Driver re-import reports partial success, but package is empty
Hi... I found this article on the 2007 forum but I'm not sure it applies to me with 2012. (http://social.technet.microsoft.com/Forums/systemcenter/en-US/c9fcff89-421b-4ec3-88eb-78fb52854356/can-not-reimport-drivers-or-add-to-driver-package)
A previous employee had imported drivers and I went through and tried to clean up, first drivers i brought in worked fine. Subsequent drivers have not gone very well. I checked all the individual drivers source directory as the folder structure had all changed
but that doesn't change anything. I run through a driver import and at the end (with the distribute content checked) but it doesn't distribute the content and if you check the package folder its empty. It goes through all the motions but in the end I do get
this error message:
Windows 7 x86 HP 8470p_v1 - The SMS Provider reported an error.
When I check the drivercatalog.log, most of the errors are that the drivers have already been imported into the catalog. There are a couple that are imported just fine.
I check the SMSProv.log and get this (sorry if i copied too much in there, I bolded the errors at the end):
CExtUserContext::EnterThread : User=XX1\admin-XX Sid=0x0105000000000005150000003FAD1462780C9225828BA628BDB10000 Caching IWbemContextPtr=00000000002D9D20 in Process 0x11e4 (4580) SMS Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
Context: SMSAppName=Configuration Manager Administrator console SMS Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
Context: MachineName=XXXX.XX.XX SMS Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
Context: UserName=XX1\admin-XX SMS Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
Context: ObjectLockContext=238cbf6b-a700-405d-b1ac-5ff3e706836e SMS Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
Context: ApplicationName=Microsoft.ConfigurationManagement.exe SMS Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
Context: ApplicationVersion=5.0.7804.1000 SMS Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
Context: LocaleID=MS\0x409 SMS Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
Context: __ProviderArchitecture=32 SMS Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
Context: __RequiredArchitecture=0 (Bool) SMS Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
Context: __ClientPreferredLanguages=en-US,en SMS Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
Context: __GroupOperationId=209904 SMS Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
CExtUserContext : Set ThreadLocaleID OK to: 1033 SMS Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
CSspClassManager::PreCallAction, dbname=CM_SC1 SMS Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
ExecQueryAsync: START SELECT * FROM SMS_ObjectContainerNode WHERE ParentContainerNodeID = 0 AND ObjectTypeName = 'SMS_Driver' AND SearchFolder = 0 ORDER BY Name SMS Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
Adding Handle 51176264 to async call map SMS Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
CExtProviderClassObject::DoCreateInstanceEnumAsync (SMS_Query) SMS Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
CSspQueryForObject :: Execute... SMS Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
Execute WQL =SELECT * FROM SMS_ObjectContainerNode WHERE ParentContainerNodeID = 0 AND ObjectTypeName = 'SMS_Driver' AND SearchFolder = 0 ORDER BY Name SMS Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
Execute SQL =select all SMS_ObjectContainerNode.ContainerNodeID,SMS_ObjectContainerNode.FolderFlags,SMS_ObjectContainerNode.FolderGuid,SMS_ObjectContainerNode.IsEmpty,SMS_ObjectContainerNode.Name,SMS_ObjectContainerNode.ObjectType,SMS_ObjectContainerNode.ObjectTypeName,SMS_ObjectContainerNode.ParentContainerNodeID,SMS_ObjectContainerNode.SearchFolder,SMS_ObjectContainerNode.SourceSite
from vSMS_Folders AS SMS_ObjectContainerNode where ((SMS_ObjectContainerNode.ParentContainerNodeID = 0 AND SMS_ObjectContainerNode.ObjectTypeName = N'SMS_Driver') AND SMS_ObjectContainerNode.SearchFolder = 0) order by SMS_ObjectContainerNode.Name SMS
Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
Results returned : 0 of 1 SMS Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
Removing Handle 51176264 from async call map SMS Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
ExecQueryAsync: COMPLETE SELECT * FROM SMS_ObjectContainerNode WHERE ParentContainerNodeID = 0 AND ObjectTypeName = 'SMS_Driver' AND SearchFolder = 0 ORDER BY Name SMS Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
CExtUserContext::LeaveThread : Releasing IWbemContextPtr=2989344 SMS Provider 8/2/2013 9:54:15 AM 3296 (0x0CE0)
SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
