Drop down list in selection screen.

hello there,
How to get a drop down list box in selection screen and in module pools.
explain also, how to populate some data into that.

*& Report  ZSREE_DROP                                                  *
REPORT  ZSREE_DROP                    .
TABLES : LFA1,EKKO,EKPO.
TYPE-POOLS : VRM.
DATA I1 TYPE I VALUE 0.
DATA  : BEGIN OF WA_LFA1,
        LIFNR TYPE LIFNR,
        NAME1 TYPE NAME1,
        END OF WA_LFA1.
DATA IT_LFA1 LIKE TABLE OF WA_LFA1.
DATA : BEGIN OF WA_EKKO,
       EBELN TYPE EBELN,
       END OF WA_EKKO.
DATA IT_EKKO LIKE TABLE OF WA_EKKO.
DATA : BEGIN OF WA_EKPO,
       EBELP TYPE EBELP,
       END OF WA_EKPO.
DATA IT_EKPO LIKE TABLE OF WA_EKPO.
DATA : BEGIN OF WA_VRM,
       KEY(40) TYPE C,
       TEXT(80) TYPE C,
       END OF WA_VRM.
DATA IT_VRM LIKE TABLE OF WA_VRM.
*&      Module  USER_COMMAND_0100  INPUT
      text
module USER_COMMAND_0100 input.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'PDOC'. "fctcode for first list box
CLEAR IT_EKKO.
SELECT EBELN INTO TABLE IT_EKKO FROM EKKO WHERE LIFNR = LFA1-LIFNR.
CLEAR IT_VRM.
LOOP AT IT_EKKO INTO WA_EKKO.
WA_VRM-KEY = WA_EKKO-EBELN.
   WA_VRM-TEXT = WA_EKKO-EBELN.
   APPEND WA_VRM TO IT_VRM.
CLEAR WA_VRM.
ENDLOOP.
CALL FUNCTION 'VRM_SET_VALUES'
  EXPORTING
    ID                    = 'EKKO-EBELN'
    VALUES                = IT_VRM
EXCEPTIONS
  ID_ILLEGAL_NAME       = 1
  OTHERS                = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WHEN 'PITEM'. "fctcode second listbox
CLEAR IT_EKKO.
SELECT EBELP INTO TABLE IT_EKPO FROM EKPO WHERE EBELN = EKKO-EBELN.
CLEAR IT_VRM.
LOOP AT IT_EKPO INTO WA_EKPO.
WA_VRM-KEY = WA_EKPO-EBELP.
   WA_VRM-TEXT = WA_EKPO-EBELP.
   APPEND WA_VRM TO IT_VRM.
CLEAR WA_VRM.
ENDLOOP.
CALL FUNCTION 'VRM_SET_VALUES'
  EXPORTING
    ID                    = 'EKPO-EBELP'
    VALUES                = IT_VRM
EXCEPTIONS
  ID_ILLEGAL_NAME       = 1
  OTHERS                = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDCASE.
endmodule.                 " USER_COMMAND_0100  INPUT
**&      Module  STATUS_0100  OUTPUT
      text
module STATUS_0100 output.
  SET PF-STATUS 'ZSREE'.
  SET TITLEBAR 'ZSREE'.
endmodule.                 " STATUS_0100  OUTPUT
*&      Module  SELECT_LIST  OUTPUT
      text
module SELECT_LIST output.
CLEAR IT_LFA1.
SELECT LIFNR NAME1 INTO TABLE IT_LFA1 FROM LFA1.
CLEAR IT_VRM.
LOOP AT IT_LFA1 INTO WA_LFA1.
   WA_VRM-KEY = WA_LFA1-LIFNR.
   WA_VRM-TEXT = WA_LFA1-LIFNR.
   APPEND WA_VRM TO IT_VRM.
CLEAR WA_VRM.
ENDLOOP.
CALL FUNCTION 'VRM_SET_VALUES'
  EXPORTING
    id                    = 'LFA1-LIFNR'
    values                = IT_VRM
EXCEPTIONS
  ID_ILLEGAL_NAME       = 1
  OTHERS                = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endmodule.                 " SELECT_LIST  OUTPUT
Bye Murthy

