DTD not available during deployment

Hello
We had a problem that during the deployment of our ear, some dtd's of struts where not accessible on the internet. It seems that xml files are validated, during deployment, so the application was not deployed properly.
Is there a way to either :
- configure the container that no validatio should be done when deploying the ear
- put the dtd in the application itself, so we don't depend on the struts site wether we can deploy or not
grtz
Chris.

The problem is I am trying to use JavaMail in an EJB and it gives me the error if I create a javax.mail.Session. If I comment out the Session, deployment is fine. I am thinking that maybe the problem is I am using 8i version 8.1.5 and it only supports java 1.1.8.

Similar Messages

SAP LSO - Time integration; Error Participant not available during course

Dear Gurus,
I have requirement to enable employees to book the course irrespective of the Workshedule he is available in. Please let me know how to acheive it.
Thanks and regards
Saravanan K

Hello Saravanan,
You have mentioned participant not available during course
the reason for this may be check any future action was done on the participant or check whether the participant is reserved/booked as a trainer on that day.
Time integration will show impact on attendance only.
thanks
rafi

Content Selector is not loading during deployment

Hi Alll,
I am using weblogic portal 10.2 and MySQL 5.0.
I have created content selector during developement using workshop.
and deployed the same EAR in Staging server.
But content selector is not loaded after deployment.
I got confirmation after checking adminconsole ->> Content Selectors(Which will be displayed in home page of admin console after login)
And i can see that , other changes ,,JSP Changes...are reflected as part of deployment.
Please let me know what might be the poblem,for not loading content selector??
Is there any number of restrictions on number of content selectors for an environment??
Srinivas

hi
production mode does have the behavior you see, and there are good reasons why this must be so.
You mean to say, we need to propagate Content selectors from STAGING to PRODUCTION??Yes you need to propagate from an environment which has all the data you want correctly to your production environment. You can scope the propagation to only Content Selectors (if you want, the documentation has data how you can do this) and you can run this via GUI or via ANT.
regards
deepak

Class not found during deployment

I'm getting "class not found during deserialization of descriptor" during deployment of an EJB. What does this mean?

The problem is I am trying to use JavaMail in an EJB and it gives me the error if I create a javax.mail.Session. If I comment out the Session, deployment is fine. I am thinking that maybe the problem is I am using 8i version 8.1.5 and it only supports java 1.1.8.

Error 8201 (Database version not available) during ODatabase() in VC++

Hello all,
I'm Beginner and i think i have a stupid problem,
when i execute under VC++ V6 SP5 (and IE 5.5 SP2) Under W98se :
OStartup();
ODatabase odb("essai","SYSTEM","manager"); // 'essai' is an existing database, no problem with sql*plus
if (!odb.IsOpen()) {
long err = odb.ErrorNumber();
char chaine[100];
sprintf(chaine,"Error n0=%ld",err);
::MessageBox(0,chaine,"DataBase",0);
Displaying 'Error n08201' : 'Database version not available' ???
PLEASE, THIS PROBLEM TURN ON MY MIND DURING ALL THIS WEEK-END AND I TEST, I RELEASE, I SEARCHE, AND NOTING...

My Reponse from My Question :
It was so easy to run 'lsnrctl start'.
(Listen Module Manager).
2 days to find this.
VB doesn't work anymore.
I've executed an pre-compiled example 'login.exe' which display --> 'No Listen Module'.
Bye All.

[SOLVED] LVM physical volume not available during early boot

Note to self:
Of course it's not available - it's in an encrypted LVM container!
Hi,
I'm trying to get myself a working hibernate but I'm stuck on resume hook not seeing my swap partition.
The swap partition is on an LVM logical volume (LV) which is on one physical volume PV created on a different harddrive than the root partition is. During the bootup I get something similar to "ERROR: hibernation partition '/dev/mapper/volgrp-swap' not found".
Further debugging gave out that for some reason the early userspace has no access to LVM physical volume. I managed to run a shell using break=premount boot parameter. From there I found out that "lvm pvscan" shows no physical volumes at all. I suspect that mkinitcpio does not give a damn about non-root harddrive though I was unable to confirm that and neither was I able to find any other reason for this behaviour.
Relevant lines from mkinitcpio.conf:
MODULES="dm_mod btrfs"
HOOKS="base udev block lvm2 autodetect keyboard encrypt resume filesystems fsck"
Any help would be appreciated, including any tips on where to get more debug data.
cheers,
-miky
Last edited by mr.MikyMaus (2013-09-25 21:32:32)

