Config for small GW install

I'm planning to deploy on a small server using KVM our old server for a small community group
the server has 2.3Ghz dualcore Xeon, 8Gb ram, 300Gb RAID1 Hard disk - no real budget for additional storage
Plan is to deploy this on KVM - also need a Vibe install on the same server - so host and 2 VM's
current User Data is 30Gb
Usually with OES I allow 80Gb (500Mb Boot, 4Gb Swap, 20Gb /, 15Gb /var and rest as home which stores install files etc)
which I know is OTT but in this case would leave me very for data!!!
What is practical for "small" OES VM & Vibe ?

I'm not sure I totally understand the question. Are you asking how big a GW OES server needs to be? Or are you asking how big Vibe needs to be? I mean, I've gotten away with as small as 50 GB for OES, but I'm thinking it might be a better question for the OES folks. For GroupWise I usually tell people they should have "storage" allocated for GW itself that is at least twice the size of their expected PO size.

Similar Messages

Home Hub 3 config for new Infinity install

Hi all,
Well, I've been with Demon Internet since almost day 1, way back in 1993 IIRC. However as BT have now rolled out Infinity into our village, and I can almost spit on the Infinity cab from my office window, I've decided to jump ship from Demon (bad move perhaps?)
I have quite a big internal network with several NAS, network printers and other stuff, and also use Wifi via an Apple Time Capsule/Airport Router that is connected to a Netgear router in brige mode.
I don't really want to have to fanny about reconfiguring my whole network to a new subnet, and wonder just how 'manageable' the HH3 is? Will the Openreach eng. ensure the router is configured to my requirements or just set it up as default and so long as he has a gateway connection out onto the net will just leave me to it?
Any advice, other than of course telling me that they may actually not bother to turn up at all....!

Thw Home Hub is intended to be a "plug and play" router for residential customers with no technical knowledge.
The engineer will normally go through connecting one computer to the hub to check that the connection works OK. That's about all.
Compared with more "professional" products, there's an awful lot that can't be tweaked on the HH. If it matters to you, you may be better off buying your own cable router.

Error when installing Lenovo solutions for small business [Screenie included]

Hello everyone.
Recently, I tried opening the pre-installed Lenovo solutions for Small Business software on my Lenovo e530 running Windows 7 Professional 64-bit version (Upgraded from Win 7 Home Prem 64-bit) but failed after getting a message for encountering a critical problem of some sort. I then tried restarting my computer and that did not solve the problem. And then, I decided to install an upgrade version of it from this website http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS030146. But before that I uninstalled the previous version by uninstalling Intel Small Business advantage customizations with Revo Uninstaller and I deleted all the related folders too with a thorough scan. Out of my expection, I got this message below saying that I could not proceed due to some unspecified error. Has anyone encountered the same problem before? Does anyone have a solution for this? I'm not sure if that's my computer's problem or from the driver itself. Thank you for your attention to this issue.

Hi, dougy
This should be configurable under msconfig. This is a program that you can use to tell your computer which programs you want to start when Windows starts. To get to this program, type msconfig into the search bar in the Start menu. A window should appear. Check under the Startup tab and make sure that the Lenovo Solutions for Small Business program does not have a checkmark next to it. This should prevent this program from starting up when your computer turns on.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

HT4839 PLEASE HELP!!! I am simply trying to update the APN settings on my Iphone3 AT&T carried Straight Talk SIM phone. For some reason, when I enter the Straight Talk APN info in the Config Utility and click "Install", NOTHING HAPPENS. WHY?

PLEASE HELP!!! I am simply trying to update the APN settings on my Iphone3 AT&T carried Straight Talk SIM phone. For some reason, when I enter the Straight Talk APN info in the Config Utility and click "Install", NOTHING HAPPENS. WHY? I have spent almost 2 full days simply trying to get the cellular data network settings to appear and I am now at the point of pulling hair and/or smashing things. Why is it so difficult to simply update the cellular data network APN settings on a standard Iphone 3 ATT with a unlimited Straight Talk plan? Everyone knows that Straight Talk's $45 a month unlimited data/calling plan is supposed to be 100% compatible with AT&T carried Iphones. Will someone please tell me HOW TO UPDATE THE APN SETTINGS ON THIS IPHONE 3. Thanks and God bless
<Personal Information Edited by Host>

StraightTalk is not a supported carrier.
Contact them for support.
FYI, unless the device is officially unlocked from AT&T, you will not be able to use it on another carrier.

