Downloaded Mt Lion Yesterday and my Tool bar has disappeared. I can still access the individual tools but cannot see my header. I used 'help' and did what it suggested. slected 'hide tool bar' and then 'show toolbar'. I also restarted etc.

Good point BDAqua, the Escape key helps get me back to reality in Lion.
While I've only dabbled around a little in Lion since it's release (I upgraded a 10.6 Clone to Lion on one of my FireWire Drives) now I'm currently downloading Mountain Lion (to upgrade a Clone of that Lion Clone) so that now I can continue to move forward in madness.
P.S. Trust me, I'm not laughing.

Similar Messages

I cannot add a Wi-Fi guest network. Gone to Utilities Airport Utilities and all get is an image/browser of my Airport Extreme. Looking for the browser which has the title Wireless but cannot find anywhere. I need help?

I cannot add a Wi-Fi guest network. Gone to Utilities>Airport Utilities and all I get is an image/browser of my Airport Extreme. Looking for the browser window which has the title Wireless but cannot find anywhere. What am I doing wrong?

Open AirPort Utility. The first screen looks something like this:
Click on the AirPort Extreme and another screen will appear. Click Edit, then the window with the Wireless tab will appear.
If you do not see these screens, you will need to start over and configure your AirPort again.

Do you have experience that you can connect to the cRIO-9104 but cannot donwload the program to the RT engine and FPGA?

I can connect the cRIO-9104, I view it in MAX can it shows the cRIO-9104 is connected, but when I open the LabVIEW and want to download the program to the RT engine, it shows "Wait the RT egine to resopnse" and it shows fail to connect the cRIO-9104 later.
May you give me some guidelines on how to deal with it? Should I try rebooting the cRIO-9104 in the MAX?
Thank you!

Hi
With reference to MAX try to transfer a file from your pc to your controller. What appears as a tolerant program (MAX) might actually reveal that it isn't.
Also
If you don't update (F5) the Max menu then it recalls a previous set up!!
Regarding the wireless router, I suspect that MAX has a lower default baud rate than Labview, so downgrading LV to 9600bps could actually increase the range ( if required)
has the 9104 controller a RS232 connection? If so then run Hyper terminal and connect to the controller. Reseting the controller ( reset button) should then reboot the system , Hyper terminal program would then reveal what applications programs are loaded on the controller(9104)
Hope that helps
xseadog

I updated my IPhone today and now I cant make phone calls. I can still access the internet and sending texts, help.

I updated my Iphone today and now I cant make phone calls. I cant still send and receive texts and access the interenet.

reset iPhone if you haven't already
http://support.apple.com/kb/HT1430
essential after any update

I downloaded mountain lion yesterday and it works fine

i just want to say the new photos ROCK!!!
I'm sitting here watching for the next one to come up
an unexpected pleasure
thank you apple
Rina

Why do you think Mountain Lion is a disaster? Perhaps you could explain what problems you are having?
You cannot reinstall Snow Leopard unless you have the proper installer disc for your computer. You will need to wipe your drive in order to install Snow Leopard.
Boot from the Snow Leopard disc.
After you select your language select Disk Utility from the Utilities menu in the menubar at the top of the screen.
User Disk Utility to erase your hard drive.
Quit Disk Utility to return to the installer.
Install Snow Leopard.
Update Snow Leopard by downloading and installing the Mac OS X 10.6.8 Supplemental Update.
You cannot reinstall Lion at this point unless you have kept a copy of the Lion installer application or can re-download the installer from your previous purchases in the App Store.

I am new to ipad and iphoto. I edited a photo and then selected undo, to return it to the original. Now there is a spinning disk on the screen and the program is frozen. What can I do now? I can still access the same photo through the camera roll.

I am new to ipad and iphoto. I edited a photo and saved it. Then used "undo" to change it back. The thumbnail shows the edited version and the larger window shows the original version. There is a whirling disk over the orginal version as if the program is stuck saving the reversion back to original. None of the other features will work. Turning it off doesn't help. leaving it on indefinetely so it will "complete saving" doesn't work. I don't have some of the keys and choices outlined with other posts about stuck iphoto on Macs. Any help would be appreciated.

Quit the app completely and reboot the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Power LED flashes, firmware updates good, and can still access the router

I have a wrt54G first version as there is no version number. About two months ago, the power led started dropping out and with a reset worked for a day or so, then, it became worse, every hour, and now only a couple of minutes. according to the help side of this site, the router will not be accessible, but it is. I upgraded to the 4.7.1.1 firmware, the problem continues, un plug and start it up. Any ideas? Could it be the 12 volt power supply going bad or over shooting the power?

yes, that is the level, verified at the router. the help side of this site says that if the led flashes like this that it would be corrupt an un accessible, but a restart of the router stops it, and it is accessible, moreover, the upgrade fails since that is the level at the router. just that it is happening about every 15 minutes (8/3) - could it be that comcast is sending packets of ??? to blow out routers? Thee state they don't like people using routers - that you are not supposed to use more than one computer with their broad band connection. Yes - serious, the e have said this twice in the last 6 months. Don't know what it could be, Saturday - Sunday it has not dropped out at all

I dropped my iphone 4S and the screen is black. i can still hear the key sound but i can't see a thing.