Fackamato wrote:
Do you have the correct "root=" line in your bootloader's kernel line? Is it in fstab?
Perhaps try with rootdelay=5 as well?
Yes I have root=/dev/mapper/hdgroup0-volroot, and its in fstab (not that fstab is even being read)
root delay wouldn't help at all because after it drops me to a busybox shell I can't do a manual mount.

OVM 3.3.1: NFS storage is not available during repository creation

Hi, I have OVM Manager running on a separate machines managing 3 servers running OVM server in a server pool. One of the server also exports a NFS share that all other machines are able to mount and read/write to. I want to use this NFS share to create a OVM repository but so far unable to get it to work.
From this first screen shot we can see that the NFS file system was successfully added under storage tab and refreshed.
https://www.dropbox.com/s/fyscj2oynud542k/Screenshot%202014-10-11%2013.40.00.png?dl=0
But its is not available when adding a repository as shown below. What can I did to make it show up here.
https://www.dropbox.com/s/id1eey08cdbajsg/Screenshot%202014-10-11%2013.40.19.png?dl=0
No luck with CLI either. Any thoughts?
OVM> create repository name=myrepo fileSystem="share:/" sharepath=myrepo - Configurable attribute by this name can't be found.
== NFS file system refreshed via CLI ===
OVM> refresh fileServer name=share
Command: refresh fileServer name=share
Status: Success
Time: 2014-10-11 13:28:14,811 PDT
JobId: 1413059293069
== file system info
OVM> show fileServer name=share
Command: show fileServer name=share
Status: Success
Time: 2014-10-11 13:28:28,770 PDT
Data:
FileSystem 1 = ff5d21be-906d-4388-98a2-08cb9ac59b43 [share]
FileServer Type = Network
Storage Plug-in = oracle.generic.NFSPlugin.GenericNFSPlugin (1.1.0) [Oracle Generic Network File System]
Access Host = 1.2.3.4
Admin Server 1 = 44:45:4c:4c:46:00:10:31:80:51:c6:c0:4f:35:48:31 [dev1]
Refresh Server 1 = 44:45:4c:4c:46:00:10:31:80:51:c6:c0:4f:35:48:31 [dev1]
Refresh Server 2 = 44:45:4c:4c:47:00:10:31:80:51:b8:c0:4f:35:48:31 [dev2]
Refresh Server 3 = 44:45:4c:4c:33:00:10:34:80:38:c4:c0:4f:53:4b:31 [dev3]
UniformExports = Yes
Id = 0004fb0000090000fb2cf8ac1968505e [share]
Name = share
Description = NFS exported /dev/sda1 (427GB) on dev1
Locked = false
== version details ==
OVM server:3.3.1-1065
Agent Version:3.3.1-276.el6.7Kernel Release:3.8.13-26.4.2.el6uek.x86_64
Oracle VM Manager
Version: 3.3.1.1065
Build: 20140619_1065

Actually, OVM, as is with all virtualization servers, is usually only the head on a comprehensive infrastructure. OVM seems quite easy from the start, but I'd suggest, that you at least skim trough the admin manual, to get some understanding of the conecpts behind it. OVS thus usually only provides the CPU horse power, but not the storage, unless you only want to setup a single-server setup. If you plan on having a real multi-server setup, then you will need shared storage.
The shared storage for the server pool, as well as the storage repository can be served from the same NFS server without issues. If you want to have a little testbed, then NFS is for you. It lacks some features that OCFS2 benefits from, like thin provisioning, reflinks and sparse files.
If you want to remove the NFS storage, then you'll need to remove any remainders of any OVM object, like storage repositories or server pool filesystems. Unpresent and storage repo and delete it afterwards… Also, I hope that you didn't create the NFS export directly on the root of the drive, since OVM wants to remove any file on the NFS export and on any root of ony volume there's the lost-found folder, which OVM, naturally, can't remove. Getting rid of such a storage repo can be a bit daunting…
Cheers,
budy

