DRM-21003 error for database connection

Hi,
I installed DRM 11.1.2 for win32 on my laptop and when I tried to set up database connection (to 11g XE), I am getting error message:
Connection Failed: DRM-21003: The Oracle.DataAccess client is not the expected version.
I installed Oracle XE 11.2.0.2 on my laptop. I also tried to connect to 10g server(10.2.0.4), but still has the same error.
Thanks.
-Rong

Hi,
Apparently,this is a bug in version 11.2.1.0.I had the same issue.I believe this is an bug identified internally.BUG # 9911822.I uninstalled 11.2.1.0 and installed 11.2.1.102 version of the DRM software and this error no longer appears.
-Sireesha.

Similar Messages

Error during database connection to the database : MS SQL Server 2008 R2

Hi All,
I am working with ABAP Proxy to Rec JDBC( Integrating XI with MS SQL Server 2008 R2). I am using SAP PI 7.0
I am getting error in RWB at communication channel monitoring :
Error during database connection to the database URL 'jdbc:microsoft:sqlserver://10.1.92.111:1433;database=XONTUSERVENTURA_ORG_TEST' using the JDBC driver 'com.microsoft.jdbc.sqlserver.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:microsoft:sqlserver://10.1.92.111:1433;database=XONTUSERVENTURA_ORG_TEST': SAPClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver'
I have given Connection details at Rec JDBC Communication channel as :
JDBC Driver as : com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection : jdbc:sqlserver://10.1.92.111:1433;database=XONTUSERVENTURA_ORG_TEST.
Please help me in this regard. I really appreciate your valuable information and time.
Thanks and Regards,
Ayub.
Edited by: Ayubsajjid on Feb 15, 2012 8:49 AM

Hi All,
Thanks for all your valuable inputs on my question...
As per all your inputs, we have to install/Deploy the below required jar files in the aii_af_jmsproviderlib.sda file
ojdbc14.jar
msbase.jar
mssqlserver.jar
msutil.jar
Can you please tell me from where we will exact this .jar file, bcoz we have search lotzz but we helpless.
We install from this link http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=21599--> we download sqljdbc_3.0.1301.101_enu file >sqljdbc_3.0>enu-->in that I find sqljdbc.jar and sqljdbc4.jar files only . I cant above said .jar files.
Please help me.
Regards,
Ayub.

Could not load library for database connection LCA

Hi,
I am facing RFC connection prblem while connectiong to database. I have installed SCM5.1 and live cache in single server
Please find the logs.
Work process log:
B Mon Jul 20 11:19:13 2009
B create_con (con_name=LCA)
B Loading DB library 'E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll) Error 126 [dlnt.c       241]
M          Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll'
[dbcon.c      4731]
B ***LOG BYG=> could not load library for database connection LCA        [dbds#1 @ 1035] [dbds    1035 ]
A
A Mon Jul 20 11:21:58 2009
A GENER starting remote generation: /SAPAPO/OM_SYNC_LC_DB (requested by W1).
B
SM21:
No shared library found for the database with ID LCA|
No shared library found for the database with ID LCA
/SAPAPO/OM17|/SAPAPO/OM_SYNC_LC_DB|K |SAP Web AS Problem|SBAC   |
Documentation for system log message BY G :
As well as the standard connection, an attempt was made to set up
another database connection, under the specified ID. The Shared Library
for this second database could not be found.
The Shared Library is usually found in the the Executable
directory (profile parameter DIR_LIBRARY) under the name dbs
<dbs>slib<os_ext>. <dbs> stands for the database type and <os_ext>
stands for the operating system-specific extension of the Shared
Libraries.
The database type is determined from the entry that corresponds to the
specified DB ID in the table DBDCON. Check whether the data in this
entry is correct.
ST22
Runtime Errors         DBIF_DSQL2_CONNECTERR
Exception              CX_SY_NATIVE_SQL_ERROR
Date and Time          20.07.2009 11:22:21
Short text
Error setting up a secondary database connection
What happened?
Connection to database system not possible with identifier "LCA".
|----
System environment
SAP-Release 700
Application server... "
Network address...... "
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 8
Shortdump setting.... "full"
Database server... "
Database type..... "ORACLE"
Database name..... "SC7"
Database user ID.. "SAPSC7"
Terminal................. " "
Char.set.... "C"
SAP kernel....... 701
created (date)... "Jul 6 2009 23:47:55"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "OCI_10201_SHARE (10.2.0.2.0) "
Patch level. 50
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 701
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Information on where terminated
Termination occurred in the ABAP program "SAPLSLCAPPS" - in
"LCA_EXISTS_LCA_ROUTINE".
The main program was "/SAPAPO/TS_BATCH_RUN ".
In the source code you have the termination point in line 23
of the (Include) program "LSLCAPPSU05".
The program "SAPLSLCAPPS" was started as a background job.
Job Name....... "MACROS"
Job Initiator.. "SC7GEN"
Job Number..... 10222002
The termination is caused because exception "CX_SY_NATIVE_SQL_ERROR" occurred
in
procedure "LCA_EXISTS_LCA_ROUTINE" "(FUNCTION)", but it was neither handled
locally nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLSLCAPPS "; its source code begins in line
1 of the (Include program "LSLCAPPSU05 ".
Please help me to resolve the issue.
Suraj

