DPM 2012 R2, Windows 2012 R2, and "stop" VM during backup

I did upgrade
DPM 2012 SP1 to 2012
R2.
DMP backup the server with Hyper-V
machines, windows / linux.
The previous version of Windows, as
did backup via partition shapshot
not stop its operation.
Current unfortunately it does!
During backup closes all connections
to the virtual machine, start the
copy and return connections.
Hyper-V also shows the
beginning of a new machine to count
on time as if they held the
restart (even though it was not).
As every change / off?
Going back to the previous version?
Backup Group I created again
- does not help.

"We are looking for what is
the procedure for checking why
the DPM wants
to do only
offline backup"
Yes that is why I asked what do you see in your "Windows Server Backup" from the Hyper-V host. Did
you do an update at the Hyper-V Hosts? Could you update the Hyper-V integration tools in your Virtual Machine?
What guest system is used in your windows virtual machine? If there a Windows Server 2008 R2 (with installed SP1) or a windows server 2012 you should try to update the integration tools at this machine first. When updated is done, try to backup online again.

Similar Messages

Windows 2012 to Windows 2012 R2 Inplace with Sharepoint Foundation 2010 SP2 (4.0.7116.5000)

I found than Inplace update from 2012 to 2012 R2 are supported. I also found 2012 R2 will support SharePoint Foudation 2010 with SP2 (4.0.7116.5000).
But I cannot find if we perform an Inplace update from a Windows 2012 Server running SharePoint 2010 (Sp2) to R2 will be successful.
As anyone done that?
Thanks.
Real
Réal Doré

Hi ,
On Windows Server 2012 R2, Microsoft supports only the SharePoint Server 2010 SP2 slipstream media configuration and not the RTM version of that configuration. For full SharePoint functionality and support, you must have the February 2014 cumulative update
(CU) or a later CU installed.
Additionally, only a new SharePoint Server 2010 SP2 slipstream installation that has the February 2014 CU or a later CU installed is supported on Windows Server 2012 R2. Microsoft
does not support a Windows in-place upgrade for this scenario.
For your scenario, I suggest you create a new SharePoint Foundation 2010 with SP2 on Windows Server 2012 R2, then migrate the content to new SharePoint 2010.
More information, please refer to the link:
http://support.microsoft.com/kb/2724471/en-us
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

MDT 2012 U1 - Windows 8 Pro and LTISuspend

Hi guys,
Part way through testing our deployment for Windows 8 and I'm looking at automating the image creation with MDT (as is the best practice). I'm trying to use LITSuspend in the task sequence to install a couple of apps that need special attention while
we test.
I was under the impression that you LTISuspend will pause the task sequence indefinitely until the script is run again from the desktop, I am starting to find that this is not the case. What I need to do is paus, install an application,
do several restarts and then continue with the task sequence. At the moment it will pause no problem, but when I restart, it continues with the 'Applying WinPE' and sysprep stages.
Is this the expected behaviour or is something going wrong?

I happened upon this thread when looking for a similar answer. I am getting underway with MDT 2013 to create a reference image and despite using LTISuspend.wsf, the suspend was not surviving reboots. My intention is to fully automate the process
but in the short term I have some testing and manual tweaks to make. Pausing a task sequence like this to make changes is acceptable (sometimes you have some interface tweaks to make that are hard to script) but probably not ideal; but taking a snapshot
of a VM right after the suspend is a great way to come back without re-running the entire sequence so that you can dig in to poke around for learning purposes or make some of your changes. I've seen Johan Arwidmark and Mykael Nystrom talk about this very
concept and its usefulness in MMS 2013 session DC-B306 'Building the Perfect Windows 8 Image' available online.
Regardless, I wanted to share - as of MDT 2013 (I realize this thread started with 2012 U1) - that once I was paused I found there is a critical RunOnce registry value that must be removed if you want any hope of surviving reboots before you resume
the sequence. The exact value is here:
hklm\software\microsoft\windows\currentversion\runonce\LiteTouch
String data with value = wscript.exe "C:\MININT\Scripts\LiteTouch.wsf"
Test for yourself and don't take my word conclusively that this is the only hook of concern, I am just reporting that it seems to help in my testing. You can write a couple simple scripts to take this out and then put it back like so:
To disable (remove key to prevent reboot interference):
$regPath = "hklm:\software\microsoft\windows\currentversion\runonce"
Remove-ItemProperty -path $regPath -name "LiteTouch" -force
To enable (get ready to resume task sequence):
$regPath = "hklm:\software\microsoft\windows\currentversion\runonce"
New-ItemProperty -path $regPath -PropertyType string -name "LiteTouch" `
-value 'wscript.exe "C:\MININT\Scripts\LiteTouch.wsf"' -force