Twist/S230u bug: cannot start Lenovo Solutions for Small Business after installing updates

An issue may happen after running ThinkVantage System Update and selecting all available updates. After rebooting, Lenovo Solutions for Small Business will fail to launch. This issue happens because of a failure during one of the updates.
To fix the issue, download and install the Intel MEI driver. Although this software is already installed on your system, it is in a broken state. Installing it again will fix it, and let Lenovo Solutions for Small Business run successfully.
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS032225

Thank you someotherguy for the solution and it solved the startup problem of Lenova solutions for small business..

Need advice for starting a Managed Cloud Service for Small Businesses

I hope this is in the right forum. I have done a lot of research and searching but havent found anything that specifically answers, in total, what I am wanting to accomplish. I live in a small town and want to start a Managed Cloud Services for
small to small-medium business in my area (2-30 users for each business). I want to market this to have businesses replace their in-house server(s) to virtual ones I would host in a local Data Center with my own equipment that I would maintain. I
am just starting off so I don't have any clients I do this for currently, but I get asked about this frequently. I want to run a 2012 R2 Domain Controller and a Hyper-V 2012 R2 server. The virtual servers I will host are going to be for AD, RDS,
FTP, and files. Software examples that people are going to be using these virtual servers for are Quickbooks, Sage Accounting, Remote Desktop or RemoteApp, custom CRM or small database software, Office 2013, etc. No Exchange currently but will
probably configure something for that in the future (maybe run 1-3 virtually for now if someone asks, but will only do it if the user base is fairly small ~under 10 users). I only have 1 static IP to work with over a 100Mbps connection up and down.
For hardware, I am figuring something along the lines of this:
(1) 1U, single CPU w/2-4 cores, 8GB, 2x73GB SAS 10k RAID 1, Dual PSU, running Windows Server 2012 R2
Domain Controller
(1) 2U, 2x 8-core Xeon ~2.6Ghz, 80GB RAM, 8x600GB SAS 15k in Raid 10 for Storage (VHDX files, etc), RAID 1 small Basic drives (or USB stick) for OS, Dual PSU, Quad GB Nic which I can use for load balancing/teaming, Hyper-V
2012 R2
Hyper-V Virtual Server
(1) GB Unmanaged Network Switch & (1) Cisco 5510 Firewall
Most of my questions are about the best way to configure this. I am planning on managing my Hyper-V from the physical Domain Controller server. Each virtual server will have RDS & (possibly) AD services on a single server.
1) I want to replicate the physical Domain Controller. Should I get another server or just virtualize the replica in Hyper-V? I understand that if the Hyper-V goes down, so does my DC replica.
2) Should I use my Domain Controller to manage ALL users on each virtual Server, by creating separate Organizational Units for each business?
3) Should I setup my domain controller with Hyper-V management and then each Virtual Server I setup be a separate domain (Ex. mydomain.local, business1.local, business2.local, etc)? Each one has no connection to any
other, completely seperate. Or should I do subdomains (business1.mydomain.local).
4) What I have read is that Subdomains are a pain to manage with user rights, etc. I want to keep each server complete separated from one another over a network connection, I suppose the VLan through Hyper-V options
do this? I dont want wondering users to stumble upon another businesses files (I know they would probably be prompted with a login for that business/domain).
5) For each virtual server, I want to create and have an HTTP subdomain point to that server from my domain name. (Ex: business1.mydomain.com, business2.mydomain.com, etc.) I want them to be able to have access to
only their RemoteApps or be able to type that address in their Remote Desktop program as the host name. This would be for viewing the RemoteApp login page and RemoteApps for that business over HTTP/S through a browser.
6) If I do not have separate DC's in each virtual and my main DC manages each one, is their a way to connect up each companies RemoteApps using a single site that only shows what they are assigned to based upon their login?
(Ex. http://login.mydomain.com which then shows that user what they are assigned on their own virtual server)
7) Since each business will use the same ports for RemoteApp (443) & RDC (3389 unless I change it), how would I setup the subdomains to point to their correct server and not overlap for mess with any of the other servers
since its all over 1 static WAN IP for all servers. Thats why I figured setting up IIS subdomains would solve this.
8) For backups or Hyper-V replication, is it better to have software that backs up the ENTIRE Hyper-V server (Acronis Advanced Backup for Hyper-V) as well as replication or just backups? Or should I do separate file
backup on each virtual with a replica? Can a replica be a slower server since its just a backup? (Ex. 1x 8 core, 80GB, 8x600GB 10k SAS)
9) For the servers that will be using FTP, can I again rely on the subdomains to determine which server to connect to on port 21 without changing each FTP servers ports? I just want each business/person to type in
the subdomain for their business and it connect up to their assigned FTP directory over port 21.
10) If the physical DC manages DNS for all Virtual servers, can I forward sub domain requests to the proper virtual server so they connect to the correct RemoteApp screen etc. Again all I have is 1 IP.
I hope all of these questions make sense. I just want every business to be independent of each other on the Hyper-V, each on their own virtual server, all without changing default ports on each server, each server running RDS, (possibly) AD, (a few) FTP,
and all over a common single WAN IP. Hoping subdomains (possibly managed through IIS on the physical DC) will redirect users to their appropriate virtual server.

