DPS Single for small deployment

Hi all, I'm hoping you can help me figure out how best to go about makeing something happen for a client.
I need to get a single folio out, but only to 5 ipads. I know I could just use adobe content viewer, but that looks sloppy and the recipeients of the ipads would never find it again if the backed out of the app.
In an ideal world, we'd have our one wee little folio on an ipad as a stand alone app. I know I can do a closed deployment using an Apple Enterprise License, but I think i read that I had to have a DPS Enterprise account for that too, which I very much doubt my budget will be able to accomodate.
If somone could give me a few pointers, I'd be very greatful.
Thanks
Frank

You can built a single edition app, you either need to purchase a SE serial or have access to Creative cloud subscription + access to Apple developer program $99/yr
Then, get all of those 5 ipads UDIDs added to the mobile provisioning certs. Create the app using DPS, download the development version of the app and give it out to those 5 people. Have them sync the app through iTunes onto their iPads.
No deployment of your app to Apple appstore or through DPS & Apple enterprise required

Similar Messages

Hi, I have the DPS Single Edition is but the Folio Producer public when the folio I alone was deprived. Why? How do I publish for the public? Thank You

Hi, I have the DPS Single Edition is but the Folio Producer public when the folio I alone was deprived. Why? How do I publish for the public? Thank You

You should look at our Single Edition publishing guide. You don't use Folio Producer with Single Edition. http://help.adobe.com/en_US/ppcompdoc/Step_by_step_guide_to_dps_se.pdf
Note that support for Single Edition in Creative Cloud ends on May 1st. Make sure you get your app completed and approved by Apple before then.
Neil

How does a single cisco router network enable outgoing calls for small businesses if no dial plan is used

Hi Cisco techs,
I was recently asked this question at work from the rest of my team as they know I am doing studies for cisco ICND 1 & 2.
And couldn't answer them.
Or does this require more information like hardware used etc?
Had searched Google to ambiguous results.
Can someone give me a link to advise please
Thanks in advance again..

Dear,
For small business (up to max 450 users) we use Call Manager Express (CME) which is configured on Cisco Voice router.
If no dial plan is used or configured then none of callmanager can do external outgoing/internal calls. Dial plan is basic thing which must be configured on cisco voice router (e.g. CME).
If you have configured Phones (ephone & ephone dn) and if they are registered on callmanager express then for internal calls you dont need to configure dial plan because callmnager have all the information of its phones.
If you want to have external incoming/outgoing calls for CME then you will have to create dial peers/dial plan.
For a CME lab setup, you can visit below link.
http://cisco.jjc.edu/cnt208/PDF/CCNP4_lab_2_1_en.pdf
Suresh

