When I invoke Itunes I get an "error 7 (Windows 193)" message. I have reinstalled twice and get the same message. I have Windows 7 64 bit machine. Can someone help?

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Importent6.dll fails to register on WTS (Citrix & Windows 2003 64bit)

    Hi,
    I am trying to install the BOE XI 3.1 client tools on a 64bit Windows 2003 R2 SP2 machine (used as Windows Terminal Server) and I get the message that importent6.dll and exportSDK.dll fail to register during the installation.
    Did anyone of you out there had a similar problem so far? Due to the error I cannot get the import wizard installed.
    Additionally it would be interesting to know if it is possible to use the import wizard XI 3.1  as a terminal server application in a WTS (64bit) environment.
    Regards,
    Stratos

    Hi,
    with regards to the "(x86)" folder i would not recommend installing the BOE Client Tools into that folder. Please create a own Folder (you can for sure do this on drive D:) and install it into the folder. You could create a "Program Files" folder instead of installing it into the "Program Files (x86)" Folder.
    About the Errormessage of your .dll`s please check SAP Note - 1205687
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3132303536383726
    About Windows7. Windows7 is only supported since SP3. Please use the SP3 Fill Build setup routine for the BOE Clients for installing on Windows7.
    Regards
    -Seb.

  • Module C:\Windows\CCM\StatusAgentProxy.dll failed to register. HRESULT -2147010895 Problem installing sccm 2012 client

    Hi,
    I am getting the following error, detailed in the client.msi.log, when trying to install the SCCM 2012 SP1 client on windows 2008 R2 servers.Why StatusAgentProxy.dll fails to register.
    <![LOG[MSI: Action 22:08:03: RegisterTypeLibraries. Registering type libraries]LOG]!><time="22:08:03.092-330" date="12-18-2013" component="ccmsetup" context="" type="0" thread="8096" file="msiutil.cpp:314">
    <![LOG[MSI: Action 22:08:03: SelfRegModules. Registering modules]LOG]!><time="22:08:03.827-330" date="12-18-2013" component="ccmsetup" context="" type="0" thread="8096" file="msiutil.cpp:314">
    <![LOG[MSI: Module C:\Windows\CCM\StatusAgentProxy.dll failed to register.  HRESULT -2147010895.  Contact your support personnel.]LOG]!><time="22:08:03.889-330" date="12-18-2013" component="ccmsetup"
    context="" type="3" thread="8096" file="msiutil.cpp:300">
    <![LOG[MSI: Action 22:08:03: Rollback. Rolling back action:]LOG]!><time="22:08:03.952-330" date="12-18-2013" component="ccmsetup" context="" type="0" thread="8096" file="msiutil.cpp:314">
    <![LOG[File C:\Windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text:
    ExitCode: 1603
    Action: SelfRegModules.
    ErrorMessages:
    Module C:\Windows\CCM\StatusAgentProxy.dll failed to register.  HRESULT -2147010895.  Contact your support personnel.
    I've already checked this forum but nothing helped .
    Please provide a valid action plan to resolve this issue.
    I'd highly appreciate any help.
    Thanks and regards
    Arsalan

    Hi,
    Restart those server might be helpful.
    After installing the Client manually, you could check the registration of statusagentproxy.dll in that log.
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • CR for VS2010 deployment - crtslv.dll failed to register

    I'm still having problems with packaging up the CR for VS2010 library with our applications installation.
    I'm using InstallShield 2011 for the installation setup.
    I've included the CRRuntime_13_0.msm file. (That is the only MSM file I included, are the others needed also?)
    I've included the Microsoft Visual C++ 2005 SP1 Redistributable Package (x86 and the x64 versions.)
    I have tried to do a test install on both a 64bit and a 32bit Windows 7 computer and it keeps giving me the crtslv.dll failed to register error on both computers.
    Error 1904.Module C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crtslv.dll failed to register.  HRESULT -2147010895.  Contact your support personnel.
    I thought it might just be due to the 32 bit MSM causing the problem on the 64bit computer, but I can't even get it to install on a 32bit computer. (On the 32bit computer install, I even removed the x64 bit version of the MS C++ 2005 Redistributable from the installation setup just to make sure it wasn't causing a problem).
    I have even tried having my Install Shield setup 'Chain' the CRRuntime_32bit_13_0.msi file to my main installation (not using the Merge module). Even when that runs, it produces the same crtslv.dll failed to register again.
    BUT, if I run the CRRuntime_32bit_13_0.msi manually on the computer it installs correctly. (I even tried using the same /qf parameters that InstallShield is using on it and it also worked OK that way.)  So I can't figure out how to get it to run in conjunction with my InstallShield installation.
    Can anyone give me any suggestions?
    Mike...