ResourceAdapter not found during deployment using WL 7.0 SP2

Hi,
          Am using WL 7.0 SP2 on Win2k w/ JDK 1.4.
          Am using the non-managed mode (wherein the admin server is also the managed-server).
          Am trying to deploy my RA. On uploading the RAR using
          the admin console, I get the following error (from the server.log):
          Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Info Deployer Initiating a deployment task with id 8 for application bs-ra
          Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Info Deployer preparing application bs-ra on vspl-dev-server
          Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Info Deployer prepared application bs-ra on vspl-dev-server
          Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Info Management Configuration changes for domain saved to the repository.
          Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Info Deployer activating application bs-ra on vspl-dev-server
          Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Info Connector Initializing connection pool for resource adapter BookStore-
          Resource Adapter_eis/BSResourceAdapter.
          Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Error Deployer Unexpected error was encountered during the deployment proce
          ss.
          Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Error Deployer The Slave Deployer failed to complete the deployment task wi
          th id 8 for the application bs-ra.
          java.lang.NoClassDefFoundError: javax/resource/spi/ResourceAdapter
               at java.lang.Class.getMethods0(Native Method)
               at java.lang.Class.getDeclaredMethods(Class.java:1034)
               at java.beans.Introspector$1.run(Introspector.java:847)
               at java.security.AccessController.doPrivileged(Native Method)
               at java.beans.Introspector.getPublicDeclaredMethods(Introspector.java:845)
               at java.beans.Introspector.getTargetEventInfo(Introspector.java:551)
               at java.beans.Introspector.getBeanInfo(Introspector.java:289)
               at java.beans.Introspector.getBeanInfo(Introspector.java:76)
               at weblogic.connector.common.internal.ConnectionPool.<init>(ConnectionPool.java:402)
               at weblogic.connector.common.internal.ConnectionPoolManager.addManagedConnectionFactory(ConnectionPoolManager.java:64)
               at weblogic.connector.deploy.ConnectorDeployer.activate(ConnectorDeployer.java:315)
               at weblogic.connector.deploy.ConnectorModule.activate(ConnectorModule.java:221)
               at weblogic.j2ee.J2EEApplicationContainer.activateModule(J2EEApplicationContainer.java:1662)
               at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:1087)
               at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:1074)
               at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:1110)
               at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:730)
               at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:24)
               at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
               at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
          --------------- nested within: ------------------
          weblogic.management.ManagementException: 149233 - with nested exception:
          [java.lang.NoClassDefFoundError: javax/resource/spi/ResourceAdapter]
               at weblogic.management.deploy.slave.SlaveDeployer.convertThrowable(SlaveDeployer.java:834)
               at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:1180)
               at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:730)
               at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:24)
               at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
               at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
          Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Warning Deployer Failures detected initiating weblogic.management.ManagementE
          xception: 149233 - with nested exception:
          [java.lang.NoClassDefFoundError: javax/resource/spi/Resource
                                                                                              Adapter] task for application Activate application bs-ra on
          vspl-dev-server
          Jun 9, 2003 5:32:32 PM EDT vspl-dev-server Info Management Configuration changes for domain saved to the repository.
          Jun 9, 2003 5:32:36 PM EDT vspl-dev-server Error Connector ManagedConnectionFactory not found for jndiName eis/BSResour
          ceAdapter.
          Jun 9, 2003 5:32:39 PM EDT vspl-dev-server Error Connector ManagedConnectionFactory not found for jndiName eis/BSResour
          ceAdapter.
          Jun 9, 2003 5:32:47 PM EDT vspl-dev-server Error Connector ManagedConnectionFactory not found for jndiName eis/BSResour
          ceAdapter.
          Jun 9, 2003 5:32:48 PM EDT vspl-dev-server Error Connector ManagedConnectionFactory not found for jndiName eis/BSResour
          ceAdapter.
          There are two things I observer here.
          1. The ResourceAdapter class does not seem to be found by Weblogic. It's part of the javax.resource.spi package.
          I checked the weblogic.jar archive in the WL-HOME/server/lib folder. It does not seem to have the class. Why ?
          2. It complains about the ManagedConnectionFactory not being found. Am assuming that if the RA was deployed
          in the first place, I would not have seen this error (coz, the ManagedConnectionFactory would have been
          deployed in the previous step). Right ?
          I did observe that WL 7.0 supports only JCA 1.0. In JCA 1.0's (public) API, there is no mention of the
          javax.resource.spi.ResourceAdapter class, though the spec talks about it. ??
          Note: I had designed and implemented my RA as per JCA 1.5 (but nothing 1.5-specific, I guess).
          Any ideas ?
          thanks,
          raghu