Hi Natalia Khlopina,
I have raised OSS message to SAP.
Below is the information
E:\usr\sap\SC7\SYS\exe\uc\Copy_ of_NTAMD64_15062009>sdbregview -l
Server Utilities    e:/sapdb/programs      7.7.02.08     64 bit    valid
DB Analyzer         e:/sapdb/programs      7.7.02.08     64 bit    valid
PCR 7301            e:/sapdb/programs      7.3.01.21               valid
PCR 7500            e:/sapdb/programs      7.5.00.42     64 bit    valid
SAP Utilities       e:/sapdb/programs      7.7.02.08     64 bit    valid
APO LC APPS         f:/sapdb/lcs/db/sap    6.00.004      64 bit    valid
Redist Python       e:/sapdb/programs      7.7.02.08     64 bit    valid
Base                e:/sapdb/programs      7.7.02.08     64 bit    valid
JDBC                e:/sapdb/programs      7.6.03.02               valid
Messages            e:/sapdb/programs      MSG 0.5010              valid
ODBC                e:/sapdb/programs      7.7.02.08     64 bit    valid
SQLDBC 77           e:/sapdb/programs      7.7.02.08     64 bit    valid
Database Kernel     f:/sapdb/lcs/db        7.7.02.08     64 bit    valid
Loader              e:/sapdb/programs      7.7.02.08     64 bit    valid
SQLDBC              e:/sapdb/programs      7.7.02.08     64 bit    valid
SQLDBC 76           e:/sapdb/programs      7.6.01.15     64 bit    valid
Fastload API        e:/sapdb/programs      7.7.02.08     64 bit    valid
C:\Documents and Settings\sc7adm>disp+work
disp+work information
kernel release                701
kernel make variant           701_REL
compiled on                   NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00
compiled for                  64 BIT
compilation mode              UNICODE
compile time                  Jul 6 2009 23:47:55
update level                  0
patch number                  50
source id                     0.050
supported environment
database (SAP, table SVERS)   700
                              701
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Thanks for quick responce.
Suraj

Win7 and now Server Error [2007]: "Database connection information not acce

I support a 8.3.x server with Insight plugin in use. This has worked for some time now with WinXP. The issue comes into play when the company is upgrading users to Win7 stations. First, the zero-admin (download and install setup launch) is failing. The Install window opens but doesn't seem to be able to complete. Then, when we do get the plugin installed via the manual download and install, we then reach a point where the bqy will not connect with the Server Error [2007]: "Database connection information not accessible. Processing is disabled." If we proceed from there, we'll get Server Error [6] PUB_NullArgument errors and empty "Show Values" limit boxes. So it's like the .oce information is not received on the Win7 platform - it still works fine on WinXP installations.
And, I know it can work, as the PC Support personnel were able to get this working on one PC.
Any suggestions?
Thanks,
Keith

I assume that there has been no reply to this thread. The problem still persists, with intermittent success. I hope that someone can shed some light onto the Server Error [2007]: "Database connection information not accessible. Processing is disables." message.
Thanks again,
Keith

Error during database connection (JDBC)

Hello!
When I try testing my connection to MSSQL (using sender JDBC channel) in communication channel monitoring (RWB)i can read that Error explanation:
Error during database connection to the database URL 'jdbc:microsoftsqlserver://<DB_IP_ADRESS>:1433;databaseName=XXXX' using the JDBC driver 'com.microsoft.jdbc.sqlserver.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Unable to locate a suitable JDBC driver to establish a connection to URL 'jdbc:microsoftsqlserver://<DB_IP_ADRESS>:1433;databaseName=XXXX''
Before I did the communication channel configuration I did the driver instalation and deploy like in document "HowTo_ConfigExtAdapters". In Adapter Monitor (RWB) i can see the JDBC adapter instaled and started (gray square).
Any idea what is wrong?