CExtUserContext::EnterThread : User=XX1\admin-XX Sid=0x0105000000000005150000003FAD1462780C9225828BA628BDB10000 Caching IWbemContextPtr=00000000002D9D20 in Process 0x11e4 (4580) SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: SMSAppName=Configuration Manager Administrator console SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: MachineName=XX.ad.group SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: UserName=XX1\admin-XX SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: ObjectLockContext=238cbf6b-a700-405d-b1ac-5ff3e706836e SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: ApplicationName=Microsoft.ConfigurationManagement.exe SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: ApplicationVersion=5.0.7804.1000 SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: LocaleID=MS\0x409 SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: __ProviderArchitecture=32 SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: __RequiredArchitecture=0 (Bool) SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: __ClientPreferredLanguages=en-US,en SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: __GroupOperationId=209909 SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
CExtUserContext : Set ThreadLocaleID OK to: 1033 SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
CSspClassManager::PreCallAction, dbname=CM_SC1 SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
ExecQueryAsync: START SELECT * FROM SMS_ObjectContainerNode WHERE ParentContainerNodeID = 0 AND ObjectTypeName = 'SMS_Driver' AND SearchFolder = 0 ORDER BY Name SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Adding Handle 51176264 to async call map SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
CExtProviderClassObject::DoCreateInstanceEnumAsync (SMS_Query) SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
CSspQueryForObject :: Execute... SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Execute WQL =SELECT * FROM SMS_ObjectContainerNode WHERE ParentContainerNodeID = 0 AND ObjectTypeName = 'SMS_Driver' AND SearchFolder = 0 ORDER BY Name SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Execute SQL =select all SMS_ObjectContainerNode.ContainerNodeID,SMS_ObjectContainerNode.FolderFlags,SMS_ObjectContainerNode.FolderGuid,SMS_ObjectContainerNode.IsEmpty,SMS_ObjectContainerNode.Name,SMS_ObjectContainerNode.ObjectType,SMS_ObjectContainerNode.ObjectTypeName,SMS_ObjectContainerNode.ParentContainerNodeID,SMS_ObjectContainerNode.SearchFolder,SMS_ObjectContainerNode.SourceSite
from vSMS_Folders AS SMS_ObjectContainerNode where ((SMS_ObjectContainerNode.ParentContainerNodeID = 0 AND SMS_ObjectContainerNode.ObjectTypeName = N'SMS_Driver') AND SMS_ObjectContainerNode.SearchFolder = 0) order by SMS_ObjectContainerNode.Name SMS
Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Results returned : 0 of 1 SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Removing Handle 51176264 from async call map SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
ExecQueryAsync: COMPLETE SELECT * FROM SMS_ObjectContainerNode WHERE ParentContainerNodeID = 0 AND ObjectTypeName = 'SMS_Driver' AND SearchFolder = 0 ORDER BY Name SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
CExtUserContext::LeaveThread : Releasing IWbemContextPtr=2989344 SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
CExtUserContext::EnterThread : User=XX1\admin-XX Sid=0x0105000000000005150000003FAD1462780C9225828BA628BDB10000 Caching IWbemContextPtr=00000000002D9D20 in Process 0x11e4 (4580) SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: SMSAppName=Configuration Manager Administrator console SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: MachineName=XX.XX1.ad.group SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: UserName=XX1\admin-XX SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: ObjectLockContext=238cbf6b-a700-405d-b1ac-5ff3e706836e SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: ApplicationName=Microsoft.ConfigurationManagement.exe SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: ApplicationVersion=5.0.7804.1000 SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: LocaleID=MS\0x409 SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: ReturnAll=1 (Bool) SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: FolderTypeName=SMS_Driver SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: InstanceCount=1001 SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: __ProviderArchitecture=32 SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: __RequiredArchitecture=0 (Bool) SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: __ClientPreferredLanguages=en-US,en SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Context: __GroupOperationId=209914 SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
CExtUserContext : Set ThreadLocaleID OK to: 1033 SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
CSspClassManager::PreCallAction, dbname=CM_SC1 SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