I figured it out. Darn simple.
          My ManagedConnectionFactory implementation referenced ResourceAdapter as
          it has to implement the ManagedConnnectionFactory interface of JCA 1.5.
          In JCA 1.0 (which is supported by WL 7.0 & 8.1), the ResourceAdapater
          is undefined. Hence, the classloading problem.
          Sorry for any confusion.
          raghu
          raghu h wrote:
          > Hi,
          >
          > Am using WL 7.0 SP2 on Win2k w/ JDK 1.4. Am using the non-managed mode
          > (wherein the admin server is also the managed-server).
          >
          > Am trying to deploy my RA. On uploading the RAR using
          > the admin console, I get the following error (from the server.log):
          >
          >
          >
          > -----------------------------------------------------------------------------------------------------------------
          >
          >
          > Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Info
          > Deployer Initiating a deployment task with id 8 for
          > application bs-ra
          > Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Info
          > Deployer preparing application bs-ra on
          > vspl-dev-server Jun 9, 2003 5:32:31 PM EDT
          > vspl-dev-server Info Deployer prepared application
          > bs-ra on vspl-dev-server Jun 9, 2003 5:32:31 PM EDT
          > vspl-dev-server Info Management Configuration
          > changes for domain saved to the repository. Jun 9, 2003 5:32:31 PM
          > EDT vspl-dev-server Info Deployer activating
          > application bs-ra on vspl-dev-server Jun 9, 2003 5:32:31 PM
          > EDT vspl-dev-server Info Connector
          > Initializing connection pool for resource adapter BookStore-
          >
          > Resource Adapter_eis/BSResourceAdapter.
          >
          > Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Error
          > Deployer Unexpected error was encountered during the
          > deployment proce
          >
          > ss.
          >
          > Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Error
          > Deployer The Slave Deployer failed to complete the deployment
          > task wi
          >
          > th id 8 for the application bs-ra.
          >
          > java.lang.NoClassDefFoundError: javax/resource/spi/ResourceAdapter
          > at java.lang.Class.getMethods0(Native Method)
          > at java.lang.Class.getDeclaredMethods(Class.java:1034)
          > at java.beans.Introspector$1.run(Introspector.java:847)
          > at java.security.AccessController.doPrivileged(Native Method)
          > at
          > java.beans.Introspector.getPublicDeclaredMethods(Introspector.java:845)
          > at java.beans.Introspector.getTargetEventInfo(Introspector.java:551)
          > at java.beans.Introspector.getBeanInfo(Introspector.java:289)
          > at java.beans.Introspector.getBeanInfo(Introspector.java:76)
          > at
          > weblogic.connector.common.internal.ConnectionPool.<init>(ConnectionPool.java:402)
          >
          > at
          > weblogic.connector.common.internal.ConnectionPoolManager.addManagedConnectionFactory(ConnectionPoolManager.java:64)
          >
          > at
          > weblogic.connector.deploy.ConnectorDeployer.activate(ConnectorDeployer.java:315)
          >
          > at
          > weblogic.connector.deploy.ConnectorModule.activate(ConnectorModule.java:221)
          >
          > at
          > weblogic.j2ee.J2EEApplicationContainer.activateModule(J2EEApplicationContainer.java:1662)
          >
          > at
          > weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:1087)
          >
          > at
          > weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:1074)
          >
          > at
          > weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:1110)