hi,
try this:
jdbc:microsoft:sqlserver://
and not
jdbc:microsoftsqlserver
Regards,
michal

Error on DataBase connection

Hi,
I try to connect my application (developt in C#) to an Oracle DataBase (in version 9.2.0.7.0).
In order to do that I use the following connection string :
"Data Source = (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST= myadress())"+
                    "(PORT=1528))(CONNECT_DATA=(SERVICE_NAME=servicename())));User Id=myaccount();Password=mypassword();";
And then :
using (var conn = new OracleConnection(GetConnectionString()))
     string Query = "SELECT * FROM DATA";
     var cmd = new OracleCommand(Query, conn);
     conn.Open();
I try to use the client 12.1 by using the Oracle.ManagedDataAccess.dll but I receive the following error :
"ORA-03111: Interruption reçue sur le canal de communication"
Nevertheless, I find in this communities: "The Oracle 12c client can only connect to Oracle DB 10.2 or later. 9.2 requires using Oracle 11.2 client or earlier." Link
That's why I try with client 11.2 by using Oracle.DataAccess.dll. But I receive another error :
"ORA-03134: Connections to this server version are no longer supported."
The DBA seems does not know why it doesn't work. So, can someone help me ?
Thanks a lot

If 12c doesn't show up when you click on "Deinstall Products" on the Oracle Universal Installer, then you have the 12c Home uninstalled.
Try this. Go to your Oracle Home for ODAC 11.2. The directory will be something like the following: C:\app\<user>\product\11.2.0\client_1.
Run the sqlplus.exe from this directory and try to connect to the 9.2.0.7 DB.
If it gives you the same error, then my suspicion is that DB 9.2.0.7 is too old of a release. You can either move the DB server to a higher version or try an even older ODP.NET 11.2 version or an 11.1 version.
I believe 9.2.0.8 was the last patchset available for the 9.2 line.

Set password for database connection at runtime

Hi there,
is it possible to set the password and/or the user for the database connection at runtime.
The use case is to read the values from a file and decrypt them, and the to establish the conenction. So that i don't habe to redeploy everything if there is a change.
Thanks in advance.

How exactly do i set these values for the datasource?
Edited by: Alex on 15.02.2012 09:50
€: JDeveloper 11.1.1.5.0
The use case is, that there is a file with an encrypted password. This should be decrypted and then be used for the connection. So when this encrypted passowrd changes, i don't want to edit and deploay the app once again. Instead the new encrypted password should be decrypted via code an then be used.
Edited by: Alex on 15.02.2012 10:00

Dynamic Parameter Prompting for Database Connection Password

Post Author: rsharp
CA Forum: Publishing
Hi
I've been finding recently that reports using dynamic parameters and published into Crystal Server prompt for the database connection password when the dynamic parameter is accessed. Thing is, this only started happening recently for new and already existing reports with dynamic parameters and I don't know why. In Crystal Reports the dynamic parameter can be accessed without a database connection prompt being displayed but not after publishing. (Maybe there's a problem with the Publishing Wizard?) Static parameters work just fine just as they always have, but I'm a bit mystified by the fact that dynamic parameters used to work (without prompting) but now they don't. Any advice or opinion would be much appreciated.

Post Author: amr_foci
CA Forum: Publishing
from the CMC you have to set the default connection or wat connection should this report use,
go to this report in CMC, click process tab, and check the connection

Design question for database connection in multithreaded socket-server

Dear community,
I am programming a multithreaded socket server. The server creates a new thread for each connection.
The threads and several objects witch are instanced by each thread have to access database-connectivity. Therefore I implemented factory class which administer database connection in a pool. At this point I have a design question.
How should I access the connections from the threads? There are two options:
a) Should I implement in my server class a new method like "getDatabaseConnection" which calls the factory class and returns a pooled connection to the database? In this case each object has to know the server-object and have to call this method in order to get a database connection. That could become very complex as I have to safe a instance of the server object in each object ...
b) Should I develop a static method in my factory class so that each thread could get a database connection by calling the static method of the factory?
Thank you very much for your answer!
Kind regards,
Dak
Message was edited by:
dakger

So your suggestion is to use a static method from a
central class. But those static-methods are not realy
object oriented, are they?There's only one static method, and that's getInstance
If I use singleton pattern, I only create one
instance of the database pooling class in order to
cionfigure it (driver, access data to database and so
on). The threads use than a static method of this
class to get database connection?They use a static method to get the pool instance, getConnection is not static.
Kaj

Run Labview as different windows user (for database connectivity)

I have to connect to a corporate remote MSSQL-Database on the network, using the database connectivity toolkit for LabVIEW.
The db-authentification is realized checking the windows user (ads) who acceses the datebase (not a database user / password which is standard in the database vis)
Therefore I have to run LabVIEW as the defined windows user, different than the logged in user on the pc.
Is that possible to realize with LabVIEW?
Other Windows-tools allow to define the windows user/password which "run" an application - how can I do that with LabVIEW?

