DSL outage after 7pm in 90066 for a week

Any ideas what's going on? Anyone else experiencing this? I'm not wasting my time with tech support, almost ready to pay the extra $$ and go with cable.

HI-- I'm not in Florida and just got DSL a few weeks ago---I get putages ALL the time.  Customer support was or said they need to send someone out here to "correct " the problem and unfortunately that doesn't work for me-- I never bother to call them when it goes down-- which is alot-- pretty completely unreliable (I should have read more threads) because I don't feel like having someone come out-- and when it works it works great-- but I haven't had the confidence to cancel my dial up yet and this is now going to start really pissing me off-- because why should I have to pay 2 ISP's?  It's obviously a verizon is aware of and really don't care about it and looking at some of the posts --maybe getting worse.  I could go the cable route-- because if their DSL is unreliable, I wouldn't want to try their FIOS -- you know, if they don't want to provide service to the DSL guys.  Sounds to me like customer service isn't helpful in this department, but I will say on a postive note that both of the reps that I have dealt with have been really nice and helpful and patient.....but I don't have time to be sitting on the phone dealing with a rep. ( from the posts I've read -- it doesn't seem to be user problem and seems like a waste of time)   I need my computer and I need it on line-- I would like to be able to cancel my dial up service.  This was supposed to be saving me money, not costing me more.  I know that if this problem persists and I have to go to cable, I'll dump my landline too.  Anyway to all of us poor DSL users with for some reason are having connection problems---we want you guys to  correct it.  My words on DSL...LOVE IT..when it works!  Thanks for the venting--it's a frustrating problem.

Similar Messages

  • Iphoto won't fully open after computer being off for two weeks.

    After being gone for two weeks I came back home, turned on my computer and tried to load some pictures I had taken into IPhoto.  I opened the program but in only partially opened and all I get is the spinning pinwheel.  After waiting several minutes for the program to finish loading I finally had to force quit it.  After several attempts I gave up.  I've downloaded all updates and don't know what else to do.  I'm wondering if the most recent update is for Lion and I'm still running Snow Leopard.  Could that be the problem.  I've sent the reports to Apple but of course won't receive any response.  Any help would be greatly appreciated.

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • IPod Touch sreen stops working after getting wet. After, work again normally for two weeks. Now, sometimes work, sometimes don't. Any clues?

    My iPod took a bit of rain when i'm cooming home. After that, the touch stops responding. I tried restart and everything, but I only get to destroy the iOS. After, I put the iPod under the notebook in order to try to dry him with the heat. The touch work again! I restored the iOS and everything goes fine for two weeks. Yesterday, I plug the iPod for use the iTunes and he wasn't recognized by the iTunes, and the touch stops working again. I restored again the iTunes start to recognize him, but the touch works for a little bit and stop again. I put it under the note and the touch works for time enough for me to turn off the iPod. Anybody has any ideia what is going on? Thanks.
    PS.: Sorry about my terrible english. Is not my mother langage.

    Malarauco wrote:
    Thanks guys, I shut the thing off and left in a bowl with uncooked rice, in found several tips on the net saying that this might help absorve the wet, also this don't seem capable of creating damage to me. I think I will left the iPod in the bowl for three days before turning it on again, that seems ok?
    7 to 10 days is better, and the failure rate is very high, you may need a new iPod.

  • HT3743 Iphone 4 unlocked by at&t i did a restore from itunes and get an error message "your request cannot be processed please try again after sometime" I tried for a week now but same problem, please advice

    I have Iphone4 brought from at&t USA(carrier locked) and i am in india now, i contacted at&t and requested for an unlock for me to use with indian carriers.
    I got an email confirming the unlock has been completed from at&t and asked me to connect the device to itunes and do a back&restore, after the restore process i get an error message on itunes "your request cannot be processed, please try again after sometime" i tried it with my airtel sim card and also at&t sim card but did not work. I contacted at&t and they confirmed that the unlock request was successful but i still get the same error.
    Please kindly help me if i need to do someting to be able to activate and unlock my iphone4

    Excuse me. I am on a contract with O2 with an iphone 4s, suddenly xmas day it said "no service", took it to o2 who sent it to apple factory who refused to repair it because a screw missing.  I wouldnt know have never opened phone in my life,wouldnt know how to, then went direct to Apple Regent St London who also said "screw missing, warrenty void, then produced a phone just out of contract due to upgrade,a vodaphone carrier 3gs, it was unlocked but then told by apple the owner had to go to vodaphone and get it unlocked on their books which could take up to 48 hours, it is now 72 hours later and i have the same error despite backing up old phone with i tunes and i cloud,am very angry and am paying alot for a contract every month, all i can see is "no service and waiting for activation" and all ths started when I upgraded to IOS 6.Am extremely upset and still under warranty but no one seems to want to help me to connect to WiFI, i cannot keep going to Apple Regent Street at lunchtime and be shooed of with excuses, this replacement phone 3gs should work and it doesnt.  Am extremely annoyed with the info i have been provded wth by Apple staff.Now I havent had  a phone since 25th december.

