Product Drill Down Reporting and Using KKC7/KKC8 & KKRV

Hello Guys,
Need some expert advise on my issue.
1. I have created a product group using T-code KKC7 and assigned materials to my product group.
2. I have done some material movement posting using 261 on these materials.
3. Next I run KKRV to collect data
4. Next I run Report S_ALR_87013139
I expect to see drill down report by product group but I dont see anything?
Is there something else which needs to be set?
In spro I have checked reporting control parameters and its all good.
Please share your thoughts.
Regards,
Sanjeev

Dear Sanjeev,
Did you get an error or information message when you execute S_ALR_87013139?
Best regards,
Jason

Similar Messages

Drill down report without using heirarchies in OBIEE11g

Hi,
Can we create multiple column drill down report without using hierarchies in OBIEE11g?
Kindly let me know the solution.
Thank you!
-Harshith

Yes, It can be done, but for each drill level you will require one seperate report. Drilling can be achieved using OBIEE Report Navigation.
For eg. If I have to create a drill report which starts from Year and goes to QTR and then to Month level. That means I have to create 3 reports.
1. A year report which will have report data at year level (Consider Year, Product, Order_QTY and Order_Amt are the columns)
2. A QTR report which will have report data at Qtr level. This report will have Year column in filter section as IS PROMPTED (Consider Qtr, Product, Order_QTY and Order_Amt are the columns).
3. A Monthly report which will have report data at Month level. This report will have Year, Qtr column in filter section as IS PROMPTED (Consider Month, Product, Order_QTY and Order_Amt are the columns).
Then we can go to Yearly report and put the OBIEE navigation on Year column and our target report will be QTR report. Similarly in Qtrly report put the OBIEE navigation on QTR column and our Target report will be Monthly report.
This way you can impliment drilling without hierarchy.
For step by step see below URL:
http://www.askjohnobiee.com/2012/07/how-to-drill-through-guided-navigation.html
Appriciate if you can mark Correct.
Thanks,
Kashi
Edited by: K N Yadav on 4 Jun, 2013 10:27 PM

Drill Down Reports and Drag & Drop capability Tool for Developer2000

I am currently doing my development in Developer2000 rel. 2.0.
I have seen many tools for VB which provide the facility for Drill Down reporting and drag & drop option in reporting, but unable to find any tool for developer2000. I wonder if anyone can guide me about any tool for developer2000 which can provide these facilities in reporting and forms.......
Qamar Bilal

you can use the mouse triggers to do drag and drop.
you have mouse-move and mouse-enter etc...
what do you mean by drill down?
you can do drill down reporting in reports by using srw.run_report built in and you can also use oracle discoverer.

Difference between Drill down Report and Interactive Report

What is the difference between Drill down Report and Interactive Report?

Hi,
Drill down report and Interactive report seems to be acts as same. But there is a minor difference between those two.
Drill Down Report - When you click on a particular field in a report it drills down to the next report, it won't trigger another screen.
Interactive Report - When you click on a particular field in a report it will trigger another report based on the field clicked. It opens another session internally in the same screen.
Regards,
Jayaram...

How to run drill down reports

now i am using 9ids
Before dev 2.1 was used.
now before we had provision to run drill reports
by putting a button on report
and using
srw.run_report(); procedure ,in button action trigger.
now in 9i what i observed there is no object button in reports.
button has changed to text item and there is no such action trigger.
how to run the report
as reports are run from form by using
web.show_document
pls suggest.

Hi Rajendra,
Again prasanth here, As u said, there is no more push button in 9i and 10g, ok. so u can drill down reports by using hyperliks which is only way(according to me). some may suggest to include JSP buttons. But u can simply place any text item like 'click here to run report' and in the property inspector(i.e.property pallette) set the hyper link property with the desination of your file. It may be a weblink or may be local file path.
example
hyperlink: www.oracle.com/..or
c:\temp\test.rdf
or u can write a trigger for that text item:
1)right clik the text item
2)goto pl/sql editor
3)put the code
a varchar(30);
begin
a:=srw_run_report('<the report link you want')
return(a);
but before doing this make sure that the item type of tha t text item property should be pl/sql(this can be set in property pallete of that text item)
I think this help you,
Thanks and Regards
Prasanth A.S.

