Downpayment doubts
Hello Professionals,
I just need some help to clarify the following:
1. Can downpayment or its partial/full invoice be made with a Periodic billing plan or can only be with Milestone billing plan?
2. when downpayment is received in FI department, a downpayment request is created to settle it but will not yet clear it until the printing of the 1st partial invoice? If so, can i know the rationale?
3. is it that downpayment can be made a 2nd time to increase or decrease the downpayment amount paid in total and if there is still outstanding downpayment, this sum can be cleared together with the final invoice?
So, when downpayment is not yet fully cleared, the partial invoice and final invoice and be processed also?
4. If downpayment can be made 2nd time, how many times can downpayment be processed or made? Not fixed rule right?
best regards
Pascal
1. Can downpayment or its partial/full invoice be made with a Periodic billing plan or can only be with Milestone billing plan?
- Normally with milestone billing
2. when downpayment is received in FI department, a downpayment request is created to settle it but will not yet clear it until the printing of the 1st partial invoice? If so, can i know the rationale?
- First the downpayment request is printed and sent to customer (billing document type FAZ). Against this document only, customer will make payments.
3. is it that downpayment can be made a 2nd time to increase or decrease the downpayment amount paid in total and if there is still outstanding downpayment, this sum can be cleared together with the final invoice?
So, when downpayment is not yet fully cleared, the partial invoice and final invoice and be processed also?
Per SAP documentation (http://help.sap.com/saphelp_47x200/helpdata/en/14/c8af5ad21411d2acc70000e8a5bd28/frameset.htm under payments made) if partial payment only made for downpayment, still it is considered as cleared. This means for the balance payment, user needs to manually enter as further downpayment request at the line item level.
4. If downpayment can be made 2nd time, how many times can downpayment be processed or made? Not fixed rule right?
- Again point 3 answers this question. By the way, if the business makes a contract with the customer for downpayment and milestone billing plans, then it is NOT normal that there are many partial payments for down payments.
Regards
Similar Messages
-
Hi all,
I have a doubt about downpayment procedure in FA. We have created a note item as a downpayment in a vendor.
This vendor has a PO assigned to a WBS element which is assigned to a asset under construction. When we run the WBS Settlement this donpayment was posted to the Asset under construction with transaction type 180 (Downpayment). This was in May.
In june the user realize that this note item (Downpayment) was wrongly posted to this place, it will never be paid. They are waiting the invoice to be posted and pay.
The user cancelled the downpayment with FB08. But when we are nunnig the settlement of the WBS in june no reversal is poted in FA with transaction type 181.
What is missed or wrong to post the cancellation of the downpayment into the Asset under construction? What is wrong in the scenario?
Thanks for your kind help.
Regards,
Adela.Hi,
Down payment request against WBS (F-47) cant be moved to AUC. Only advance payments (F-48 ro F110) Can be moved to AUC provided required config maintained. if you reverse the advance payment document after the settlement, the same will get credit in WBS and the it will be transfered to AUC as Credit in the next settlement run. Transaction type 181 will be used in the reversal.
Please check the Payments report for the WBS element and Asset values in AW10N for AUC asset, this will provide the complete history of the WBS and AUC.
Regards
Murali -
Downpayment to Vendors using F110
Hi ,
We are trying to do downpayment to vendors using F110. During posting of downpayment request we gave the target special gl indiactor as " E" (with which the downpayment should be posted), but during the payment run, system is posting to alternative recon accounts given for indicator "A" .
why system is trying to post to accounts of indicator "A' even though we gave indicator "e " during payment request.
Thanks,Hi Monica,
For that go through t.code FBZP and select all company codes button (first one) T.code OBVUthere select company code(details)
there Sp. G/L transactions to be paid give whichone you have to give like F ,E&A.....under vendor
Ofter that system will give payment request through E
This is information is useful to you
If u have any doubt feel free to ask
Regards
Surya
Edited by: surya steria on Sep 15, 2008 6:18 AM -
A/R Downpayment Request,A/R Downpayment Invoice
hi
gurus
this is KD. can anyone soleve my confusion between A/R Downpayment Request,A/R Downpayment Invoice.plz solve this as soon as possible
bye GurusDear KD,
Please note that the A/R Down Payment Request is just a request that you are sending to your customer and you cannot post any payment against this Document . It is similar to Proforma Invoice in the sense that it used for Information purpose or a request to the customer that for e.g he is requested to make say 20% of the payment before the deliveryv in order to make the delivery.
Now the A/R Down payment Invoice is an actual Invoice with which the cutomer can make the catual payments. Further the above example when the amount is Rs.1000 you will have to put the DPM % in The DPM field in the Footer of the document . Say you put it as 20 % then the system calcualtes 20 % of 1000 which is 200 and creates the Invoice for Rs. 200/- only.
Hope this clears your doubt.
Award points if Helpful.
Nagesh. -
TDS on Downpayment/Partial Payments
Hi Freinds,
My client is facing a problem regarding TDS deduction. i.e, TDS is getting deducted both at downpayment and invoice posting. i want to know whether any configuration is there , where the system identifies the net amount after downpayments/partial payments for TDS.