ExecQueryAsync: START SELECT * FROM SMS_Driver ORDER BY LocalizedDisplayName SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Adding Handle 51176264 to async call map SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
CExtProviderClassObject::DoCreateInstanceEnumAsync (SMS_Query) SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
CSspQueryForObject :: Execute... SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Execute WQL =SELECT * FROM SMS_Driver ORDER BY LocalizedDisplayName SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Execute SQL =select all SMS_Driver.CI_ID,SMS_Driver.LocaleID,SMS_Driver.ApplicabilityCondition,SMS_Driver.CI_ID,SMS_Driver.CI_UniqueID,SMS_Driver.CIType_ID,SMS_Driver.CIVersion,SMS_Driver.ContentSourcePath,SMS_Driver.CreatedBy,SMS_Driver.DateCreated,SMS_Driver.DateLastModified,SMS_Driver.DriverBootCritical,SMS_Driver.DriverClass,SMS_Driver.DriverDate,SMS_Driver.DriverINFFile,SMS_Driver.DriverProvider,SMS_Driver.DriverSigned,SMS_Driver.DriverSigner,SMS_Driver.DriverType,SMS_Driver.DriverVersion,SMS_Driver.EffectiveDate,SMS_Driver.EULAAccepted,SMS_Driver.EULAExists,SMS_Driver.EULASignoffDate,SMS_Driver.EULASignoffUser,SMS_Driver.IsUserCI,SMS_Driver.InUse,SMS_Driver.IsBroken,SMS_Driver.IsBundle,SMS_Driver.IsChild,SMS_Driver.IsEnabled,SMS_Driver.IsExpired,SMS_Driver.IsHidden,SMS_Driver.IsLatest,SMS_Driver.IsQuarantined,SMS_Driver.IsSuperseded,SMS_Driver.IsUserDefined,SMS_Driver.IsVersionCompatible,SMS_Driver.LastModifiedBy,SMS_Driver.Description,SMS_Driver.DisplayName,SMS_Driver.CIInformativeURL,SMS_Driver.LocaleID,SMS_Driver.ModelID,SMS_Driver.ModelName,SMS_Driver.PermittedUses,SMS_Driver.PlatformType,SMS_Driver.SDMPackageVersion,SMS_Driver.SedoObjectVersion,SMS_Driver.SourceSite
from fn_ListDriverCIs_List(1033) AS SMS_Driver where SMS_Driver.ModelName not in (select all Folder##Alias##810314.InstanceKey from vFolderMembers AS Folder##Alias##810314 where Folder##Alias##810314.ObjectTypeName = N'SMS_Driver')
order by SMS_Driver.DisplayName SMS Provider 8/2/2013 9:54:16 AM 3296 (0x0CE0)
Results returned : 1001 of 1002 SMS Provider 8/2/2013 9:54:21 AM 3296 (0x0CE0)
Removing Handle 51176264 from async call map SMS Provider 8/2/2013 9:54:21 AM 3296 (0x0CE0)
ExecQueryAsync: COMPLETE SELECT * FROM SMS_Driver ORDER BY LocalizedDisplayName SMS Provider 8/2/2013 9:54:21 AM 3296 (0x0CE0)
CExtUserContext::LeaveThread : Releasing IWbemContextPtr=2989344 SMS Provider 8/2/2013 9:54:21 AM 3296 (0x0CE0)
SMS Provider 8/2/2013 9:54:22 AM 3296 (0x0CE0)
CExtUserContext::EnterThread : User=XX1\admin-XX Sid=0x0105000000000005150000003FAD1462780C9225828BA628BDB10000 Caching IWbemContextPtr=00000000002D9D20 in Process 0x11e4 (4580) SMS Provider 8/2/2013 9:54:22 AM 3296 (0x0CE0)
Context: SMSAppName=Configuration Manager Administrator console SMS Provider 8/2/2013 9:54:22 AM 3296 (0x0CE0)
Context: MachineName=XX.XX.ad.group SMS Provider 8/2/2013 9:54:22 AM 3296 (0x0CE0)
Context: UserName=XX1\admin-XX SMS Provider 8/2/2013 9:54:22 AM 3296 (0x0CE0)
Context: ObjectLockContext=238cbf6b-a700-405d-b1ac-5ff3e706836e SMS Provider 8/2/2013 9:54:22 AM 3296 (0x0CE0)
Context: ApplicationName=Microsoft.ConfigurationManagement.exe SMS Provider 8/2/2013 9:54:22 AM 3296 (0x0CE0)
Context: ApplicationVersion=5.0.7804.1000 SMS Provider 8/2/2013 9:54:22 AM 3296 (0x0CE0)
Context: LocaleID=MS\0x409 SMS Provider 8/2/2013 9:54:22 AM 3296 (0x0CE0)
Context: __ProviderArchitecture=32 SMS Provider 8/2/2013 9:54:22 AM 3296 (0x0CE0)
Context: __RequiredArchitecture=0 (Bool) SMS Provider 8/2/2013 9:54:22 AM 3296 (0x0CE0)
Context: __ClientPreferredLanguages=en-US,en SMS Provider 8/2/2013 9:54:22 AM 3296 (0x0CE0)
Context: __GroupOperationId=209918 SMS Provider 8/2/2013 9:54:22 AM 3296 (0x0CE0)
CExtUserContext : Set ThreadLocaleID OK to: 1033 SMS Provider 8/2/2013 9:54:22 AM 3296 (0x0CE0)
CSspClassManager::PreCallAction, dbname=CM_SC1 SMS Provider 8/2/2013 9:54:22 AM 3296 (0x0CE0)
User Context: XX1\admin-XX SMS Provider 8/2/2013 9:54:22 AM 3296 (0x0CE0)
GetObjectAsync : SMS_Driver.CI_ID=16837168 SMS Provider 8/2/2013 9:54:22 AM 3296 (0x0CE0)
Requested class =SMS_Driver SMS Provider 8/2/2013 9:54:22 AM 3296 (0x0CE0)
Requested num keys=1 SMS Provider 8/2/2013 9:54:22 AM 3296 (0x0CE0)
Error setting property (InUse) 0x80041002! SMS Provider 8/2/2013 9:54:22 AM 3296 (0x0CE0)
Error setting property (IsBroken) 0x80041002! SMS Provider 8/2/2013 9:54:22 AM 3296 (0x0CE0)
Error setting property (IsChild) 0x80041002! SMS Provider 8/2/2013 9:54:22 AM 3296 (0x0CE0)
CExtUserContext::LeaveThread : Releasing IWbemContextPtr=2989344 SMS Provider 8/2/2013 9:54:22 AM 3296 (0x0CE0)
Thanks Torsten.
my SMSProv.log after the driver import.
CExtUserContext::EnterThread : User=***************\*************** Sid=0x010500000000000515000000F60E3C019144115B69055777F51A0000 Caching IWbemContextPtr=000000C146B638F0 in Process 0xabc (2748)
SMS Provider 1.10.2014 18:31:31
2776 (0x0AD8)
Context: SMSAppName=Configuration Manager Administrator console
SMS Provider 1.10.2014 18:31:31
2776 (0x0AD8)
