Drop out in fade...

using the new fade tool in logic 9 I'm hearing a drop out for a couple of milliseconds exactly where the fade starts anyone have some insight to this.
I had the same problem whilst using pro tools 8 on elastic audio tracks.
but this was a strait guitar .aif file
Any Ideas?

Is there any automation on the track?
Are you adjusting the fade while Logic is playing? I find I need to stop Logic's Transport make adjustments to audio regions and then playback to avoid delays in hearing back the changes?
If you delete the fade and then reapply does it still drop out?
JG

Similar Messages

  • Tracks dropping out after fades

    Hi all!
    Lately I've been experiencing strange behaviour in Logic when mixing orchestral recordings. For instance now I'm mixing 64 tracks of 24 bit 48kHz orchestral stuff. When editing I'mcutting and moving all tracks together to keep timing and making fades to mask the cuts. When playing parts of the music with frequent edits/fades, some/all tracks will drop out immediately after the fade and then play again together with the rest after a while. There's no peaking on any cpu or disk I/O meters, far from it. I can get contious playback over problematic regions by starting just before them in time, but then I will get dropouts later down the timeline.
    Are anybody else seeing this?
    I'm running a 2x2.66 6-core w/32GB ram and all project files are located on a 4 TB striped RAID.
    Best regards,
    Ginge

    Well, I think I've solved the next step...
    I went into the project, and removed alal the effects. I had compression and reverb on just about every track, and a couple of plugins on the master. I switched them all off, and all the parts played. So this now does become a RAM issue, right? And how do I get from where I am now to where I want to be? I guess these are my next steps:
    1. Go through each track and be more judicious in the use of effects.
    2. If that doesn't help, export each track with effects, and drop into the project.
    Any other thoughts? Oh, and thanks once more for helping!
    Mike

  • Pops, Clicks, Drop outs, funky fades and hiccups

    So after a month or so of not working on some tunes, and after having done all the upgrades available, I open a session that used to be fine to discover fades are not working, regions sound bizarre, clicka and pops are now all over the place. It sounds like the tune was mixed by an alien.
    What's up?

    Definitely the funkiest topic title I´ve seen on this forum. It´s got a real nice groove to it.
    /juhani

  • Made a drop down menu. How can I get the drop down to fade in and out? !

    Hi guys!
    I've created a drop down menu (with the help of you legends on here! )...Now I just need it to animate so when the user hovers over the main menu item, the drop down fades in.
    Here's the HTML I have...
        <ul id="nav">
            <li><a href="#">Nav 1</a></li>
            <li><a href="#">Nav 2</a></li>
            <li><a href="#">Nav 3</a>
                <ul>
                    <li><a href="#">&raquo; Sub Menu 1</a></li>
                    <li><a href="#">&raquo; Sub Menu 2</a></li>
                    <li><a href="#">&raquo; Sub Menu 3</a></li>
                    <li><a href="#">&raquo; Sub Menu 4</a></li>
                </ul>
            </li>
            <li><a href="#">Nav 5</a></li>
            <li><a href="#">Nav 6</a></li>
        </ul>
    ...and here's my CSS...
    ul#nav {width:920px; height:35px; list-style:none; padding:0; margin:0; background:url(navBg.jpg) repeat-x; z-index:999;}
    ul#nav li a:hover, #nav li a:active {background:url(navOn.jpg) repeat-x; text-decoration:none;}
    ul#nav li a {color:#E0E2E7; display:inline-block; float:left; margin:0; padding:10px 19px; width:auto; text-decoration:none;}
    * html #nav li {display:inline; float:left; }  /* for IE 6 */
    * + html #nav li {display:inline; float:left; }  /* for IE 7 */
    #nav ul {width:208px; left:-9999em; list-style:none; margin:35px 0; padding:0; position:absolute; z-index:999;}
    #nav li:hover ul {left:auto;}
    #nav li {float:left;}
    #nav li li a {width:190px; background-color:#efefef; color:#2e2e2e; padding:8px; margin:0; }
    #nav li li a:hover {background-color:#000; background-image:none; color:#FFF;}
    #nav li:hover {background:url(assets/images/frame/navOn.jpg);}
    From what I can make out, I assume I need either Javascript or JQuery...
    Does anyone know how I can get the drop down to fade in and out?
    Thank you very much and I hope to hear from you.
    SM

    Yes, you'll need a client-side script to do fade-in/fade-out fx.  Look at jQuery Superfish.
    http://users.tpg.com.au/j_birch/plugins/superfish/#examples
    Nancy O.