Note; The client doesnt want to change withholding base amount Manually
and also i have tried the central invoice proposition in the withholding tax type , but it is not working. can anyone help me with this.?...
points wil be defnitely awarded.
thanks and regards
Mohammed A SUlfeekharHi Madhu and All
Here i got some doubt
1. F-48 10000/- tds on 1000/-
2. F-43 50000/- tds on 5000/-
3. f-54 10000/- reverse the tds on 1000/-
4. F-53 40000/- no TDS
in the 4 point f-53 we need to make payment of Rs.36000 with no tds .....
because the tds amount is got reverse of Rs.1000/- in point no.3 so net payment made is 9000/- only. the balance has to be paid is
total invoice -- 50000
less tds -- 5000 -
less advan -- 10000 -
Add tds on adv
(F.54) -- 1000 +
Net amount -- 36000
Can you calrrify me in this regards.
I would be thankful for giving clarification
Regards,
Raga. -
Doubt in case of Down payment made
Dear Experts,
My client is doing a Downpayment against a PO for Asset wherein I had config the asset class for Downpayment transation type 15 in SPRO
But I am not understanding what General Ledger Account I should give for Down payment in AO90 as the Advances can be booked for Domestic as well as Foreign Vendors
Please reply for this doubt
Regards
Radhika JThanks for your reply prakashcw!!!
Report is showing all configuration as correct...
1) I have done entry in F-48 and checked the status in the program you have mentioned...
It comes up with the error
"Withholding tax amount exceeds total bank line item amounts.
Message no. 7Q320"
Though the entry is:
Vendor A/c Dr. 60
To bank 54
To TDS 6
2) Invoice Entry of Rs100 @10% TDS
Entry:
vendor CR V0 90.00-
Expenses DR V0 100.00
TDS 10.00-
1 Vendor No. IA ZF 10.00 INR
Final Withholding Tax Amount 10.00 INR
3) For the Invoice cleared on the
39 1110020 Vendor 60.00-
26 1110020 Vendor 54.00
40 2541301 TDS 6.00
2 vendor no. AA PF 0.00 INR
Final Withholding Tax Amount 0.00 INR
4) When making the final payment to the vendor system is doing this entry
001 50 Bank 26.00-
002 38 Vendor 54.00-
003 25 Vendor 90.00
004 50 TDS 10.00-
That means system is calculating the TDS at the time we are making the final payment.
Please suggest what shall I do in order to rectify the problem.
Thanks and Regards
Nitin -
Hello friends,
Im Raghu here i have a query "whether we can make advance payment through
"Automatic Payment Program"(APP) is there any special configuration for that
I selected spl GL indicators for Advance and i entered Downpayment request also
if possible send me screen shots. [email protected]Hi
You can never select particular invoice in APP. You just mention 'posting date', 'doc.enetered upto date' and 'due by date'. Then you select vendors you want to make payments to. Also make sure payment methods are properly selected
make sure that all these dates are properly entered and particular vendor/s selected.
hope this will clear the doubt.
pushkaraj -
Vendor Downpayment Request Payment Order
Dear All
We are processing most of our vendor payments through Automatic Payment Program which initially create the payment order and later once we upload the EBS system clears the vendor open item. All the vendor open items which are having payment order are locked and cannot be cleared without payment order. This is a control so that no duplicate payment can be made. But we recently found a flaw in SAP where although normal open items are blocked but in case if there is any payment order for downpayment request, we can still process the payment through F-48 meaning we can create the down payment for the DPR for which payment order exist so there is a chance of duplicate payment to vendor. Please advise if someone face the same issue and is there any solution to control it.
Best Regards
Farhan QaiserHi,
F-47: Down Payment against PO
regards,
Sanju M S -
hi i have a doubt....
in fbl1n transaction, there are open items and cleared items.
in it the cleared items for certain document types such as invoice etc is not present in the open item table (bsik)
however the cleared items for document types such as general voucher its present in the open items table (bsik)
is this possible as all cleared item entries shld b present in the open item table with an indicator set for cleared or not...
plz exlain!Hi
There are 2 tables(open and Closed Items) in FI for Account Payables and Account Receivables and GL accounts
1.Account payables: BSIK is Open Items and BSAK is Closed items
2.Account Receivables; BSID and BSAD for OPEN and closed items
3/GL accounts : BSIS and BSAS for Open and Closed Items
<b>Reward points for useful Answers</b>
Regards
Anji -
A/P Credit memo cannot copy from A/P Downpayment Invoice
Hello Everyone!
I have encounter problem in A / P credit memo. If I clicked on the Copy from A/P Down payment the list of invoices do not appear.
List seems to be empty. I've checked on the A/P down payment and the account is still open and the is an existing downpayment.
Thanks!Hi Nelle_13,
if the DPI is not shown in the matrix when you select AP Down Payment from the 'Copy From' menu in the credit memo, then that DPI has been paid or credited already. Only open DPIs can be used as base document for a credit memo.
