Droid x2 connection issues

I currently have a Droid X2 that has poor network coverage, and rarely gets more than two bars of coverage. This it while I am impractically standing under the Verizon tower.When placing a call the two bars instantly goes to one or none after the send button is pressed. The call quality is poor and scratchy rendering the phone useless, and data transfer is also affected which makes other applications not work properly. Is anyone else having issues with this device? I am in Verizon network area and have two other devices that have excellent (full service) and work properly. Having being with Verizon for many years I have always had good signal until my original Droid met its demise and was replaced three months ago with this Droid X2. Since then coverage has been terrible and I have had numerous issues with the phone. The original Droid X2 was replaced a week ago and the new phone (not refurbished) is having the same issues. This is were I have began to have many more problems, not only with the phone but also with some Asurion and Verizon support staff. My phone calls started to Verizon tech. support, where I was assisted by a very helpful gentleman who verified their was no network issues in my area, and offered to trouble shoot my device. He notates service issues that I was having with the device and also believed it was a phone issue since the phone was new, no reported network issues in area, and the second device with the same problems. But problem being I called from that device, despite knowing better, since I was sure it had to be a network issue since the phone was new and it was the 2nd device having the same problems. His advice was to call back from another phone and Verizon would take care of the problem (replace the phone if needed under manufactures warranty) and further troubleshoot the device. This was a acceptable solution since I did call from the defective phone. In a few hours call Verizon tech support again and troubleshoot the phone with a less than helpful individual. We run the standard *228 option 2 then option 1 several times, reset the phone, rest phone remove the battery, restore factory settings ect. and despite his efforts and attitude the phone has the same problems of poor signal. Despite making the call from a family members Verizon phone with full service his answer was that "sometimes phones do that" meaning loose service. This was a unacceptable answer to the problems I am having with the device and poor customer service. With this individual not able to provide a solution to my devices issues I then contact Asurion who troubleshoots the device. Repeat steps from before, transfer me to advanced tech., run around a little more, and decide that the device is defective. They replace the defective device and take my payment information incase i do not return the 2nd defective device, and ensure the phone will be delivered on Friday June 8th at 2:30pm, this is on wend say.
     So on Thursday, since I was dissatisfied with the customer service I received from Verizon, I again call Verizon tech. support. The gentleman that politely addressed the poor service that I received the night before, did many more test, opened a ticket to check the network in area, and felt confident that their was a issue with the phone. To ensure all problems were addressed he did required steps to send me to level 2 support (what ever that means). This man was also helpful, attempted to resolve the problem, and performed more repeated test. Didn't seem advanced to me but OK. After all this the phone still has two bars and no better service and still looses almost all signal when the send button is pressed to make a call. He says he will call back the next day, in my opinion to see if the phone has completely died yet. Another mess up for Verizon and I'm starting to get frustrated with both customer service teams. Finally Friday gets here, seem like forever if you depend on your phone and use it for business purposes, and I wait for the device to arrive. After working a 16 hour day I arrive home to activate my 3rd Droid X2. Problem is the phone never arrived despite my grandmother being at the house all day. So I check the tracking information, and it shows that the device was delivered on 6/1/12 (date second phone was delivered) not today the 8th. Accepting the possibility that I entered a tracking number wrong or something I again call Asurion support. Sorry the computer had a glitch and the device wasn't shipped despite order numbers and other information being generated. The service represented was polite and it does no good to yell, here we go again. She offers to plance another order for the replacement phone but it will be Monday. The phone is getting progressively worse as well as my patience with this issue. I understand things happen but, WOW so many in a row, and will the 3rd Droid X2 have the same defects.
     Having been told by Verizon they would take care of the phone since it is under manufacturs warrantiy I decide to call them and reverify the information they had provided before driving to a corporate store the next day. Not wanting to be without a phone for 5 days that i use at work. The Verzion rep. that receive this time is polite and discusses the problems that have occurred. Already frustrated, she (an advanced tech.) walks me through the try this, call this, and reset this routine; despite stating she sees the information in the notes on my account. I complete all the task she asks and she determines that the phone is defective ( this makes 2 Asurion and 3 Verizon techs. determining the phone is junk at a week or less old). I inform her that another Verizon rep. said that Verizon could replace this device under the manufactures warranty, and that I wanted to verify this information and make arrangements with the local Verizon company store so I could get this resolved. She informs me that their is nothing the Verizon can do because even though it is a new phone under manufactures warranty Asurion sent the phone. This made it Asurions problem and mine. I do understand policy's, and many of these guidelines are their for most transactions. But many service failures during this transaction have occurred by both companies. Verizon provides me phone service, and contracts the insurance with Asurion, so I feel that Verizon could take a few steps keep a customer happy, and retain contract holders. And at this point I am really dissatisfied with both service providers. And when the 3rd Droid X2 arrives (hopping for no computer glitch--fingers crossed) will work and maintain a signal for voice and data despite the failure of the previous 2 in three months?
     Needing a phone and since all three phones are out of contract, getting a replacement tomorrow could be easy.
     But after the service that I have received in the last week from Verizon, I am not sure that I want to sign a contract with them.
     With the billing cycle ending on the 13th my options are to jump ship and switch carriers, or wait till Monday and hope the phone arrives. And if it does show up will it work, my other verizon phones do perfectly, but who knows with these x2's.
Any Suggestions???????????????????           
Sorry for the rant. I just need a phone, and tired of technical support/customer service.