SCOM 2012 collect Windows Audit logs and forward them to a Linux Syslog server

Hello:
1. We have a SCOM 2012 server.
2. We have SNARE agents for PCI systems, but now we want to save money by gathering all events for all Windows servers using its native features.
3. We also have a centralized Linux server running SYSLOG which aggregates the logs to our Dell LogVault retention appliance (for PCI purposes)
Thus, my question:
In effort to remove the SNARE agents from the windows servers, can we implement Audit Collections Services (ACS) in the windows environment so that they collect/forward audit/event logs to the SCOM 2012 server and then SCOM forwards the events to the centralized
syslog Linux server? In which case they are aggregated to the Dell appliance.
We prefer to use the Linux syslog as the centralized log server but would like to know how to go about implementing the solution above.
Many thanks,
Robert Perez-Corona

Hi,
Here is a thread about how to make SCOM 2012 work as a syslog server, hope this can be helpful for you:
https://social.technet.microsoft.com/Forums/en-US/524ea527-c069-40f9-96ef-026a4aa06fe9/make-scom-2012-a-syslog-server?forum=operationsmanagergeneral
Regards,
Yan Li
Regards, Yan Li

Windows Server Essentials Connector stops responding during install Win 7 Pro to 2012 R2

I am trying to reconnect a Win 7 Pro computer to a new Essentials 2012R2 and when it asks me to set it up for just me or multiple users a message pops up saying
it has stopped responding. It sets up a profile of _clientsetup_$ and it shows up in dashboard as an offline device. This computer was hooked up to an Essentials 2012R2 previously. Tried uninstalling the connector software, removing the computer from the domain,
renaming the computer and re-installing the connector software from the http://(server)/connect. Even tried backing up the existing profiles and creating a new clean one and went through the above procedure with the same results. I set up 4 others
with no issues and it would be the bosses computer that fails. I am a newbie so any help would be greatly appreciated, thanks.

Hi,
Sorry for my interrupting.
Would you please let us know whether this problematic client computer was upgraded to Windows 7 Pro from a previous OS? Did you install any third-party application on this Windows 7 Pro client computer? Just a confirmation, thanks for your understanding.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