Need advice for starting a Managed Cloud Service for Small Businesses

I hope this is in the right forum. I have done a lot of research and searching but havent found anything that specifically answers, in total, what I am wanting to accomplish. I live in a small town and want to start a Managed Cloud Services for
small to small-medium business in my area (2-30 users for each business). I want to market this to have businesses replace their in-house server(s) to virtual ones I would host in a local Data Center with my own equipment that I would maintain. I
am just starting off so I don't have any clients I do this for currently, but I get asked about this frequently. I want to run a 2012 R2 Domain Controller and a Hyper-V 2012 R2 server. The virtual servers I will host are going to be for AD, RDS,
FTP, and files. Software examples that people are going to be using these virtual servers for are Quickbooks, Sage Accounting, Remote Desktop or RemoteApp, custom CRM or small database software, Office 2013, etc. No Exchange currently but will
probably configure something for that in the future (maybe run 1-3 virtually for now if someone asks, but will only do it if the user base is fairly small ~under 10 users). I only have 1 static IP to work with over a 100Mbps connection up and down.
For hardware, I am figuring something along the lines of this:
(1) 1U, single CPU w/2-4 cores, 8GB, 2x73GB SAS 10k RAID 1, Dual PSU, running Windows Server 2012 R2
Domain Controller
(1) 2U, 2x 8-core Xeon ~2.6Ghz, 80GB RAM, 8x600GB SAS 15k in Raid 10 for Storage (VHDX files, etc), RAID 1 small Basic drives (or USB stick) for OS, Dual PSU, Quad GB Nic which I can use for load balancing/teaming, Hyper-V
2012 R2
Hyper-V Virtual Server
(1) GB Unmanaged Network Switch & (1) Cisco 5510 Firewall
Most of my questions are about the best way to configure this. I am planning on managing my Hyper-V from the physical Domain Controller server. Each virtual server will have RDS & (possibly) AD services on a single server.
1) I want to replicate the physical Domain Controller. Should I get another server or just virtualize the replica in Hyper-V? I understand that if the Hyper-V goes down, so does my DC replica.
2) Should I use my Domain Controller to manage ALL users on each virtual Server, by creating separate Organizational Units for each business?
3) Should I setup my domain controller with Hyper-V management and then each Virtual Server I setup be a separate domain (Ex. mydomain.local, business1.local, business2.local, etc)? Each one has no connection to any
other, completely seperate. Or should I do subdomains (business1.mydomain.local).
4) What I have read is that Subdomains are a pain to manage with user rights, etc. I want to keep each server complete separated from one another over a network connection, I suppose the VLan through Hyper-V options
do this? I dont want wondering users to stumble upon another businesses files (I know they would probably be prompted with a login for that business/domain).
5) For each virtual server, I want to create and have an HTTP subdomain point to that server from my domain name. (Ex: business1.mydomain.com, business2.mydomain.com, etc.) I want them to be able to have access to
only their RemoteApps or be able to type that address in their Remote Desktop program as the host name. This would be for viewing the RemoteApp login page and RemoteApps for that business over HTTP/S through a browser.
6) If I do not have separate DC's in each virtual and my main DC manages each one, is their a way to connect up each companies RemoteApps using a single site that only shows what they are assigned to based upon their login?
(Ex. http://login.mydomain.com which then shows that user what they are assigned on their own virtual server)
7) Since each business will use the same ports for RemoteApp (443) & RDC (3389 unless I change it), how would I setup the subdomains to point to their correct server and not overlap for mess with any of the other servers
since its all over 1 static WAN IP for all servers. Thats why I figured setting up IIS subdomains would solve this.
8) For backups or Hyper-V replication, is it better to have software that backs up the ENTIRE Hyper-V server (Acronis Advanced Backup for Hyper-V) as well as replication or just backups? Or should I do separate file
backup on each virtual with a replica? Can a replica be a slower server since its just a backup? (Ex. 1x 8 core, 80GB, 8x600GB 10k SAS)
9) For the servers that will be using FTP, can I again rely on the subdomains to determine which server to connect to on port 21 without changing each FTP servers ports? I just want each business/person to type in
the subdomain for their business and it connect up to their assigned FTP directory over port 21.
10) If the physical DC manages DNS for all Virtual servers, can I forward sub domain requests to the proper virtual server so they connect to the correct RemoteApp screen etc. Again all I have is 1 IP.
I hope all of these questions make sense. I just want every business to be independent of each other on the Hyper-V, each on their own virtual server, all without changing default ports on each server, each server running RDS, (possibly) AD, (a few) FTP,
and all over a common single WAN IP. Hoping subdomains (possibly managed through IIS on the physical DC) will redirect users to their appropriate virtual server.