  • Creating a drop-out in a clip?

    A coworker asked me a question that I can't answer, so here I am!  He has a clip in his timeline which he'd like to effectively "grey out" for a portion in the middle.  That is, he'd like to create a window in the center where the audio and video drops out temporarily without effecting it's overall length or placement.  He seems to think he saw a way to just drop out a section in the middle, kind of like dragging one of the ends toward the center, but from the inside out.  Anyone hear of this or know how to do it?  It's not important as a practical concern, but I am curious to know if he's right.
    I suggested he set keyframes for the audio level at the in and out points and just drop the sound there, since the clip superimposed above would cover up the video anyway. I also suggested that he copy the layer, cutting off the original at the out point and the new one at the in point, spearating the two to create the window. 
    What sayeth the Adobe User Forum?

    Forgive me if I'm misunderstanding, but if you just want the video and audio to cut out without any fade then using hold keyframes as Dave suggested should work.
    But, if you would like to fade them both out then you can use normal or eased keyframes with a bigger seperation between the two keyframes on either end of the drop out.

  • IMovie sound dropping out

    I imported clips from my students plays. I placed the clip on the timeline. It sounded fine. I placed another clip before it on the timeline. Suddenly the sound on the first clip is missing. You hear the sound fade in with the transition, but when it gets to the actual clip, it drops out completely.
    I have tried rendering the sound. I have updated my quicktime. I am at a loss. Also I lost the tape so I can't re-import the clip (GGrrrrrr!)
    Woe.
    Abigail

    Yes I tried all of that. It was running fine. Until I inserted another clip before it in the time line.
    @Illinois: not just a "plopp", but
    completely missing, as I understood...
    Hi Abigail,
    maybe you have changed incidently the volume of this
    specific clip (the first imported, the last in
    timeline... )
    have you tried to "adjust" the volume of this clip -
    the one without sound?
    have you tried to extract the audio from that clip?
    or, maybe, you've done that before and that specific
    audio track/layer is switched off? (checkbox right
    hand side)?
    we'll make the movie run!!! many knobs and nibbles to
    play with... ooops! that is a little
    misunderstanding in english, right? ;-))))

  • Airport extreme drop out Testra

    Hi - I'm new to this. My iMac G5(intel core duo) uses an airport extreme to access the internet. No probs until I want to make a phone call out whilst on the net - after a short while the airport symbol fades & the internet connections drops out. This only happens on outgoing phone calls, not incoming. Any ideas/help will be very much appreciated. The only other computer joined to this network is a Mac Pro intel core duo.

    gulchy, Welcome to the discussion area!
    My iMac G5(intel core duo)...
    There is no such thing. You either have an iMac G5 OR an iMac Intel Core Duo.
    Are you using a cordless phone? Does it operate at 2.4 GHz? It is causing wireless interference with the wireless network created by the AirPort Extreme base station (AEBS). The best solution is to replace the phone with one that does NOT operate at 2.4 GHz. If you can't do that, try changing the channel used by the AEBS until you find a channel that works or you run out of channels.

  • HELP! Audio Drops Out When Trying to Capture Canon XL2 Footage

    Please help me out here. I'm a freelance camera operator w/ a Canon XL2 and several times now I've gotten calls from the editors saying they're having problems logging my footage, mainly the audio drops out quite a bit, and I'm not talking bout one second for every 2 or 3 minutes. No. It's like every 10 seconds the audio drops in and out.
    What's the deal? Two times the guy was using a Panasonic DVX-100A to capture, another time it was a SONY DSR mini-DV deck. With each incident I had to go over with my XL2 and use it as the capture device, which is a pain.
    The program they're using is FCP HD or 5. But I think even when they just play the tape in their Sony or Pany cameras, the audio may still suck.
    Help me out here, I can't be the only one with this problem.
    Thanks.
    -R