AMT 3.2.10 Clients with SCCM 2012 on Windows 2012

Hey
I have a couple of HP dc7800 computers with Intel's AMT/vPro that I'd like to provision with SCCM 2012. The installed firmware version is 3.2.10 which is a supported version according to the documentation [1]. Provisioning of newer clients (5.2.x upwards)
is successful, so I can rule out all the usual suspects like the provisioning certificate from GoDaddy, our internal CA, DHCP options, etc. Provisioning with SCCM 2007 of both 3.2.x and 5.x AMT devices is also still successful.
The amtopmgr.log repeatedly shows the following entries:
Provision target is indicated with SMS resource id. (MachineId = 16777325 WS45.mydomain.ch)
Found valid basic machine property for machine id = 16777325.
Warning: Currently we don't support mutual auth. Change to TLS server auth mode.
The provision mode for device WS45.mydomain.ch is 1.
The IP addresses of the host WS45.mydomain.ch are x.x.x.x.
Root hash of provisioning certificate is 2796BAE63F1801E277261BA0D77770028F20EEE4.
Attempting to establish connection with target device using SOAP.
Create provisionHelper with (Hash: 74B7792EDBD64EBB01E2E3A0B27FAFA04C2D3BCB)
Set credential on provisionHelper...
Try to use provisioning account to connect target machine WS45.mydomain.ch...
Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server.
**** Error 0x37f2b370 returned by ApplyControlToken
Fail to connect and get core version of machine WS45.mydomain.ch using provisioning account #0.
Try to use default factory account to connect target machine WS45.mydomain.ch...
Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server.
**** Error 0x37f2b370 returned by ApplyControlToken
Fail to connect and get core version of machine WS45.mydomain.ch using default factory account.
Try to use provisioned account (random generated password) to connect target machine WS45.mydomain.ch...
Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server.
**** Error 0x37f2b370 returned by ApplyControlToken
Fail to connect and get core version of machine WS45.mydomain.ch using provisioned account (random generated password).
Error: Device internal error. This may be caused by: 1. blabla...
Error: Can NOT establish connection with target device. (MachineId = 16777325)
After some investigation with Wireshark, I've found out that SCCM tries connect with TLSv1 to the AMT device. The response from the device is immediately an SSL alert (internal error). Using OpenSSL, I could connect to the device if I explicitly told it
to use SSLv3. This leads me to believe that the 3.2.x firmware cannot handle TLSv1 correctly and SCCM never tries to connect with SSLv3 after a failure.
So the question is: How can I get SCCM 2012 to provision these devices?
Regards,
Ingo
[1]
http://technet.microsoft.com/en-us/library/c1e93ef9-761f-4f60-8372-df9bf5009be0#BKMK_SupConfigOOB

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Windows service start and stop automatically

i'm trying to start windows service, which i installed via running beasvc with parameters. everything used to work fine, but yesterday somthing broke up: i press the start button in the control panel, service tries to start, but then it stops and the following message appears: "Weblogic 9.0 Workspace Service service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service." sometimes it stops right after starting without giving any messages.
any ideas what's wrong with it&

If I run from a cmd box it shows a successful start, however when I look at the services through the MMC it is not started. Basically, it starts successfully and then immediately shuts off stating the message in the original post. This is after and only after I apply sp7 for BEA 7. If I roll the server back to just v 7, I don't have a problem. I have downloaded V7 twice, and I get the same result. I have followed the install instructions to a T and still the same result. I have also tested removing the user created pages, and I get the same exact error telling me either it's a generic error or, SP7 has issues. The only reason we are rolling to SP7 is because of a security issue, but for the time being we have locked down the firewall. Any other suggestions? I have had my Maximo Administrator contact BEA, and MRO about this problem (Maximo is the only system we use web logic for) and they default to the answer that it is a java issue. That V7 is not supported above java 1.3.xxx which is bull because we were running version 1.4, due to a security issue with JVM 1.3 and all worked well. I have replicated the install with JVM 1.3xxx for BEA 7 sp 7, and that did not solve the problem either. Sorry for the long post I just wanted to try to get all the info out.
Thank you for you time and consideration
Tanner

How to back window 8 from window 8.1 and stop automatic window updates

Hello Sir,
                          In my laptop automatically update window 8 to window 8.1. but last time massage show if you click ok then your window 8.1 sucessfully update.
                         Sir, I want to 3-4 before days my computer that stage. he will be come back.
                           And how to switch off Window update.
                         Please sir, sent me recovery or restore procedure those are not harm my computer.
               Thanking You
                Ranjeet

ranjeet_jaina wrote:
Hello Sir,
                          In my laptop automatically update window 8 to window 8.1. but last time massage show if you click ok then your window 8.1 sucessfully update.
                         Sir, I want to 3-4 before days my computer that stage. he will be come back.
                           And how to switch off Window update.
                         Please sir, sent me recovery or restore procedure those are not harm my computer.
               Thanking You
                Ranjeet
Turn off Windows update , follow this.
Also go through this thread, try the suggestion from HP Expert @Nuccii
To do System recovery, follow this - try System refresh instead of Factory reset so that data, files and settings would be preserved. Nevertheless always backup all your data to an extrenal hard drive before doing any sought of recovery.
System restore won't help if you've upgraded from Windows 8 to 8.1 & want to go back to 8.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Unidentified Network appears every Windows 7 reboot and stops NW access

I have an HP Pavillion PC which had Windows Vista Home Premium with all patches up to date. I upgraded to Windows 7 last weekend and ever since every time I reboot NW access fails. In Network Sharing there are 2 networks "Network 2" and "Unidentified Network". I have to disable the NW Adapter and enable each time to get rid of the "Unidentified Network" and recover NW access.
How can I fix this?