Context: MachineName=***************.***************
SMS Provider 1.10.2014 18:31:31
2776 (0x0AD8)
Context: UserName=***************\***************
SMS Provider 1.10.2014 18:31:31
2776 (0x0AD8)
Context: ObjectLockContext=425f08f9-35ae-40ed-9197-fda7f1d53bb0
SMS Provider 1.10.2014 18:31:31
2776 (0x0AD8)
Context: ApplicationName=Microsoft.ConfigurationManagement.exe
SMS Provider 1.10.2014 18:31:31
2776 (0x0AD8)
Context: ApplicationVersion=5.0.7958.1000 SMS Provider
1.10.2014 18:31:31 2776 (0x0AD8)
Context: LocaleID=MS\0x409 SMS Provider
1.10.2014 18:31:31 2776 (0x0AD8)
Context: ReturnAll=1 (Bool) SMS Provider
1.10.2014 18:31:31 2776 (0x0AD8)
Context: InstanceCount=1001 SMS Provider
1.10.2014 18:31:31 2776 (0x0AD8)
Context: __ProviderArchitecture=32 SMS Provider
1.10.2014 18:31:31 2776 (0x0AD8)
Context: __RequiredArchitecture=0 (Bool) SMS Provider
1.10.2014 18:31:31 2776 (0x0AD8)
Context: __ClientPreferredLanguages=en-US,en
SMS Provider 1.10.2014 18:31:31
2776 (0x0AD8)
Context: __CorrelationId={9F591278-DCA1-0000-EAB7-5E9FA1DCCF01}
SMS Provider 1.10.2014 18:31:31
2776 (0x0AD8)
Context: __GroupOperationId=841795 SMS Provider
1.10.2014 18:31:31 2776 (0x0AD8)
CExtUserContext : Set ThreadLocaleID OK to: 1033
SMS Provider 1.10.2014 18:31:31
2776 (0x0AD8)
CSspClassManager::PreCallAction, dbname=CM_PS1
SMS Provider 1.10.2014 18:31:31
2776 (0x0AD8)
ExecQueryAsync: START SELECT * FROM SMS_Driver WHERE CI_ID IN (SELECT CTC.CI_ID FROM SMS_CIToContent AS CTC JOIN SMS_PackageToContent AS PTC ON CTC.ContentID = PTC.ContentID JOIN SMS_DriverPackage AS Pkg ON PTC.PackageID = Pkg.PackageID WHERE Pkg.PackageID='PS10003C')
ORDER BY LocalizedDisplayName SMS Provider
1.10.2014 18:31:31 2776 (0x0AD8)
Adding Handle 1175773664 to async call map SMS Provider
1.10.2014 18:31:31 2776 (0x0AD8)
CExtProviderClassObject::DoCreateInstanceEnumAsync (SMS_Query)
SMS Provider 1.10.2014 18:31:31
2776 (0x0AD8)
CSspQueryForObject :: Execute... SMS Provider
1.10.2014 18:31:31 2776 (0x0AD8)
Execute WQL =SELECT * FROM SMS_Driver WHERE CI_ID IN (SELECT CTC.CI_ID FROM SMS_CIToContent AS CTC JOIN SMS_PackageToContent AS PTC ON CTC.ContentID = PTC.ContentID JOIN SMS_DriverPackage AS Pkg ON PTC.PackageID = Pkg.PackageID WHERE Pkg.PackageID='PS10003C')
ORDER BY LocalizedDisplayName SMS Provider
1.10.2014 18:31:31 2776 (0x0AD8)
Execute SQL =select all SMS_Driver.CI_ID,SMS_Driver.LocaleID,SMS_Driver.ApplicabilityCondition,SMS_Driver.CI_ID,SMS_Driver.CI_UniqueID,SMS_Driver.CIType_ID,SMS_Driver.CIVersion,SMS_Driver.ContentSourcePath,SMS_Driver.CreatedBy,SMS_Driver.DateCreated,SMS_Driver.DateLastModified,SMS_Driver.DriverBootCritical,SMS_Driver.DriverClass,SMS_Driver.DriverDate,SMS_Driver.DriverINFFile,SMS_Driver.DriverProvider,SMS_Driver.DriverSigned,SMS_Driver.DriverSigner,SMS_Driver.DriverType,SMS_Driver.DriverVersion,SMS_Driver.EffectiveDate,SMS_Driver.EULAAccepted,SMS_Driver.EULAExists,SMS_Driver.EULASignoffDate,SMS_Driver.EULASignoffUser,SMS_Driver.IsUserCI,SMS_Driver.InUse,SMS_Driver.IsBroken,SMS_Driver.IsBundle,SMS_Driver.IsChild,SMS_Driver.IsEnabled,SMS_Driver.IsExpired,SMS_Driver.IsHidden,SMS_Driver.IsLatest,SMS_Driver.IsQuarantined,SMS_Driver.IsSuperseded,SMS_Driver.IsUserDefined,SMS_Driver.IsVersionCompatible,SMS_Driver.LastModifiedBy,SMS_Driver.Description,SMS_Driver.DisplayName,SMS_Driver.CIInformativeURL,SMS_Driver.LocaleID,SMS_Driver.ModelID,SMS_Driver.ModelName,SMS_Driver.PermittedUses,SMS_Driver.PlatformType,SMS_Driver.SDMPackageVersion,SMS_Driver.SedoObjectVersion,SMS_Driver.SourceSite
from fn_ListDriverCIs_List(1033) AS SMS_Driver where SMS_Driver.CI_ID in (select all CTC.CI_ID from vSMS_CIToContent AS CTC INNER JOIN vCI_ContentPackages AS PTC ON CTC.ContentID = PTC.Content_ID INNER JOIN vSMS_DriverPackage_List AS Pkg
ON PTC.PkgID = Pkg.PkgID where Pkg.PkgID = N'PS10003C') order by SMS_Driver.DisplayName
SMS Provider 1.10.2014 18:31:31
2776 (0x0AD8)
Results returned : 232 of 233 SMS Provider
1.10.2014 18:31:33 2776 (0x0AD8)
Removing Handle 1175773664 from async call map
SMS Provider 1.10.2014 18:31:33
2776 (0x0AD8)
ExecQueryAsync: COMPLETE SELECT * FROM SMS_Driver WHERE CI_ID IN (SELECT CTC.CI_ID FROM SMS_CIToContent AS CTC JOIN SMS_PackageToContent AS PTC ON CTC.ContentID = PTC.ContentID JOIN SMS_DriverPackage AS Pkg ON PTC.PackageID = Pkg.PackageID WHERE Pkg.PackageID='PS10003C')
ORDER BY LocalizedDisplayName SMS Provider
1.10.2014 18:31:33 2776 (0x0AD8)
CExtUserContext::LeaveThread : Releasing IWbemContextPtr=1186347248
SMS Provider 1.10.2014 18:31:33
2776 (0x0AD8)
SMS Provider 1.10.2014 18:31:33
2776 (0x0AD8)
CExtUserContext::EnterThread : User=***************\*************** Sid=0x010500000000000515000000F60E3C019144115B69055777F51A0000 Caching IWbemContextPtr=000000C146B63B90 in Process 0xabc (2748)
SMS Provider 1.10.2014 18:31:33
2776 (0x0AD8)
Context: SMSAppName=Configuration Manager Administrator console
SMS Provider 1.10.2014 18:31:33
2776 (0x0AD8)
Context: MachineName=***************.***************.***************