Drill Down Reports - Very Urgent

I have the following situation.
I want to create a drill down report and pass parameters from the
master report to the detail.
I built 2 simple tabular reports Drill1 (master) and Drill2 (detail). I have placed a button in the repeating frame of the Drill1 report, and I wrote the following code in its trigger:
srw.run_report('report=DRILL2');
I have tested the report and it works just fine.
But .... I want to pass as a parameter to the second report the value of a field. According to the documentation I shall change the button trigger to
srw.run_report('report=DRILL2 paramform=No p_1=''' || :field1 || ''''); -- (the value is a string)
I did so but it gives me the REP-0159 error. Am I doing something wrong?
Note that I am using reports version 6.8.12.1
Thanks
Ioanna

hi Ioanna,
The Problem seems to be with the quotes in your srw.run_report command line . The appropriate commandline should be
srw.run_report('report=DRILL2 paramform=No p_1='||:field1||' ... <rest of the cmd line >');
( note the quotes before / after ||:fie1d1|| .. )
Regards
Oracle Reports Team

Drill down report in ALV

Hi Friends,
i am developing drill down report by using REUSE_ALV_GRID_DISPLAY FM. it is working fine for ME23N transaction. here parameter id is BES. for that i am using following syntax.
set parameter id 'BES' field <clicked field value>
call transaction 'ME23N' and skip first screen.
Now, same for scheduling agreement ME33L, Here parameter id is VRT. but here clicked value is not populating in ME33L transaction field. I think here parameter id should be different.
Does anybody have an any idea? please let me know.
Thanks in advance,
Parag

Hi Parag!
I am encountering the same problem with you.
Here's my code and as you've said..its working in ME23N but not in ME33L.
FORM ebeln USING selfield_value LIKE v_selfield-value.
DATA: l_bstyp TYPE c.
READ TABLE i_output INTO x_output with key ebeln = selfield_value.
l_bstyp = x_output-bstyp.
IF l_bstyp = c_f.
SET PARAMETER ID 'BES' FIELD selfield_value.
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
IF sy-subrc = 0.
do nothing.
ENDIF.
ELSEIF l_bstyp = c_l.
SET PARAMETER ID 'VRT' FIELD selfield_value.
CALL TRANSACTION 'ME33L' AND SKIP FIRST SCREEN.
IF sy-subrc = 0.
do nothing.
ENDIF.
ENDIF.
ENDFORM. " EBELN
Have you resolved the problem?

Transport drill down report

Dear Friends,
I created a drill down report and generate a tranport number but it wasn't transproted successfully.
Did I miss something?
Thanks,
Linda

Check in SE10 transaction is your transport request is available.If it is not transported properly then to Transport transport request
In SE10 transaction first you need to transport transport request task (You need to select truck Icon release immediatlt( F9 )) then you have to transport main request.

Drill Down Report using Crystal reports in eclipse and jspviewer

Hi
I want to understand how to write a drill down report since I have a requirement for my project, so I tried to run the sample drill down.rpt that is available with Crystal Reports 2008 Complete Reference book by George Peck.
I can see the results correctly( i.e. can drill down) in the preview tab . Since I am working inside the eclipse, the way I run the reports is first "Create report viewer JSP" by right clicking the report and have a url mapping to this jsp. I am running the reports from a hyperlink that maps to the url which will launch the jsp.
the jsp is:-
<%@ page contentType="text/html; charset=UTF-8" pageEncoding="ISO-8859-1" %><%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer" %><crviewer:viewer reportSourceType="reportingComponent" viewerName="Drill Down-viewer" reportSourceVar="Drill Down" isOwnPage="true" allowDrillDown="true">
 <crviewer:report reportName="reports/Drill Down.rpt" />
</crviewer:viewer>
The one that was created by "Create report viewer JSP" did not had "allowDrillDown" attribute at all .But I added it since it isnt working.
So when I launch my web app and click on the link to run the report, I get the report results but only to the summary level. When I double click the summary level I get a 404 error page.
Can please anyone suggest what is going on.
Thanks
poonam

