Drivers for I/O Tech Daqbook 200?

I'm trying an eval. copy of LabView, and want to test it on my DaqBook200. What do I have to do to get drivers for the hardware?
Will the eval. copy do frequency spectrum FFTs?

Hello,
Since the DAQ device that you are using is not a National Instruments product, you will have to contact I/O Tech and request the drivers and the LabVIEW support files so that you can call the board directly from LabVIEW.
Regarding the FFTs, you should not have any problems programming your application using analysis VI's, even though the LabVIEW software that you are using is an evaluation version.
Good luck with your application!

Similar Messages

Labview Drivers for an Integral Tech Framegrabber

My company is interested in purchasing a video inspection system that
uses the following frame grabber:
http://www.integraltech.com/art/downloaded%20from%20current%20site/fbmv/documents/fbmvlitespecsheet.pdf
Integral Tech does not make Labview drivers for this card.
Would there be a way to get these written, or would that be cost
prohibitive ?
Thanks for any suggestions.
Rick B.
Email: Use Yahoo instead.

Hi Rick,
I'm not really sure whether this is what you're thinking of but...
Since INTEGRALTECH provides a VFW driver for their frame grabber you could,
e.g., use this tool from aNI server:
http://exchange.ni.com/servlet/com.quiq.servlet.GetObject/lv_vfw.zip?KEY=101
..97.12134.14&SIG=101.97.12134.14&EXT=mime:application/x-zip-compressed
It works very well but, like any VfW based application, has the disadvantage
of being able to read out only one camera at time. If you plan to use
multiple frame grabbers simultaneously you have to find a different
solution.
It should also be possible to call the DLLs INTEGRALTECH provides from
LabView.
Best regards
Arno
"Rick B." schrieb im Newsbeitrag
news:[email protected]..
>
My company is interested in purchasing a video inspection system that
> uses the following frame grabber:
>
>
http://www.integraltech.com/art/downloaded%20from%20current%20site/fbmv/docu
ments/fbmvlitespecsheet.pdf
>
> Integral Tech does not make Labview drivers for this card.
>
> Would there be a way to get these written, or would that be cost
> prohibitive ?
>
> Thanks for any suggestions.
>
>
> ---
> Rick B.
> Email: Use Yahoo instead.

Using a DaqBook/200 with LabVIEW "Driver set up"

Ok here's another round of dumb a*& questions.
I'm using a DaqBook/200 with DaqX software version 7.12.10 "latest and greatest except for the differential bug" I used their Daq* Configure Utility to set my DaqBook up. I created the following:
Device Name: DaqBook0
Device Type: DaqBook/200/260 (you pick this from a pull down menu)
Port (parallel) setup: LPT1
Protocol: Standard 4-bit
Having never used a Data Acquistion box before I tried to start with the simplest VI configuration I could find. I decided to use the "AI SAMPLE CHANNEL.VI". There are only five connections.
1st. Called "Device" this is the number I assigned to the Daq device during configuration. Now this should be what I typed above beside Device name: DaqBook0 "but I can only enter a number it want let me enter letters so I really don't know what to enter here now"
2nd. Called "Channel" identifies the analog input channel you want to measure. Using the DaqView software there are several columns that have names. The 1st column which you can't edit is labeled CH. Underneath is written P1 0 Direct. This means P1 (port 1 on the daqbook which is the analog port) 0 (which is channel 0 or the first channel) then the word Direct (meaning a direct connection to the Daqbook. Now next comes the "On" column which indicates if the channel is on/off. Next is the "Type" column this indicates if the channel is analog, digital, or frequency. Next is the "Polarity" column where you select either Bipolar/Unipolar. Next comes the "Label" column where channel 0 is labeled CH00 (by default)or you can enter a custom name. Then "Units" which indicates what type of measurement voltage, amps, counter, etc... The "Reading" column that indicates the output of that channel if DaqView is used as a stand alone.
Now out of all the columns above I'm not sure which to enter as the Channel as requested by the Labview VI above.
3rd. Called "High limit" this is the highest expected level of the signal I want to measure. This I think I can understand.
4th. Called "Low limit" this is the lowest expected level of the signal I want to measure. This I think I can understand.
5th. Called "Sample" contains the scaled analog input data for the specified channel. I know this is the data being measured, but I'm not sure what they mean by "Scaled"
Ok now that you know the information here's how I entered it.
Device- I put 0 because it wouldn't let me enter alphanumerical units. Help showed "I16" as the representation units. So I figured thats what I needed to enter and it could be change.
Channel- I enter CH00. I just could see entering a value that could be changed and the "P1 0 Direct" under the "CH" column just didn't seem right. But who am I to know.
High Limit- I set to 10.000Volts ( because I'm using a 9volt battery as a voltage source)
Low Limit- I set to 0.000volts
Sample- I just used an indicator to show the results.
When I run the VI I get the following error 10401 telling me that the specified device is not a National Instruments product, the drive does not support the device. Which I'm sure you know the error and the reason that it occurs.
So what do I need to start on first? Let me know