SMS Provider 1.10.2014 18:31:33
2776 (0x0AD8)
Context: UserName=***************\***************
SMS Provider 1.10.2014 18:31:33
2776 (0x0AD8)
Context: ObjectLockContext=425f08f9-35ae-40ed-9197-fda7f1d53bb0
SMS Provider 1.10.2014 18:31:33
2776 (0x0AD8)
Context: ApplicationName=Microsoft.ConfigurationManagement.exe
SMS Provider 1.10.2014 18:31:33
2776 (0x0AD8)
Context: ApplicationVersion=5.0.7958.1000 SMS Provider
1.10.2014 18:31:33 2776 (0x0AD8)
Context: LocaleID=MS\0x409 SMS Provider
1.10.2014 18:31:33 2776 (0x0AD8)
Context: __ProviderArchitecture=32 SMS Provider
1.10.2014 18:31:33 2776 (0x0AD8)
Context: __RequiredArchitecture=0 (Bool) SMS Provider
1.10.2014 18:31:33 2776 (0x0AD8)
Context: __ClientPreferredLanguages=en-US,en
SMS Provider 1.10.2014 18:31:33
2776 (0x0AD8)
Context: __CorrelationId={9F591278-DCA1-0000-EAB7-5E9FA1DCCF01}
SMS Provider 1.10.2014 18:31:33
2776 (0x0AD8)
Context: __GroupOperationId=841817 SMS Provider
1.10.2014 18:31:33 2776 (0x0AD8)
CExtUserContext : Set ThreadLocaleID OK to: 1033
SMS Provider 1.10.2014 18:31:33
2776 (0x0AD8)
CSspClassManager::PreCallAction, dbname=CM_PS1
SMS Provider 1.10.2014 18:31:33
2776 (0x0AD8)
User Context: ***************\***************
SMS Provider 1.10.2014 18:31:33
2776 (0x0AD8)
GetObjectAsync : SMS_Driver.CI_ID=16795546 SMS Provider
1.10.2014 18:31:33 2776 (0x0AD8)
Requested class =SMS_Driver SMS Provider
1.10.2014 18:31:33 2776 (0x0AD8)
Requested num keys=1 SMS Provider
1.10.2014 18:31:33 2776 (0x0AD8)
Error setting property (InUse) 0x80041002! SMS Provider
1.10.2014 18:31:33 2776 (0x0AD8)
Error setting property (IsBroken) 0x80041002!
SMS Provider 1.10.2014 18:31:33
2776 (0x0AD8)
Error setting property (IsChild) 0x80041002!
SMS Provider 1.10.2014 18:31:33
2776 (0x0AD8)
CExtUserContext::LeaveThread : Releasing IWbemContextPtr=1186347920
SMS Provider 1.10.2014 18:31:33
2776 (0x0AD8)
Similar Messages
-
Advertisment Report says successful but program did not install...help?
I created the package and package works outside of sccm. Here is the execmgr.log info which says the program installs successfully but the progam is not on the machine. It is in the cache but does not seem to install... what's happening?
Policy is updated for Program: Lego Mindstorms, Package: NP1003A8, Advert: NP120365 execmgr 1/28/2010 3:51:35 PM 2820 (0x0B04)
Policy is updated for Program: Lego Mindstorms, Package: NP1003A8, Advert: NP120365 execmgr 1/28/2010 4:01:18 PM 3900 (0x0F3C)
Mandatory execution requested for program Lego Mindstorms and advertisement NP120365 execmgr 1/28/2010 4:04:34 PM 3848 (0x0F08)
Creating mandatory request for advert NP120365, program Lego Mindstorms, package NP1003A8 execmgr 1/28/2010 4:04:34 PM 3848 (0x0F08)
Requesting content from CAS for package NP1003A8 version 2 execmgr 1/28/2010 4:04:34 PM 3848 (0x0F08)
Successfully created a content request handle {68625778-FDE1-4EEF-BA7A-4276FCDFFB7D} for the package NP1003A8 version 2 execmgr 1/28/2010 4:04:34 PM 3848 (0x0F08)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistWaitingContentEvent
AdvertisementId = "NP120365";
ClientID = "GUID:1340803F-10E6-4EF4-8CDA-5CB17EB24979";
DateTime = "20100128210435.308000+000";
MachineName = "PD-224-10";
PackageName = "NP1003A8";
PackageVersion = "2";
ProcessID = 1996;
ProgramName = "Lego Mindstorms";
SiteCode = "NP1";
ThreadID = 3848;
execmgr 1/28/2010 4:04:35 PM 3848 (0x0F08)
Successfully raised SoftDistWaitingContentEvent event for program Lego Mindstorms execmgr 1/28/2010 4:04:35 PM 3848 (0x0F08)
Execution Request for package NP1003A8 program Lego Mindstorms state change from NotExist to WaitingContent execmgr 1/28/2010 4:04:35 PM 3848 (0x0F08)
Content is available for program Lego Mindstorms. execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
CExecutionRequest::Overriding Service Windows as per policy. execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
Execution Manager timer has been fired. execmgr 1/28/2010 5:06:49 PM 820 (0x0334)
Executing program LegoMindstorms.exe in Admin context execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
Execution Request for package NP1003A8 program Lego Mindstorms state change from WaitingContent to NotifyExecution execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
Checking content location C:\WINDOWS\system32\CCM\Cache\NP1003A8.2.System for use execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
Successfully selected content location C:\WINDOWS\system32\CCM\Cache\NP1003A8.2.System execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
GetFileVersionInfoSize failed for file C:\WINDOWS\system32\CCM\Cache\NP1003A8.2.System\LegoMindstorms.exe, error 1812 execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
Executing program as a script execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
Successfully prepared command line "C:\WINDOWS\system32\CCM\Cache\NP1003A8.2.System\LegoMindstorms.exe" execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