  • Does anyone elses iPhone 5 just randomly shut off or freeze on a blue screen after only having it for a week??

    I got a white 16G iPhone 5 last Sunday (Jan 6th 2013) and I have already been on the phone with apple once and in the store twice about this issue. The phone randomly shuts itself off or freezes on a blue screen for 5-30 minutes at a time. Apple reset my phone thinking that would fix the issue, it didnt. I went into the Sherway location while it was frozen and they told me i couldnt get an appointment until tomorrow so ill have to wait... I'm hoping that they just gave me a dud of a phone and that when i go back in tomorrow they will just give me a new phone because this is getting ridiculous. if this problem continues once they finally give me a new one than i suggest that no one else buys the iPhone 5. I had the 4 and had only one problem in a year and a half, and i've had more in one week with this model. Let me know if anyone else is experiencing this too or if my phone is just a dud.

    First I would try restoring from your backup. If that does not work I would restore to factory-new condition and manually add apps and other things back on since there may be something corrupted in your backup.

  • My iMac (With Mountain Lion) Freezes After Leaving It On For 1 Week

    This isn't the first time this has happened, I started to recently pay attention to the amount of days my machine is on and now see it's approx. 7 to 8 days then it will just lock up and freeze, can't click or do anything.
    Then I'm forced to power it down.
    I won't browse or anything, I have no 3rd party plugins, I haven't tweaked anything, I keep it dead simple, which has me confused on what to do now.

    Yea, that really doesn't help when I already stated everything I do is normal.
    I did state that my machine has no kind of 3rd party software that runs when this happens.
    I don't tweak my computer ( modifying it, etc )
    I keep everything simple to the way it was ( so simple that I even use the Aqua wallpaper & Flurry screensaver lol )
    I did run Disk Utility and tend to atleast once a month just to check if things are running ok.
    So again, all is normal with what I run and throughout the time before this happens, everything runs smoothly with no hiccups.

  • List of dates for a week

    Hi,
    i´m looking for a way to get the list of dates for a specific week.
    i.e.
    Week 41.2007 returns
    08.10.2007
    09.10.2007
    10.10.2007
    14.10.2007
    Any suggestions how to do this?

    that all depends on your definition of a calendar.
    does the 1st week of the year start on Jan 01? or
    does it start on the sunday of the week (sun-sat)
    that contains Jan 01? or do you use a mon-sun
    calendar instead?I didn't think it depends on the definition of the calender since weeks run indepenant from the calender year. However we are talking about a calender week. There is an iso-definition for it, which is also implemented by Oracle.
    Week number
    Weeks in a Gregorian calendar year can be numbered for each year. This style of numbering is commonly used (for example, by businesses) in some European and Asian countries, but rare elsewhere.
    Straight from Wikipedia:http://en.wikipedia.org/wiki/Week#Weeks_and_the_calendar_year
    ISO 8601 includes the ISO week date system, a numbering system for weeks; each week is associated with the year in which Thursday occurs (so that if a year starts in a long weekend Friday–Sunday, week one of the year will start after that). Thus, for example, week 1 of 2004 (2004W01) ran from Monday 29 December 2003 to Sunday, 4 January 2004. The highest week number in a year may be 52 or 53.
    The numbering system in different countries may deviate from the international ISO standard. There are at least six possibilities[2] [3]...
    >
    so, as per the OPs question, my solution is perfect.No it was not. But mine was neither. OP gave the example for 2007 but never said it will always be this year. Just like OP gave example of 41 as the week.
    -snip-
    so the 7 days would then be:
    trunc( to_date('01-jan-'|| any_year, 'dd-mon-yyyy'),
    'D' ) + ( week_num-1 )*7This is much better than my version!