If you really want to run your own multi-tenant service provider cloud, Microsoft has defined the whole setup needed.
They call it Infrastructure as a Service Product Line Architecture. You can find the full documentation here -
http://blogs.technet.com/b/yuridiogenes/archive/2014/04/17/infrastructure-as-a-service-product-line-architecture.aspx
There are several different ways of configuring and installing it. Here is a document I authored that provides step-by-step instructions for deploying into a Cisco UCS and EMC VSPEX environment -
http://www.cisco.com/c/dam/en/us/td/docs/unified_computing/ucs/UCS_CVDs/ucs_mspc_fasttrack40_phase1.pdf
This document contains the basic infrastructure required to manage a private cloud. I will soon be publishing a document to add the Windows Azure Pack components onto the above configuration. That is what would more easily provide a multi-tenant
experience with a Azure look and feel. It is not Azure, but the Azure pack is a series of applications, some of which came from Azure, the provides Azure-like capabilities only in a service provider type of environment.
Whether you use my document or not (which has actually corrected errors found in the Microsoft documentation), you should take a look at it to see what it takes to put something like this up, if you are really serious about it. It is not a small undertaking.
It requires a lot of moving pieces to be coordinated. Yes, my document is designed to scale to a large environment, but you need the components that are there. No need re-inventing the wheel. Microsoft's documentation is based on a lot of
real hands on experience of their consulting organization that has been doing this for customers for years. This one is also know as Fast Track 4. I've done 2 (2008 R2) and 3 (2012), also and it just keeps getting more complicated based on customer
demands and expectations.
Good luck!
. : | : . : | : . tim

Is Adobe DPS available for Android phone?

hi~
is Adobe DPS available for Android phone?
The app is not founded in googleplay..

I encountered the same issue. You (in theory) would simply update the APK file. Find the AndroidManifest.xml
right around line 42
<supports-screens android:smallScreens="false" android:normalScreens="false" android:largeScreens="true" android:xlargeScreens="true" />
change to
<supports-screens android:smallScreens="true" android:normalScreens="true" android:largeScreens="true" android:xlargeScreens="true" />
recompile, package, deploy.
NOTE: I have not been able to get this to actually work LIVE in the play store where I have had some success with actually putting it on my device. I can get the app store to say that it is compatabile on small/medium/large/xlarge screens, teasing me with joy prior to the error I get when I attempt to install that the item is "not properly signed". This could be something with the META_INF xml file, the version of JDK and apktools or jarsign I am using, I certainly dont know... yet, but after about 10+ hours I am fairly certain of one thing: Adobe does not want it working on small/medium screens.
(perhaps for good reason...)
If I do come up with a solution I will post. As perhaps a feature request, would be great to have the following in the App builder:
1- Advanced tab
A: allows us to manually enter the
android:versionCode="00000"
android:versionName="0.0.0.0.0"
B: allows us to change
<supports-screens android:smallScreens="true" android:normalScreens="true" android:largeScreens="true" android:xlargeScreens="true" />
values.

DPS Single Edition - Wrong builder ID, how to fix it?

Hello all,
We design a quarterly magazine, and we´re using a dps single edition license to have it available to the readers as an iPad independent app, for each edition.
We were doing our second edition, and by error, on the Viewer Builder on the provisioning step we used the old mobileprovision files from the first edition (with the old bundle id).
The result is easy to find out - the app created on the DPS Viewer Builder (and signed with the old provisioning files) is not correct when compared with the one prepared on iTunes Connect for this second edition, and we only noticed that when we were trying to submit the app with the Apple´s Application Loader.
So my question is easy: how can we edit our mag on viewer builder and change for the new provisioning files (we need to use a new bundle id because the second edition is not an upgrade but a new app) on the without buying and new DPS Single Edition License (please mind that when we edit it we can use new provisioning files but they should keep the same mobile provision id or else we get the following error "Bundle ID inside the mobileprovision does not match the bundle ID used for the build").
Thanks!
Mario

Hi Bob, thank you for your reply.
Re-creating the file unfortunately doesn´t solve my problem:
1) if I edit the app on the viewer and replace the provisioning files (now with the correct bundle id) I get "Bundle ID inside mobileprovision does not match the bundle ID used for build (which was xxx.xxxxx.xxx)" , which makes sense because I´ve used first the wrong ones (and that´s why I´m in deep trouble and unable to upload it to Apple)
2) if I create a new app, even with the same name, at the end it asks for the Single Edition serial number to activate, and if I use the one that I´ve bought, I get "Serial number already redeemed".
If there isn´t any other solution (all ideas are welcome) I´ll contact tech support from Adobe in order to reset my Serial number (or something similar) because we can´t afford to buy another serial without using first the one we have paid for.
Thanks
Mario

Can you create apps after 1st May 2015 using Adobe DPS single edition?

