Drill Down when data is coming from a query
Hello experts,
I have one question regarding the drill down functionality. For sake of simplicity, let's assume we are working on a pie chart.
i) Data is coming from a query (via the universe).
ii) The data source is really the query itself, it is not coming from the excel sheet. In other words, the query is not first copied to the excel sheet and then fed to the pie chart. Pie chart directly uses the query binding.
ii) When a slice in the pie is clicked, I want to copy that slice's information into a cell (basically the drill-down functionality).
I wasn't able to achieve this functionality. I think the problem is the 'source data' field in the 'insertion' tab. I select 'Row' as my insertion type and I also select a destination. However, when it comes to selecting 'source data' I have nowhere to point to since my source data is the query (query binding is not an option here). So, since I have no real source data, I cannot drill down and copy the values to the destination cell.
The workaround is to copy the query data into excel first, but I don't that is an elegant solution. Is there any other way to achieve this?
Regards,
Guven.
Hello David,
You confirm that mapping the whole column would be an option, right?
Here is why I asked this question: Let's assume I have a dashboard that displays the types of encounters in a hospital. Some examples of encounter types are: emergency, elective, newborn, etc... Currently, in the database, there is data for these 3 types. So, the dashboard contains a pie chart and each slice corresponds to the number of visits by patients for this encounter type (e.g. 450 emergency encounters, 9900 elective encounters and 32 newborn encounters).
Tomorrow, a new encounter type could take place in the hospital and this of course has to be reflected in the dashboard. If I make the assumption that there are only 3 encounter types, then the dasboard would be missing information. So, in this case, should I be mapping the whole column to the pie chart?
Regards,
Guven.
Similar Messages
-
Error while drilling down the data from reports
Hi friends,
I have created dimension hierarchies in rpd for drilling down the data.. While i drill down its showing no results at some level when i am clicking on the data.. but when i am clicking on the same levels column header its drilling down properly and i can view the next level for the data item which has shown no results while clicked on it.. Please help me and helps will be appreciated..Hi,
>when i click on 2000 results displaying is no results
but when i click on the header year its showing the results with 3 for 2000.
So you are able to drill when you click on header..Go to column properties and make heading interaction to no interaction under column format,put value interaction to default and try to drill clicking on value.
in RPD i have some derived columns like month .I created month as derived column from date using logical formula and i used this derived columns as the key.. Is it a problem?No I dont think its a problem
Regards,
Srikanth -
Where is Data Usage coming from in Wi-Fi environment??
I'm using new iPhone. In less than 3 hours I accumulated some 1.8 MB of Data Usage, eventhough I'm on Wi-Fi network.
Any advice will be appreciated!I don't understand what cross posting means. It's the first time I ever tried to ask a question. I only wanted to understand why my son's data is being used up when we have wifi. I guess I don't understand the whole process of trying to ask a simple question. I guess I'll have to just call verizon.
Date: Sat, 15 Dec 2012 14:30:52 -0700
From: [email protected]
To: <Email address removed for privacy per the Verizon Wireless Terms of Service.>
Subject: Re: Where is Data Usage coming from in Wi-Fi environment?? - Re: Where is Data Usage coming from in Wi-Fi environment??
Message was edited by: Verizon Moderator -
How to find out when data was deleted from table in oracle and Who deleted that
HI Experts,
Help me for below query:
how to find out when data was deleted from table in oracle and Who deleted that ?
I did that to fidn out some data from dba_tab_modifications, but I m not sure that what timestamp shows, wether it shows for update,insert or delete time ?
SQL> select TABLE_OWNER,TABLE_NAME,INSERTS,UPDATES,DELETES,TIMESTAMP,DROP_SEGMENTS,TRUNCATED from dba_tab_modifications where TABLE_NAME='F9001';
TABLE_OWNER TABLE_NAME INSERTS UPDATES DELETES TIMESTAMP DROP_SEGMENTS TRU
PRODCTL F9001 1683 46 2171 11-12-13 18:23:39 0 NO
Audit is enable in my enviroment?
customer is facing the issue and data missing in the table and I told him that yes there is a delete at 11-12-13 18:23:39 in table after seeing the DELETS column and timestamp in dba_tab_modifications, but not sure I am right or not
SQL> show parameter audit
NAME TYPE VALUE
audit_file_dest string /oracle/admin/pbowe/adump
audit_sys_operations boolean TRUE
audit_syslog_level string
audit_trail string DB, EXTENDED
please help
Thanks
SamLOGMiner --> Using LogMiner to Analyze Redo Log Files
AUDIT --> Configuring and Administering Auditing -
Alert Drill Down - DRAFT and ADDED Documnts - Using UNION Query
Hi,
I want to be able to send and alert that allows drill down when the alert includes DRAFT and ADDED doc's
My alert query uses UNIONs for the draft table and ADDED type documents, selecting a dummy draft number for ADDED doc.