    Well Robert Swanson, I hope my post wasn't taken offensively, it certainly wasn't meant as such. The only Canon camcorder I owned was the GL1. After switching to Sony's I can honestly say it would take something significant to go back. And, I was merely relating my experiences in trying to capture from other Canon camcorders so that I know where you are coming from. However, I am interested in the HVX being the "noisest" camera on the market. I am seriously considering this camera and would be interested in a review that points this out. I would be using the hard drive recorder instead of P2 cards.
    Mike

  • SCCM remote control keeps dropping out when another network adaptor loses connection

    Hey guys,
    Hopefully someone will be able to help me out
    at work, we are running SCCM 2012, and I use SCCM 2012 config manager to manage the clients etc
    We have a particularly annoying issue with SCCM remote control; it constantly drops out when a network connection on the client machine disconnects or changes state, even if its not interface I'm remote controlling through
    Here's an example for you:
    a laptop with a wired, and wireless connection:
    I remote control the machine through the wired network address (lets say 192.168.0.1), but if the wireless connection drops out (someone turns it off or it breaks) the remote control client will kick me off, lock the screen, and I have to wait 20-30 seconds
    before it will accept my connection again
    This happens with any network adaptor that's installed on the client
    Here is a copy of the logs re-creating this issue: https://www.dropbox.com/s/nu4w28d44xky3rg/CmRcService.log
    (I've edited it to take out usernames and IP addresses as they are publicly accessible)
    So my question, does any one know how to fix this issue? I see it uses WMI, is there anyway to get WMI to ignore an interface?
    Thanks heaps,
    Harry

    This is going to be done by design for security reasons. If the network connect for whatever reason is down the pc will automatically be locked.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Remote app wifi drops out constantly

    Hello,
    Just a quick question - When I use the Remote app on my iPhone the wifi drops out all the time. I'll open up the application, it works fine, I change a song, then after 2 or 3 minutes I'll go back to put on a different song and get the Cannot connect to iTunes screen. Also the wifi icon up the top of my iPhone isn't on. I can fix this by going in to Settings > Wifi and it finds the network, then I can go back in to the remote app but obviously this is annoying to do every time I want to change a song.
    I'm not using a router, just created a wireless network for my phone through Aiport on my mac. What turns the wifi connection off after a while if it's not constant in use, is it the computer or iPhone?
    What settings can I change so that this connection is constant? And yes the stay connected setting in the remote app is turned on.
    Thanks for any help : )

    I'm experiencing the same problem. I recently got the latest gen Apple TV. I couldn't believe the instability of the Remote app's connection to the Apple TV.
    Prior to the new ATV, I used a Mini and Front Row and the previous version of the Remote app worked flawlessly. Once connected, I could lock my phone and come back to it periodically and it was always connected in would respond near instantly.
    Now unfortunately, every time I lock the phone the remote app loses the connection and I have to wait for it to find the ATV, restore the connection, load the library. It's maddening. I mean the AirPlay stuff is great but a stable consistent connection is the foundation to everything.

  • Audio dropping out during playback in timeline

    Hey everyone,
    I've dug through these forums and unless I just completely overlooked it I have not found a solution to this issue. I've listed my setup below and then have stated the issue I'm experiencing.
    27-inch, Mid 2011 iMac
    3.4 GHz Intel Core i7
    16GB 1333 MHz DDR3
    AMD Radeon HD 6970 1024MB
    Running Mac OS X Lion 10.7.5 (11G63)
    Currently working off of a portable 1TB G-Technology G-DRIVE via FW800.
    Working in Premiere Pro CS6 Version 6.0.2
    Editing in a sequence with settings:
    1920 x 1080 23.976fps (also tried in a 29.97fps timeline with same issue)
    Working with footage that is 23.98fps
    Working with a combination of ProRes 422 (LT) and native H.264 Quicktime files strait from a 5D Mark 3.
    The issue I'm having is during playback the audio will competely drop out. The video will continue playing on just fine but the audio drops completely out. All audio levels drop as well in the audio mixer meters so it truly is losing all communication with my audio layers in the timeline.
    I read in other forums to go into Finder and delete out the .caf files, re open Premiere Pro, wait for them to be recreated then carry on. I tried this approach with no luck. Deleting the .caf did not change anything. Audio is still dropping out as I try to play through my timeline. The only way to get the audio back is to pause then press play again. I have 5 total channels of audio with only 2 of those channel active.
    Any ideas on what is happening would be greatly appreciated. This is incredibly frustrating have to export out a video just to be able to watch it through.