Hi,
You can also try the following steps to troubleshoot the issue.
1. Bypass the router and connect to cable modem directly for a test. Do you need disable Local Area Connection now? If so, please let me know. Otherwise, please upgrade the router firmware and then connect to router again.
2. Temporarily turn off firewall on the machine and router (If it has).
3. Upgrade the NIC driver.
4. Restart the computer to Safe Mode with Networking to check the result.
5. Configure the connection to obtain an IP address automatically
=======================================
a. Click "Start", input "NCPA.CPL" (without quotation marks) to Start Search bar and press "Enter".
b. Right-click the network connection and click "Properties".
If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
c. Click to highlight "Internet Protocol Version 6 (TCP/IPv6)" and click "Properties".
d. Check "Obtain an IP address automatically" and "Obtain DNS server address automatically".
e. Click "OK".
f. Click to highlight "Internet Protocol Version 4 (TCP/IPv4)" and click "Properties".
g. Check "Obtain an IP address automatically" and "Obtain DNS server address automatically".
h. Click "OK".
i. Reboot the computer.
What's the result now?
Thanks,
Novak

SCEP 2012 Client in Windows 8 / 2012 - in Windows 2008 Domain- Not Syncing -/ Not Compatiable

Dear All ,
With lots of Hardship I had installed SCEp 2012 in Windows 2012 Virtual machine in WIndows 2008 Domain.
SCCM 2012 Server in Windows 2008 Server with Sql 2008 was - performing well and there was no issues until our COmpany planned to Convert the Windows 2008 Server to Windows 2012 Server ( AD is 2008)
WSUS is not Fully synching with SCCM 2012 ( previously it was )
Software Updates not pushing properly and to top all the SCEP client is not compatible with win 8.1 pro or win 2012 server
Error: Failed to download content id 16787046. Error: Access is denied.
Package:
Success: The software updates were placed in the existing package:
• Deployment Package(JUN2014)
Software updates that will be downloaded from the internet
Error: Update for Forefront Endpoint Protection 2010 Client - 4.1.522.0 (KB2780435)
Errors
Failed to download content id 16787046. Error: Access is denied.
Language Selection:
English
But the service account has full access - administrative rights and the administrator of the system
please advise on this

Hi,
All the software updates downloaded failed?
Are there any errors in PatchDownloader.log? If you use Automatic deployment rule, please also check ruleengine.log.
Please add the account with Full rights to the source share (both NTFS and Share permissions) where the Deployment Package is located.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Installing a Windows 2012 Domain Controller into a 2000/2003 domain with Exchange 2003

Hello,
    I have a client that we are planning to migrate to 2012 over time. They currently have a Windows 200 DC and 2 member servers running Windows 2003, one of which is running Exchange 2003.
    We first are going to introduce a 2012 server into the domain and my plan was to DCPromo the 2003 server that isn't running Exchange and raise domain level to 2003 and then demote the 2000 server. I was then going to install the
2012 server into the domain and make it a backup Domain Controller for the time being and leave the newly promoted Windows 2003 server as the primary Domain Controller with all the roles and global catalog. My question is will Exchange 2003 still function
normally in this scenario?
   I've been doing research and read some things about Exchange 2003 not working with 2012 Domain Controllers, but I was thinking if the 2003 is still the primary, it might work. We will eventually migrate to 2003, they just don't want to
do it all at once, due to costs and other issues.
Thanks.