Command line = "C:\WINDOWS\system32\CCM\Cache\NP1003A8.2.System\LegoMindstorms.exe", Working Directory = C:\WINDOWS\system32\CCM\Cache\NP1003A8.2.System\ execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
Created Process for the passed command line execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramStartedEvent
AdvertisementId = "NP120365";
ClientID = "GUID:1340803F-10E6-4EF4-8CDA-5CB17EB24979";
CommandLine = "\"C:\\WINDOWS\\system32\\CCM\\Cache\\NP1003A8.2.System\\LegoMindstorms.exe\"";
DateTime = "20100128220649.886000+000";
MachineName = "PD-224-10";
PackageName = "NP1003A8";
ProcessID = 1996;
ProgramName = "Lego Mindstorms";
SiteCode = "NP1";
ThreadID = 3212;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "C:\\WINDOWS\\system32\\CCM\\Cache\\NP1003A8.2.System\\";
execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
Raised Program Started Event for Ad:NP120365, Package:NP1003A8, Program: Lego Mindstorms execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
Program exit code 0 execmgr 1/28/2010 5:07:10 PM 3212 (0x0C8C)
Looking for MIF file to get program status execmgr 1/28/2010 5:07:10 PM 3212 (0x0C8C)
Script for Package:NP1003A8, Program: Lego Mindstorms succeeded with exit code 0 execmgr 1/28/2010 5:07:10 PM 3212 (0x0C8C)
I am having exact same issues on Lego Mindstorm 2.0 - usig sccm 2012R2
Fatal Error. Required MSI directory property PersonalFolder is in an invalid location. "C:\doucments and
setting\local service]My doucments" which does not exist the target machines
what was the resolution for this?
I would really appreciate any help regarding this.
Have you looked at creating an MST yet? that would be my first step. My second step is to call Lego and get their support to tell you how to deploy their application to an enterprise environment.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
Was updating Flash drive says it was successful but will not work on daily games
was updating flash drive & it said it was successful, but willnot work
To help troubleshoot we'll need the following system information:
Operating system
Browser
Flash Player version
When reporting issues with video or audio, it's also helpful to get your system hardware and driver details. Instructions for finding this information can be found here:
Windows
Mac
Finally, sometimes video and audio problems are caused at a lower level and not directly related to Flash Player. I recommend trying both of the links below to see how they perform. If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing. You can verify the user of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
HTML5 video
Non-HTML5 video -
Using External CD Rom drive to import music from CD to Itune
I have itunes 6.0 on an XP laptop, and an external TDK DVD/CDrom drive. Itunes imports music from CDs when I use the drive on the laptop, however, only imports links (seem like URL links) when I use the external drive to import music from a CD into a playlist.
I am trying to use the external CD rom drive for importing music into Itunes, but there seems to be a problem, or I have not checked some box or the other. Can someone help??
ThanksFirst, Jaguar does not come on a DVD. The standard Jaguar release comes on two CDs. What you probably have is a gray color OEM DVD or a copy that was made for a specific Mac model and will not work with your computer. Furthermore, in order to run OS X on your computer you must first install a firmware update.
You also need at least 128 MBs of RAM for OS X and at least 3 GBs of free space on the hard drive during installation. Your particular model requires that OS X be installed on a drive or partition that is less than 8 GBs. If your hard drive is larger than 8 GBs it must be partitioned such that the first partition is no larger than 7.85 GBs and OS X must be installed in that partition. The drive must also be formatted Mac OS Extended (HFS+).
Furthermore, you cannot boot OS X from a USB drive, only from a Firewire drive.
You will need to get the correct Jaguar installers. You can purchase the right package at www.applerescue.com. Your particular model is compatible with Panther thru 10.3.9. Panther would be a better choice than Jaguar because it is much faster even on your iMac. However, OS X will not be very fast on your computer because it lacks CPU speed and video horsepower. If you continue to install OS X, then you should plan to install the maximum of 512 MBs of RAM that iMac supports. -
Front end application error after import script run successfully in R12
Hi ,
i got an exception in R12 environment.
i developed one simple OAF page and deployed in apps import script run successfully.
but when i am opening that page in Front end it will give an exception.
That is
Exception Details.
oracle.apps.fnd.framework.OAException: Could not load application module 'tflsm.oracle.apps.po.per.server.TflsmAM'.