Hi Zav. There is a windows command 'runas' which _may_ let you do what you want; I haven't
tried what you need to do, but is has worked for other tasks for us. Try 'runas /?' for the switches.
You will have to build your LV program into an executable, then use runas to launch it. Is there
a reason you can't just login to Windows as the required user?
If you can get your db admin to allow dbuser/password authentication that would be a much better
way to go.
Matt

Best approch for Database connectivity

Hi All,
I am developing web application.
Can any one tell me that what is the best approch to use database connectivity for my web application?
how can i mentain my connection object throught out application?
Please help me about my improving code logic for web application.
Thanks
Pandev

Consider connection pooling.

SQL Query for Database Connections

What would be the proper syntax or DBA table to query and find out how many database connections there are currently? Thanks for all of your help!!
Marlan

select * from v$session;Some entries in this view are dynamic processes (type = 'BACKGROUND') and you may want to exclude those depending on your requirements.

Report in production prompts for database connection info

Hi,
I'm using SAP Crystal Reports version for VS 2010 SP1. I'm trying to implement the most basic need--to create reports in a development environment and move them to production by just copying the .rpt files. I want to rely on the database connection string from web.config, but don't see how that is done. I've tried using ADO.NET DataSets from Project Data and can get the report to run while developing, but when I move to another server I'm always prompted with the "The report you requested requires further information" dialog.
I tried this solution, which keeps the db server name in a web.config variable:
           ReportDocument boReportDocument = new ReportDocument();
            boReportDocument.Load(Server.MapPath(rmCR.SelectedItem.Value.ToString()));
            ConnectionInfo boConnectionInfo = new ConnectionInfo();
            boConnectionInfo.ServerName = ConfigurationManager.AppSettings["dbServerName"];
            boConnectionInfo.DatabaseName = "dbCMRP_Employees";
            boConnectionInfo.IntegratedSecurity = true;
            ModifyConnectionInfo(boReportDocument.Database, boConnectionInfo);
            // Modify the ConnectionInfo for all tables in all subreports
            foreach (ReportDocument boSubreport in boReportDocument.Subreports)
                ModifyConnectionInfo(boSubreport.Database, boConnectionInfo);
            Session.Add("Report", boReportDocument);
            Response.Redirect("CrystalReportsViewer.aspx");
and this works fine in development, but when moved to a different server I get the "The report you requested requires further information" dialog. I've made sure that the db has the correct security settings, but can't find anything missing.
I'm sure I'm missing something basic, but can't seem to find any solution after searching for days. Any solution that allows me to create the report in VS 2010 and copy to a production server will be appreciated.
Thanks,
Dan

Thanks for your replies.
I think I've done what's outlined in the Troubleshooting Guide link that Ludek gave me. I did install Process Monitor and found the "Access Denied" entry, but I'm not sure which folder needs permission given to IIS APPPOOL\ASP.NET v4.0.
Here's the entry from Process Monitor:
Description:        IIS Worker Process
Company:           Microsoft Corporation
Name: w3wp.exe
Version:               7.5.7601.17514
Path:     C:\Windows\SysWOW64\inetsrv\w3wp.exe
Command Line:                C:\Windows\SysWOW64\inetsrv\w3wp.exe -ap "ASP.NET v4.0" -v "v4.0" -l "webengine4.dll" -a
.\pipe\iisipm461f344a-3d68-4e7c-b42e-ca18eac4553c -h "C:\inetpub\temp\apppools\ASP.NET v4.0\ASP.NET v4.0.config" -w "" -m 0 -t 20
PID:        7512
Parent PID:         3892
Session ID:          0
User:     IIS APPPOOL\ASP.NET v4.0
Auth ID:               00000000:00465886
Architecture:     32-bit
Virtualized:         False
Integrity:             High
Started:                8/29/2011 1:03:58 PM
Ended: (Running)
Modules:
w3wp.exe           0x120000             0x8000 C:\Windows\SysWOW64\inetsrv\w3wp.exe      Microsoft Corporation                7.5.7601.17514
Microsoft.Web.Administration.dll            0x28ae0000        0x24000                C:\Windows\assembly\GAC_MSIL\Microsoft.Web.Administration\7.0.0.0__31bf3856ad364e35\Microsoft.Web.Administration.dll                Microsoft Corporation   6.1.7601.17514
App_Web_822ce1a1f503e532a2e860f7ce344f6d0d0f2eba.ascx.3417f053.eb4fk61t.dll     0x28b10000        0x8000                C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\intranet\58a686e6\86baa618\App_Web_822ce1a1f503e532a2e860f7ce344f6d0d0f2eba.ascx.3417f053.eb4fk61t.dll                n/a         0.0.0.0
App_Web_aed28e8a45aa161f6c9fc3f563283cb89b317bdc.ascx.3417f053.rodqolhn.dll     0x28c90000         0x8000                C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\intranet\58a686e6\86baa618\App_Web_aed28e8a45aa161f6c9fc3f563283cb89b317bdc.ascx.3417f053.rodqolhn.dll                n/a         0.0.0.0
pvlocale-1-0.dll 0x2fc80000          0x76000                C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\pvlocale-1-0.dll      SAP BusinessObjects                14.0.0.760
System.Data.Entity.ni.dll              0x2fd50000         0xcb8000                C:\Windows\assembly\NativeImages_v4.0.30319_32\System.Data.Entity\978e8514751373383f79c3fdd667aa2b\System.Data.Entity.ni.dll                Microsoft Corporation   4.0.30319.1

