DSL technology and layer of operation

Pl inform about DSL technology operation and at which layer this technology and kind of DSL, I have no knowledge about DSL.

Hello,
have a look at the article below:
How DSL Works
http://computer.howstuffworks.com/dsl.htm
Regards,
GP

Similar Messages

  • PSE 9 install fails during Shared Technologies and rolls back

    I've bought and am getting fed up with trying and failing to install PSE9.
    It fails during the install of 'Shared Technologies and rolls back.
    I've unpacked the logs as per instructions and the error messages at the end are:
    - 0 fatal error(s), 5 error(s), 3 warning(s)
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    ERROR: The following payload errors were found during install:
    ERROR:  - Elements Camera Raw: Install failed
    ERROR:  - AdobeHelp: Install failed
    ERROR:  - ElementsSTIInstaller: Install failed
    ERROR:  - Adobe ExtendScript Toolkit CS5: Install failed
    I've looked through the forums for possible causes:
    1) Adobe Bridge process running in background - according to task manager, the only Adobe process running relates to Flash
    2) Path problems - I've moved the install files and re-extracted them to a folder in C: with the same results.
    I then tried installing the loganalyser but that failed as well!
    I have attached the compressed log file.
    I am riunning Win 7 Home Premium (x64)
    Help please!
    Steve

    See if any of the solutions here help:
    http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

  • Can I use BOTH Verizon DSL Wireless AND DISHnet Wireless at the same time?

    Waiting for Dishnet contract to die and rot away but about 2 months to go.  Want to get with Verison Standard DSL Wireless as no data cap tho slower.
    I can just wait till Dishnet dies and keep bumping into data caps with the Dish service OR can I get the DSL setup and use one connex for the iMac and one for the iPad without any conflicts?
    I am so ignorant of technology that I see a Swing-a-Way hand crank can opener as a marvel of industrial magic,....so please talk simple words to me, :-) 
    Thanks
    DH

    Sign up for the fastest DSL package that you can. Even if the overall speed is slower, the fact that you won't be going over a satellite connection anymore should make the Internet *that* much faster. The Wireless Gateway should come included.
    You can use both services at once, although note that determining how you plan to use both at the same time is going to be another story. Some people use Dual WAN routers (as in, routers that accept two Internet connections and can balance between the two). Others will use the connections separately, by moving devices between the two connections as needed.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems n

    Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer.  I have a pretty simple system with only a few plug-ins, which are usually not in operation.  I have 12GB of RAM in my Windows 7 PC.  I could illustrate these problems with screen shots if you would tell me how to submit screen shots.  Otherwise I will try to describe the problems in words.
    The problem is clearly cumulative, growing worse as usage time passes.  Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond.   In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces  (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
    To experiment I created a new catalog of 1100 images.  After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size  images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
    I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data.  (I have a screen shot to show this.)  CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
    Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong.  I could also send screen shots of this data.
    At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR.  This is not normal.  I hope you can find the cause, and then the solution.  If you would like to see my screen shots, tell me how to submit them.
    Ollie
    [email protected]

    Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer.  I have a pretty simple system with only a few plug-ins, which are usually not in operation.  I have 12GB of RAM in my Windows 7 PC.  I could illustrate these problems with screen shots if you would tell me how to submit screen shots.  Otherwise I will try to describe the problems in words.
    The problem is clearly cumulative, growing worse as usage time passes.  Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond.   In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces  (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
    To experiment I created a new catalog of 1100 images.  After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size  images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
    I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data.  (I have a screen shot to show this.)  CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
    Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong.  I could also send screen shots of this data.
    At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR.  This is not normal.  I hope you can find the cause, and then the solution.  If you would like to see my screen shots, tell me how to submit them.
    Ollie
    [email protected]

  • Problems setting up Verizon DSL (DHCP) and AirPort Extreme

    I have Verizon DSL with DHCP and old router (Linksys WRT54G). I've bought iMac and new router (AirPort Extreme) to connect to iMac wirelessly. I have a Windows computer connected to the Linksys WRT54G. Now here is the story. I can connect verizon DSL modem (it's in bridge mode) to PC directly and connect to the Internet. When I plug AirPort between the DSL modem and PC, auto-configuration doesn't work, AirPort utility says there is problem with internet connection. Router simply can't obtain IP address from verizon's DHCP server. I've tried to copy DNS server addressed from the IP configuration in Windows, the AirPort light went green and Windows indicated connection as successful, however I still cound't browse the Internet because gateway is not set. Any ideas how to make AirPort connect to the internet using DHCP instead of manual settings? I can try to do it from the mac if needed, I don't think it would make any difference though.