BTW, this is a peer to peer forum and not a direct line to customer service.  From what I was able to make out from your wall of text was the signal in your area is not the best.  The troubleshooting you mentioned is what most of us here would have suggested as well.
If you are looking at going to another carrier, I would suggest testing that carrier out before switching.  If you have friends with that carrier, invite them over and see what their signal is like where you want service.

Similar Messages

  • Droid Maxx connectivity issues

    I have been struggling with connectivity for a while now. It will blink 4G on and off, It wont go to 3g at all so when there is no 4G I have no data. Ive tried pulling SIM and reinserting, turning on and off and turned my network to LTE/CDMA. I don't know what else to try?

        TTokstad lets get you in the fast lane! What zip code are you located in? Do you have trouble indoors and outdoors?
    AshleyS_VZW
    Follow us on Twitter @VZWSupport

  • AOL email connectivity issue - Sends but does not receive

    I have 2 AOL email accounts on my Droid X.  Up until Thursday, I had no issue receiving emails to both addresses.  Suddenly on the Thursday my default account kept indicating connectivity issues with the account.  The other AOL account worked perfectly. 
    I can still send from default AOL account and they are received, but I am not able to receive any email into this account.  I tried to forwarding these email addresses to my gmail account.  But gmail is not receiving emails from either account.
    Any suggestions?

    SHAC wrote:
    This is amazing!
    i didn't know people still used AOL mail LOL 
    Time Warner took over AOL and allowed customers to retain their AOL accounts to minimie the headache of converting everyone...  
    Now to the ones having issues, have you tried contacting AOL and make sure they are not transferring or updating a server, because usually when they do this it can effect some accounts but not other just as you have discribed. They may require a new port entered or even pop, imap or smtp access information.  Drop them a call and verify incoming and outgoing addresses.

  • Droid 3 Connection Problems?