Similar Messages

  • Need a drop down for a selection screen

    HI all,
    I need a drop down for a selection screen.
    say for eg: Field is MARA-MTART   (Material Type). The selection is optional and the dropdown should be using check table: T134
    How to get a dropdown? I think a function module is used , but I dont remember the name.
    Kindly reply.
    Thanks in advance.
    Points will be rewarded

    Hi,
    chk the below code...
    TYPE-POOLS: vrm.
    PARAMETER: pr_spart TYPE spart AS LISTBOX VISIBLE LENGTH 7.
    *AT SELECTION-SCREEN ON VALUE-REQUEST FOR pr_spart.
    INITIALIZATION.
    *----Code for Drop down list....
      DATA: lit_spart_list  TYPE vrm_values, "Table for list of Divisions
              lwa_spart_list TYPE vrm_value,
              lw_name  TYPE vrm_id.            "Name of parameter with list-box.
    *---Assign selected values to table that would be passed to FM VRM_SET_VALUES
      CLEAR : lwa_spart_list,
              lw_name.
    *---Pass required values for list-box display.
      lwa_spart_list-key = 'H'.
      lwa_spart_list-text = 'HL'.
      APPEND lwa_spart_list TO lit_spart_list.
      lwa_spart_list-key = 'S'.
      lwa_spart_list-text = 'SL'.
      APPEND lwa_spart_list TO lit_spart_list.
      lwa_spart_list-key = 'P'.
      lwa_spart_list-text = 'PP'.
      APPEND lwa_spart_list TO lit_spart_list.
      lwa_spart_list-key = 'F'.
      lwa_spart_list-text = 'FR'.
      APPEND lwa_spart_list TO lit_spart_list.
    *Name of parameter to which list is to be assigned
      lw_name = 'PR_SPART'.
      CALL FUNCTION 'VRM_SET_VALUES'
        EXPORTING
          id              = lw_name
          values          = lit_spart_list
        EXCEPTIONS
          id_illegal_name = 1
          OTHERS          = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    Reagrds,
    nagaraj

  • How to add user command to drop down list in output screen for OALV Report

    Hi Experts,
    I have created a report by using OALV.
    in Output screen i have  added drop down for one filed with 2 values.
    when i select  value from the drop down list the  program should trigger and the next field should be update.
    so it is possiable to add a user command for the drop down list in output screen.
    if so please help me .
    Regards,
    Rathan

    HI,
    Check the Demo program BCALV_EDIT_06 with having the DATA_CHANGED event still you can capture the changed data. This event will help you.
    or you can go for this code..
    data: it_f4 type lvc_t_f4,
            wa_f4 type lvc_s_f4.
            wa_f4-FIELDNAME = 'CONNID'.
            wa_f4-REGISTER = 'X'.
            wa_f4-GETBEFORE = 'X'.
            wa_f4-CHNGEAFTER = 'X'.
            append wa_f4 to it_f4.
    "register F4 event
      CALL METHOD g_alv_grid_ref->register_f4_for_fields
        EXPORTING
          it_f4  = it_f4.
    "Once you try to pick the value HANDLE_DATA_CHANGED event will be triggered
    "Definition
         methods:
         handle_data_changed FOR EVENT data_changed OF cl_gui_alv_grid
                                  IMPORTING er_data_changed e_onf4 e_onf4_before e_onf4_after,
    "Implementation
    METHOD handle_data_changed .
        DATA: ls_mod_cells TYPE lvc_s_modi.
        IF e_onf4_before = 'X'.
          MESSAGE 'Data changed before F4' TYPE 'I'.
        ENDIF.
        IF e_onf4 = 'X'.   "if event triggered by F4
          MESSAGE 'Data changed on F4' TYPE 'I'.
        ENDIF.
        IF e_onf4_after = 'X'.
          MESSAGE 'Data changed after F4' TYPE 'I'.
        ENDIF.
       "here you know which cell was modified
        LOOP AT er_data_changed->mt_mod_cells INTO ls_mod_cells.
         "just example test case, here you can implement your code for modified cells
          IF ls_mod_cells-value >=5.
            CALL METHOD er_data_changed->add_protocol_entry
              EXPORTING
                i_msgid     = 'SABAPDOCU'
                i_msgty     = 'E'
                i_msgno     = '888'
                i_msgv1     = 'Only numbers below 5 are possibe'
                i_msgv2     = 'Please correct'
                i_fieldname = ls_mod_cells-fieldname
                i_row_id    = ls_mod_cells-row_id.
            CALL METHOD er_data_changed->modify_cell
              EXPORTING
                i_fieldname = ls_mod_cells-fieldname
                i_row_id    = ls_mod_cells-row_id
                i_value     = space.
          ENDIF.
        ENDLOOP.
      ENDMETHOD.                    "handle_data_changed
    Edited by: sum_it2 on Nov 21, 2011 10:07 AM

