Drag and Drop: Requiring All Answers

Hi All,
I'm new to Captivate (version 7) and I had a D&D question.
Currently this is letting the user advance after one right "drag", but I want them to have to drag all correct answers before moving to the next slide. How can this be done?
Thanks,
Jared

So check these:
1) For your images/shapes/whatever, under the "Properties" tab under "Timing", make sure that they're set to display for "Rest of slide" and appear after 0 seconds.
2) Under the "Drag and drop" tab, make sure that the "On success" button is set to "Continue". (You could also set it to "Pause" if you want it to display some type of feedback after they answer. If it's set to pause, you'll need another button or interaction that they press to continue.)
3) If you have other timed items or "Advanced actions" they could also interfere, so check those as well.

Similar Messages

  • Page Item Drag and Drop reset all items Displayed Field attribute

    If I use the Drag and Drop feature it resets all items Displayed/Field attribute to yes. Is this just the way it is and it is to bad so sad for Nicholas or is there something I can do to be able to use drag and drop and still retain my setting for the Item's Displayed/Field attribute.
    Any assitance is much appreciated

    Probably the easiest way would be to have 2 arrays that hold
    the data being sent to box A. Just add/or subtract from one that
    you don't care if it changes, and leave the other one alone. When
    you want to reset, just clear Array 2 and populate it again from
    Array 1. For Box B, just reset the contents of the array to nothing
    - myArrayB = new Array({item1:'',item2:''})

  • CS5 Bridge repeatedly crashing during drag and drop

    I've recently purchased Photoshop CS5 and I'm getting used to a new workflow using raw (DNG) images with my new camera. Since raw images pretty much must be browsed within Bridge (would be nice if Windows Explorer could recognize DNG files some day), I'm learning the ins and outs of working in Bridge.
    My problem has been repeated crashing of Bridge while sorting and moving around a bunch of images. I find it easier to view thumbnails in Bridge on one screen and use Windows Explorer on a second screen to create subfolders and as a place to drag-and-drop selected photos. I can usually move several groups of images to Windows Explorer before Bridge crashes but I'd say Bridge never runs for more than a minute or two between crashes. I've read a few other messages on this forum which have suggested holding down <ctrl> while starting Bridge to reset the preferences. That seems (though possibly coincidentally) to have changed the place where Bridge crashes from the StackHash module to the ntdll.dll module. The following is an example of the problem signature of one of these crashes in case this looks familiar or provides any sort of clue:
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: Bridge.exe
    Application Version: 4.0.2.1
    Application Timestamp: 4bff9363
    Fault Module Name: ntdll.dll
    Fault Module Version: 6.1.7600.16559
    Fault Module Timestamp: 4ba9b29c
    Exception Code: c0000005
    Exception Offset: 0002e25b
    OS Version: 6.1.7600.2.0.0.768.3
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    Before anybody suggests I am running Windows7 Home Premium (x64) with an Intel i7 CPU, 8GB of RAM and a 1TB hard drive. I have all the available updates applied to the CS5 software, my video driver, and Windows itself. The problem is persistent and repeatable and rebooting and closing down all other applications have no effect.
    Am I the only CS5 user in the known universe having such issues or are there known problems dragging and dropping with Bridge?

    Rabbit of Caerbannog wrote:
      I find it easier to view thumbnails in Bridge on one screen and use Windows Explorer on a second screen to create subfolders and as a place to drag-and-drop selected photos.
    This may be causing the problem.  Drag and drop requires more resources of the OS and video card.  Can you use "move or copy to" instead and see it that works?
    Also, I can see no reason to use Windows Explorer to create subfolders and your method to drag and drop may cause other problems.  If you move files with an XMP file attached make sure it moves with it. 
    I think you are making it more difficult that you need to.  Also, Win. Exp does not display thumbs of Raw images as you mentioned. 
    If you want 2 browsers open click File/new window and now you have 2 copies of Bridge open.  Put one on each monitor.
    If you enter ntdll.dll in a web search you will see it is somewhat of a gereric hard drive error.
    Hope this helps.