    Droid 3 was working fine yesterday.  This morning I go to check my Facebook (through Facebook's app), and get time outs due to "Network Connection Issues".  The browser will connect to Google, but cannot connect to any other website because "Data connectivity problem. The server failed to communicate. Try again later."  It will connect to the app store, but cannot download any updates for current apps (I was trying to see if perhaps the anti-virus software needed to be updated, even though it's set to automatically update).  I can send/receive e-mails (but cannot see pictures included in the e-mails), can send/receive texts, and make phone calls just fine.  I show 4 full bars of service and 3G.  Any help on fixing this issue would be most apprecaited.
    Specs:
    System version - 5.7.906.XT862.Verizon.en.US
    Android version - 2.3.4
    Signal strength - -63 dBm 0 asu
    Network - Verizon Wireless

    I am having the same issue on my Droid3 and so is my wife with her Droid3.
    System Version: 5.7.906.XT862.Verizon.en.us
    Android: 2.3.4
    Signal: -73dBm 0 asu
    CDMA - EvDo rev. A
    I have tried rebooting and *228, but nothing is working.  Can receive text messages, but no media and no browser/facebook/etc.

  • Wifi connectivity issues: The answer may be here.

    I had been having issues with my Droid 3 connecting to my home router. I would put the password in and it would go through the cycle of connecting and disconnecting for no apparent reason. I searched online for a solution for this and found nothing helpful. I also found that a lot of people are having the same problem. So, I did a little searching on my router's settings. (http://www.daniweb.com/hardware-and-software/networking/threads/39326) Everyone's router is set up a little bit differently. However, if you click on Wireless, and then Wireless Security, it should tell you what your WPA Shared  Key is. I entered this key instead of my password and, hey, look at that. My Droid finally connected to my wifi. Hope this helps.

    Ohmigosh! THANK you! I just installed a new router, my old one was an 8-year-old NetGear, which I had no trouble connecting to with my LG Lucid. The new D-Link and my Lucid simply would not hook up. It just kept 'obtaining IP address'. Grrrr....
    It would be nice if LG would ask for the WPA Security Key instead of the password.
    Again, thank you thank you!

  • Droid Charge Many Issues

    I have been having a lot of problems with my Droid Charge. I was wondering if other people are having the same issues? This is my first smart phone so I am new to smartphones.
    Here are the issues I have been having.
    1. 4G 3G reception is not consistent. I have been in areas (zipcodes 91304 and 94598) where 4G coverage is solid, but my phone is always down on 3G, and sometimes will even go down to "1X" when other friends around me are on 3G. Sometimes I restart the network connection by going to CDMA and then back to LTE and sometimes this will work, sometimes it won't.
    I went to the Verizon wireless store today and they replaced my simcard. This has not helped however.
    2. Charging using laptop - the phone charges extremely slow, but this isn't the issue because I heard this is normal. One time while charging off my laptop, it got really hot, not sure if it was the screen or battery or both, but the screen no longer accepted touch inputs. I couldn't even hold down the power button to restart or shut down the phone properly. I was afraid it would continue to get hotter, so I had to just unplug the battery to shut off the phone.
    3. Charging in my car using a power inverter and a wall charger (the one that came with the phone) - when I do this, the screen goes wacky, and will not accept my touch inputs, or the puzzle piece you use to unlock will go somewhere my finger totally isn't. I have to unplug the phone in order to get touch input/control back. - this issue was solved by buying a car charger, but I have never had any electronic device that had issues with a power inverter before, cell phones, laptops, TV's, they were all fine so I don't understand why this phone can't use it.
    4. Also, while using GPS, sometimes the phone shows me in a part of town 3 miles away from where I am, and then after a long time, like 5 minutes, it will get my location correct, after jumping around for awhile. I'm not sure if this is normal.
    Has anyone else had these issues and no how to alleviate them?

    I'm beginning to think that "Rule the Air" is the BIGGEST LIE in the wireless world or at least, with the Droid Charge.
    I work in zip code 10041, live in zip code 10036, and work out in zip code 10019. My connection speed regularly drops to 1x or no connection. Sometimes, my phone displays 4G but takes minutes to load Google or return search results.
    My associate who sits next to me  has the same experience.
    I've read in other forums that the Dord Charge seems to have WEAK 4G radio (especially compared with the Thunderbolt). Some suggest there's a firmware issue as well.
    I've mentioned this to a tech service rep who confirmed I shouldn't have connection issues in my area. He also recommended shutting dow the phone every two days. Sometimes it works, sometimes it doesn't.
    Also, I've noticed that the battery is draining faster now (after jsut 1 month of use). I usually end up charging my phone at noon at in late afternoon.
    I wish I could still return this Droid Charge.