  • Drop down box in selection screen

    Hi all,
            I have a requirement in which i need to display a drop down list box for some of the fields in the input selection screen like 1) status to be A) Yes b) No and the 2) Order field  to be A) Not started B) In Progress C) Complete....
      So i need any one of you please  help me out to write the code for the above requirement, hope iam clear in my question and if possible please try give me some example code thanks in advance.

    Hi,
    Check this sample code..
    TYPE-POOLS: vrm.
    PARAMETERS: p_test TYPE char4 AS LISTBOX VISIBLE LENGTH 10.
    DATA: t_data TYPE  vrm_values.
    INITIALIZATION.
      DATA: s_data TYPE vrm_value.
      s_data-key = 'ABCD'.
      s_data-text = 'First four'.
      APPEND s_data TO t_data.
      s_data-key = 'EFGHI'.
      s_data-text = 'Second four'.
      APPEND s_data TO t_data.
      CALL FUNCTION 'VRM_SET_VALUES'
           EXPORTING
                id              = 'P_TEST'
                values          = t_data
           EXCEPTIONS
                id_illegal_name = 1
                OTHERS          = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    START-OF-SELECTION.
    WRITE: / p_test.
    Thanks,
    Naren

  • HT1933 Following the instructions above, I'm constantly redirected to this help page rather than receiving any drop down list to select what my problem is. Are there any other ways to report issues with purchases?

    Following the instructions for reporting an issue with a purchase problem, when selecting "report a probelm", I am not provided with a drop down list, I am redirected to the help page instead.
    Is there any other way to report an issue where the app owner has taken the funds twice for the same product at literally the same time?

    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • How to put drop down box in selection screen

    Hi all,
    I have to create a selection screen.
    in that i have to use a drop down box for the text box.
    how to do that.
    thanking u.
    with regards,
    giri.