Dennis is correct here!
I did a project with one of these gizmos (the customer already had the device and was convinced it could do what he wanted). I was extemely disapointed with its capabilities.
At first glance it has some cool spec's but if you look real close it turns out that ther was no way to do a continuous acq with these things. That resulted in the app only being able to capture what the customer wanted every now and then.
I convinced hime to switch to an NI device.
If you are going to use this device, you have to use the drivers they provide.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

I have windows 7 and when i start up i tunes i get a message..."The registry settings used by the i Tunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall i

when i start up i tunes i get the message,"The registry settings used by the i Tunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall i Tunes." I tried reinstalling and still get the same message. when I ran the i Tunes diagnostics is says that the high and low filters are missing.
when i was having trouble with my optical drive(before Dell sent me a new one) the dell tech support representative had me delete some reg. files to try to fix the problem. I was told this would not affect the new drive when i install it or any of my existing programs. here is what he had me do....
Agent (CLKsmb_RyanJose_224427): "Click on Start
Click on Run
Type in REGEDIT
Click on OK
Click on the plus sign next to HKEY_LOCAL_MACHINE
Click on the plus sign next to SYSTEM
Click on the plus sign next to CurrentControlSet
Click on the plus sign next to Control"
Click on the plus sign next to Class
Click on the plus sign next to {4D36E965-E325-11CE-BFC1-08002BE10318}
On the right pane, click to highlight Upperfilters
Right click on Upperfilters
Click on Delete
Click on OK
On the right pane, click t
o highlight Lowerfilters
Right click on Lowerfilters
Click on Delete
Click on OK
Right click on Silent Install
Click on Delete
Click on OK
Close the Registry Editor
Reboot the computer
how can i get this message box to stop poping up every time i open i tunes? otherwise i tunes works fine. it still rips cd's. I just keep getting this message even after reinstalling i tines.
thanks,
chris

Refer to this article to fix:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299

Need the latest drivers for a Deskjet 895Cse inkjet printer

I wanted to download and install the latest drivers for an HP Desket 895Cse inkjet printer but the only driver updates that are available on your website are for an HP Deskjet 895Cxi. I've never owned an HP Deskjet 895Cxi inkjet printer; only the HP Deskjet 895Cse inkjet printer. Do these two models use the same set of drivers or does your website no longer offer updated drivers for an HP Deskjet 895Cse inkjet printer?
I'm planning to address various sized envelopes for Christmas cards which I have done in the past using my older model HP Deskjet 895Cse inkjet printer because my current HP printer; an HP C5280 Photosmart All In One inkjet printer will not allow me to print on odd sized greeting card envelopes; only standard sized business envelopes like a No. 10, No. 11 and a No. 12.
Last night I ordered new inkjet cartridges for my Deskjet 895Cse inkjet printer; a #23 color cartridge and a #45 black cartridge; both cartridges set me back about $70.00 after applying discounts and using a promo coupon code from HP. I spoke to someone in tech support overseas yesterday who advised me to download the most up to date drivers for my Deskjet 895Cse inkjet printer before I install the new cartridges and begin to address my Christmas card envelopes; about 75 envelopes; front and back.
If there are no new drivers available for my Deskjet 895Cse inkjet printer should I plan to return my new HP inkjet cartridges once I receive them because if my Deskjet 895Cse inkjet printer will not allow me to print on anything unless I install the latest set of drivers for my Desket 895Cse inkjet printer and if there are no new drivers currently available on your website I might as well return my newly ordered cartidges as soon as I receive them by Fedex from HP and get my $70.00 back. Feedback on this would certainly be appreciated.
Stevoreno
12/10/13