  • Verizon DSL drops out intermitte​ntly: problems for 10 months

    Subject: Verizon DSL drops out intermittently:  problems for 10 months
    Hi all,
    Just wondering if any one can help.  We had Verizon DSL on our home phone line for six years in Worcester MA.  The first five years we had little to problems.  The last 10 months we’ve have frequent (nearly every day drop out and period where the DSL line can’t connect for minutes to sometimes hours).
    We’ve had seven different technicians visit us for a total of thirteen visits.  They’ve replaced the line coming into our house multiple times and isolated our home phone lines from the DSL feed but this hasn’t helped. Verizon tech support can’t seem to get back to me with a detailed plan of what they are going to do next and few representatives return my phone calls.
    We’ve also tried at least five router and modems and it hadn’t helped.  They recently changed the DSL card(?) in the local office (~7000 ft away) and said they switched us to ADS2.
    We’re still seeing internet drops and we’re at our wit’s end.
    Any ideas?
     Here’s our transceiver stats from our Verzion 7500 DSL modem combo:
    Transceiver Revision     A2pB020b3.d20h
    Vendor ID Code          4D54
    Line Mode                   ADSL_2plus
    Data Path                     FAST
    Transceiver Information            Down Stream Path       Up Stream Path
    DSL Speed (Kbits/Sec)            3358                            863
    Margin (dB)                             9.2                               7.0
    Line Attenuation (dB)               44.0                             19.4
    Transmit Power (dBm)21.0                             12.4
    Thanks,

    Well, we're getting pretty fed up.  Here's the letter that we are sending out for a Verizon Presidential Appeal...
    To:
     Verizon, St. Petersburg, FL
    Verizon Technical Team, Worcester, MA
    The Department of Telecommunications and Cable, Consumer Division, Boston, MA
    Better Business Bureau
    Dear Sirs,
    We are writing to lodge a formal complaint about our Verizon DSL service, and the extremely
    poor treatment we have received while trying to resolve this (still unresolved) problem. We have had
    intermittent internet outages for the last 12 months. This followed five years of normal DSL service at
    the same address. Our problems worsened this spring; our internet is out a few minutes to several
    hours a day, most days a week. Our next door neighbors have the same problem with their Verizon
    DSL service, though they do not use the internet very often so are less affected than we are. We rely
    on consistent internet service for our jobs.
    We have had 13 technician visits to our home from a total of seven different technicians. On
    multiple occasions, we have also been stood up for scheduled technician visits, including days in
    which we took off work to be home. Two of these times in which we were stood up were not visits that
    Verizon initiated, where we were told we needed to be home. Additionally, we have received
    several “auto-calls” informing us that our problem is fixed and our work tickets have been closed. This
    is extremely upsetting to us, as our problem has never been fixed as we have explained many times.
    Several technicians have spoke confidently (and condescendingly) that their work would fix our
    problem; these are generally the technicians we never saw again.
    It is clear from our several calls each month to Verizon that persons and departments within
    the company do not communicate with one another. Time and time again, we have been shuffled from
    person to person, and now believe that no one wants to expend the effort to deal with our problems.
    For example, multiple employees have failed to call us back when they said they would. We have
    asked several times for a team of creative thinkers (with the authority to act) to brainstorm some sort
    of solution and let us know what Verizon was doing to solve our problem. This has not happened. We
    have made extensive notes about our service interruptions and our correspondence with Verizon over
    the last several months; these are included in this packet. We also have multiple videos across several
    months showing that DSL signal is not available.
    We believe that a new line needs to be put in from the local hub to our house, a distance of
    only a few blocks. (See notes on reverse of page.) At this point, we have no faith that Verizon is
    willing to fix this problem and restore service to us. This is truly a shameful way to do business.
    If Verizon is unwilling to restore our DSL service to acceptable levels, we would like Verizon to
    Notes: This is what Verizon has told us they have done:
    1. Isolated our phone line from DSL.
    2. Replaced the line from our street to our home.
    3. Switched the F2.
    4. Put us on an A-DSL2 card at the local hub.
    We have tried seven DSL modems and six routers without success. The problem is not within
    our house; that is clear. We believe a new F1 line is needed. We were even told by a company
    representative on the phone “well, DSL is on copper wire…” - basically from our view, an admission
    that copper wire can go bad, and that this may be the cause of our problems. We have asked for a
    new F1 line to be installed several times and been brushed off each time.

  • Computer dsl connection after router hookup

    I am very confused.  Have a home computer with dsl connection.  I went thru the CD directions and hooked up my wireless router.  Everything seemed fine, but when I went to go to the internet (aol mail, etc.) my dsl connection was gone.  I lost my dsl connection.  Couldn't get ANY help at the 800 tech support.  So i unplugged the router wires and put everything back the way it was.  Then I could get dsl connection, and went to the online website 24-hour support.  Told them everything that happened, and all I got was "I am sorry for the inconvenience", then silence.
    Why do I lose my regular dsl connection after I hook up the wireless router???  Am i doing something wrong?  HELP!