    I finally got past this issue and got things to install, with a few hackish work-arounds.
    First the CR13 msm redistributable appears to requre the 32 bit version of "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security" that you'll read about in every post.  On 64 bit machines I found that even when it was installed,I would still get a crtslv.dll failed to register message, followed several other dlls not registering.  Once I installed the 32 bit version on the 64 bit OS, the crystal 13 redistibutable installed fine everytime.  I did this on several 64 bit VMs all running Server 2003,XP, and Windows 7.  It ran fine every time.
    The problem you'll face is how do you install the 32 bit version of this ATL security pack on a 64 bit machine.  You may be able to download and run the 32 bit version from Microsoft's site with the link Ludek has posted.  That wouldn't work for me because I had to distribute it with my software so I used the prerequisite available for InstallShield.  The prereq however is designed to only run on 32 bit machines, so I edited it in InstallShield and modifed the conditions to allow it to run on both 32 & 64 bit operating systems. 
    The next problem encountered is that this 32 bit prereq getting installed on a 64 bit machine will result in an error being returned that the installation appears to have failed.  Well it is a 32 bit installation not intended for a 64 bit OS and we're not supposed to do that.  I did say hackish work-around.  The 32 & 64 bit files are installed to different directories and the 64 bit version does not get overwritten.   If you check the event viewer you'll see a message logged in that the installation of the ATL prereq completed sucessfully.  So I modified the behavior of the prereq in InstallShield to "continue the setup if the condition still indicates it is required after completion".  Now it runs without error and everything for Crystal installs sucessfully.
    The final problem was also with the pre-requisite.  The code determines if it is already installed by looking for the file:
    [WindowsFolder]\WinSxS\x86_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_473666fd\ATL80.dll
    I found on some machines it was previousy installed to:
    [WindowsFolder]\WinSxS\x86_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.4053_none_d1c738ec43578ea1\
    This results in the prereq being required every time because the file it's checkig for is not found.  Furthermore, it fails every time, most likely because it's alreday installed and not supposed to be installed again.  So once again, I modified the prereq conditios in InstallShield and made it look for the file in both locations to determine if it was installed.
    I haven't seen any problems since with either the Crystal runtime or the ATL update.  Happy day.
    The part I stll don't understand is that SAP says they can't distribute the ATL update in their MSM because of licensing issues, but we can sell our software and distribute it freely.  Microsoft even create the prereq so that we could distribute it freely.  So why can't SAP distribute the required files for their runtime?  A lot of people on these threads have wasted a lot of time and money on this issue.  Ludek provides great support but maybe this issue needs to be investigated further by development.

  • Client installation: MsiHandler.dll failed to register. HRESULT -2147024769

    Due to a company merger, I had to move approx 200 clients from a SCCM 2012 R2 site to a SCCM 2012 SP1 site. I did this by uninstalling all clients, uninstalling the SCCM 2012 R2 site, cleaned up, set up boundaries and AD publishing on the SCCM 2012 SP1 site,
     then changing the SCCM SUP GPO to point to the new SUP.
    Almost all clients successfully installed the agent and assigned to the new site , expect for 4.
    I have tried:
    ccmclean.exe
    http://sccmclictr.codeplex.com/ (Reset DCOM permissions, Register common DLL's, Reset WMI Repository, Repair Agent)
    None of these helped
    ccmsetup.log
    <![LOG[MSI: Module C:\Windows\CCM\MsiHandler.dll failed to register.  HRESULT -2147024769.  Contact your support personnel.]LOG]!><time="12:34:13.529-60" date="11-26-2013" component="ccmsetup" context=""
    type="3" thread="3852" file="msiutil.cpp:300">
    <![LOG[MSI: Action 12:34:13: Rollback. Rolling back action:]LOG]!><time="12:34:13.639-60" date="11-26-2013" component="ccmsetup" context="" type="0" thread="3852" file="msiutil.cpp:314">
    <![LOG[File C:\Windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text: ExitCode: 1603
    Action: SelfRegModules.
    ErrorMessages:
    Module C:\Windows\CCM\MsiHandler.dll failed to register.  HRESULT -2147024769.  Contact your support personnel.
    ]LOG]!><time="12:34:18.014-60" date="11-26-2013" component="ccmsetup" context="" type="3" thread="3852" file="msiutil.cpp:872">
    client.msi.log
    CustomAction +MsiHandler_dll.EDFC37A5_EC0F_4170_9D99_8A7F441C1017 returned actual error code -2147024769 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (E0:48) [12:34:13:529]: Product: Configuration Manager Client -- Error 1904. Module C:\Windows\CCM\MsiHandler.dll failed to register.  HRESULT -2147024769.  Contact your support personnel.
    Error 1904. Module C:\Windows\CCM\MsiHandler.dll failed to register.  HRESULT -2147024769.  Contact your support personnel.