Why doesn't the website list the latest drivers for an 895Cse? Was the Deskjet 895Cse inkjet printer released for sale to the public before the Deskjet 895Cxi inkjet printer or visa versa? Basically what's the difference between the 2 models? Finally if I were to install my new cartridges which haven't arrived yet and choose not to install the drivers for the 895Cxi model will my 895Cse printer still work and be able to print?
Stevoreno
12/10/13

How do I download Windows 7 64 bit drivers for my new MacBook Air (Mid 2011) from a Windows 7 PC?

How do I download Windows 7 64 bit drivers for my new MacBook Air (Mid 2011)? I have already formated the HD and preformed a clean install of Windows 7. Perhaps I did this too early. I have read I need to install the drivers from my OS X DVD, however, OS X Lion does not come on a DVD! I've also read that I can download OS X Lion from the App Store and burn it to a DVD, however, all I have are Windows PCs which don't support the Mac App Store.
Is there no way for me to download these drivers from a Windows PC? I know they exist. However, you are supposed to download them through Boot Camp in OS X when you are creating a new Windows 7 installation. I'm I stuck?

I am pretty disappointed in the lack of documentation.
This is the Apple Support page for Boot Camp:
http://www.apple.com/support/bootcamp/
No mention anywhere of Lion, of 4.0/4.01
In the past, 10.6.6+ was suppose to - and sometimes did - provide for a download drivers from within Boot Camp Assistant program, in order to save them to flash or such (that should be about 1GB, too large for CD). Some macs req'd a USB-DVD or other driver that was needed pre-install of Winidows
You don't install Apple drivers until after Windows is installed otherwise,
It is possible for me, with a tower, to run w/o needing any drivers from Apple. But with laptops, mini, you do need some drivers from Apple for graphics, internet, wireless, SMC support.
And right now, loading any Apple support Tech Note articles is very very slow.
People keep asking why Apple can't post 3.0 or 4.0 like they do the updates. Only logic is to force t he download from inside OS X or from an OS X DVD. Otherwise would be here, and avoid all the trouble. they aren't of use on a PC, and any PC motherboard vendor does post their support software for download.
Apple Support Downloads #bootcamp

After I installed 10.6.8, my HP Officejet lost the ability to print 2-sided. I installed the latest HP drivers for Snow Leopard, but the 2-sided option is turned off and greyed out.

After I installed 10.6.8, my HP Officejet 7310 lost the ability to print 2-sided. I installed the latest HP drivers for Snow Leopard, the 2-sided option shows up in the print window but is turned off and greyed out. Also the scan function won't let me scan at any density greater than 150 dpi. I have talked to Applecare and to HP tech support and been told "too bad." Any help would be appreciated.

THANK YOU! And who are you? I spent a couple of hours on the phone with Applecare and with HP Tech Support and they couldn't fix what you did in a few words. Many thanks! John

Official release of XP and Vista drivers for Satellite Pro P100-465 PSPAEE

When will the drivers be available for both XP and Vista for the PSPAEE? Currently there are drivers for the PSPA4E some of which work, some not, on either operating system. Yes the laptop is preinstalled with the Vista Ugrade and the drivers work but two of the driver apps are blocked by Defender (NDSTRay / ConfigFree and VolControl). I could get no options to enable these (unclassified as yet from MS so they are locked out) I was told to disable Defender by tech-support!
I have tried a clean install of my own version of Vista Business and had driver problems with that as well.
I would like to run XP until Vista is, shall we say, more efficient but would like to use drivers specifically for it so a time-frame would be very useful.
I'd also like to know why there is a plug where a finger-scanner could go underneath the 0 of the number-pad, and a blocked-off lower PCMCIA (PCI-E?) port when neither of these are available as upgrade options? Did I miss those upgrade options or is this a case recycled from another model where they are available? If the latter then that's pretty cheap for a new machine :)

The Toshiba USA site offers comprehensive information on Vista upgrade and drivers for P100/105 machines which include similar ones to those released in the UK/Europe. If you want to be at the bleading edge of technology/take a chance see
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlViewDL.jsp?soid=1671921&moid=1674690&BV_S essionID=@@@@1075792543.1174388169@@@@&BV_EngineID =ccciaddkhddlhhkcgfkceghdgngdgmn.0&ct=DL
Cheers
Martyn

Tecra M7 - Where can I get drivers for Vista x64 or Windows 7 x64?