    HI
    Check thi ssample code -
    REPORT ZTESTPRG.
    TYPE-POOLS: VRM.
    DATA: NAME TYPE VRM_ID,
    LIST TYPE VRM_VALUES,
    VALUE LIKE LINE OF LIST.
    PARAMETERS: PS_PARM(10) AS LISTBOX VISIBLE LENGTH 10.
    AT SELECTION-SCREEN OUTPUT.
    NAME = 'PS_PARM'.
    VALUE-KEY = '1'.
    VALUE-TEXT = 'LINE 1'.
    APPEND VALUE TO LIST. VALUE-KEY = '2'.
    VALUE-TEXT = 'LINE 2'.
    APPEND VALUE TO LIST.
    CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
    START-OF-SELECTION.
    WRITE: / 'PARAMETER:', PS_PARM.
    Hope this helps.
    OR
    You can use the F4 function module or use a List box
    see the sample codes
    See the following ex:
    TYPES: BEGIN OF TY_MBLNR,
    MBLNR LIKE MKPF-MBLNR,
    END OF TY_MBLNR.
    DATA: IT_MBLNR TYPE STANDARD TABLE OF TY_MBLNR WITH HEADER LINE.
    data: it_ret like ddshretval occurs 0 with header line.
    At selection-screen on value-request for s_mat-low.
    Select MBLNR from mkpf into table it_mblnr.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    DDIC_STRUCTURE = ' '
    RETFIELD = 'MBLNR'
    PVALKEY = ' '
    DYNPPROG = ' '
    DYNPNR = ' '
    DYNPROFIELD = ' '
    STEPL = 0
    WINDOW_TITLE =
    VALUE = ' '
    VALUE_ORG = 'S'
    MULTIPLE_CHOICE = ' '
    DISPLAY = ' '
    CALLBACK_PROGRAM = ' '
    CALLBACK_FORM = ' '
    MARK_TAB =
    IMPORTING
    USER_RESET =
    TABLES
    VALUE_TAB = IT_MBLNR
    FIELD_TAB =
    RETURN_TAB = IT_RET
    DYNPFLD_MAPPING =
    EXCEPTIONS
    PARAMETER_ERROR = 1
    NO_VALUES_FOUND = 2
    OTHERS = 3
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    IF SY-SUBRC = 0.
    read table it_ret index 1.
    move it_ret-fieldval to S_mat-low.
    ENDIF.
    Go through the test program.
    REPORT Ztest_HELP .
    TABLES : MARA.
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    PARAMETERS : P_MATNR(10) TYPE C.
    SELECTION-SCREEN END OF BLOCK B1.
    DATA : BEGIN OF ITAB OCCURS 0,
    MATNR TYPE MATNR,
    END OF ITAB.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_MATNR.
    SELECT MATNR
    FROM MARA
    INTO TABLE ITAB
    UP TO 10 ROWS.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    RETFIELD = 'MATERIAL NUMBER'
    DYNPPROG = SY-REPID
    DYNPNR = SY-DYNNR
    DYNPROFIELD = 'P_MATNR'
    VALUE_ORG = 'S'
    TABLES
    VALUE_TAB = ITAB
    EXCEPTIONS
    PARAMETER_ERROR = 1
    NO_VALUES_FOUND = 2
    OTHERS = 3.
    LIST BOX
    Input : p_char = 'J'.
    Press: enter
    List Box of Month = January, June , July.
    REPORT ZLIST_VALUES.
    TYPE-POOLS vrm.
    tables:
    spfli.
    parameters: p_char type c.
    parameters:
    p_month(12) as listbox visible length 20,
    p_year as listbox visible length 20 .
    DATA:
    t_table TYPE STANDARD TABLE OF vrm_value,
    t_table1 TYPE STANDARD TABLE OF vrm_value,
    vrm_values1 LIKE LINE OF t_table.
    DATA:
    t_year TYPE STANDARD TABLE OF vrm_value.
    data: w_year(4) type n value '2000'.
    at selection-screen output.
    vrm_values1-key = 'a'.
    vrm_values1-text = 'January'.
    APPEND vrm_values1 TO t_table.
    vrm_values1-key = 'p'.
    vrm_values1-text = 'February'.
    APPEND vrm_values1 TO t_table.
    vrm_values1-key = 'q'.
    vrm_values1-text = 'March'.
    APPEND vrm_values1 TO t_table.
    vrm_values1-key = 'r'.
    vrm_values1-text = 'April'.
    APPEND vrm_values1 TO t_table.
    vrm_values1-key = 's'.
    vrm_values1-text = 'May'.
    APPEND vrm_values1 TO t_table.
    vrm_values1-key = 't'.
    vrm_values1-text = 'June'.
    APPEND vrm_values1 TO t_table.
    vrm_values1-key = 'u'.
    vrm_values1-text = 'July'.
    APPEND vrm_values1 TO t_table.
    vrm_values1-key = 'v'.
    vrm_values1-text = 'August'.
    APPEND vrm_values1 TO t_table.
    vrm_values1-key = 'w'.
    vrm_values1-text = 'September'.
    APPEND vrm_values1 TO t_table.
    vrm_values1-key = 'x'.
    vrm_values1-text = 'October'.
    APPEND vrm_values1 TO t_table.
    vrm_values1-key = 'y'.
    vrm_values1-text = 'November'.
    APPEND vrm_values1 TO t_table.
    vrm_values1-key = 'z'.
    vrm_values1-text = 'December'.
    APPEND vrm_values1 TO t_table.
    t_table1[] = t_table.
    delete t_table1 where text+0(1) <> p_char.
    CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
    id = 'p_month'
    values = t_table1
    EXCEPTIONS
    ID_ILLEGAL_NAME = 1
    OTHERS = 2.
    do 10 times.
    add 1 to w_year.
    vrm_values1-key = sy-index.
    vrm_values1-text = w_year.
    APPEND vrm_values1 TO t_year.
    enddo.
    CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
    id = 'p_year'
    values = t_year
    EXCEPTIONS
    ID_ILLEGAL_NAME = 1
    OTHERS = 2.
    start-of-selection.
    write: p_month.