          >
          > at
          > weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:730)
          >
          > at
          > weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:24)
          >
          > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
          > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
          > --------------- nested within: ------------------
          > weblogic.management.ManagementException: 149233 - with nested exception:
          > [java.lang.NoClassDefFoundError: javax/resource/spi/ResourceAdapter]
          > at
          > weblogic.management.deploy.slave.SlaveDeployer.convertThrowable(SlaveDeployer.java:834)
          >
          > at
          > weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:1180)
          >
          > at
          > weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:730)
          >
          > at
          > weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:24)
          >
          > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
          > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
          > Jun 9, 2003 5:32:31 PM EDT vspl-dev-server Warning
          > Deployer Failures detected initiating
          > weblogic.management.ManagementE
          >
          > xception: 149233 - with nested exception:
          >
          > [java.lang.NoClassDefFoundError: javax/resource/spi/Resource
          >
          > Adapter] task for application Activate application bs-ra on
          >
          > vspl-dev-server
          >
          > Jun 9, 2003 5:32:32 PM EDT vspl-dev-server Info
          > Management Configuration changes for domain saved to the
          > repository. Jun 9, 2003 5:32:36 PM EDT vspl-dev-server
          > Error Connector ManagedConnectionFactory not found for
          > jndiName eis/BSResour
          >
          > ceAdapter.
          >
          > Jun 9, 2003 5:32:39 PM EDT vspl-dev-server Error
          > Connector ManagedConnectionFactory not found for jndiName
          > eis/BSResour
          >
          > ceAdapter.
          >
          > Jun 9, 2003 5:32:47 PM EDT vspl-dev-server Error
          > Connector ManagedConnectionFactory not found for jndiName
          > eis/BSResour
          >
          > ceAdapter.
          >
          > Jun 9, 2003 5:32:48 PM EDT vspl-dev-server Error
          > Connector ManagedConnectionFactory not found for jndiName
          > eis/BSResour
          >
          > ceAdapter.
          >
          > -------------------------------------------------------------------------------------------------------------
          >
          >
          >
          > There are two things I observer here. 1. The ResourceAdapter class does
          > not seem to be found by Weblogic. It's part of the javax.resource.spi
          > package.
          > I checked the weblogic.jar archive in the WL-HOME/server/lib folder. It
          > does not seem to have the class. Why ?
          > 2. It complains about the ManagedConnectionFactory not being found. Am
          > assuming that if the RA was deployed
          > in the first place, I would not have seen this error (coz, the
          > ManagedConnectionFactory would have been
          > deployed in the previous step). Right ?
          >
          > I did observe that WL 7.0 supports only JCA 1.0. In JCA 1.0's (public)
          > API, there is no mention of the
          > javax.resource.spi.ResourceAdapter class, though the spec talks about
          > it. ??
          >
          >
          > Note: I had designed and implemented my RA as per JCA 1.5 (but nothing
          > 1.5-specific, I guess).
          >
          > Any ideas ?
          >
          > thanks,
          > raghu
          >
          >
          >
          >