Can you create apps after 1st May 2015 using Adobe DPS single edition?
I currently have SE via creatieve cloud - one of the only reasons we switched to CC was for the DPS SE.
Does anyone know if this capability will just be 'switched off' at midnight 1st May 2015?? There are huge costs for going the enterprise route but with no date in sight for Publish to be launched I am not sure I can wait for this, or should I???

Adobe states: Please note that the Digital Publishing Suite, Single Edition, service will be available for use until May 1, 2015, but beyond that date the service will no longer be available.
So essentially my licence will expire on 1st May - Adobe's note just mentions 'service' - even though part of CC and I will not be able to maintain my app or create any more IPA's after 1st May. I can't beleive there is nothing to switch over to other than paying thousands of pounds for enterprise??
Just all so vauge, feels like a plug is going to be pulled and thats it??? Maybe I am missing something?

Native android apps - with DPS single edition?

Can you build native android apps also with DPS single edition or only with enterprise edition?
Thank you for you help!

Thank you for your reply, Bob!
I've forgotten to ask the most important thing: This also stays that way for DPS V30?
Thank you!

Hello, I want to make DPS magazin for IOS and Android with a lot of text footnotes. There is about 200 footnotes per article. The idea is to make pop-up windows like in EPUB 3.0. Please help.

Hello, I want to make DPS magazin for IOS and Android with a lot of text footnotes. There is about 200 footnotes per article. The idea is to make pop-up windows like in EPUB 3.0. Please help., Hello, I want to make DPS magazin for IOS and Android with a lot of text footnotes. There is about 200 footnotes per article. The idea is to make pop-up windows like in EPUB 3.0. Please help.

Remember you can only build an iPad app using your Single Edition solution (which is included in your CC membership). So you'd need a Pro or Enterprise version of DPS to be able to create the Android version.
You can create pop-ups in InDesign using the slideshow options and a multi-state object. But it's all manual labour so you'll spend a lot of time on this, also depending on the layout of your design.

What does "Personal Use Only" for small business owners mean?

For small businesses or Sole-Proprietors, computers they use for business are also the machines being used for personal use. If I understand the new Mac App Store license correctly, you cannot ethically purchase an app on the App Store that will be used for business use. If that is the case, the greatest oxymoron is that they have a "Business" section in the App Store.
I truly LOVE how easy the App Store makes managing one's apps, but if I have to now deal with seperating all purchases based on it's overall use, they have just complicated the small business scene for small business owners.
I fully understand them wanting to discourage a large business from purchasing, for example, Aperture, once and installing it on 100+ machines. But if that is what they're trying to avoid, why not be more specific in the terms of the updated App Store license info. Instead, they are shooting down any and all use of anything purchased in the App Store for business.
Any other small business owners facing the same situation?

Here is a clause from the Terms and Conditions, which can be found at http://www.apple.com/legal/itunes/us/terms.html#APPS
*Begin quote*
(ii) If you are a commercial enterprise or educational institution, you may download a Mac App Store Product for use either (a) by a single individual on each of the Mac Product(s) that you own or control, or (b) by multiple individuals on a single shared Mac Product that you own or control. For example, a single employee may use a Mac App Store Product on both the employee’s desktop Mac Product and laptop Mac Product, or multiple students may serially use the Product on a single Mac Product located at a resource center or library.
*End quote*
It seems that as long as you abide by these guidelines, you can use App Store apps for business.

Config for small GW install

I'm planning to deploy on a small server using KVM our old server for a small community group
the server has 2.3Ghz dualcore Xeon, 8Gb ram, 300Gb RAID1 Hard disk - no real budget for additional storage
Plan is to deploy this on KVM - also need a Vibe install on the same server - so host and 2 VM's
current User Data is 30Gb
Usually with OES I allow 80Gb (500Mb Boot, 4Gb Swap, 20Gb /, 15Gb /var and rest as home which stores install files etc)
which I know is OTT but in this case would leave me very for data!!!
What is practical for "small" OES VM & Vibe ?