    Hey try resetting the router reset button in such a way that power
    light is blinking on the router & then do a complete network power
    cycle i.e., unplug the power cables from the modem & from the router &
    then plug in the power cable to the modem first once all the lights are
    solid green you could plug in the power cable to the router & check out
    it will definately work!!
    Configuration for DSL connection:-
    Before doing the following steps, you have to connect the modem to the
    router's Internet Port and the computer to the Ethernet Port Number 1.
    1. Press and hold the reset button for 30 seconds.
    2. Then, unplug the power keep holding down the reset button for
    another 30 Seconds.
    3. Plug back the power back in, and keep holding down the reset button
    for 30 Seconds.
    4. Release the reset button.
    ===================================================================
     Access the setup page of the router by launching an
    Browser and type on the address bar, 192.168.1.1 and press enter. When
    it prompts for the username and password, leave the username field
    empty and provide password as "admin" (Without quotes)
    click on ok.
    On the main setup page the ""Internet Connection Type"" should be
    on ""Obtain IP Automatically - DHCP “. Click on the Save Settings
    button.
    Now click on the sub tab ""MAC address clone"".
    - Click on enable
    Click Clone & click save settings
    Check WAN Ip on Status page of router ....
    If getting Valid Ip .... try going online
    If you are getting Ip - 192.168.1.X ...change the LAN Ip to 192.168.2.1 ....Power cycle for 3-4 minutes ...
    Try going online
    If still not working ...use Internet Connection type as PPPOE .... Use Username & Password provided by Service Provider ....
    Click save settings....
    Look for WAN IP address again under status page ...

  • Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding.

    Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding. However when I close Nunit, the page is back to be normal. The title is returned to the name of website without "not responding". I sure this problem did not happen on Firefox version 26. I just got this problem when firefox upgrading automatically to version 27. Please help me fix this problem because it is very important for my work. If you need more information pls send your concerns via my email address.
    Thanks so much

    Hi, the work around suggested above should put you in working mode in the meantime. However to help investigate the issue it is possible to analyze what is not loading or taking a long time by analyzing the network traffic or http headers of the Nunit web page.
    *[https://addons.mozilla.org/en-us/firefox/addon/live-http-headers/]
    *Web developer Tools > Web console
    If you post the results with out the user data, we are happy to help.

  • I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.

    I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.
    I am running Mac OSX 10.4.11. According to the System profiler the CD/DVD drive is a "PioneerDVD-RWDVR-112D." When I compare the information under this heading, the only unusual difference from my iMac is that the G5 reads "Burn Support: Yes (Unsupported)." My iMac reads "Burn Support: Yes (Apple Shipping Drive)."
    Under the System Preferences the options are set to "Ask what to do" when a blank CD or DVD is inserted. Music CD set to open iTunes, Picture CD set to open iPhoto, Video DVD set to open DVD player.
    Do you have any suggestions?
    Thanks, Jack

    Hi Jack, great help so far!
    Internal...
    http://eshop.macsales.com/static_pages/Framework.cfm?page=superdrive/sdl_powerma c_g5.html
    External be sure it's Firewire & not Bus powered...
    http://eshop.macsales.com/shop/firewire/optical-drives/

  • My itunes can't see my iphone 4 after i make ubdat for iphone and itunes also ?

    my itunes can't see my iphone 4 after i make ubdat for iphone and itunes also ?

    Hi there 3eboo,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

  • How to execute Update Module FM after final commit work for a T-code.

    Hello Folks,
    I have a bit complex issue with my current object.
    We have modified MM41/MM42 transactions and added a subscreen to fulfill the requirement.
    We have designed the subscreen and embedded the same to MM41/MM42 through SPRO configuration.
    Now for update business logic,i am trying to execute one Function module(Update Module) in update Task...so that it will be executed once after the final commit work will be done for MM41/MM42.
    But its not executing.
    To fulfill my requirement i need to execute the FM only after Final Commit work for MM41/MM42.
    Please suggest in this regard.
    Even i can see few BADI's which are triggering through MM01/MM02 but not through MM41/MM42.
    BADI_ARTICLE_REF_RT
    BADI_MATERIAL_CHECK
    BADI_MAT_F_SPEC_SEL
    Code with which i am trying is given below.
    After PAI event of the subscreen---
    1:        MODULE USER_COMMAND_9001.
    2:       MODULE user_command_9001 INPUT.
                        PERFORM sub_save_mara ON COMMIT.
              ENDMODULE.
    3:       FORM sub_save_mara.
                         CALL FUNCTION 'ZMMUPDATE_MARA_APPEND_STRUCT' "IN UPDATE TASK
                                        EXPORTING
                                                 materialno = gv_matnr
                                                 appendmara = ty_zzmara.
             ENDFORM.                    "sub_save_mara
    4:                FUNCTION zmmupdate_mara_append_struct.
                      ""Update Function Module:
                       ""Local Interface:
                      *"  IMPORTING
                   *"     VALUE(MATERIALNO) TYPE  MATNR
                   *"     VALUE(APPENDMARA) TYPE  ZZMARA
    Data Declaration for Local use
      DATA : w_mara TYPE mara.
    Selecting the latest values for the material.
      SELECT SINGLE * FROM mara INTO w_mara WHERE matnr = materialno.
      IF sy-subrc = 0.
      Move the ZZMARA values to structure MARA
        MOVE-CORRESPONDING appendmara TO w_mara.
      Update the values in table MARA.
        MODIFY mara FROM w_mara.
      ENDIF.
    ENDFUNCTION.
    Kindly suggest.Thanks in advance.
    Regards
    Ansumesh