  • Illustrator Default PDF, if open in Acro Pro, drag and drop other .ai files, will they also....

    Hi! I'm trying to archive (for myself and others for easy access) about 50 fairly complex .ai files in a single Illustrator Default PDF and maintain editability and preserve layer and grouping integrity for every separate file, and, i'm probably going to have to do this hundreds of times (at least!) in the future. Once i save the initial first pdf file through Illustrator (wish didn't even have to do this, but seems no way to do in Bridge), then open the resulting pdf w Acrobat Pro, can i then just select an entire folder's worth of ai files in Bridge, drag and drop them into the pages panel and still have the dragged and dropped files also preserve all their AI info and layer/ group integrity? An if not, thinking if not based on 20 similar experiments, what's a fast way to do this. Doing this manually each time: opening each file in AI then saving as AI pdf, then combining and arranging them all after the fact, would be, well, fairly effed in terms of time, carpal tunnel, arthritis etc. Experimented w Bridge PDF Output batching (terrible rasterized lo-res results, but great for its intended purpose) and just dragging and dropping into Acrobat (lose complicated layer names and info, all flattened to single layer). Any help most appreciated, and as i do not have regular access to das interwebs  (i live on a boat) would appreciate and heed gentle admonishment if i've misposted or broached any community etiquette here. I've researched this as well as i can but can't find anything efficient/ elegant not involving InDesign, and even then the details are skimpy. Thank You! Getting mentally exhausted and not a little loopy. Keep in mind had to teach myself both Illustrator, Acrobat etc with access to the very limited offline help menus (the boat), so a complex answer involving learning InDesign would be learning curve can't even imagine with everything else struggling to do. But if you're willing to babystep diagram it out for me or can find me a link that does i will not only be eternally grateful but will do my durndest to master it and pass it on....Thanks Again! lil mc szpf
    PS If it helps I'm running the diligent dogged dusty beloved workhorse CS4 Design Premium on 27" monitor 2010 Mac (OS X 10.6.8), and took advantage of rare housesitting net access to install all most recent updates of everything, i'm barely competent w AI, PS, BR and been tackling Acrobat for past couple of months now....

    im glad that somebody is atleast trying. perhaps i need to be more clear.
    i will step by step describe the issue in detail.
    1) i open an email that contains an attachment .dxf or .pdf
    2) i click on the attachment shown in the email and aprompt comes up asking if i want to open or save the attachment.
    3) i select save. (by default it saves to a downloads folder. but i have also chosen to use other folders (when i did that it wouldnt save them)
    4) i highlight the downloads arrow on the right top side of my browser and click it
    5) it pulls down a list of the files that i USED to be able to click and drag onto my destop, or anyplace i chose
    6) used to be when i clicked and held the left mouse button down on top of a file of my choosing it would highlight and as i began to drag, a ghost image would appear of the file i was dragging. showing a (/) symbol next to it showing i couldnt drop the file within the browser and a + simbol showing that i could drop the file when the file was hovering over a place where i could drop the file such as my desktop or other folder. now, when i click and hold on the file.... I DONT get anything. when i drag. nothing follows. while i am "dragging" in the area that is my browser, i get the pointy finger icon. as soon as i enter an area where i could have dropped the file as before, i get my standard cursor arrow.
    its really as if the drag and drop feature just dosent work IN FIREFOX.
    i can drag and drop files all day long everyplace else.