    Welcome to the discussions!
    Sorry, I can't quite track exactly what you are trying to do.
    What would the network that you are trying to set up look like?
    Modem>AirPort Extreme>Computers? Are you saying that you won't be using the Linksys in the new setup?
    Sounds like you need to set the Airport Extreme up to supply PPPoE service (which the Linksys is doing now-if the modem is in bridge mode), but I will wait for your response before offering specific info.
    If you've been fiddling with settings, we may need to do a hard-reset on the AX to start over. You should not be fiddling with DNS, etc. Almost always, these settings are done automatically when you have the device set up correctly.

  • I recently upgraded to Firefox 13.0.1 and I'm operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard). Now I'm having intermittent problems with sending

    I recently upgraded to Firefox 13.0.1 and I’m operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard).
    Now I’m having intermittent problems with sending emails where Firefox freezes up. There is often a yellow warning above suggesting 32-bit mode, sometimes I can click to shift it that way, sometimes not.
    Anyone having these problems?
    Any suggestions?

    I recently upgraded to Firefox 13.0.1 and I’m operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard).
    Now I’m having intermittent problems with sending emails where Firefox freezes up. There is often a yellow warning above suggesting 32-bit mode, sometimes I can click to shift it that way, sometimes not.
    Anyone having these problems?
    Any suggestions?

  • I recieved an Adobe Master Collection License number from my school (Stevens Institute of Technology) and I can't figure out how to use it in order to get the product. I've created a username and that's as far as I've gotten.

    I recieved an Adobe Master Collection License number from my school (Stevens Institute of Technology) and I can't figure out how to use it in order to get the product. I've created a username and that's as far as I've gotten. I need to download the product and I can't figure out where to begin.

    Ask someone at your school... Do you have a Cloud redemption code, or a CS6 serial number?
    If Cloud, Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html and
    http://www.adobe.com/products/creativecloud/faq.html
    http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
    http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
    What it is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
    Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
    If CS6, download at Other downloads and enter your serial number when prompted
    Again... your 1st resource is your school

  • How to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

    how to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

    Hi ,
     Have you got any additional public IP Address from your service provider , If yes on router you can have static route for those additional IP Address pointing to your ASA  outside interface . 
    Accordingly you can configure NAT 
    HTH
    Sandy . 

  • A few questions about bluetooth technology and headsets...

    Alright I am new to bluetooth technology and headsets, and want to do the proper research before I buy one.
    1)I have seen some have 1.2 and 2.0 technology, so what is the difference and should I only look for one that offers 2.0?
    2)Do they all offer a vibrating alert?
    2b)Or just those really big kinds that look like hearing aides that have that little box behind your ear?...
    http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=2002 46049729
    3) Do they all have a multi-function button, 3way, mute, volume etc?
    3b) Or are some just a single button that only answers and hangs up?
    4) Do any of these charge via bluetooth?
    5) I've seen some bluetooths have a micro sd chip in them... what is the point of this? Can they be used like a usb storage device?
    6) Can you buy those usb to mini-usb adapters for charging and data transfer (not sure what kind of data you would transfer to a headset) separate from having to buy a combo kit that comes with it?

    You might try Google and look for answers, these are pretty comprehensive questions regarding a broad sweep of headsets. You might get answers on a few models, or just Apple's, here.
    If you click on each of the models in the link I gave you it goes into more detail about each one.

  • Mac won't update software or access iTunes shop. Message comes up with 'not connected to the net. Check connections' error. I still have internet access. Changed my Apple ID but no result. Repaired permissions and re-installed operating system.

    Mac won't update software or access iTunes shop. Message comes up with 'not connected to the net. Check connections' error. I still have internet access. Changed my Apple ID but no result. Repaired permissions and re-installed operating system.

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • The Creative Cloud application becomes inoperable continually on both my Windows 7 and 8.1 operating systems. I'm tired of re installing the application after deleting the OOBE file to get updates and syn settings between computers for Photoshop. Is this

    The Creative Cloud application becomes inoperable continually on both my Windows 7 and 8.1 operating systems. I'm tired of re installing the application after deleting the OOBE file to get updates and syn settings between computers for Photoshop. Is this an endemic problem with others? I'm using Google Chrome as my browser. Is this an issue with the problem?