  • Data/3&4G/Wifi connection issues!

    I live in an area that is supposed to have good 4G coverage, but... I don't.  This wouldn't be such a big deal to me if I could get reliable 3G coverage, but... I don't.  Even then, if I could just get the phone to perform when connected to my wireless at home, I could deal with the outages, but... I CAN'T!  I have had sporadic coverage, at best, for the last few months, and I'm getting sick of it.   I have restarted the phone, turned the airplane mode on and off, checked for updates.. etc.  I haven't had data coverage for more than a few seconds today-- and despite showing a strong wireless signal, the phone still will not work.  I'm not satisfied with Verizon's usual reply of "do a master reset."  I shouldn't have to reset my phone every time I have connection issues--- My husband has a 3G only phone, and his works pretty well.  He doesn't understand how my "better" phone can't accomplish anything more than a phone call.  I have been a customer with Verizon for over 10 years, and I get a discount through my place of employment, which has made me stay a lot longer than I should have, but I'm just not happy with anything they're doing these days.  Customer Service is nonexistent both in the Wireless and Residential forums, and I'm paying them too much money to let them treat me like crap.  If you can't make your 4G system and phones work correctly, then don't roll out 4G..simple as that.  Why don't they have to issue recalls like other companies?? They aren't giving us what we pay for! 
    My rant is over..  I am going to be switching networks.

    I had the same problem, called Verizon and they didn't offer a fix just said I was close enough to renew my contract they would allow me to get a new phone early so I got a Razr Maxx, wasn't really sure to get that or the Iphone 4S. My previous phone was the Droid X, having the same problem as you described, while waiting for my new phone to arrive I decided to try and repair my phone. Go to "Battery and Data Manager/ Data Delivery/ "Data Enabled"   have that checked and I also have Background Data Checked. I believe what may have caused it was settings for when my battery would get low it would shut off different properties, but I am not positive. Hope this helps.

  • HP PhotoSmart 7510 suddenly has severe connectivity issues

    I have a HP PhotoSmart 7510 printer since about 2 months. Initial setup worked like a charm and the printer has been working pretty much perfectly for the last 2 months. Wireless printing, scanning and internet access on the printer (e.g. for Facebook photos) all worked. Just from time to time i would get the occasional (mildly annoying) message on my computer saying "scan to computer is currently unavailable" but it usually worked itself out and whenever I needed it to work, it did work.
    But since a few days ago, it has some severe connectivity issues. I didn't change any settings on the printer, router or computer - the issues just started appearing by themselves. I startet getting much more frequent messages on my computer saying "scan to computer is currently unavailable". I noticed I couldn't print anymore, and restarting computer, printer and/or router didn't help at all. The only thing so far i managed to print wirelessly since the problems started were the first 5 pixel rows of an image I tried to print, the rest didn't transmit.
    It seems the printer still connects to the WLAN but printing and scanning no longer work, and whenever I try to access a web service on the printer (like Facebook) it says it has no internet connection, even though the WLAN light is lit up (not blinking) and all the wireless status reports say "congratulations, no problems found" and display IPs etc. just like normal.
    I looked at the threads "PhotoSmart 7510 connects to router, but not to the web.", "Wireless printer (HP Photosmart 7510) not connecting to network" and "Photosmart 7510 won't connect to Web Services" but they weren't a big help. Activating EWS didn't work because even though the printer showed its IP address to be 192.168.1.3, when I entered this in my web browser it didn't find the printers configuration page.
    I tried the following steps from one of the threads:
    1. Restore the Network defaults
    2. Unplug the printers power cord while it is still on. Leave it unplugged and walk to the router.
    3. While the router is still on, unplug the power cord from the router, leave it unplugged for 30 seconds, then reconnect the power cord to the router. Once plugged back in the router should power on automatically.
    4. Plug the power cord back into the printer. Once plugged back in the printer should power on automatically.
    5. Run the Wireless Setup Wizard to reconnect the printer to your wireless network.
    6. Try enabling Web Services.
    I followed these steps exactly. Interestingly, even though I had done step 1 and restored the network settings to factory defaults, after turning back on, the printer somehow still had its old settings saved and reconnected to the network.
    It seemed to have fixed the problem, the printer finally had internet access again (Facebook app showed my photos) and scan to computer found my PC. But after just about 3 minutes, the printer had lost its internet connectivity again. When opening the Facebook app, it displayed the same error message it did before. And printing no longer worked as well.
    So, what is wrong with this printer?! It has the newest software update by the way (I checked during the 3 minutes it had internet access.) My computer is a HP Windows 7 x64 machine (EliteBook 6930p) and the router I'm using is a Netgear WNDR3700.
    I specifically bought this printer for my studies at university. In one week i have my exams and in order to study I REALLY need to be able to print some of my course materials! So any help as quickly as possible would be greatly appreciated. Or do you think this is a case for a warranty replacement, considering the printer's really strange and error-prone behavior?
    Thanks a lot!