If you really want to run your own multi-tenant service provider cloud, Microsoft has defined the whole setup needed.
They call it Infrastructure as a Service Product Line Architecture. You can find the full documentation here -
http://blogs.technet.com/b/yuridiogenes/archive/2014/04/17/infrastructure-as-a-service-product-line-architecture.aspx
There are several different ways of configuring and installing it. Here is a document I authored that provides step-by-step instructions for deploying into a Cisco UCS and EMC VSPEX environment -
http://www.cisco.com/c/dam/en/us/td/docs/unified_computing/ucs/UCS_CVDs/ucs_mspc_fasttrack40_phase1.pdf
This document contains the basic infrastructure required to manage a private cloud. I will soon be publishing a document to add the Windows Azure Pack components onto the above configuration. That is what would more easily provide a multi-tenant
experience with a Azure look and feel. It is not Azure, but the Azure pack is a series of applications, some of which came from Azure, the provides Azure-like capabilities only in a service provider type of environment.
Whether you use my document or not (which has actually corrected errors found in the Microsoft documentation), you should take a look at it to see what it takes to put something like this up, if you are really serious about it. It is not a small undertaking.
It requires a lot of moving pieces to be coordinated. Yes, my document is designed to scale to a large environment, but you need the components that are there. No need re-inventing the wheel. Microsoft's documentation is based on a lot of
real hands on experience of their consulting organization that has been doing this for customers for years. This one is also know as Fast Track 4. I've done 2 (2008 R2) and 3 (2012), also and it just keeps getting more complicated based on customer
demands and expectations.
Good luck!
. : | : . : | : . tim

How can I remove the BootCamp partition? as the size i created ws too small to install MS Office on 64Bit Windows 8.1 on MacBook Pro (Aug'13)

How can I remove the BootCamp partition drive for Windows 8.1, as the size which I created was too small for me to install Microsoft Office onto Windows 8.1 64-BIt. The machine which I have is the MacBook Pro 13' inch purchased in August 2013.

Either use Paragon's CampTuneX to resize it or use Boot Camp Assistant to remove the partition and restore the drive to one partition. Then create a new, larger Boot Camp partition. This will remove/delete/erase your Windows system.

Hal config for Elantech/Eee 1000h touchpad?