    Hi Jason,
    Thank you for your reply.
    Correction, there are 3 affected systems. One is a Windows Server 2003 SP2 32-bit, the last two are Windows Server 2008 R2 SP1. All three have the same error.
    The msihandler.dll is extracted from the client.msi during installation to the C:\windows\ccm folder. When the installation fails, it rolls back and deletes the CCM folder. But I was able to get a copy of the msihandler.dll file, and tried registering it
    manually, which failed with a general error that the specified module could not be found. I also copied the file from a working system, but it still failed.
    The Windows app event log reflects the same error during MSI installation as the log files.
    The systems does have SCEP from the previous SCCM site installed and running. I uninstalled it on of the the VMs and rebootet, but SCCM client installation still fails with the same error.

  • How do I fix this error: Module C:\Program Files\Bonjour\mdnsNSP.dll failed to register. HRESULT -2147024769. Contact your support personnel.

    I am trying to install iTunes, and get this error: "Module C:\Program Files\Bonjour\mdnsNSP.dll failed to register. HRESULT -2147024769. Contact your support personnel."
    Any ideas on how to fix this error, or get the install to comlete?

    *complete...

  • DTSAGENT.DLL failed to register when trying to install CRRuntime_32bit_13_0_7

    Hello together,
    maybe some can help me with an installing issue with CRRuntime_32bit_13_0_7.
    When i try to run the setup i get the error:
    Error 1904. Module C:\Program Files\SAP BusinessObjects\Crystal
    Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dtsagent.dll failed to register.
    HRESULT -1073741819. Contact your support personnel.
    I found something following the link: http://scn.sap.com/thread/1948999 but it didn´t really fix my problem. I think it´s a problem with the constellation of McAfee that is also using the dtsagent.dll
    I welcome each comment, feedback and each suggestion which could help me to fix this problem.
    Thanks
    Chris

    Hi Chris,
    This issue has been discussed many times before. Please use the top right corner search box.
    I searched for "error, 1904, install, crystal, visual studio" keywords and here are the results.
    http://search.sap.com/ui/scn#query=error%2C+1904%2C+install%2C+crystal%2C+visual+studio&startindex=1&filter=scm_a_site%28scm_v_Site11%29&filter=scm_a_modDate%28*%29&timeScope=all
    - Bhushan
    Senior Engineer
    SAP Active Global Support
    Follow us on Twitter
    Got Enhancement ideas? Try the SAP Idea Place
    Getting started and moving ahead with Crystal Reports .NET applications.

  • Not able to register DCOM 32 bit component on Windows 7 64 bit machine

    Hi,
    I need to register a 32 bit delphi component on windows 7 64 bit machine as part of migration of my aplication from windows XP to win 7. After i register the necesary dll's and then run the DCOM exe or try reistering it from running DCOMexe\regserver.. I
    am not able to find it under DCOMcnfg.
    I also ran the dcomcnfg from syswow64 folder but still not able to see the DCOM exe under Dcomcnfg.
    Please help me out how to register the dcom exe in win 7.
    Thanks iun advance

    Hi,
    Do you mean to enable DCOM on Windows 7?
    If yes, please take a look at the following article, take a try to enable DCOM:
    Enable or Disable DCOM
    And please note: Component Services is no longer in Administrative Tools. To open Component Services, click     
    Start. In the search box, type dcomcnfg, and then press ENTER.
    Hope this may help
    Best regards
    Michael Shao
    TechNet Community Support

  • I have an ipod touch 5th gen. i first loaded itunes on a windows 7 64 bit machine. i then got a new windows 8 64 bit machine but itunes will not load on it. i keep getting 2503

    i have an ipod touch 5th gen. i first loaded itunes on a windows 7 64 bit machine. i then got a new windows 8 64 bit machine but itunes will not load on it. i keep getting 2503 & 2502 errors. some apple software loaded, but it will not let me uninstall it from the machine. any thoughts, about how to get itunes to run on my machine?