    I can assure you that it is not a router issue.  It appears to me that it is a driver compatibility with Windows OS.  After trying to get to the bottom of this since my Photosmart 7525 was new and reading just about every forum and blog, I have come to the conclusion that the issue must be related to the HP driver itself.  
    The issue does not seem to affect any Mac systems, and from one forum someone was able to fix it by downloading new drivers compatible with 64-bit systems (which seem to not be affected by the glitch).  But that leaves us 32-bit people stuck with the current driver which does not work.
    The printer is connected with good signal to the wireless router (no matter who's router it is and what configuration is made).  The printer can be pinged from the router and any computer on the network which is not currently being affected by this issue.  However, the affected computer fails pings by either request timed out, or destination host unreachable.  Pings are successful from the affected computer to any other device on the network.  The only way to recover (at least for a few days) is to reboot the affected computer.
    Also, from the display on the 7525, the network tests pass without issue.  I can also download and print content from the internet with no issues.  
    Please do a quick google search of this issue and you will see several THOUSAND entries of people with the same request.  This is a serious issue that people are having and everything is pointing to an HP problem (not routers, improper installation of software or drivers, etc...).  I agree with several other customers that HP should be on the hook for this fix.  I will give it another couple weeks, then back to the store for a reliable unit from another competitor (Canon, Lexmark, etc..)
    Thank you in advance for escalating this issue to product engineering,
    S. Hunn
    There are 10 kinds of people in this world... Those who understand binary and those who do not.

  • Connection doctor and connection issues

    I have nothing blocking  my internet connection, however mail is a nightmare for me. I continually receive connection issues via the connection doctor for imaps, pops, and icloud.
    Are my settings wrong? I have checked with each of the settings and they are set per instructions provided. Some are google, some yahoo, icloud, etc.
    This is really annoying and I could really use some help.
    Here is a typical message: Could not connect to this Google IMAP server. Check your network connection and that you entered the correct information in the Account preferences. Also verify that the server supports SSL. If it does not, deselect the 'Use SSL" checkbox in the Advanced tab of Account Preference"
    I have done all of this and am still having troubles.
    I am also receiving SMTP connection issues - "Trying to log into this SMTP account failed. Verufy that the username and password are correct."
    I have checked and all are correct. Even more confusing, these issues are not present all the time - however I have not changed anything between when times are good and bad.
    Sigh - I hope someone has an idea to help me out.
    Thanks in advance for your time and thoughts.
    Patti
    I am running osx 10.8 mail 6.2 and use xfinity for my internet (as I mentioned, I disabled their firewall trying to fix this)

    Hi there Japps1,
    You may find the troubleshooting steps in the article below helpful.
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    -Griff W.