  • Populate drop down in a selection screen

    Hi All,
    I have created a selection screen where i have a drop down field .How do i populate the drop down? In the backend i have a table type in the export param. which contains all the drop downs values.
    Please help.
    Thanks
    tubai.

    Hi,
    If you are using drop down by index. then use following code. Create a context node with cardinality 1:N
    data : it_table type STANDARD TABLE OF sflight.
    DATA lo_nd_cn_drpindex TYPE REF TO if_wd_context_node.
    DATA lo_el_cn_drpindex TYPE REF TO if_wd_context_element.
    DATA ls_cn_drpindex TYPE wd_this->element_cn_drpindex. " Here cn_drpindex is the name of context node which is binded to the drop down by index UI element.
    * navigate from <CONTEXT> to <CN_DRPINDEX> via lead selection
    lo_nd_cn_drpindex = wd_context->get_child_node( name = wd_this->wdctx_cn_drpindex ).
    select carrid from sflight into CORRESPONDING FIELDS OF TABLE it_table.
    lo_nd_cn_drpindex->bind_table( it_table ).
    If you are using drop down by key ui element then you can use the following code
    DATA : node_info TYPE REF TO if_wd_context_node_info.
      DATA : it_zinsp TYPE TABLE OF zinsp.
      FIELD-SYMBOLS : <tablezinsp> TYPE zinsp.
      DATA : value TYPE wdy_key_value,
             value_set TYPE wdy_key_value_table.
      DATA : zlandx TYPE string.
      node_info = wd_context->get_node_info( ).
      node_info = node_info->get_child_node( 'CN_VISATYPE' ).
      CALL METHOD cl_wd_dynamic_tool=>get_table_data
        EXPORTING
          tab_name  = 'ZINSP' " Here ZINSP is name of table
          row_count = 0
        IMPORTING
          data      = it_zinsp.
      LOOP AT it_zinsp ASSIGNING <tablezinsp> .
        value-key = <tablezinsp>-zvisaty." This is field of table
        value-value = <tablezinsp>-zvisaty.
        INSERT value INTO TABLE value_set.
      ENDLOOP.
      node_info->set_attribute_value_set( name = 'CA_VISATYPE' " Name of attribute
                                          value_set = value_set ).
    I hope it helps.
    Regards,
    Rohit

  • Drop down menu in selection screen field

    Hi all,
    my requirement is
    In selection-screen  in one field I have to get drop down menu for 2 values.
    1.     Pvalue.
    2.     Hvalue.
    By default it should pickup Pvalue. 
    can any one guide me how to get the logic for that
    Regards
    cnu