Ok. So, you added the report to the project. Now we have to add the CR assemblies to the project, add the viewer (if need be) and fire it off. Simplest code would be:
Public Sub New()
 ' This call is required by the designer.
 InitializeComponent()
 ' Add any initialization after the InitializeComponent() call.
 CrystalReportViewer1.ReportSource = ("path to report")
 End Sub
In this case you are using the viewer SDK to runt he report. The report will prompt for any logon parameters - but you can code these also. You can load the report via the engine as bellow. Again, the report will prompt. I prefer to use the engine as it is way more "extensible"...
Public Sub New()
 ' This call is required by the designer.
 InitializeComponent()
 ' Add any initialization after the InitializeComponent() call.
 Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
 crReportDocument.Load("path to report")
 'Bind the report to the viewer
 CrystalReportViewer1.ReportSource = crReportDocument
 End Sub
If you have a report added to the project (strongly typed) the code would be:
CrystalReportViewer1.ReportSource = New myReport()
For more details, I'd recommend looking at the sample app vbnet_win_simplepreviewreport.zip available from the following location:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
The developer help files are here:
[SAP Crystal Reports .NET SDK Developer Guide|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_dg_2010_en.zip]
[SAP Crystal Reports .NET API Guide|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_api_2010_en.zip]
- Ludek

Use different Layouts for Summary and Details in Drill down report

Hi All,
I have a 2 level drill down report in ALV.
The summary report has certain fields and the Detail report has different fields. Now my problem is that when i use a default layout (with all fields of summary report) for the summary report, and drill down to the detail report i'm missing the fields on detail that are not in Summary. And if i save the default layout as default (with all fields of Detail) and go back to sumary, I'm missing the some other fields on summary (which are not on detail report).
Is there a way to make different default layouts for each of those summary and detail reports:
Also as the layouts are choosen by the user, i cannot hardcode any particular layout;
So if the user chooses a layout for detail; it has to stay the same layout for the detail report if he goes to summary and then back to detail; unless the user changes the layout again.
I'm using two different Layout types for each report. but i still cannot get the desired effect.
Data:
 gt_layout_s type slis_layout_alv,
 gt_layout_d type slis_layout_alv,
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = g_repid
 is_layout = gt_layout_s
 i_callback_top_of_page = g_top_of_page
 i_callback_user_command = g_user_command
 i_callback_pf_status_set = g_status
 i_save = g_save
 is_variant = gs_variant
 it_fieldcat = gt_fieldcat[]
 it_events = gt_events[]
 importing
 es_exit_caused_by_user = gs_exit_caused_by_user
 tables
 t_outtab = it_summary.
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = g_repid
 is_layout = gt_layout_d
 i_callback_top_of_page = g_top_of_page
 i_callback_user_command = g_user_command
 i_callback_pf_status_set = g_status
 i_save = g_save
 is_variant = gs_variant
 it_fieldcat = gt_fieldcat[]
 it_events = gt_events[]
 importing
 es_exit_caused_by_user = gs_exit_caused_by_user
 tables
 t_outtab = it_detail_disp.

Here is how you differentiate between the layout of two different grids. There is the parameter, IS_VARIANT in the function. You usually leave it empty or pass only the report name and username. What you need to do is to pass unique string for each grids to the HANDLE field of the parameter IS_VARIANT. You can probably hard code it as HEADER and DETAILS in your case. Once that is done, system identified that these two different layout for different grids.
Regards,
Ravi
Note : Please mark all the helpful answers

Customized drill-down report cannot go to line item level (FGI4 and FGI1)

Hi Expert,
I created a customized drill-down report using New GL features, as follows:
FGI4 create form, with reference to form: 0SAPBLNCE-01
FGI1 create report for the form created.
After that I set some things like characteristic, variables, and output type.
When I execute the report, the data shown cannot be drill-down to line item level:
Goto > Line Item (this function is disabled).
Kindly advise why I cannot goto line item level, where I copy from standard form: 0SAPBLNCE-01, which ha sthe features of drill-down to line item level.
Thanks
sbmel

Hi sbmel,
For calling up a line item report in a drill down report you need to make the below settins:-
- You first have to generate the line item report with program RGRGENSI for your summary table.
- Then assign the generated line item report to the summary report.
Assiging the report is part of the 'Change drilldown report' function, which you reach by activating the characteristic selection field and then Extras -> Report assignment.
In the dialog box that appears, choose the 'Other report type' function and insert the line item report generated earlier, as an ABAP report
Regards,
Gaurav
Edited by: gka2707 on Jul 19, 2010 8:07 AM