--EXTRACT
select
--For DRAFTs
T0.DocEntry as 'Draft_No',
'' as 'Doc_No',
'Draft' as 'Type', ---etc. etc.
From ODRF
UNION
---For ADDED
select
(select min(docentry) from ODRF) as 'Draft_No',
T0.Docnum as 'Doc_No',
'ADDED' as 'Type', -
etc etc
From ORDR
Sample :DRAFT = 2 is dummy
Draft_No Doc_No Type Draft Status Cust/Vend Doc_Type Line Type Approval_Status
2 121095 ADDED N/A NPO-PORT Sales Order Item Approved
811 0 Draft Open ADT AP Invoice Service Approved
Thanks you for any help on this issue.
EricHi Eric,
This is impossible. Simply because, once you are using Union, drill down will no longer work.
Thanks,
Gordon -
How to drill down when chart data = 0 ? (link to image attached)
Hi,
I've been trying to solve this issue for several time now: when i have a chart that contains additional data but the top-level data=0, the user is unable to click/hover to drill down and extract the 2nd level data.
https://docs.google.com/drawings/pub?id=1m30dxKe3PlMOJSIOV7CYsk_P1aLBRFqcVd2P1Xj_too&w=960&h=720
In the example above, the value boxes contain the 2nd level data that was drilled from the chart (The issue is with product E)
thanks
Edited by: Yair Gat on Dec 2, 2010 3:32 PMDownload this Drill Down.xlf file from here
[http://boprofessionals.com/posts/xcelsius/2/Drill%20Down.xlf]
rename it to xlf if its been as zip.
run it into your xcelsius
click on the chart Category labels (A, B, C, D, E)
good luck
Amr -
Data not coming from DOE to Mobile After defining Rule for device attribute
Hi All,
I have created a DO and rule for it.In case of Bulk Rule for all definition when i triggere extract from Portal then all the data comes to outbound queue but when i define rule for Device attribute then no data comes to my Outboun queue.Here is the scenario what i am doing :
1. I have order header in my backend which has a field named "Work_Center" and this will be criteria field.
2. In CDS table i have all the records for all the work center.
3. Now in RMM under customized , i have added an attribute named "Work_center".
4. Now i defined a rule with Device attribute mapping and activated the rule.
5. Now on Portal i assigned this data object and in the device attribute tab i assigned the value(this value exist in CDS table for few orders) of a Work center to the attribute "Work_Center" .
6. Then i triggrere extract but its Outbound queue is empty, what could be the reason.
Is my approach is correct
Regards,
AbhishekHi Abhishek,
You can check one ore thing, after you have performed all the steps till step 5, i.e. just before triggering
extract. Check if the AT table for ur DO has entries based on the criteria specified by you...
1. In the workbench click on the Data Object, and then right click and select "View Metadata".
2. Select Distribution Model tab.
3. Now select your DO's Association table.
4. For the input field DEVICE ID specify your corresponing device id,and also for status field specify it
as "I" and execute
If there are any entries now in the AT table, and on triggering extract if they are not coming to the
outbound Q there is some EXTRACT Q blocked. And is there were no entries in the AT then the rule
specified is not the satifying.
Thanks,
Swarna
Now if you have entries w -
Printing Supressed (Drill Down OK) Data
Post Author: JHemauer
CA Forum: Charts and Graphs
I have a report posted on CR.com that has a bar graph with suppressed sections (drill down ok). The posted report is pretty to look at, and handy to drill down into the detail, but how can I set it up so that when my users want to print the report, the printed version shows all detail?
I'm a little new, and self taught so any help would be apprecdiated . . .
Jim HemauerYou cannot get the drilldown data in same page. When you drilldown it will be opened in a separate tab, this is by design.