I didn't ask if it was supported, I just wanted to know if Exchange 2003 would continue
to function if the Windows 2003 DC still held all the FSMO roles and Global Catalog.
A not supported situation means that it is a situation where Microsoft made no testing or do not guarantee that you can operate with no problems. Following a not supported scenario could be done but is on your own risk.
If it won't, can the 2012 server be a member server in the 2003 AD? The 2000
DC it is replacing, just shares files on the network in addition to being the lone AD server
Yes, it can be a member server.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Inplace upgrade Windows 2012 DC to Windows 2012 R2

Hi
We plan to upgrade some of our DCs from Windows 2012 to Windows 2012 R2.
Theese DCs is on a DMZ holding our virtual machines management servers so they are not the most critical DCs but they are critical enough to not working for a longer time.
Normally we dont do inplace upgrade but this is more of quick solution to raise the servers to the same OS level
So has anyone done an inplace upgrade from 2012 to 2012 R2 on domain controllers? Any problems?
We have two DCs, in differents locations.
BR

Yes, we've upgraded some of our DC's from Server 2012 to Server 2012 R2 without any issues at all. Obviously you want to do them one at a time, but we found it completely straight forward.
In fact, if it wasn't for some unrelated legacy issues at one site (old servers preventing us upgrading that sites DPM install as DPM 2012 R2 doesn't support them, but DPM 2012 doesn't support Server 2012 R2) we'd have upgraded all our DCs by now.

SCCM 2012 SP1 + WSUS + Server 2012 + SQL Server 2012

Hi all;
I installed SCCM 2012 with Sp1 for my site server and everything is going well.. And than i installed the WSUS role on my Windows Server 2012 and SCCM 2012 SP1 it gave an error message which is "Fatal Error: The schema version of the database is from a newer
version of WSUS than currently installed. You must either patch your WSUS server to at least that version or drop the database." My database server is SQL Server 2012... Do you know any pathc for WSUS or SQL Server 2012 doesnt support WSUS yet???
Thank You...
MCT

Normally if you are going to install SCCM 2012 SP1 +Windows 2012 with SQL 2012, Then you better use the SQL 2012 sp1.
also when you are installing the WSUS version 6.2 which come with server 2012 make sure you leave the default settings as it is. it shows in the below article.
also when you are giving the path to save the WSUS contents make sure the drive you going to create the wsus folder and the place where you going to download the updates is having free disk space and its formatted with the NTFS volume. Also the service account
you are using for this configuration should have the admin rights to the location of the wsus folder you going to create,
Thanks
Hasitha

CC&B start and stop script

Hi,
has any one automated the start and stop script for backup.
Please share the script.
Regards
TAI

Hi,
I don't believe there is a single script that can fit all installation of CC&B .
Backup usually has a strategy and a plan.
In our installation we run incremental backup daily for the database, and full backups weekly and montly. As for the application, full backup daily. Also we have several application servers running and the database has RAC installation.
So I guess you will need to review your backup strategy consider existing backup solutions in the market.
AK

Write access to a directory for ASP 2.0 application stops working on Windows 2012 Standard Cloud Server

Just moved our ASP 2.0 based web application to a Windows 2012 Standard Cloud Server. A directory is used for temporary copying of files for the application. The Read Write access is properly given and everything works but then stops working
in about 2.5 hours. The settings are still there, to make things work again typically I add "Everyone" to the security list and apply and then 3 hours later I remove "Everyone" and this refreshes the security setting and things work
againg for a couple of hours. Last Cloud server was 2008 R2 and we had no issues. Recently moved to this new cloud server. Code has been functioning fine for years and can not migrate it to newer ASP since will have to make quite a few code
changes. Obviously a bug which needs to be addressed. Again the security settings do not disappear but are no longer handled properly every 3 hours or so.

Hi,
Is there any other files have the same issue? Please create a test folder and give the same permissions with the directory for ASP 2.0 application to see if the issue still exists.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

DPM 2012 R2, Windows 2012 R2, and "stop" VM during backup

Similar Messages

Maybe you are looking for