    Just paste this code: u will get idea..
    report YH642_DROP_DOWN_BOX.
    TYPE-POOLS vrm.
    **"Table declarations...................................................
    *TABLES sscrfields.
    *"Table declarations...................................................
    PARAMETERS:
    p_connid(11) AS LISTBOX
    VISIBLE LENGTH 20 default 'FOREX-ANANTH'.
    p_value TYPE i MODIF ID QWR.
    *" Data declarations...................................................
    Work variables *
    DATA:
    w_char(20) TYPE c,
    w_flag TYPE i.
    INITIALIZATION. EVENT *
    INITIALIZATION.
    Internal table to hold delivery header data *
    DATA:
    t_table TYPE
    STANDARD TABLE
    OF vrm_value,
    vrm_values1 LIKE LINE OF t_table.
    vrm_values1-key = 'a'.
    vrm_values1-text = 'sap'.
    APPEND vrm_values1 TO t_table.
    vrm_values1-key = '2'.
    vrm_values1-text = 'testing'.
    APPEND vrm_values1 TO t_table.
    vrm_values1-key = '2'.
    vrm_values1-text = 'java'.
    APPEND vrm_values1 TO t_table.
    vrm_values1-key = '4'.
    vrm_values1-text = '.net'.
    APPEND vrm_values1 TO t_table.
    vrm_values1-key = '5'.
    vrm_values1-text = 'vc++'.
    APPEND vrm_values1 TO t_table.
    vrm_values1-key = 'che'.
    vrm_values1-text = 'chetta-ram'.
    APPEND vrm_values1 TO t_table.
    CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
    id = 'p_connid'
    values = t_table
    EXCEPTIONS
    ID_ILLEGAL_NAME = 1
    OTHERS = 2
    reward points if helpful,
    regards,
    seshu.

  • Limited drop down list in selection criteria in Crystal Report

    I have designed a Crystal Report to produce Item Labels using Crystal Reports for SAP Business One.
    The design has a Dynamic parameter for the selection of Item Code, linked to the OITM table in the database
    The customer database has 5000+ items.
    When I run the report, either in the designer or in the viewer, I get 5 pages of item codes to select from, but they stop at 1000 items.
    Is this a bug with Crystal, or is there some configuration I can change to correct this issue?

    Closed

  • Drop Down List in Query Selection Screen Takes Long Time.

    I open a report, refresh the query and get a selection screen. But when clicked on the drop down list it takes 4- 5 mins for displaying the drop down options.
    How can I speed up the displaying of drop down list in selection screen?
    Could any one please help regarding the setting to enable this?
    Thanks.

    Hi,
    I guess there is a setting to look up the master data tables or use the dimension,which would speed up the time that it takes to display the drop down selections
    Do you have any idea about the setting?
    Thanks.

  • How to make default value in a drop down list

    Hi,
          I have created a drop down list using Selection-Screen code. I have three values in it. I would like to make one of the option as a default value. How to achieve it?
    I am working on module pool program. I have few screens as a part of my program. I have created print button on tool bar of one screen but that print button is appearing on the other screens too. How to avoid it?
    Help would be appreciated...
    Thanks
    Edited by: mohammed ibrahim on Oct 10, 2008 8:43 PM

    1) let drop down box be g_dd.
      if g_dd is initial.
      g_dd = option2.
      endif.
    2)
    by default same pf-status is used by all the screens in the same program
    if sy-dynnr = 'screen_no'. " for screens for which you do not want button to come
    set pf-status 'abc' excluding 'fcode_of_button'
    endif.
    or
    data: git_fcode type sy-ucomm with header line.
    git_fcode = 'fcode_of_button'.
    append git_fcode.
    if sy-dynnr = 'screen_no'. " for screens for which you do not want button to come
    set pf-status excluding git_fcode
    endif.
    Edited by: Amit Gupta on Oct 11, 2008 11:36 AM

  • Create a drop down list that populates based on the selection form another drop down list.

    I need to set up a drop down list that is popualated (i.e. displays a certain list of selctions in the drop down list) based on the choise the form user selects in an adjacent List
    For example
    There are two drop down list field sitting side by side in the form
    1. Select State          2. Select Course
    What I want to do is have a list of states in the first drop down list (1.Select State) and depending on which state the form user selects , the second drop down list (2.Select Course) will populate with a selction of courses available in that selected state only (i.e. it will on;y show course available in QLD if QLD is selcted).
    Is this hard to do?