Regards,
Raghavendra -
Looking For Method Of Displaying Drill-Down Subreport Data On Same Page
Not sure what the technical term for this is, but I need to find a way to display dynamic drill-down sub-report data within a report. Here is an example of what I am trying to accomplish:
+ DATA SUMMARY 1
+ DATA SUMMARY 1
- DATA SUMMARY 1
data detail 11
data detail 12
- DATA SUMMARY 2
data detail 2
data detail 2
The idea is you click on the + (plus sign) and the subreport detail unfolds below the summary row. To close the sub-report data, you click on the - (minus sign). Right now, the report pops up the sub-report data in a separate tab, which is not what the client wants.
Fuskie
Who doesn't know if this is a function of report design or of viewer manipulation of report data...I think this is called In Place Drill Down.
Fuskie
Who appreciates y'alls help.... -
IBook Shuts Down When Try To Wake From Sleep
I have an iBook 300 that will work perfectly fine while you use it. When you put it to sleep, it sleeps normally, but when I try to wake it the sleep light goes out, nothing shows on screen, I can hear the hard drive spinning and then it shuts down. When I turn it back on, it works normally until I try to put it to sleep. Any idea what is wrong and how I could fix it? Thanks
iBook Clamshell 300 Mac OS X (10.4.8)When you put it to sleep, it sleeps normally...
Is this by closing the lid? How about when you choose 'Sleep' from the menu and then close the lid? How about when just choosing 'Sleep' from the menu and waking it by pressing any key?
If the problems occur only with the lid then it may be a glitch in the lid mechanism ...if otherwise then it may be a system error. If you're running Tiger then it may be a little difficult to source any support for your ibook as Tiger is officially not to be run on it.
Maybe you can live with it the way it is? -
Dynamic filter in Design studio using drop-down when data source is Universe
Hi community,
Is there anyway to create Cascading filter in Design studio when data source is Universe using drop-down component (Dimension filters cannot be used in my requirement).
My requirement is,
I have 2 drop-downs:
drop-down 1 : shows the regions in a country.
drop-down 2 : should display states based the region selected in the first drop-down (drop-down 1). Also drop-down 2 should pass selected state as input to the data-source
Thanks in advance
Vivek VJHi Vivek,
Please check out this post: How to Create Multiple Dropdown boxes (Cascading Filters) when using Universe in the backend.
Regards,
Mustafa. -
How to make TreeByNestingTableColumn when data is coming by RFC
Hi ,
I have a requirement in my project that i need to populate the TreeByNestingTable from the data that is coming from backend( importing Adaptive RFCs).
Also, on selection of a row having a node , i need to open some view & on selection of row having leaf, i need to open some other view.
Can anyone guide me, so as how to do this...?
thanks,
ankurHi valery,
Thanks a lot for your instant reply on SDN.
But i didn't get what you explained me as I am new to WebDynpro Java
If you could explain me this in step by step process & coding involved.
i have created a new value node in component controller to bind it with table & initially having RFCNAME_Input in component controller.I have added attributes required for treetable to this new value node & also placed a recursive node in it.
Then, i have placed elements of RFCNAME_Input->Output->Lt_org_unit node to an arraylist.
After this i am not able to proceed.
I would be very greatful to you if you can spare some time & help me.
Thanks & Regards,
Ankur
<b>
code i wrote for populating arraylist.:</b>
IWDNode tnode = wdContext.nodeTest_Org_Unit_Input().nodeOutput().nodeLt_Org_Unit();
int size = tnode.size();
final Collection modelObjects = new ArrayList(size);
for(int i = 0;i<size;i++)
final IWDNodeElement tele = tnode.getElementAt(i);
final Object model = tele.model();
modelObjects.add(model); -
AWM - drill down the data, possible ?
hi guys,
i successfully deployed my data warehouse (dw) with owb10g. now, i want to check my dw for example by use a simple drill down function or something similiar. but how could i easily check my dw ??
i used the export-bridge in the owb client and opened the target schema in my analytic workspace manager (v10.2.0.2.0). but i only see the structure (metadata design) of the dw. i do not see the data (records) inside the dw and no drill down function with the data...
can anybody help me ? please give me a hint! thx!
greetings
s8472i did a little bit try and error and it seems indeed that if name my dimension "DIM_TIME" oracle deploy a olap dimension of the type "time" and not normal.