FIM 2010 Sync Error : stopped-database-connection-lost

Hello everyone,
a weird thing just happened to me,
i'm synchronizing my MA and suddently i get the "stopped-database-connection-lost" error
i have 5 Galsync MAs working perfectly and this sixth one just failing ... (since like today)
which makes me wonder what is happening ... ?
any ideas ?
thanks !
Hitch Bardawil

Hitch,
Look in the event log on the FIM Sync Server and on the SQL Server.
This error occurs when FIM can't contact the SQL Server that hosts the FIMSynchronizationService database.
Does this happen every time the sixth MA is run? What if you run them in a different order (might help us distinguish between a resource issue and something specific to that MA)?
Here are a few related threads:
http://social.technet.microsoft.com/Forums/en-US/65920fc0-a9ac-4a87-892f-338a6884cbd5/action?threadDisplayName=fim-ma-run-profile-stuck-with-stoppeddatabaseconnectionlost
http://social.technet.microsoft.com/Forums/en-US/39129eac-09d3-48ff-83f9-ecb4ae2424b6/action?threadDisplayName=sharepoint-profile-synch-stoppeddatabaseconnectionlost
David Lundell, Get your copy of FIM Best Practices Volume 1 http://blog.ilmbestpractices.com/2010/08/book-is-here-fim-best-practices-volume.html

Exception for database connectivity

I am executing a procedure that calls some functions that get data over a dblink. Now I want to add some code to check for database availablity etc upfront in my procedure before calling the function and raise exception and end it.
I was thinking of trying like
select sysdate into t_date from dua@dblink
Now I am not sure how to check the status of this sql statement .
Any comments/advise is appreciated
Thx

Hope this helps; Handling Errors in Remote Procedures -> http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14231/ds_appdev.htm#i1007937
When the database executes a procedure locally or at a remote location, four types of exceptions can occur:
* PL/SQL user-defined exceptions, which must be declared using the keyword EXCEPTION
* PL/SQL predefined exceptions such as the NO_DATA_FOUND keyword
* SQL errors such as ORA-00900 and ORA-02015
* Application exceptions generated using the RAISE_APPLICATION_ERROR() procedure
When using local procedures, you can trap these messages by writing an exception handler such as the following
BEGIN
EXCEPTION
WHEN ZERO_DIVIDE THEN
/* ... handle the exception */
END;
Notice that the WHEN clause requires an exception name. If the exception does not have a name, for example, exceptions generated with RAISE_APPLICATION_ERROR, you can assign one using PRAGMA_EXCEPTION_INIT. For example:
DECLARE
null_salary EXCEPTION;
PRAGMA EXCEPTION_INIT(null_salary, -20101);
BEGIN
RAISE_APPLICATION_ERROR(-20101, 'salary is missing');
EXCEPTION
WHEN null_salary THEN
END;
When calling a remote procedure, exceptions can be handled by an exception handler in the local procedure. The remote procedure must return an error number to the local, calling procedure, which then handles the exception as shown in the previous example. Note that PL/SQL user-defined exceptions always return ORA-06510 to the local procedure.
Therefore, it is not possible to distinguish between two different user-defined exceptions based on the error number. All other remote exceptions can be handled in the same manner as local exceptions.

DRM-21003 error for database connection

Similar Messages

Maybe you are looking for