  • Excel ODBC Connection Issues

    I'm having some issues importing external data from an Oracle 9i database.
    Here is what is happening:
    I am initially able to import data from the table I want to into Excel.
    I do this through "Data -> Import External Data -> New Database Query" where I have my .ORA data source. I'm able to log in using my user and password and import the table. My problems come after I import this first set of data.
    If I try to "Edit Query…" I get an error box that says "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed".
    If I try to "Refresh Data" I get two error boxes. The first is just: "[Microsoft][ODBC driver for Oracle][Oracle]" and the next says: "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed". It then prompts me for the User name and password of the DB I'm connecting and after I enter the information, I get the same two error messages.
    Also, if I attempt to establish another connection following the "Data -> Import External Data…" steps I run into a different problem. Upon entering the information for the User Name and password prompt I get two error messages. One says "!" and the next box says "Couldn't read this file". Once I click "OK" in those boxes, the Microsoft Query window automatically opens with nothing in it.
    I can't seem to figure out why I can initially pull down data and then cannot succeed afterwards. I'm unable to connect to the DB I have through Excel until I completely closed all Microsoft Excel instances.
    I also use this data source in Microsoft Access without any problems.
    My Excel version is 2003.
    I'm using Oracle Drivers I'm using are from an "Instant Client" package.
    Any thoughts why I'm having these connections issues?
    Thanks in advance.

    This issue is closed.
    The solution was:
    "Data -> Import External Data -> Import Data"
    Select "New Source" and select the "Oracle" data source and filled in the appropriate information. This was similar to the database query but it actually works.

  • My brand new mac pro always had Internet connection issues at school. WHY is that? I see the school's Internet working perfectly fine on other PC's, but there is never a day where my mac doesn't have Internet connection issues at school. How do I fix it?

    I got my mac pro in the middle of August. School started the week after. Internet was working perfectly fine at home. But at school, I never had a good connection. Sometimes on the good days I get a connection when I'm sitting at the exact spot in class I always sit at. It's ridiculous and it's frustrating. I invested my money into this laptop and I'm beginning to regret it. I thought it was the school's Internet, but I don't see Internet issues with other PC users. It's most frustrating on registration days and I'm trying to register for my classes before it gets taken, but again... Internet connection issues. It's random. Majority of the time, it doesn't work at all. I've done Network Diagnosis and turning WiFi off then turning it on again. I've done everything I could. I put my money on this laptop and it was a lot of money. I could have bought an 800 dollars laptop and I would have Internet connection anywhere on campus. So, I don't want to continue everyday to regret on buying this laptop every time I try to connect to the Internet at school or Starbucks or anywhere else. How do I fix this? What's the problem ?
    At school, I heard this guy had a problem with Internet connections too and he owned a new mac book pro. He said something like Apple messed up on something, but he fixed it. If I knew mac book pro's had these issues I wouldn't have bought it in the first place. It's freezing on me every other day. It's ridiculous. But what concerns me the most is the Internet connection. So someone please tell me what can I do next to prevent the problem? Am I doing something wrong maybe?

    Hi Kevin,
    I'm using an XLR input mic which is connected to the phantom power enabled XLR mic socket on a USB M-Audio M-Track. The M-Track is connected by USB to the Mac Pro - so effectively I've got an M-Audio USB soundcard with a mic input.  I've also tried a microphone that is a straight XLR to USB cable (guessing with some soundcard chip buried in the usb plug) but that also yields the same effect of bad latency, intermittent quality, stuttering and repeating and echoing (without the speakers on during record so its not feedback).
    The mic works absolutely fine with other recording applications I have on the mac at the moment - albeit non-adobe ones (tested it on the EasyAudioRecorder - and it lives up to its name. it's easy)
    I will try with Audition and report back, but sitting here right now I can imagine it would work fine with audition too - it just seems to be the way premiere is set up for recording into the timeline is a bit sketchy.  I'm willing to accept it might well be a quirk with the new Mac Pro trashcan - I'm not weighting all the woes on premiere.
    Any thoughts or am I out of luck to sit with my fingers crossed for a fix in the next round of updates?
    Nathan.