To check, you should open the DPI, rightclick & select 'Applied/Reconciled Transactions'. That will show you the documents this DPI is reconciled with & guide you to the payment/credit note standing on it. If it's a payment, you can cancel the payment & thus re-open the DPI. It can then be used as base for a credit memo. You'll need to check with the accountant what to do with the payment.
All the best,
Kerstin -
Error while posting A/R Downpayment Invoice with Excisable Tax Code.
While posting A/R Dowpayment Invoice with Excisable Tax Code error of "Unbalanced Transaction" appears. This error does not occur while posting A/R Downpayment Invoices with Non-Excisable Tax Codes.
Kindly provide a solution for the same.SAP Note Number: 1179405
Error -5002 when trying to copy a document with Sales BOM
In order to create the delivery via the DI, you need to set the oDoc.Lines.BaseLine value to the LineNum value from the RDR1 table (in the above example you should enter the value 2).
we set oDoc.Lines.BaseLine=0 before starting the lines loop. This has resolved the issue.
This note was really helpful and it was found in another query.
You can also refer to this. https://forums.sdn.sap.com/click.jspa?searchID=19070513&messageID=6178079
Thanks.
Edited by: Sadanand Manda on Nov 24, 2008 12:16 PM -
Doubt in creation of a new object
Hi All,
I have one doubt in creation of a new object.If a new object is to be created and it is not a subtype
of any existing object, then what should we enter in the Program field for creating the object?
I hope I am clear with my question.
Thanks in Advance,
Saket.Hi Saket,
Following will be required for created a custom business object.
1. Object Type - ZTEST (Internal Techincal Key)
2. Object Name - ZTESTNAME (Technical Key Name)
3. Name - TEST (Name of BO, it is used while selecting the object type)
4. Description - (Short Description of BO)
5. Program - ZTESTPROGRAM (ABAP program in which the methods of the object type are implemented)
6. Application - A or B.. etc (Area to which your BO is related)
Please remember that you can learn these basic things by giving F1 help on those fields and in HELP.SAP.COM.
Regards,
Gautham Paspala -
Hi Everyone,
Can we read and validate the attachment of the mail.If so how to do it.
Thanks in advance,
SakthiHi Sakthi,
Please refere the below links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/ad/bf93409c663228e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/0d/52b240ac052817e10000000a1550b0/frameset.htm
Let me know if you have any doubts regarding this.
Thanks,
sekhar. -
PI' RFC Connection pool doubt.
Hi PI exports:
i have a doubt about pi' RFC Connection pool ,pi RFC receive channel can set the conn pool size ,but when start the rfc receiver channel ,is there always only one Connection pool ,or there is only one Connection pool instance?
thinks
Edited by: kevin liang on Oct 19, 2009 6:45 AMHi,
Connection poolins size means how many number of connection you want to make open to send data to ECC, We can define maximum number of connection in Receiver RFC Adapter,Go to additional parameters section and define Max Number of connection give the number there,thats it.Internally it works as Connection poolin mechanism.
Regards,
Raj -
Small Doubt Regarding SY-MANDT
Hi All,
SELECT changenr FROM cdhdr CLIENT SPECIFIED INTO CORRESPONDING FIELDS OF TABLE it_cdhdr
WHERE mandant = syst-mandt
AND objectclas = 'MATERIAL'
AND objectid = wa_matl-matnr
AND tcode = 'MM02'.
I have written the select stament as shown above.
In this i have a doubt like adding a field sy-mandt in the where condition will increase the Efficiency of program or not.
regards,
raghu.Hi..
No doubt the efficency would be affected but from business point of view there will many things that need to be checked as in:
If you are viewing data from CDHDR and CDPOS which is client specific then you are not viewing complete data.
These tables give us and document changes made to a particular object in SAP but if anything is cross client like company code(lets assume) then changes to it wont be visible in all the clients..
so there can be some key information you can miss out while working on some of the objects.
else in this case its good to make query cross client.
regards
vishal
Maybe you are looking for
-
File upload....How to find the user entered any file or not
Hi Team, I am working on with file upload UI. Some times without clicking on browse button, I mean without entering any file they are cliking on upload button, which is giving the exception. I know there is no action for UI element, Then how to resol
-
hi, I have already installed OEM 10g Grid Control OMS on my linux sever which also has EBS R12.1. I want to manage our EBS 11i which resides on another server I downloaded the Linux_Grid_Control_agent_download_10_2_0_2_0.zip file from OTN, and put it
-
Just bought Adobe Photoshop Ps , clicked on the icon in my Mac dock and am staring at a black page with a perimeter of symbols and a heading that reads "Adobe Photoshop CC 2014. I don't have a clue what I do next. I would like to transfer some photo
-
My Calendar doesn't update with iPhone sync even though it then updates my iPad
My Calendar on my iMac doesn't update when syncing with iPhone (the most updated device on my Calender), even though it then updates after I sync my iPad? By this I mean it updates the system on my iMac because it then passes it onto my iPad. Help PL
-
Permissions constanly screwed up....
i repair permissions on my MBP periodically. recently, i keep getting a long list of incorrect permissions that keep returning no matter how many times i repair - they return after restart, or even if i just repair permissions two times in a row. bel