    Try:
    Trouble installing iTunes or QuickTime for Windows
    Next try posting in the iTunes forum

  • Cannot get Photoshop Elements 10 Trial to Install - Windows 7 64-bit

    Hi,
    I cannot get Photoshop Elements 10 Trial to Install - Windows 7 64-bit.  I downloaded the trail of Photoshop CS6 just fine.  I am trying to download the trial of Photoshop Elements 10.  I get the adobe installer window and I login in and select my PSE 10 Trial and the installation begins and I have it saved to my desktop.  When the installation finishes nothing happens.  There is a Photoshop Elements folder on my desktop but it is empty.  I have tried a couple of time with the same result.
    Any suggestions?
    Thanks.

    Hi Ken,
    I apologize for not making myself clear.  What I meant by "saving to desktop" was when I I went to download the the trial of PSE 10 the install window will ask me where I want to save the file.  It is defaulted (highlighted) to save to "my documents" but I selected to save the file to my desktop.  I tried to install the trial of Photoshop Elements 10 again and this time it did install and is working.
    Thanks again for responding.
    ClearInk8

  • MAXDB installation fails for ABAP WAS trial on Windows 7, 64 bit machine

    Hi Experts,
    I downloaded the Trial ABAP WAS from SDN's download section. I am trying to install it on Windows 7 64 bit machine.
    It.
    It fails to execute: <...\NWASABAPTRIAL70206\MAXDBTOOLS\maxdb-studio-desktop-win-32bit-i386-7_8_01_16\SDBINST.exe>
    It tries to execute for Windows 32 bit but the machin in 64 bit so it gives error.
    DId anyone face such issue? How to resolve this for successful installation?
    Regards,
    Daman

    In my Windows 7 64 bits the version with following link is ok.
    [SAP NetWeaver AS ABAP 7.02 SP6 64-bit Trial|http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/1048e401-ab3d-2e10-4d84-b9f27339c54b]
    For me the maxdb studio in the archive is ok for install.
    Edited by: Jerome Moutreux on May 3, 2011 8:13 AM

  • Need help getting Adobe OnLocation CS3 to work with windows 7 64 bit. Any ideas?

    Need help getting Adobe OnLocation CS3 to work with windows 7 64 bit.  The program installed ok and the S/N took.
    The program does record video and audio HDV M2T.
    The problem is video doesn't display or play back on the monitor component @ 16:9 or 720 p.  4:3....
    The scopes respond as do the audio components when recording. (with a blank monitor component).
    The video does play back on my system no problem.
    Any ideas?
    Dan

    Moving the discussion to OnLocation
    Thanks,
    Atul Saini

  • Windows 7 64 Bit machine with Instant Client and 32Bit application

    Hello everybody,
    the last days a tried to get a 32Bit application to run on a Windows 7 SP1 64 Bit machine ... unfortunately with no success. The application runs on XP Pro and Vista Pro 32 Bit machines against a 11g RDBMS for years. As a refenence we use SQLTools from sqltools.net. It has nearly the same behaviour like the application, because it is a 32 bit application too.
    First thing was to install a 64 bit environement to verify if the connection is allright.
    - Downloaded instantclient-basic-windows.x64-11.2.0.2.0.zip an instantclient-sqlplus-windows.x64-11.2.0.2.0.zip
    - Unpacked both packages into C:\oracle so that they reside in C:\oracle\instantclient_11_2
    - Made a directory C:\oracle\tnsnames with tnsnames.ora in it, because the app uses it
    - Set the environement variables TNS_ADMIN to point to C:\oracle\tnsnames and added C:\oracle\instantclient_11_2 in front of the path variable
    - Restarted the machine
    - Opened a commnd shell and startet sqlplus user/password@sid
    Everything was allright, I was able to connect to the database as expected
    Second thing was to start SQLTools, but as I feard it quitted with an error message when trying to access oci.dll of the instant client.
    So i decided to switch to a 32 bit environement as a third thing.
    - Downloaded instantclient-basiclite-nt-11.2.0.2.0.zip and instantclient-sqlplus-nt-11.2.0.2.0.zip
    - Deleted the old C:\oracle\instantclient_11_2
    - Unpacked both 32 bit packages into C:\oracle so that they reside in C:\oracle\instantclient_11_2
    - Didn't change anything in the environement, because nothing changed from the view of the system
    - Opened a commnd shell and startet sqlplus user/password@sid
    But now I wasn't able to connect and got the following error
    ORA-28547: connection to server failed, probable Oracle Net admin error
    SQLPlus was able to start now, but when trying to connect to the database I got the same error like when connecting with sqlplus.
    Does anybopdy have an idea how to manage to get a 32 bit application to run on a Windows 7 64 Bit machine?
    Thanks in advance
    My packages:
    Windows 7 64 bit SP1
    Oracle Instant Client basic lite 11.2.0.2.0
    SQLPlus 1.5 22D