I'm not sure I totally understand the question. Are you asking how big a GW OES server needs to be? Or are you asking how big Vibe needs to be? I mean, I've gotten away with as small as 50 GB for OES, but I'm thinking it might be a better question for the OES folks. For GroupWise I usually tell people they should have "storage" allocated for GW itself that is at least twice the size of their expected PO size.

Photoshop licence for small company purchase

Hello!
We're a small company based in Luxembourg and we'd like to purchase Photoshop (only it). As I understood, you have a licence for small companies?
One year subscription costs 17.99 euro per month, and a single month is 27.99 euro.
Can we purchase Photoshop for only several months (say, Feb, May and Aug) if we're not planning to use it regularly?
Thanks.
p.s.: also, if we purchase one licence for a year, is it only for one machine or my colleague also can activate it on different computer?

You can cancel and reinstate monthly plans as you see fit, you just miss all possible discounts when you do it that way. And well, if you only use PS once every few months the smart thing probably to do would be to learn GIMP and some other free tools, meaning you proabbaly don't use any advanced features that you coulkd not find in those free tools as well. Otherwise look into getting CC for Teams or a volume licensing plan, but those require at least a full 1 year commitment.
Mylenium

Static variable is single for class or single for JVM

Hello,
I have doubt, static variable is single for class or single for JVM. as per my knowledge static variable is single for class, but suposse i have an web application (war of an application ) i deployed the application twice with different context, supose yahoo and yahoo1. but the ditrectory structure and classes are same, if i have a statc variable in
a classof an application, if i change the static variable of one class of an application wether it will change the static value of the class of another application.
Example
          yahoo -> web-inf ->      classes ->MainPackage->     MyStaticClass->     static int i=9;
          yahoo1 -> web-inf ->      classes ->MainPackage->     MyStaticClass->     static int i=6;
          if i change the static value i in yahoo application to i=5;
          at the same time if i access the value i in yahoo1 application what i will get (wether 5 or 6).
Thanks.

A static variable is 'single' in its class.
A Class is 'single' in its ClassLoader.
There can be many ClassLoaders per JVM.
There can be many applications per JVM. Each one generally has its own ClassLoader.
Ergo there can be many instances of a Class, and therefore many instances of its static data.

Contact Information for Adobe DPS team for Education

I would like to be contacted by an Adobe representative regarding the possibility of subscribing to/purchasing the Adobe Digital Publishing Suite for Education.
I am a faculty member at a 4-year research intensive University and administer a lab of 40 systems, approximately.
Thank you for providing the contact information for the Adobe DPS: the weblink for requesting more information (found below) is broken.
http://www.adobe.com/education/products/digital-publishing-suite.edu.html

You can get educational discounts on Creative Clould Membership which had DPS Single edition as a part of it. For more information, you should call Adobe Customer Service or Adobe sales directly as they would have the best information on this topic.
http://www.adobe.com/education/buying-guide.edu.html

Installing DPS tools for Indesign CC error

Hi,
I'm trying to install DPS-tools for CC, while CS 6 is still on our Macs (School with CS6-students @home) and I get the error, your administrator is blokking upgrades.
While i'm logged in as admin on my computer.
Though Folio Builder works on CS6 but i can't update (the folio builder tools) it either.
We would prefer to teach folios etc. in CC.
Gr
Sam
Chatted with an Adobe-support-guy, its a print related issue, here's there number. 800 .....

Sam then it is likely the packages were modified to prevent this functionality. Please utilize the Creative Cloud Packager to create new deployment packages. You can find more details at http://helpx.adobe.com/creative-cloud/packager.html.
If you have any inquiries regarding the process I would recommend posting to the Enterprise Deployment for Creative Cloud, Creative Suite forum - http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent.

DPS Single for small deployment

Similar Messages

Maybe you are looking for