(you can check the type at the oracle enterprise manager (OEM) at "Administration" - "OLAP Dimension" - "[Your Dimension]" - View type in tab "General".)
and if the dimension is type "time" it gives the error message in AWM viewing the dimension data. i think the prob is that defined layers and hierarchies in the dimension as i did create other normal dimension.
do anybody know something about rules how to name the dimensions or how to create a time dimension (maybe no layers allowes?) ?
greetings
s8472 -
Unable to drill down Master data object
I am trying to drill down 0PRODUCT master data but it is giving the dump " The ASSERT condition was violated."
I am able to manage the master data but not able to drill down in order to load data.
Please help.
Edited by: Tarun Pareek on Aug 27, 2008 10:37 AM
Edited by: Tarun Pareek on Aug 27, 2008 10:37 AMHi,
Check if OSS 998730 can help.
Hope it shall help !
Regards,
Rose. -
Problem occuring when extending classes coming from 2 signed JAR
Hi everyone,
I have 2 signed jar called "base_signed.jar" and "extended_signed.jar" using keytool with a testing certificate generated at runtime. All goes well because with both signed JARs I can use the URLClassLoader without any java.security.AccessControlException exception.
But the first JAR contains abstract class B, the latter JAR contains a concrete class A.
The problem occurs when I try to instantiate some class A coming from "extended_signed.jar" using Class.forName("blablaclassA").newInstance() and occurs only if this class A extends some other abstract class B contained inside "base_signed.jar" .
Pratically if the class A is casted as its common JVM ancestor of B (JInternalFrame) all goes well, otherwise if I try to cast A using its direct ancestor B, I receive the following exception:
network: Connessione a http://www.orion.lan/~antares/it/weev/wipidea/plugins/MeteoradarArpavPlugin$7.class con proxy=DIRECT
Exception in thread "AWT-EventQueue-35" java.lang.ClassCastException: it.weev.wipidea.plugins.MeteoradarArpavPlugin cannot be cast to it.weev.wipidea.base.AWipideaPlugin
at it.weev.wipidea.base.PluginLoader.loadNetworkPlugin(Unknown Source)
at it.weev.wipidea.applet.WipideaApplet.loadPlugin(Unknown Source)
at it.weev.wipidea.applet.WipideaApplet$1.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
network: Voce cache non trovata [url: http://www.orion.lan/~antares/it/weev/wipidea/base/PluginLoader.class, versione: null]
network: Connessione a http://www.orion.lan/~antares/it/weev/wipidea/base/PluginLoader.class con proxy=DIRECT
network: Voce cache non trovata [url: http://www.orion.lan/~antares/it/weev/wipidea/base/network-classpath.class, versione: null]
---The strange thing is that if I don't sign both JARs the class A is casted on B without any exception, could for security reason like hash or other? Ideally I need all JAR signed only because I plan to load classes from all over the net, but seems that URLClassLoader throws an AccessControlException when called.
Anyway just now I solve all using only the common JVM ancestor of A and B, but what could be the final solution?
Thanks, bye.Hi Sean,
The file in question has been signed which causes issues in both OSB directly and in Eclipse when we do an import into that tool first.Can you let us know what issues you faced? Any errors? If yes, please post the same here.
Regards,
Anuj
Edited by: Anuj Dwivedi on Feb 23, 2011 9:10 PM
Maybe you are looking for
-
We are currently not able to manage schedule ship date proposed by ATP when our warehouse is closed. For example , we would like that ATP doesn't propose any schedule ship date for the first of May , which is a non working day in France. The constrai
-
How to create a simple web.xml for using servlets
Hello i wanna configure the web.xml that i can use sevlets and beans, but how can i do that? This is de directorie i have installed my webapp C:\Tomcat 4.1\webapps\testapp C:\Tomcat 4.1\webapps\test\WEB-INF\classes (in this dir, I wanna put my beans
-
Odd problem with iPhoto always seeing my iPhone as connected when not
I have started having a problem with iPhoto8. When it starts it always goes to the import photos screen and has a couple dozen icons (with no image) and filenames to import from my iPhone. The problem is my iPhone is not connected. It shows up as mou
-
How can I copy the name of a file, that I selected by a click?
Hi, I have a device controled by a Excell (VBA) interface. Truogh this interface I control the motors and Diadem (for the report) and the data are save in a database. When I use the load button from the excell, the VBA application call the script fr
-
SPECS TYPE - TYPE (creative muvo tx fm) WANTING LIST (lets keep it to max 3 more would be like to much): - sleep timer2 - clock3 - an always on feature (working with ac adapter)ACCESSORIES +Wanted accessories (lets say 2 max) - Ac adapter for when yo