  • I am no longer able to drag and drop my downloaded files

    in yahoo. i, on a daily basis receive about 10 pdf documents and several .dxf files. also autocad .dwg files and jpg files. pretty much any file i have to work with comes to me in my email.
    i used to be able to select the file, then download it. after i was done downloading it i could open my download library, and drag and drop the file onto my desktop or other open folder on my pc.
    suddenly. i cannot.
    i have changed browsers for the time being and will not be able to continue with firefox until this is solved.
    i am running firefox 20.0.1 and windows vista sp1

    im glad that somebody is atleast trying. perhaps i need to be more clear.
    i will step by step describe the issue in detail.
    1) i open an email that contains an attachment .dxf or .pdf
    2) i click on the attachment shown in the email and aprompt comes up asking if i want to open or save the attachment.
    3) i select save. (by default it saves to a downloads folder. but i have also chosen to use other folders (when i did that it wouldnt save them)
    4) i highlight the downloads arrow on the right top side of my browser and click it
    5) it pulls down a list of the files that i USED to be able to click and drag onto my destop, or anyplace i chose
    6) used to be when i clicked and held the left mouse button down on top of a file of my choosing it would highlight and as i began to drag, a ghost image would appear of the file i was dragging. showing a (/) symbol next to it showing i couldnt drop the file within the browser and a + simbol showing that i could drop the file when the file was hovering over a place where i could drop the file such as my desktop or other folder. now, when i click and hold on the file.... I DONT get anything. when i drag. nothing follows. while i am "dragging" in the area that is my browser, i get the pointy finger icon. as soon as i enter an area where i could have dropped the file as before, i get my standard cursor arrow.
    its really as if the drag and drop feature just dosent work IN FIREFOX.
    i can drag and drop files all day long everyplace else.

  • Drag and Drop in List View

    When in the List view in Finder, I would like to drag and drop a folder in Terminal to cd to that path. However, it does not appear that List view allows dragging and dropping at all even to copy files within Finder. Is it by design? I like List view because it allows me to see the tree view of folders like in Windows Explorer. Thanks.

    Works here. I've never had any issue selecting anything in list view (the only one I ever use in Finder windows) and dragging & dropping into a Terminal window and getting its path. Create a new admin user account, log into it, and see if the behavior persists.

  • Drag and Drop as an Assessment in Captivate 7

    Hello-
    I am having an extreme amount of difficulty when it comes to using this function in Captivate 7. The following is a list of questions that I cannot seem to find the answer to anywhere online.
    After assigning the answers (as in which box gets dragged to the other), I saw that even though I have 5 separate boxes and therefore 5 separate answers, the quiz results only count this entire drag and drop as one answer. How do I set it so that each drag and drop within the slide is an individual point to add up to a total of 5 points?
    I am very confused as to how to set up the failure box-I only want it to show up when people go back to review their quiz. I also have this problem with all other quizzes, as well as the "review area" box.
    If someone, or multiple people, could please answer these, and not just link to another page with the answers, I would greatly appreciate it! Thank you!
    Nat

    Unless you need HTML5 outpu, I would suggest looking into these widgets:
    http://www.infosemantics.com.au/adobe-captivate-widgets/drag-and-drop/which-adobe-drag-and -drag-and-drop-widget-comparison
    Free trial versions for download here if you want to test:
    http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets

  • Drag and Drop to Forms

    Hi OraTechies,
    Can anyone give some insight to my problem.
    The apps is written with Forms 6.0 and deploy in client server architecture. Soon, to be web enabled.
    In production, a user constantly complain about lost data. We found out he was dragging text/data from MS-Word document and dropping to a field in a multi-record forms. When record is saved and re-queried the data is not there.
    The drag and drop shows the data is being copied to the field. If the record is cleared without saving, the dragged over text is "hovering" over the field. It looks like Windows just repainted the display and nothing else.
    Comments, suggestions or solutions anyone?
    Cheers,
    AC-NZ