My iphone 4s was dropped and i cant see a thing but still can hear the sound of the keys...

I would try restarting
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost).
If that doesnt do it take the phone to an apple store and have it assessed

I can not access the Itunes store. It will show me half of a progress bar and then diappear, and nothing comes up.

I have already tried uninstalling, and reinystalling everything with Itunes in the ordered specified by Apple Support, and yet still no change. I made sure it was allowed through Firefox, and everything checks out.....I'm stumped. My only other thought is...I am wondering if it has to do with me installing Spotify. Anyone have a clue?

I tried turning off my accelerators, and still no change. I also tried to repair I tunes....no change.......I can update my ipods and do EVERYTHING else.....I just cant access the store. I tried something else today...dont remember exactly what it was, lol...but I got a message that said Itunes wasnt connected to the internet...so at least I know what the problem is....I just wish I could fix it..............

Can I download a free exercise video to my computer (not from Itunes)and then to my ipod nano, and then show it on my tv, and if so how?

Can I download a free exercie video (not from Itunes) to my computer, then to my ipod nano, and then show it on my tv?

If you have a compatible video file, you can add it to your iTunes library by dragging it to the iTunes window, or by using the command
iTunes menu bar -> File -> Add to Library...
If the video is in a format that iTunes can play, it should be imported and appear as a new item in the iTunes Movies library.
It may not be playable on the nano directly, because of its format. For example, if it's "HD," the resolution is too high for a nano's screen. If it plays in iTunes, but not on the nano, you can use the command to covert it. Select the item in a list and then
iTunes menu bar -> File -> Create New Version -> Create iPod or iPhone Version
That version should play on an iPod nano. NOTE: Some videos downloaded from the iTunes Store cannot be converted to a lower resolution format, because they have DRM (copy protection).

So my iphone4 wouldn't turn on and wouldn't show the charge bar well now it's on but cannot see anything on screen it's dark what's wrong?

So my iphone4 wouldn't turn on and wouldn't show the charge bar well now it's on but cannot see anything on screen it's dark what's wrong?

Press and hold the home and power button together for about ten seconds, wait, then press the power button for about 2 seconds, or until it turns on.

I started to download OS X Maverick and then I paused download I went to resume download and now it will not continue downloading any advice

I started to download OS X Maverick and then I paused download I went to resume download and now it will not continue downloading any advice

First read Mac App Store: How to resume interrupted downloads
Open the Mac App Store.
From the Store menu, choose Sign In.
Enter your Apple ID and password.
Click Purchases to get to your Purchases Page.
Click the Resume button next to the app name.
Also read: Troubleshooting the Mac App Store

I downloaded a ringtone yesterday and set it as my default ringtone. Today it is gone and I need to know how to find it or download it again without having to pay for it for a third time......

I downloaded a ringtone yesterday and set it as my default ringtone. Today it is gone and my ringtone is the standard default that came with the phone. I cannot find the ringtone in my settings and I don't want to have to pay for a ringtone for the third time. The ringtone does show up in my purchased file in itunes. How do I download it again?

http://support.apple.com/en-us/HT204076

I have downloaded infinity blade 3 and then deleted it because i wanted to install some other apps. but now i am trying to install the game again but its saying error 0xE8000004. I have about 6.5 GB space on my iPad. what should i do..

I have downloaded infinity blade 3 and then deleted it because i wanted to install some other apps. but now i am trying to install the game again but its saying error 0xE8000004. I have about 6.5 GB space on my iPad. what should i do..

These might help
http://support.apple.com/kb/TS3221
http://support.apple.com/kb/TS3694

I had OS Maverick and downloaded OS X Yosemite and then cleared the mistakenly cleared the hard-drive while trying to re-download OS Maverick and now should I re-download OS X Yosemite in attempts of getting the pictures, videos, and documents back?

I had OS Maverick and downloaded OS X Yosemite and then cleared the mistakenly cleared the hard-drive while trying to re-download OS Maverick and now should I re-download OS X Yosemite in attempts of getting the pictures, videos, and documents back?

No; try using a data recovery product such as the ones listed here. Don't write anything else to the drive until the files are recovered or you choose not to recover them.
(120682)

Downloaded Mt Lion Yesterday and my Tool bar has disappeared. I can still access the individual tools but cannot see my header. I used 'help' and did what it suggested. slected 'hide tool bar' and then 'show toolbar'. I also restarted etc.

Similar Messages

Maybe you are looking for