    Having this annoying problem also.  Using the Space Bar to play timeline it takes pressing and holding to a count of three or trying press play three time in a row using the space bar to get ungarbled audio, or any audio at all in a normal uncomplicated sequence on the timeline.
    Really annoying.  Audio used to be so simple and untaxing to a sequence.
    Adobe Premiere Pro CC 2014.1 release
    8.1.0(81) Build
    OSX 10.8.4
    40 GB RAM
    G Raid G Speed Q w/ ESATA connection
    1920x1080 29.97 Progressive Scan Sequence
    48Khz
    Apple PRoRes 422
    12 channels of audio/ only 2 of 12 monitored.
    1/2 resolution on Program monitor
    ADOBE.....WISH THERE WAS A SOLUTION?

  • Internet Connection Sporadically Drops Out

    This problem has been ongoing for several months now.  Usually one or more times a day the internet connection will drop out, usually for a few minutes at a time.  Sometimes I get the yellow triangle in the taskbar, other times I don't.  I've gone back and forth with customer service several times.  Earlier this week they replaced my router to no avail.  They now tell me there are no connection drops or errors in the event logs and have tried to blame my computer/NIC.  I explained to them that it's not the connection between my NIC and the router that is breaking, but rather the connection between the router and the internet, or the connection between the router and the FiOS box.  Either way it's on the other side of the router.  I don't know why it doesn't show up in the event logs, but it is just about a daily occurrence.  So far the haven't even offered to sent a tech out.  I've gone back and forth like four or five times now, and I know the customer service reps are just trying to help, but so far it hasn't done any good.  The issue obviously needs to be escalated, so I figured I'd try here first.  Does anyone have any ideas on what the problem might be?  Has anyone else ever experienced this problem and been told there's no flags or errors in the event logs?  Thank you for your help.

    Hi Munich2013,
    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

  • As Requested New Thread DSL low speeds and drop outs ref: Anthorny Verizon.

    Please see post by Jerrold concerning the form for information requested, I have never been able to fill this out. Note also I had to sign in three times just to access your private letter to me today.
    Here is a summary of problem:
    When my line was first installed line speed was always between 9 to 12 Mps, which is fine for a 15 Mps line, sometimes would even go higher, so line was ok.
    In October 2012 my line speed dropped to about 5 to 7 Mps, I contacted support and repairs were attemped, but did not correct the problem in fact problem became worst.  My line speed dropped to about 2 to 3 Mps.
    Now from October to end of November, all repairs did not correct problem.  I was told by chat tech support that the problem was being worked on and there was an open ticket.
    In December my line speed returned to normal speed was between 9 to about 13 Mps.  No one had contacted me about this so I again contacted chat tech support who said my line had been fixed and there were no open tickets so have a nice day.  I accepted this at face value and accepted that my line was now ok.
    In January 2013, My line speed dropped again to 2 to 3 Mps.  I contacted chat tech support who tested line and put in a repair request.  No one had responded back to me and a week later my line started to drop in and out losing the connection completely.  I again contacted tech support who told me they had no open tickets on my account, they tested line and while we were talking on voice connection my phone started to have heavy static, both my DSL and Phone dropped out at that point.  Tech support called me back and said he was putting a repair request and that my line had problems. That night Tuesday January 29 my Phone and DSL both died, no dial tone on phone and DSL showed only power light on.  Contacted tech support by a friends cell phone and informed them of this, was told ok it would be fixed by open ticket for next day.
    Repair was to be made on Wednesday January 30, no one showed up, called tech support and told repair would be made on Thursday.  Thursday late repair person showed up around 4:30 or 5:00pm, landlord gave access to building.  I did not know they were here at all, when he told me( my landlord) I tested my DSL and found it running at 1.7 Mps or below that.  When I attempted to call tech support found my phone was still dead, no dial tone at all.  Contacted chat tech support who told me ticket was still open and would be fixed by Friday, or Monday.
    On Monday, phone still dead, DSL running at 1.7 Mps contacted chat support who had me take a phone to the junction box outside of building, plugged in two phones to this no dial tone at junction box (both phones work ok checked using a neighbors phone jack)  should note that on the outside of building there are two junction boxes, but one has lock on it so could not use that one.  Anyway told that DSL could not be fixed until phone is repaired.  Tried contacting phone repair and all I get is auto wait then line drops using a neighbors phone and pay phone my is dead.
    Tuesday again contacted chat support now told to bad, until phone is fixed cannot help me ( was'nt that suppose to be done in first repair, fix phone and DSL given both were reported dead).
    So why am I upset well look at history I now sit with No Phone service, DSL running way below what I pay for and a tech support who has said to bad not our problem.  I also do not want to hear that my line does not and cannot support the speed I pay for ( it has shown to support that speed at beginning of install up to October and again in December).
    Well anyway your letter did not say where to start new thread should I do that here, or in open forum?
    Oh, auto phone repair has given me a date for phone service as this Friday, I hope that at least gets done I cannot contact them any other way it seems.
    You may also ref: my thread on ping rates over 600 on long distants calls for any other history, but as per your request here is new thread.  Please note as of today I have No Phone so can only be contacted by email or here.  Untill phone is repaired that's all there is.