I've tried using the one that's in the 901-install Wiki page, and find it massively flakey (sorry no offense to anyone), compared to using xorg.conf.. It doesn't allow precise control at all, and for some reason (I'm sure it's the way I move my finger), seems to really jump up or down when I move side to side..
So does anyone have a config for this that works real good, that cares to share?
Thanks in advance.

I know this problem occurs when I compile the elantech driver in the PS2/trackpoint driver:
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
I was told you need the latest xf86-input-synaptics but Arch has the latest...
My workaround was to disable elantech:
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set

What does "Personal Use Only" for small business owners mean?

For small businesses or Sole-Proprietors, computers they use for business are also the machines being used for personal use. If I understand the new Mac App Store license correctly, you cannot ethically purchase an app on the App Store that will be used for business use. If that is the case, the greatest oxymoron is that they have a "Business" section in the App Store.
I truly LOVE how easy the App Store makes managing one's apps, but if I have to now deal with seperating all purchases based on it's overall use, they have just complicated the small business scene for small business owners.
I fully understand them wanting to discourage a large business from purchasing, for example, Aperture, once and installing it on 100+ machines. But if that is what they're trying to avoid, why not be more specific in the terms of the updated App Store license info. Instead, they are shooting down any and all use of anything purchased in the App Store for business.
Any other small business owners facing the same situation?

Here is a clause from the Terms and Conditions, which can be found at http://www.apple.com/legal/itunes/us/terms.html#APPS
*Begin quote*
(ii) If you are a commercial enterprise or educational institution, you may download a Mac App Store Product for use either (a) by a single individual on each of the Mac Product(s) that you own or control, or (b) by multiple individuals on a single shared Mac Product that you own or control. For example, a single employee may use a Mac App Store Product on both the employee’s desktop Mac Product and laptop Mac Product, or multiple students may serially use the Product on a single Mac Product located at a resource center or library.
*End quote*
It seems that as long as you abide by these guidelines, you can use App Store apps for business.

Anybody know what's up with the menu.xml.files not being available for DW after installing on a new comp?

Anybody know what's up with the menu.xml.files not being available for DW after installing on a new comp?

Usually that error can be cleared up by renaming the personal config folder. Turn on your OS's hidden files and then go to...
C: > Users > your username > AppData > Roaming > Dreamweaver (version) > your language > configuration
Rename the configuration folder configuration-old and start DW up. That should create an entirely new configuration folder and correct the menu.xml file.

Router for small business Internet connection

One of our clients recently switched ISPs to Speakeasy who installed a Hatteras HN 407 bridge. We have had Internet connectivity problems using their SonicWall 3060 firewall, and we experienced similar problems when attempting to use a newer Sonicwall TZ180. We temporarily installed a Linksys W54GT router, which has been working perfectly; however, we would like to have a more robust router for their 25 user network - additional security options, performance, VPN, two WAN connections, etc. Can you recommend a small business router with 2 WAN connections? This customer has a business ethernet 3Mbps (up and down) Internet connection, uses an online medical scheduling program, normally has 10 - 20 uses using the Internet connection and will be installing a backup DSL line that we would like to use for load balancing.

Our recommendation for Dual WAN would be RV082 This would be the prefect VPN router for small Business and if you are looking for more ports on the Ethernet, then we would recommend the RV016

Cant open any attachment or downloaded file with any office 365 for small bussines

I cant open any e-mail attachment or downloaded file of any kind with any application in office 365 for small bussines. Since I need it for bussiness need help NOW. Thank you.

Hi,
Did you get any error message when you tried opening or downloading the attachment?
Are you viewing attachments in Outlook Web App or Outlook desktop client? If you were using OWA when this issue happened, please have a look at this KB article and see if it applies:
https://support.microsoft.com/kb/2852113
Since this forum focus more on Office desktop client side questions, if it's an OWA issue in Office 365, I'd recommended you post a question in the Office 365 Community forum:
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most
qualifiedpool
of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
If I've misunderstood something, please feel free to let me know.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

What is the best value iMac config for hd video editing. I was going to go for i5 3.1 ghz with 4mb ram, but should I go further? Thanks!