  • Connection issues with Safari 3

    I'm having some connection issues with Safari 3.
    When I connect wirelessly, Safari won't load any web pages. I go and use Firefox and everything is just peachy.
    I've reset Safari, emptied the cache and whatnot. I went in and checked the permissions, everything checks out.
    When I connect with Ethernet, there's nothing wrong, which is my dilemma.
    Help would be greatly appreciated.

    There are a number of posts in the Leopard forum from people with direct experience with upgrading from Panther to Leopard. Here is a relevant thread from there that should reassure you.:
    http://discussions.apple.com/thread.jspa?threadID=1418714
    Your system should be fine for Leopard, but you will probably need a current version of Photoshop if you don't already have it. See this download:
    http://www.adobe.com/support/products/pdfs/leopardsupport.pdf
    Also, Leopard doesn't run Classic (OS 9) apps.
    One caveat - first make a bootable backup "clone" of your present system onto an external firewire drive so you can recover if anything goes wrong. You can use the "Restore" tab of Disk Utility to make such a clone, and there are also Panther-compatible versions of Carbon Copy Cloner (v 2.3) and SuperDuper (v 2.1.4), both excellent for this.
    It's even possible to a create second Panther clone on a different external volume to create a "dual-boot" system, using that volume to continue to run old applications that you can't run with Leopard.

  • Connection issues with EA4500

    I had bad connection issues with my mobile device, so i pressed reset on my EA4500 router, and now when i connect to my network, it gives my limited connection even though i have 5 bars of signal. Not sure what to do now...

    Resetting the router will erase all the settings you configured on the router since the initial setup. You manually configure the router's wireless settings so your wireless devices can have internet access again.
    Procedure: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=cfb50c0dc992443ab2405a782cca60f7_19073.xml&pid=80&...
    Make sure to use a computer that is hardwired via Ethernet cable to the router.
    For bad connection issues: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=cf6ed888ce144d06905af4987887fd1b_KBxxxx_EN_v1.xml&...

  • X1 Carbon (20AX series) wifi connectivity issues

    Dear Lenovo Support and all others,
    I am posting this in hope that someone can help with my problem and also to share my unpleasant experience with a new Lenovo product.
    Lenovo Thinkpad X1 Carbon
    Model: 20A8A00VSG
    OS: Windows 7 Pro 64bit
    Purchase date: 27th February 2014
    Since the first day I purchased the system, I have been having an issue with my wireless connection:
    1. I am unable to reliably get a wireless connection to wireless access points (e.g. free wifi coffee outlets or malls) and personal mobile hotspots (mobile phone hotspots). It constantly says "LIMITED CONNECTIVITY". In other words, I cannot get internet access. Even when it does connect to the network and get internet access, there is a tendency for the connection to drop back to "LIMITED CONNECTIVITY".
    The only time I can get a reliable connection is when I am connected to my home wireless router. The system does not seem to have problems on home wifi networks. Since the problem seems limited to wireless access points and hotspots, I believe its a hardware/software problem.
    Please note that I have other  wireless devices (laptops and mobile phones) that can connect to the same networks that I am trying to connect to and have no issues.
    I have tested the networks with my friends' wireless devices as well and they have no issues accessing the internet so I am fairly certain that there is no issue with the networks themselves.
    2. I have already called in twice and been given advice on both occasions but the problem still persist. I have updated all drivers, uninstalled and reinstalled and updated the BIOS for the system and also performed a system recovery but nothing has worked so far.
    I have also tried disabling and/or deleting any anti-virus software and firewalls but it does not fix the problem.
    I have also been advised that I need to go down to the Lenovo service center to have my laptop checked out by the technicians and that there MIGHT be a firmware upgrade for the wireless card itself.
    NOTE: MIGHT? The support staff doesn't even know for sure whether there is an upgrade available.
    3. Rebooting my computer, the wireless card or the hotspots does not solve the problem. It might work for a shortwhile before it reverts back to it's non working state or stops working again once I reboot the system.
    I am really unhappy with the purchase so far. It's actually a good laptop per se when all is working, but without internet access, it is pretty much like a dead fish. And thats 90% of the time.
    Like I said, this problem has been happening since day one and I've tolerated it long enough.
    I hope someone can help me with this problem.
    Thanks all.
    UPDATE - 3/24/2014
    I borrowed an ASUS Wireless USB adapter from a friend and installed it on the laptop. Lo and behold there are no connectivity issues to my iPhone wireless hotspot.
    INTEL DUAL BAND WIRELESS AC 7260 - NO CONNECTION/LIMITED ACCESS
    ASUS USB N10 WIRELESS ADAPTOR - CONNECTIVITY AND INTERNET ACCESS
    I think this narrows it down to the software/hardware in the computer....