Drill down reports using SVG component

I've created and dynamic report and an SVG chart following the examples of the tutorials. I was wondering if, and how, it was possible to create drill-down reports i.e report on colour, then clicking on that colour would reveal the types of car and so on. Does anyone have an example?
Thanks
Darren

Darren,
The query for an SVG chart requires 3 columns: Link, Label, and Value. You use the Link value to provide a link to another page. This link can also pass parameters to the next page.
If you set up a page for each "level" of your drill-down (e.g. color, type of car, etc), you can link from the higher-level page to the lower level page and pass the value that was clicked on in the chart.
Take a look in the HTML DB User's Guide for the section about "Using f?p Syntax to Link Pages": http://download-west.oracle.com/docs/cd/B14117_01/appdev.101/b10992/mvl_fund.htm#BEIJCIAG
You would use that syntax in the Link column of the query for your chart. Here is part of a query I used to drill down from one pie char to another (on page 3), passing the selected project to a variable called P3_PROJECT.
select 'f?p=&APP_ID.:3:&SESSION.::NO::P3_PROJECT:' || Project L,
Project, sum(Time)
from v_timesheet
where ...
Does that help?

Drill Down report using Webdynpro

Hi Guys,
Is it possible to develope a drill down report in Webdynpro?
If yes, can somobody direct me to any tutorial for creating Drill Down Webdynpro Report.
I need to convert an ABAP drill down report to Webdynpro Drill Drown.
Thanks,
mini

Hello,
Yes, it's possible, using the linktoaction element please see this: [/people/david.halitsky/blog/2006/09/22/learning-what-you-dont-need-is-as-important-as-learning-what-you-do-parts-10b-c-of-event-driven-tutorial-on-wdrtestuielements] and [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/db22242d-0701-0010-28a2-aeaa1fefd706].
Regards.

How to call a drill down report using hyperlink ?

Can anyone please give an example to call a drill down report using hyper link in Reports 10g ?
Regards
Capri !!!

Hi,
I've been using this approach in a couple of reports and it works great with one problem. Even if I include the srw.set_hyperlink_attr('target=_new") it still launches the drill report in the current window. When the user hits the back button it doesn't take them back to the main report it takes them back to the reports/rwservlet? page. Can you see if there is anything I'm doing wrong...would be a really cool report if I could force it to open a new window.
Here is what my code looks like:
srw.set_hyperlink(:P_SERVER || 'dwn&report=transaction2_v8.rdf' ||
'&PARAM_COMP_NUM=1' || '&PARAM_ACTV1=' || TRIM(:actvty_cd) || '&PARAM_ACTV2=&PARAM_ACTV3=&PARAM_ACTV4=&PARAM_ACTV5=&PARAM_ACTV6=' ||
'&PARAM_START_DATE=&PARAM_END_DATE=' || '&PARAM_FY_NUM=' || vYear || '&PARAM_PERIOD=0' || '&PARAM_ACTVTY_GRP=%20' ||
'&PARAM_LIST=%20' || '&PARAM_START_ACCT_CAT=' || TRIM(vCat) || '&PARAM_END_ACCT_CAT=' || trim(vCat2)|| '&PARAM_SYS_CODE=%20' ||
'&PARAM_SRC_CODE=%20' || '&PARAM_DATA_TYPE_CD=P' || '&PARAM_ACT_STATUS=%20');
SRW.SET_TEXT_COLOR('blue');
srw.set_hyperlink_attrs('target=_new');
Also I get different behavior if the user saves the PDF and opens the report through their pdf reader.
Thanks for your help

How to add the required characterists and key figures to drill down report?

hi,
i am creating a drill down report using t.code FKI4. however i noticed that some of the characteristics and key figures required by me is not listed in the report catalog. how can i add the required characteristis and key figures to the report catalog?

Hi Inna,
Based on my research, a drilldown report is a layout design that at first hides complexity and enables the user to toggle conditionally hidden report items to control how much detail data they want to see. Drilldown reports are used to change the report
layout interactively. So it wouldn’t affect the rows displayed in the outmost group. Though some rows are hidden when the report is initially run, it will still count them. This is by design.
Furthermore, if I understand correctly, you also expect the outmost group is a dynamic group depends on the drilldown action, right? As per my understanding, this function still cannot be achieved at this moment.
Thanks for your understanding.
Regards,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Product Drill Down Reporting and Using KKC7/KKC8 & KKRV

Similar Messages

Maybe you are looking for