What is the best value iMac config for hd video editing.? I was going to go for i5 3.1 ghz with 4mb ram, but should I go further? Thanks!

You have it currently installed? Can you go to the System Profiler and click on Applications (will take a while to populate) - take a look at your FCP and check what it says on the right - Universal, Intel, or PPC? It'll look like this:
If it's Universal or Intel, it'll run in Lion. However, the installer may or may not be PPC - that you may not know until you try to install. If you have it currently installed, then you could do what I did - move over all the files manually. I have a list of files for FCE and would assume they'd be the same with FCP: copy them from the old Mac and insert them in the very same spots on the new one.
Here is the list for FCE:
http://support.apple.com/kb/TA38198?viewlocale=en_US
(It was published for an uninstall, but worked like a charm).

ISU config for creating notification on Move In/Out or Disconnect/recon

Hi
Can anyone let me know how to configure system to create notificaiton/work order on following events in ISU:
1) Move in
2) Move out
3) disconnection
4) reconnection
Thanks in advance,
Laxmi

Hi Olivia,
I did the config for creating service order/notif on move in process for BP who is also a SD customer (independent of Company code).
1) Created a service object containing work center and PM order and referencing "Funcitonal location" and assigned to order codes (SM01, SM02, and SM03) and then configured the plant and work center for the service objects.
2) Configured the "Parameters for MR data processing" for blank company code and original company code for each division - cheked the service order/notifi and allow est MRRs, input 1 in data limitation and checked the display default meter value.
3) Did not configure the "general system parameters for Move in/out" for 'Create Service order/notif with delay"
After installing a device in the installation (billing installation) , I tried creating the move with intial meter readings and only "Service order/notifi" checked.
The problem is, after move in it is not creating the meter reading order and the service order but i could find entries in EABLG table with merer reading reasons 21 and 06.
Please help me creating meter reading order and service order on Move in.
I am new to ISU.
Thanks,
Laxmi

Anyone have definitive config for Neo2 Platinum and Speedfan

I've read almost equivalent posting indicating different info for Temp 1, 2, and 3.
I've got Temp 1 = NB, Temp 2 = CPU, Temp 3 = System.
based on my readings (NB = 14C, CPU = 38C, and System = 34C) the above makes sense. But many people say Temp 3 is the CPU. I can't believe my CPU would be cooler then my system temp, although, I guess it depends on where that temp is read from?
Can anyone confirm 100%?
What about Fans 1, 2, and 3? How do those corrolate to CPU, NB, and SYSFAN and SYSFAN2 on the mobo?
I also have a "Temp" that reads constant -1 C and shows as part of nForce2 SMBUS. What's that?
ALso with the fans, Fan 4 and 5 showing as part of nForce2 SMBUS with no readings. What's with those?

Quote
Originally posted by syar2003
16C heh .. means that speedfan does do the readout correctly.
It's just not possible with air cooling that something is lower than ambient temperature. (mine is 30C with a self mounted small fan on the chipset running at 4300rpm , this is about 5C over ambient temperature)
corecentre reads theese two sensors data right .
So does MBM5 5.3.7.0 is setup with wizard and right motherboard chosen.
Make sure that speedfan is setup to monitor :
Sensor Type - Winbond W83627THF (through ISA 290h)
Sensors winbond1 , winbond2-diode
Edit : From your first post :
CPU = 38C, and System = 34C
This is the two real connected sensors , the other with 14/16C is just a bogus reading.
Your last comment, that doesn't make sense with your other posts, because the temp sensors giving me the 34/38 readings are 2 and 3. Well you say only #1/#2 are tied to Winbond with 1=NB and 2=CPU. Well how is it that #1 is giving me bogus readings in Smartfan then?
I looked at the config for the Winbond, sensor 1 = thermistor diode, 2 = PII diode, and 3 = thermistor diode. THis is the defaults it came up with. Is this incorrect? If I change these settings at all I get some 110+ readings.

Config for small GW install

Similar Messages

Maybe you are looking for