## Detail 0 ##
JBO-30003: The application pool (cph-oadb-tst22.dk.flsmidth.netTST221543tflsm.oracle.apps.po.per.server.TflsmAM) failed to checkout an application module due to the following exception:
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg=JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2002)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:453)
## Detail 0 ##
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg=JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:545)
at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2094)
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1961)
## Detail 0 ##
oracle.jbo.NoDefException: JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:441)
JBO-30003: The application pool (cph-oadb-tst22.dk.flsmidth.netTST221543tflsm.oracle.apps.po.per.server.TflsmAM) failed to checkout an application module due to the following exception:
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg=JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2002)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
## Detail 0 ##
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg=JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:545)
## Detail 0 ##
oracle.jbo.NoDefException: JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:441)
i will check all the class files and xml files of Application Module below top, all are there in the server top(below top)
/u02/TST22/apps/apps_st/comn/java/classes/xxfls
but i got the exception.
is there any different structure in R12.
i.ein the server top /u02/TST22/apps/apps_st/comn/java/classes/xxfls (Here my all class files in Binary mode and xml files in ASCII mode)
only CLASS files are needed or XML files are also need.(i am moving all CLASS and XML files)
could you please help me on this.
Thanks with Regards,
MuthuMuthu,
This issue usually occurs when the AM.class file is not available at the given location. Try to find out on the server whether this
tflsm.oracle.apps.po.per.server.TflsmAM exists.
If still the problem persists then go for redeployement by deleting the existing one.
Regards,
Gyan -
Cisco Prime 2.2 Config Archive get Partial-Success
Good morning everyone!
I have a question regarding Cisco Prime Infrastructure 2.2 and Config Archive. Im trying to backup a configuration for an old WS-CBS3020-HPQ blade with IOS version 12.2(58)SE1 and im getting an error under "Fetch vlan" that says :
Couldn't able to collect VLAN on the device. TFTP server not accessible from device.
Im not sure what this means? It gets partial-success, but the error message worries me. Im not able to find anything in the logs or by searching for the error code. Anyone have any idea where to look? The credential is correct, i tripple checked :)I tried using the "tftp-server flash:" command, but didnt help. Im also seeing this problem with a couple of Cisco 3750x switches.
-
When trying to import music files I get an error message Thea says "importer reported a generic error". Also when editing video, screen views look great but when I transfer to PC or flash drive video quality is very poor. Any suggestions?
chansen232
Premiere Elements 13 on Windows 7 (presumed 64 bit).....
1. Music files and error message...are these music files from iTunes? If so, convert them to .wav in iTunes to convert them to wav version, and then import the .wav version into Premiere Elements 13 project using Premiere Elements 13 Expert workspace's Add Media/Files and Folders/Project Assets from where you drag the wav version to the Soundtrack.
The following are the instructions for the iTunes converting
http://support.apple.com/en-us/HT1550
If any problems with the instructions, please let me know, and I will go through them with you.
2. How you set up the project and the export settings that you select greatly influence your end product result.
a. What are the properties of the source media?
b. What project preset did you (manually) or the project (automatically) set to match the properties of the source media.
(If you do not know, please tell us what you see for the readings of Editing Mode, Timebase, Frame Size, Pixel Aspect Ratio - even
if the fields look grayed out.)
c. For your export...Publish+Share/Computer/and then what? And what preset? Did you use the default settings of the preset or did you
customize the export settings of the preset under the preset's Advanced Button/Video Tab and Audio Tab?
Let us start here and then decide what next.
Thanks.
ATR -
Organizer will not open after I tried backing up photos on an external hard drive on Mac. Editor opens, but will not launch Organizer. Have tried clearing the catalogs, but nothing works. This was first reported 10 days ago. Had to be out of the country for a week - without photoshop working-- and now I'm back with the same problem. Can someone please help, or do I dump this and try to get some help just reloading the program?
jnrmendonca
It had 4 years of photos and videos on it.
To what did your camera record those photos and videos - camera's internal memory, inserted memory card, other?
Any remote chance that the latter may still exist for you to use to download the camera files to your new external hard drive?
ATR -
Imported 65 songs on ipod successful but they are on their but dimmed won't play says to see itunes?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Imported analog video successfully and it is normal in the "Event" pane but when I move a clip into the "Project" pane, it enlarges it slightly and distorts it. How can I keep that from happening?
Hi
Turn off analyze/image stabilization.
Yours Bengt W -
i installed win 7 on my mac book, and the sound driver was installed successfully, but i don't hear any sound, please help
Is the volume muted? Click on the volume icon in the system tray to see if it shows as muted. If that's the case, I know of a workaround to fix this because if you unmute the speakers now, the condition will come back when you reboot your computer. I don't know the exact steps off the top of my head at the moment as I'm not in front of my machine. Check this first and reply if muting was the problem and I will detail the steps needed to fix the problem.
-
Use adt to package an air installer success, but install this air file "sorry , an error has occured
hi everyone, i am using a bat file to package an air file ,
this application runs on windows 7 32 bit,
it need to call another windows application , so i google and then find i need to add -target native when package , so i added.
the bat file is like below:
========================================
@echo off
:: AIR application packaging
:: More information:
:: http://livedocs.adobe.com/flex/3/html/help.html?content=CommandLineTools_5.html#1035959
:: Path to Flex SDK binaries
set PATH=%PATH%;C:\AdobeAIRSDK\bin
:: Signature (see 'CreateCertificate.bat')
set CERTIFICATE=yeahCert.pfx
set SIGNING_OPTIONS=-storetype pkcs12 -keystore %CERTIFICATE% -tsa none
if not exist %CERTIFICATE% goto certificate
:: Output
if not exist air md air
set AIR_FILE=air/jonnson.air
:: Input
set APP_XML=application.xml
set FILE_OR_DIR=-C bin .
echo Signing AIR setup using certificate %CERTIFICATE%.
call adt -package %SIGNING_OPTIONS% -target native %AIR_FILE% %APP_XML% %FILE_OR_DIR%
if errorlevel 1 goto failed
echo.
echo AIR setup created: %AIR_FILE%
echo.
goto end
:certificate
echo Certificate not found: %CERTIFICATE%
echo.
echo Troubleshotting:
echo A certificate is required, generate one using 'CreateCertificate.bat'
echo.
goto end
:failed
echo AIR setup creation FAILED.
echo.
echo Troubleshotting:
echo did you configure the Flex SDK path in this Batch file?
echo.