    Similar problem just happened to me with the Creative Cloud Update 1.7.1.418—slightly different so I thought I'd share. I have multiple Adobe Creative Cloud programs installed on my computer, all working just fine. I updated the Cloud App to the latest version and then it shows me that I have only one program installed! All my previously installed programs (Photoshop and the like) still work but show as "install" instead of "Up to date". Initially I thought I'd have to re-install the Cloud app or recreate the OPM data base but then I noticed that some of the Cloud app preferences (Apps > Settings > App Language) were different to what I had set previously. I use English (International) language, the update had reverted the app back to English (North American). I flicked back to my previous language and bam, all my apps now show as being installed correctly.

  • Iam not able to share internet in windows 8 from my macbook air...though my iphone ipad is connected to the hotspot well..tried everything but it seems to be different from windows 7  and other microsft operating systems setting. help!!

    Iam not able to share internet in windows 8 from my macbook air...though my iphone ipad is connected to the hotspot well..tried everything but it seems to be different from windows 7  and other microsft operating systems setting. help!!

    Ask on a Windows forum since that's what you're having a problem with.

  • This field contains duplicate values. Remove all duplicate values and try the operation again.

    Greetings Everyone,
    I am getting the follow up errors: "This field contains duplicate values. Remove all duplicate values and try the operation again."
    when I tried to make the field "Claim Number" from the list in site collection library. See the screen below:
    1- I selected on the "List" and I clicked on the list name
    "Claim Tracking Report"
    2- After I clicked on the list name then I went to the ribbon and selected list setting to choose Enforce Unique for the Field Column
    "Claim Number"
    3- Then I went down and selected
    "Yes" to Enforced the Unique for the Field Column "Claim Number".
    4- Then after I clicked "Yes" I got the error
    "Sorry, something went wrong. This field contains duplicate values. Remove all duplicate values and try the operation again."  But I don't have any duplicates values Items, because I had them removed before I tried
    to Enforce the field column values to Unique. Can someone help or provide me a suggestions on how I can solve this issue please. Thank you
    FYI: I am using a Nintex Workflow

    Hope this is a list, how many total items are there?
    Please try to open this list as access(link in IE) and run this query in access
    SELECT Claim.[Claim Number], Count(*) AS Expr1
    FROM Claim
    GROUP BY Claim.[Claim Number]
    HAVING (((Count(*))>1));
    Hope it will show something! if this does not show you dups then better to create a separate list and migrate items after configuring unique column.
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. Any suggestions?

    Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. The light on the Express is flashing green though. Does it mean I have to re-set the settings on Airport Utility? I.e. the old settings haven't been cleared yet. Any suggestions?

    Let's see if I can get this straight.
    You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
    Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
    Correct?
    See this Apple document:
    http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
    The wireless unit on the right of the diagram can be either of the newer Apple base stations.
    Extreme, Express, Time Capsule

  • I have messed my MacBook Pro attempting to customize it. I am far from savvy with technology and I would like to erase and reset it to out of the box brand new and start over

    I have messed my MacBook Pro attempting to customize it. I am far from savvy with technology and I would like to erase and reset it to out of the box brand new and start over

    Polly,
    usually there are multiple models of MacBook Pro per model number, but in the case of your model number (A1502), there’s currently only one model for that model number: 13-inch Late 2013.
    To reset your MacBook Pro, you’ll need to boot into Recovery mode by holding down a Command key and the R key as you start it up. When the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk (most likely the top item of the list). On the right-hand side, select the Erase tab. For the Format dropdown, select “Mac OS Extended (Journaled)”. For the Name input box, “Macintosh HD” has traditionally been the default name — I don’t know if that’s still the case for the Late 2013 models. After that, press the Erase… button, and erase its entire internal disk. When it’s finished with the erasure, exit Disk Utility, and select Shut Down from the Apple menu. When you start it up again, OS X Internet Recovery will redownload Mavericks from Apple’s servers and reïnstall it on your internal disk. Once it has reïnstalled, run Software Update to get it up to date, and adjust the System Preferences to your taste.

Maybe you are looking for