    Francois,
    I have tried to implement this bean but I'm having problems. I've been using your
    LAF package for almost 4 years now without issue. I tried the jar file from the zip
    file. I also created a new project and recompiled the java code against the 10.1.2.3
    frmall.jar file that matches our app server. I resigned it and it's still not working.
    Maybe I'm just missing something simple. When I compile and run the form, I see
    the canvas and I can change the text fields, but I don't see how I can drag and
    drop items. Hopefully, you can think of something that can fix our problem. I would
    love to be able to use drag and drop functionality in an upcoming application.
    We're running the following versions:
    App Server: 10.1.2.3
    DB: 10.2.0.5
    JDev: 10.1.3.3.0
    Windows XP for the clients
    Windows Server 2008 for the servers
    Thanks,
    Jason
    Edit: I looked in my java console and saw that my issue was that we signed this jar file with a different certificate. I created a special config as Francois has suggested in another post and included only the DnD.jar file and it worked. However, I can't get the image or multi-line text areas to drag and drop. I'll keep poking around and see if I can figure out what's going on. The console seems to recognize when I'm dragging and dropping from all fields.
    Edited by: hanszarkov on Jun 27, 2011 12:58 PM

  • Preview Drag and Drop Issue

    I use preview in school a lot. Converting lectures to PDF is a lot easier to use and i us a program called iFlash to make flash cards.
    What I want to do is use the text tool to highlight sections of text, drag them to the flash card window and then drop the text there. This is a really quick and easy way to make the flash cards.
    This works except when i click back to the card all the text that i dragged is deleted.
    Does anyone else have this issue. I have checked, this feature (highlight and drag...) works well in other programs (mail, pages) but not with my flash card program.
    Any ideas?

    I have checked, this feature (highlight and drag...) works well in other programs (mail, pages) but not with my flash card program.
    That suggests that the problem is with iFlash. Will it accept drags from other programs, besides Preview? If not, it probably doesn't support drag and drop at all. If it does, then its implementation is probably buggy, and you should contact the developer.

  • HT203175 drag and drop not working desperate for help

    Can you possibly help me with my drag and drop?
    All of a sudden itunes won't let me drag purchased tracks or tracks from library on to my ipod. I have read you need to make sure you have checked manually manage music and videos and I have done that. It worked one minute and now has stopped. I don't understand why drag and drop has just been fine then suddenly stopped working.
    Thanks.

    Oh right... All my devices are on the SAN and have been set as edit-in-place. The files in question were copied from the regular media watch folder to the media device. So basically just one folder on the SAN to another.
    It has to be more than just the watcher, because two of the files in question were added by a subscription response that has worked fine for me before.
    Thanks,
    Mario

  • [ASK] Show Object with Drag and Drop Condition

    Hello guys,
    I just finished making my simple drag and drop quiz which i've already mentioned in the previous thread. But i still have a problem. I've searched through the Internet, but i didn't find any case similar with my case.
    Please take a look at this picture :
    I want to hide the "nextbutton" (D button) then show (unhide) the button with some conditions, here are the conditions :
    If "p=>~q" square dragged on "A" white square && "~q" square dragged on "B" white square && "~p" square dragged on "C" white square then,
    Button D = visible
    else
    Button D = not visible
    How can i do this in actionscript 3.0?
    Any help would be appreciated. Thank you very much.