:end
pause
======================================================
after run this bat , the air file is successfully built , but when i want to install this air , it says "sorry ,an error has occured ..... bla bla installer file is damaged....bla bla "
but when i remove the red part -target native in the command above then run it again , the new packaged air file can install successfully, but the application can not call other windows apllication anymore, nativeprocess.issupported always returns false when running
so seems like the problem is all about -target native , deos anyone know whats wrong ?
this problem really bothers me long time , any help will be appreciated. thanks in advance!Nice! I swear I tried that URL (substituting "mac" for "win" and "MAC" for "WIN" in the one relaxatraja posted), but I guess I missed something.
Ironically, it doesn't include a binary either, but a simple alias works:
alias pfi='java -jar /path/to/PFI/lib/pfi.jar'
And it did indeed produce an ipa without error. I don't have my hardware with me, but I'll be able to test it tonight. Meanwhile, I think I'm in business. Thank you all! -
Safari tries repeatedly to open a page. The page partially opens but then Safari reports that there's something wrong with page and I get an error message. This is happening at too many web sites for one site to be having issues.
I have a similar problem, Safari cannot load a complet page. It stalls e.g. ["38 of 42"]. sometimes it will complete loading after a long wait. just as often it will never complete the page,
The same thing happens in chrome and firefox but safari on my iPad works just fine.
I have the latest version of everything
I assume there is a system problem but cleaning up permissions does not help -
I've redownloaded several songs via reporting a problem to itunes. Still several of the songs remain partial audio but appear to be fully downloaded. Itunes doesn't allow me to report a problem again... What can I do?
On the new laptop, launch iTunes. From the menu bar click Store / Authorize This Computer.
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer -
Large scheduled DeskI reports are corrupt, but reported as successful
Hi, everyone.
One of our customers have recently upgraded from R2 to XI 3.1 SP2 + FP 2.9.
It is a standalone system (not clustered) running on Windows Server 2008 64-bit.
All BO server settings are default settings.
The problem was found when testing reports after migration.
After migrating, they have problems with some of their large reports.
These reports contain several prompts, and will take more than 3 hours to complete if the selection criterions are not limited significantly by using the prompts.
This was not a problem in R2.
The problem is as follows:
If one schedules the report and limits the data to retrieve, say, one month of data only, the reports schedules just fine and the instance can be opened without problems.
But, if one increases the time period to a year, retrieving a lot of data, we run into problems.
The history of the report will tell us that the report has run successfully, but when we open the instance in InfoView the report will immediately fail with an error message which just says Error: INF.
Nothing more.
I then tested by finding where the physical files for the instances were located in the Output File Repository using Query Builder.
The small instances can be opened directly using DeskI full client.
When opening the reports which gave me Error: INF in InfoView, I get "Unknown Error. FRM0007." in DeskI. This indicates that the u201Cbigu201D reports are corrupt.
Also, if we schedule to PDF, the PDF generated only contains "placeholders" for the data.
See this link for screenshot from a part of such a PDF. [PDF with errors|http://i1141.photobucket.com/albums/n597/AffectoASM/datalabels.png]
So the problem is: The scheduled reports runs for more than 3 hours and are reported as being successful. However, the report instance generated is corrupt.
Do anyone here know what might be the cause of this?
Thanks!
Edited by: Jan Terje Hansen on Aug 12, 2011 12:41 PM TyposAppreciate the response, although I do not understand the SMB reference as I thought iSCSI was a direct block transfer. Indeed the memory load does increase during the period of the network activity. So caching applies to iSCSI
direct block access as well as SMB? Apologies for my ignorance.
iSCSI is cached on client side just like any physical disk (marked removable or not). So files you copy go to Cache and Memory Manager cache before traveling down storage stack pushed by Lazy Writer. So you see what you see: smaller amount of writes (<RAM
size) go immediately to memory and then storage stack, TCP, iSCSI and network actually kick in.
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.
Maybe you are looking for
-
Hi All, The client wanted a separate report only for Outgoing Payment --> Bank transfer, for which we had written SQL Code The report is showing Cash & Check transactions also, where as i require only Bank Transfer. Below is the code written. select
-
Publish Handouts in Word 2007 not working
Our office recently upgraded to Word 2007 and now I am unable to publish Word handouts in Captivate. I have tried both Captivate 2 and 3, and neither work. I get the following message: An error was encountered while publishing to Word. Please check a
-
I don't know if this is the appropriate forum, but I have a problem. I recently inadvertently block a e-mail sender. How can I unblock the sender? This question was solved. View Solution.
-
DB version : 10.2.0.4 Below is a query which will get all tables in ALL schemas which has both YEAR_N and MONTH_N columns and generate the delete statements. SELECT 'delete from '||owner||'.'||table_name||' where (year_n=2008 and month_n<4) or (year_
-
Print Date located in Special Fields In Field Explorer
Post Author: sher CA Forum: General The "print date" on my report displays the first date I ran the report which was 6/11/07. This date should display the system date/current date. Do you know why this is happening in my report?