    Have you tried WOW64 ? I have not used this emulator for sqlplus but it works for other 32 bit applications.
    http://msdn.microsoft.com/en-us/library/aa384249%28v=VS.85%29.aspx
    Thanks

  • Issue with OBIEE 11.1.1.5.0 Installation on Windows 2008 64-bit machine

    Hi
    I'm following the below steps to install OBIEE 11.1.1.5.0 Installation on Windows 2008 64-bit machine. However the installation is unsuccessful as it fails at the "Domain Creation" step. It would be very helpful and greatly appreciated if any workaround is provided. Thanks!
    1.JRockit Windows 64 bit Version jrockit-jdk1.6.0_24-R28.1.3-4.0.1-windows-x64
    2. Oracle 11G Database
    3. RCU Installation
    4. WebLogic 10.3.5.0 Generic Version
    5. Weblogic patch
    6. OBIEE 11G 64 bit version (11.1.1.5). Software only
    7. Execute Configure.bat in :\Middleware\Oracle_BI1\bin
    Thanks

    Hi,
    Kindly refer my blog link:
    http://obieeelegant.blogspot.com/2011/10/windows-7-home-premium-edition-is-not.html
    from exp..with obiee11g installation with win 7 64bit i have face so many issues..
    http://obieeelegant.blogspot.com/2011/09/obiee-11g-111150-software-only.html
    obiee11.1.1.5.0(Software Only Install) windows 7  64bit Installation Error
    OBIEE11g software only install configuration get hangover on win 2008 64
    ==========
    Note: some time it works with simple install option then rebooting mechine/restarting mechine it's not working.then i had OWC and discussed with MY Oracle Support team...they confirmed it's not support. please refer the certification matrix excel file in my blog link
    Hope it's clear...
    Thanks
    Deva
    Edited by: Devarasu on Nov 25, 2011 11:18 AM

Maybe you are looking for

  • Reconciliation Account change to GL.

    Hi I have a reconciliation account, I Viewed this on FS00. Now the balance carryforward to account AB1 cannot be transferred to AB2 due to wrong setting of account AB1 as "Asset" Reconciliation account. Heres the problem, When I tried to change the R

  • Open document in BO R 3.1 Issues

    Hi Experts        I have a issue that is: I can open child report via a hyperlink in BO 3.1 From parent report but problem is: If i use "sWindow=New"  then the report is opened to another window not another tab.... In BO R 2.0 report opened in  a new

  • PO message type Error

    Hi All I have configured a new message type ZCTL for EDI. however i find all configs in place still i get an error of NO COMMUNICATION DATA MAINTAINED FOR TRANSMISSION MEDIUM 6. I have checked MN06 for the key combinations and it maintained correctly

  • Cannot push back new calendar events to Mac, duplicate calendars, more...

    I'm having tons of issues with iCal and my iPhone since 2.1. New events entered on my iPhone show up in MobileMe online, but not on my Mac, ever. Duplicate calendars are starting to show up in my iPhone, and now NONE of my calendars are showing up in

  • Warp Stabilizer bug in new Premiere update

    Made the mistake of updating mid-project. Now Premiere warp stabilizer isn't working and causes rendered frames to flicker to black. Tried the stabilizer on new projects with same results. Contacted tech support and they said "this is being rushed to