    Hi,
    I would recommend some posts from Stefan Cameron's blog:
    http://forms.stefcameron.com/2006/09/18/connecting-a-form-to-a-database/
    http://forms.stefcameron.com/2006/09/29/selecting-specific-database-records/
    http://forms.stefcameron.com/2006/12/18/databases-inserting-updating-and-deleting-records/
    http://forms.stefcameron.com/2006/12/07/better-form-design-with-xfa-25/
    Hope that helps,
    Niall

  • How to modify drop down list values of a screen field in UDM_DISPUTE?

    Hi All,
    I have a requirement wherein i need to modify the drop down list for a screen field depending on the value of the other screen field in transaction UDM_DISPUTE. 
    Please suggest how this can be achived.
    Any BADI 's or any other approach is available?
    Thanks in advance,
    Srilakshmi.

    Hi,
    At what time do you want to modify the drop down list, while creating or after creating the dispute case. There are some BADI's where we can change the attribute drop down list values.
    Thanks,
    Sunil

  • Drop down list in Table Control - Value disappeared after pressing ENTER

    Dear Gurus,
    I have a problem in one of my development where I used a table control in which one field is a drop down list.
    I used VRM_SET_VALUES and VRM_GET_VALUES for populating the values from the programand not use any domain level value table for that field.
    My problem is when I select one value from this list , and pressing enter , the value get disappeared. But if I use a domain for this field with value table then everything working properly.
    My doubt is am I doing some miss coding or using the VRM_ function modules improperly ?
    I am sharing some code with you
    in PAI :
    CALL FUNCTION 'VRM_GET_VALUES'
        EXPORTING
          id            = 'ITAB-FIELD3'    "This is drop down list element on screen
        IMPORTING
          values        = values[]    " even it is not the expor parameter...it will work..
       EXCEPTIONS
         id_not_found   = 1
         OTHERS         = 2.
      IF sy-subrc NE 0.
      No sy-subrc check required.
      ENDIF.
    IN PBO
    CALL FUNCTION 'VRM_SET_VALUES'
           EXPORTING
                id     = 'IVBAP-ERNAM'
                values = values[].
    Can you please help me.
    Thanks .

    HI,
    The link contains the list box creation, just check if this might help.
    Re: Getting values back from a listbox.
    Regards and Best wishes.

  • Its urgent please help me( Drop Down list box)

    Hi i am writing th eBDC for VA32 t-code in that screen it is having the dropdown box for the line items i want to select the drop down list in that screen through BDC how we can do this?
    Thanks in advance

    yes but when we are transfering that value it is not accepting
    0     Assigned by the System (Internal)
    1              Delivery date too late
    2     Poor quality
    3              Too expensive
    4     Competitor better
    5     Guarantee
    10            Unreasonable request
    11     Cust.to receive replacement
    50     Transaction is being checked
    the thing is in the drop downbox these text values are coming
    but how can i?

Maybe you are looking for

  • My nano 6th Gen Overheated

    It appears my nano overheated. I used it while running during a hot day (approx. 30min. in about 72-degree weather). It worked fine the whole time outside, but the screen started flickering. It restarted on its own a few times. I connected it to a po

  • Error: Disk Utility can't repair this disk. Back up...

    I have two drives. The main internal drive is giving me this message after I tried to repair it. The external drive that TM backs up to says the volume appears to be ok What do I need to do to restore my system and not lose all my pics, home movies e

  • Puerto Rico implementation-Bank details Infotype

    Folks,             We are implementing Puerto Rico payroll. We are treating all the configuration as part of US. while I was testing employee hire, I noticed in bank details info type the "Bank country key" is defaulted to Puerto Rico I was expecting

  • Color Picture Printing

    Dear Guys We are printing a smartform having employee pictures. Pictures are printing correctly in balck and white but when we use color printer it changes 90 dgree down up. Any solution.

  • Photoshop Elements 8 catalog fails to convert to 11

    I have tried suggestions in this forum without success