    Hi, all
    there is an issue bugged driver or even card firmware related. Intel confirmed that. Wait some time for the new release.
    For the test purpose only disable 2,4 ghz band support and switch to 5 ghz. N-band seems unstable so switch to G-band. As the Linux users report the same issue it's firmware bug basically.
    x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
    x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
    Do it well, worse becomes itself
    Русскоязычное Сообщество   English Community   Deutsche Community   Comunidad en Español

  • Macbook air Mini DisplayPort to VGA Adapter connectivity issues

    Hi pple,
    Would like to ask if anyone is facing connectivity issues with Mini DisplayPort to VGA?
    I am currently using the 2nd Gen Macbook Air with Intel HD Graphics 3000 384 MB. Sometimes when I connect to a montior (Viewsonic VA1918wm) it works fine, sometimes it just does not work and the laptop just shows me a blue screen.
    I tried with out with my friend's Mini DisplayPort to VGA adapter, it has the same problem. Does this means that my macbook air mini disoaly port got a problem?
    Thanks
    Bryan

    I am experiencing the same kind of problem... only with projectors. Some projectors will display the screen and then others wont even register with the MacBook Air.
    Using an Apple Min Displayport to VGA adapter. It's hit or miss if it works. Firmware has been updated on the adapter but this did not help.
    Anyone help with this?
    Thanks,
    Nathan.

Maybe you are looking for

  • Internal Error when Exporting to PDF

    Hello all, I have created a report in SSRS 2008. My report was running fine until I inserted an extra row. Once I would insert this row,(no matter where I insert it) whenever I try to view the print layout or export to a PDF I get the following error

  • Saving a Query View

    Hi, In my reports when I am doing a SAVE AS and saving the query view on Favorites, it is saving. But when i hit open and try to open the Saved view it is taking me back to the variable selection screen. Only after entering the variables is it showin

  • Re-installing itunes on my windows PC is no longer possible, why?

    I have an ipod and an ipad. First I lost most of my 14,000 songs when trying to synchronize with a re insatlled version of itunes, now I cannot download itunes at all: the message i get is that installing itunes is not possible due to an error in Win

  • DO NOT DISTURB was in effect.  I couldn't get wi-fi connection until I turned DND off.  Is that a bug or to be expected?

    I just started using DO NOT DISTURB at night but needed to send out an email.  Was surprised that wi-fi had shut off. Couldn't re-connect until I turned DND off.  Then wi-fi connected immediately.  I hope this was just a temporary glitch.

  • How can I transfer or release one of OSX from my Apple ID?

    Hi all, I had a MacBook Air with 10.7.x pre-installed. When I open it, I registered it to my account. Then I bought a new version of MacBook Air and forward my old one to my colleague. For sure I registered the new one's to my Apple ID too. A year la