Hello,
I have a nice M7 tablet and I have to admit that despite all the problems on the hardware I like the notebook however toshiba is quite sad, and they never released any 64bit drivers for windows vista or windows 7 so what am I supposed to do? toshiba does not provide support for this computer seriously.
like toshiba is really absurt, last year I contacted them about a problem with my digitizer, dust was getting in between the plasstic and the LCD through the latch on top and they told me that they will format my computer and all viruses will be gone??? I was like, I dont want a format, physical dust is getting in my screen....
just because it is a discontinued model doesnt mean they can stop providing driver updates for the system.
It is a 64bit cpu, it supports 4 GB of ram, it is a tablet pc yes the hardware is probably 4 years old or more but still it is the best tablet I have ever used, I paid 2000+ USD (Tecra models are business models or they used to be) and toshiba is not providing drivers..........
Dont tell me to install 32bit win7 or vista, that makes no sense, I have 4 GB of ram, I have a 64bit cpu but a 32bit os that is totally bs too
Anyone know where I can find drivers, when I call tech support they tell me to ....

Hi
First of all I agree with you that Tecra notebooks are expensive and are business notebooks but you shouldnt forget that on 32bit OS the most applications are running properly and some older applications they are necessary in business sometimes not running properly on 64bit OS.
So I think for business 32bit OS is fast enough because you use 3.2 GB RAM that you should be enough if you dont play new 3D games.
Of course it would be nice to have 64bit drivers but you can collect http://aps2.toshiba-tro.de/wlan/ it yourself. The most Vista drivers are also work on Windows 7 so you should look for Vista drivers.
Here are some examples where you can search:
[www.intel.com]
[www.realtek.com]
http://aps2.toshiba-tro.de/bluetooth/
http://aps2.toshiba-tro.de/wlan/
Good luck!

ITunes Drivers for Burning CDs

I recently began receiving the message, "iTunes drivers for importing and burning CDs and DVDs cannot be found. Please reinstall iTunes." I reinstalled iTunes from my factory disc and the message still appears. I then copied my music library to another directory, and reinstalled iTunes and I'm still getting the same message. Additionally, when I tried to create a playlist from music I had downloaded from a CD, I get another message, "The song_ could not be used because the original file could not be found. Would you like to locate it?" Any suggestions on what might be causing these messages? I'm not very tech-savvy so would appreciate any help!

hiya!
(i'm just replying about the drivers message.)
"iTunes drivers for importing and burning CDs and DVDs cannot be found. Please reinstall iTunes."
that sort of message is often caused by a device filters conflict in your registry.
if the reinstall of the latest version that pac_80 recommends (it's a good idea) doesn't seem to help matters, there's some useful (somewhat advanced) techniques for tracking down the conflicts given here:
iTunes for Windows: Troubleshooting CD issues caused by device filters
.. but if you'd prefer to try some quicker and dirtier techniques, post back and we can run through those too.
love, b

How to get drivers and download drivers for my HP 2000-261NR notebook?

I need to download all the original drivers for my HP notebook so that they may be reinstalled on a new hard drive. The old hard drive failed. A new harddrive and Windows 7 64 bit OS have already been installed. The HP support website locks up in a continuous loop when it says it is searching for drivers. It's been almost an hour and it is still searching with no results showing. Here's a link to the page in question: http://support.hp.com/us-en/drivers/selfservice/hp-2000-200-notebook-pc-series/5091493/model/5119024#Z7_3054ICK0K8UDA0AQC11TA930O2 Been there for ages with nothing happening. In the past all we had to do was enter our model number and all the drivers available for download would be displayed. Why not the same thing now?