    Hi..
    The code given by me will work fine provided the Final commit should happen.
    Because to execute FM with update task,final commit work should happen which is mandatory and after that it will call the update task.
    In my case final commit work was not happeneing because..SAP standard program was not able to detect wether there is any change in my sub-screen or not as the standard program & my custom program,subscreens are different.
    As it was not able to detect the change,so final commit was not happening and hence update task also.
    To provide the reference of change in my subscreen to standard program ,i set a flag as per the change in the subscreen
    And exported the same to memory.
    Then Implemented one enhacement spot in MATERIAL_CHANGE_CHECK_RETAIL Fm where i have Imported the flag value.
    Based on my custom flag value,i have set one standard flag FLG_AENDERUNG_GES which tells SAP standard program for MM42 wether any change has happened or not.
    The above solved my purpose.
    Regards
    Ansumesh

  • Aperture 3 shuts down every time I try to use it after only using it for one minute. Aperture closes then a pop up screen asks if I want to reopen Aperture. If somrone at Aperture didn't keep pushing a stop button for it to close,it wouldn't need to ask t

    Aperture 3 shuts down every time I try to use it after only using it for one minute. Aperture closes then a pop up screen asks if I want to reopen Aperture. If somrone at Aperture didn't keep pushing a stop button for it to close,Apple wouldn't need to ask the stupid question"Do you want to reopen Aperture?" to begin with. Anyone out there having the same annoying problem?? I like Aperture or used to anyway,but if this nonsense continues, I will be forced to buy some other editor besides "No hanging fruit - Adobe photoshop CS5" or "I don't like you so I'm shutting down - Aperture".

    Hello,
    sorry to hear about your troubles, but we will need to have more technical information about your problem to be able to help you:
    There may be several reasons that can cause Aperture to crash on start up:
    You may have imported an image (or video) in an encoding that Aperture does not support, or that is larger than 2 GB, or that is corrupted and Aperture cannot process it
    Your Aperture Library or Preferences may have been corrupted
    Or you are having a system wide problem with your machine.
    Or you may simple be running out of disk space.
    It would help, if you could post the crash log from your last crash. Also, more details on your Aperture Library: Is it managed or references? how large is it? Is it on your system drive or on an external drive?
    What have you done, shortly before the trouble started? Have you imported new images or videos? Did you install any plug-ins or any new software, lile Final Cut?
    Try, if you can get Aperture to launch, if you defer the generation of Previews: Hold down the SHIFT-key immediately after you start Aperture to prevent preview generation for that session. If a damaged image in your library is preventing normal opening, this may allow you to start Aperture. If this succeeds, try to identify the broken image or video among the images you recently imported and remove it from the library.
    Regards
    Léonie
    Don't you think your user name is a little bit tactless in an Apple provided forum?

  • After using PS CS6 for well over a year, Bridge now will not open RAW images in Camera Raw, although

    After using PS CS6 for well over a year, Bridge now will not open RAW images in Camera Raw, although Photoshop does. When I try to open them in Bridge, I receive a popup message that says that it "requires that a qualifying product has been launched at least once to enable this feature." Obviously, I have done so hundreds of times since installing and activating CS6. What gives, and how do I fix it?

    Things have now become significantly worse!
    Now when I try to open anything from Bridge, or try to open PhotoShop at all, I receive a popup that gives me 2 options: 1) License PS CC, or 2) continue with my trial of PS CC.
    So far as I know, I have not downloaded any trial of anything from Adobe in many months. In fact, I have no interest in PS CC. I wish simply to use PS CS6.
    I have uninstalled my Adobe Creative Suite 6 Design Standard, of which my PS CS is a part, and reinstalled it but I still am blocked from using my properly licensed programs.
    Please advise.
    Mike Hannisian

Maybe you are looking for