    I'm sorry, i haven't told you that i've already tried to do it with hitTestObject function, but it doesn't work, the D button never shows up even i dragged the squares on the right spot, here is some of the actionscript :
    Square_4 = pnotq
    Square_5 = notq
    Square_1 = notp
    /* Stop at This Frame
    The Flash timeline will stop/pause at the frame where you insert this code.
    Can also be used to stop/pause the timeline of movieclips.
    stop();
    //Hide and Show Actionscript
    if(Square_4.hitTestObject(Target_2) && Square_5.hitTestObject(Target_1) && Square_1.hitTestObject(Target_3)){
    Next.visible=true;
    } else {
    Next.visible=false;
    //ButtonMode Actionscript
    Square_1.buttonMode = true;
    Square_4.buttonMode = true;
    Square_5.buttonMode = true;
    //Some part of the Drag and Drop Actionscript
    (I made drag and drop for all the squares (1-7))
    var startX:Number;
    var startY:Number;
    Square_4.addEventListener(MouseEvent.MOUSE_DOWN, pickMe);
    Square_4.addEventListener(MouseEvent.MOUSE_UP, dropMe);
    function pickMe(event:MouseEvent):void {
        event.target.startDrag(true);
        startX = event.target.x;
        startY = event.target.y;
    function dropMe(event:MouseEvent):void {
        event.target.stopDrag();
        var myTargetName:String = "target" + event.target.name;
        var myTarget:DisplayObject = getChildByName(myTargetName);
        if (event.target.dropTarget != null && event.target.dropTarget.parent == Target_2){
            event.target.removeEventListener(MouseEvent.MOUSE_DOWN, pickMe);
            event.target.removeEventListener(MouseEvent.MOUSE_UP, dropMe);
            event.target.buttonMode = false;
            event.target.x = Target_2.x;
            event.target.y = Target_2.y;
        } else {
            event.target.x = startX;
            event.target.y = startY;

  • HT203106 Is there a way to just connect my phone to my laptop and drag and drop the photos onto my laptop?

    i just recently updated my laptop to yosemite and i'm looking for a way to quickly upload all my photos onto my laptop so i can clean out space on my phone.  i'm seeing that i can use air drop, but is there a better way?  i just want to drag and drop them all onto my laptop like i was able to do before... please help!

    Image Capture would be the way to do if you are not using iPhoto or Aperture.

  • Allow Drag-and-drop Sorting of Your Music

    With playlists, I love how you can drag and drop tracks to rearrange your playlist.
    However, I've noticed the only sortings you can have for Your Music (songs) are by the titles (track, artist, time, album, added). For Albums and Artists, the only sortings possible are alphabetical, recently added, or most played. I'd really love to rearrange songs myself so my favorites are always on top.
    Spotify should have let users drag and drop to rearrange songs in Your Music (songs) just like we can for regular playlists. This feature should also be extended to songs shown once you select an albums or artist under Your Music.

     The remove op the drag and drop an all other ways to simply move tracks up and down in  a playlist or between playlist  is theworst improvment EVER.You must be able to customize the play order in a playlist. The QUEUE idear is toaly reduclus an very confusing!! Uptil this spring it was easy to set the order tracks played within a play listnow its a total nightmare

  • Drag and drop questions in scjp

    hi all,
    i m planning to write scjp this month..
    can anyone tell me what 'drag n drop' questions like?
    and what kind of questions are generally asked?

    Well you can't change your answer for the drag and drop i mean you can but if you try to go back and try to see your question again for drag and drop then your answer is going to be deleted and then you had to redo the whole thing.
    So i suggest please make your decision at the same time. Drag and drop are not hard i mean something like this
    System.out.printf("Pi is approxmicately", Math.PI);
    Pi is approximately ______
    Place the value for PI 3.14
    3.145
    Something like that Good luck

  • HTML5 matching quiz drag and drop reveals TOC menu

    Hi,
    Not sure if this has been reported as a problem converting Captivate 7 lessons to HTML5.
    In several lessons there are Matching quizzes which allow drag and drop of the answer to a blank in the text or selection from the drop down menu by matching numbers in the text.
    Here is a link to an example lesson containing a Matching quiz. The quiz is on slide 5. The easiest way to get there directly is to use the TOC Menu to navigate to "Test What You've Learned".
    http://www.djfilms.ca/NRCan/HTML5/Lesson1.1_v7.2_H5/
    If the user trys to drag the answer on an iPad 2 the TOC menu also appears from the left of the screen.  This seems to be a problem related to gestures.
    Does anyone know of a way to solve the problem or is this something that Adobe has to fix?
    Thanks,
    Richard

    Anyone know where one can purchase the code/template for a drag and drop quiz in html?
    Thanks,
    k

Maybe you are looking for