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP 2000-216NR Notebook and issues with the driver page. Here is a link to the driver page that might help. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. Here is a document on Hp Recovery Manager that will help you with any software and drivers that might need reinstalling. Hope this helps. Thanks.

Windows Server 2008 Standard Drivers for Intel I217LM Gigabit Network adapter

Hi everybody,
I am unable to find Network drivers for Intel® I217LM Gigabit Network adapter for Windows Server 2008 Standard (32-bit). I have found the drivers for Windows Server 2008 R2 but that being 64-bit do not work.Kindly help me in sorting out this problem as I
am stuck need to install the drivers.
Thanks in advance.
SHOAIB

Please post your question in Intel forums : https://communities.intel.com/community/tech/places
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

How can I install JDBC drivers for Oracle?!?....

i have a program that has this line:
import oracle.jdbc.pool.OracleDataSource;
that gives this error when I compile it:
package oracle.jdbc.pool does not exist
So I think I need to install JDBC drivers for Oracle. (?)
I went here: [http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/htdocs/jdbc_111060.html]
and downloaded the files for JDBC Thin.
Then I followed this: [http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/htdocs/111070_readme.html]
by entering these commands (I'm using Ubuntu):
export CLASSPATH=$CLASSPATH:/path/to/files/ojdbc6.jar
export CLASSPATH=$CLASSPATH:/path/to/files/orai18n.jar
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/path/to/files
When I type echo $CLASSPATH I can see that those commands worked, but it hasn't made any difference when I try to compile.
I still get the same error. Is it because I didn't do anything about the .so files? The readme page didn't mention them in the installation section.
Please help! I am so stuck...

I don't think you need the shared libraries (.so files) and given what I saw when I glanced at those pages, I don't think they'd even work for you, although maybe I just didn't read enough of it.
What happens when you type
javap oracle.jdbc.pool.OracleDataSourceon the command line?
How are you invoking javac? Are you perhaps passing a classpath argument?
Are you sure that the path to the jar files is correct? Are the paths relative?

Drivers for external tv coder ct6

he llo could anyone point me to a good link for the drivers for external tv decoder i bought it second hand but whith no driver software i have windows xp or does somebody know where how much the drivers would cost many thanks mike

stu's been with me the whole way, so he knows my pain! yes, the usb to serial converter was a fine idea until i realized it would not wake up after standby. I tried three different brands, but none would work after standby.
I think I'm finished with this project/disaster at last. It's not pretty, with no cover and fans twist-tied to the side of it, but it seems to be working reliably now (knock on wood). I had to take out a perfectly good tv tuner, but the usb one seems to have solved a battle I was having between MSI Radio and ATI's TV program over the sound drivers, so all's well that ends well.
thanks for the help, couldn't have done it on my own or with MSI's tech suckport!

Where can I download Windows 10 drivers for my Aspire 4738?

You were right!, I've upgraded to Windows 10 Home, but I had some missing drivers problems (screen, ethernet and touchpad), but fortunately forcing the drivers updates from the Device Manager solved all the problems.It's a shame when a manufacturer technically tells you: "screw you, you're alone in this", that's why I don't like Samsung smartphones, they abandon you so you have to purchase a new phone every year or you're left "obsolete".

So I have the Aspire M3970 as well. I applied for the Windows 10 upgrade, and it comes back saying I'm totally compatible. Install and any connection via the Internet to Micosoft programs (Edge, Search, Store, Windows update, etc.) doesn't work. Yet Chrome and Vista do work fine. Contact Microsoft and have a tech work on my system for a couple of hours and can't fix, then books an appointment for an escalated tech to work on it. He plays around for an hour tonight and then tells me that my computer doesn't have the drivers. Then...here is the kicker, I ask him to revert me back to Window 8.1 which you have 1 month to do so, and the message comes up that the files have been overwritten. Now I'm being told by Acer that I'm not entitled for support, being told by Microsoft to wait for Acer to fix the drivers but the can install Windows 8.1 but I will lose my bought and paid for Office Professional 2010. Is everybody just turnig a blind eye to customers for years to their products?

Drivers for I/O Tech Daqbook 200?

Similar Messages

Maybe you are looking for