    Please go to your profile page for the forum by clicking on your name, and look in the middle towards the bottom where you will find an area titled "My Private Support Cases".
    There you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

  • Airport Extreme dropping out and can't connect PC anymore

    Hello
    Suddenly, a couple of weeks ago, my internet connection dropped in the middle of surfing. I couldn't reconnect, Airport was only seeing the base station spasmodically and when I did try to connect I was being asked for a password which wasn't recognised. Hours later I called the support line and was advised to do a hard reset which I did, new name, same password. Now I'm reconnected most of the time, but it has dropped out a few times and the signal seems generally weaker. Something's not right.
    I had not at that point done the July 1st update so it's not to do with that. I haven't a clue why it suddenly started playing up so strangely. (Though I have noticed a new unsecured wireless network in range and wondered if someone was 'hacking')
    My main problem is that my business partner, who connects through a pc here (who remained connected incidentally when I first lost the connection) and continued to be able to connect until I did the hard reset. Now I can't connect that pc to the airport extreme. It sees it but gives an error message saying it's out of range and refresh the list when I try to connect. I fiddled about for hours. I've forgotten how the pc was set up in the first place and I'm going nuts. Can anyone help.
    Thanks
    Helen

    Disappointed not to see any help on this one.
    If it helps anyone out there to help me, I just uploaded the Airport Utility Software to the pc, typed in base station ID and password. Error message, check network connections. No help.
    Try to connect the pc again the usual way from the list of available networks, it asks for password, I use it, then it says it needs to be 5 or 10 ASCII characters or 20 hexadecimal.
    What I don't understand is that everything was working fine on both machines until two weeks ago when my base station went into spasm, dropped me but happy with pc, when I did the hard reset, keeps me, won't allow pc to connect.
    I just don't know what to do now. Of course I suppose I could always make a call and pay £35 to have an apple technician tell me why their hardware suddenly screwed up for no apparent reason.
    Seriously frustrated
    Anyone?

  • BT Infinity Hub 3 slow to load pages and drops out...

    Hi can anyone help, I have had Infinity option2 for less than a month and it has not work properly since it was installed,
    done all the around the houses with help from India and they have thanked me for my patience and acknowledge there
    is a fault which they say they have fixed, but it's getting worse.
    When I do a speed test I get 36Mb down and 8Mb up, great but when I am loading websites they usually take a long time to load and frequently drop out, when I hit the diagnose connection they usually load. I also cannot send or sometimes receive email from my accounts, with server error fault messages also my webcam does not work I can here them but they cannot here me, never had these problems with my previous ISP on only 8Mb.
    Thank you, getting desperate now!

    Mate, I feel your pity as, although I've only had Infinity for 4 days, I'm having the exact same problem and NEVER had this issue in the 4 years I was on BT Total Broadband.  To summarise:
    Day 1 - Everything worked perfectly
    Day 2 - Internet would not load one single page
    Day 3 - Working perfectly again
    Day 4 - Most pages load, albeit VERY slow
    BT India have told me that I have a fault in my line and an engineer will call me back in the next 24/48 hours.  Apparently I was the first person on my cabinet to have Infinity installed so I'm guessing I'm the guinea pig!!!
    You won't get to ride the racehorse...until you've ridden the mule.... - RogerB 13/04/2010

Maybe you are looking for