Rulebases not available when deploying OPA 10.2 on Weblogic

Hi,
Before upgrading to version 10.2 of determinations-server.war I was running 10.1 deployed to WLS 10.3. I used the java option -Ddeterminations.server.rulebase.dir to point out where rulebases should be loaded from. After switching to 10.2 thiss setting doesn't work.
When using the documented settings for classpath loading in application.properties I set up
load.rulebase.from.claspath=true
rulebase.path=rulebases
As I understand it the directory rulebases is seached for in CLASSPATH of WLS so I added the directory C:\bea\user_projects\domains\windomain to CLASSPATH of WLS. windomain contains a directory "rulebases" containing my working rulebases.
When listing rulebases nothing is available.
The war is deployed unexploded and this is the way the customer wants it. I wish to just modify application.properties so classpath loading works and have the rulebases on the file system.
Similar post hinting this should work: Error installing web-determinations 10.1.0.27 on WLS 10.3.3

C:\bea\user_projects\domains\windomain is located in CLASSPATH. (which I see in startup log)
C:\bea\user_projects\domains\windomain\rulebases contains my zipfiles which are working if i deploy exploded war.
My war file is located in C:\bea\user_projects\domains\windomain\autodeploy
application.properties is set according to
load.rulebase.from.claspath=true
rulebase.path=rulebases
I have also tried setting CLASSPATH to C:\bea\user_projects\domains\windomain\rulebases without any positive result.
At least one more colleague has tried the same approach with trying to load rulebases from CLASSPATH (WLS), but with no success. We have tried Windows, Solaris and Linux without success.
The log shows the following, which it also does if I deploy exploded.
<2011-mar-25 kl 10:40 CET> <Info> <Health> <BEA-310002> <71% of the total memory in the server is free>
<2011-mar-25 kl 10:42 CET> <Notice> <Stdout> <BEA-000000> <10:42:58,408 INFO [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.D
efault (self-tuning)'] INFO com.oracle.determinations.server.DSServlet - GET request: pathinfo=null queryString=null contextPath=/dete
rminations-server>
<2011-mar-25 kl 10:42 CET> <Notice> <Stdout> <BEA-000000> <10:42:58,549 WARN [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.D
efault (self-tuning)'] WARN com.oracle.determinations.interview.engine.local.LocalInterviewEngine - Plugin directory could not be init
ialised. No plugins will be loaded
java.lang.IllegalArgumentException: Can not locate plugin directory 'plugins'. On the classpath
at com.oracle.util.plugins.PluginRegistry.addPluginsFromDir(PluginRegistry.java:99)
at com.oracle.determinations.interview.engine.local.LocalInterviewEngine.initialise(LocalInterviewEngine.java:101)
at com.oracle.determinations.interview.engine.local.LocalInterviewEngine.<init>(LocalInterviewEngine.java:59)
at com.oracle.determinations.interview.engine.InterviewEngineFactory.createInstance(InterviewEngineFactory.java:19)
at com.oracle.determinations.server.DSServletContext.<init>(DSServletContext.java:35)
at com.oracle.determinations.server.DSServlet.getOrCreateContext(DSServlet.java:128)
at com.oracle.determinations.server.DSServlet.doGet(DSServlet.java:42)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3498)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)>
<2011-mar-25 kl 10:42 CET> <Notice> <Stdout> <BEA-000000> <10:42:58,565 WARN [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.D
efault (self-tuning)'] WARN com.oracle.determinations.server.assess.AssessEngine - Plugin directory could not be initialised.
java.lang.IllegalArgumentException: Can not locate plugin directory 'plugins'. On the classpath
at com.oracle.util.plugins.PluginRegistry.addPluginsFromDir(PluginRegistry.java:99)
at com.oracle.determinations.server.assess.AssessEngine.<init>(AssessEngine.java:67)
at com.oracle.determinations.server.DSServletContext.<init>(DSServletContext.java:38)
at com.oracle.determinations.server.DSServlet.getOrCreateContext(DSServlet.java:128)
at com.oracle.determinations.server.DSServlet.doGet(DSServlet.java:42)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3498)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)>
<2011-mar-25 kl 10:42 CET> <Notice> <Stdout> <BEA-000000> <10:42:58,580 INFO [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.D
efault (self-tuning)'] INFO com.oracle.util.plugins.PluginRegistry - Successfully created plugin factory: com.oracle.determinations.se
rver.services.server.current.ServerServiceCurrent>
<2011-mar-25 kl 10:42 CET> <Notice> <Stdout> <BEA-000000> <10:42:58,580 INFO [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.D
efault (self-tuning)'] INFO com.oracle.util.plugins.PluginRegistry - Successfully created plugin factory: com.oracle.determinations.se
rver.services.server.v10_2.ServerService102>
<2011-mar-25 kl 10:42 CET> <Notice> <Stdout> <BEA-000000> <10:42:58,580 INFO [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.D
efault (self-tuning)'] INFO com.oracle.util.plugins.PluginRegistry - Successfully created plugin factory: com.oracle.determinations.se
rver.services.server.v10_0.ServerService10>
<2011-mar-25 kl 10:42 CET> <Notice> <Stdout> <BEA-000000> <10:42:58,721 INFO [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.D
efault (self-tuning)'] INFO com.oracle.util.plugins.PluginRegistry - Successfully created instance of plugin: com.oracle.determination
s.server.services.server.current.ServerServiceCurrent>
<2011-mar-25 kl 10:42 CET> <Notice> <Stdout> <BEA-000000> <10:42:58,768 INFO [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.D
efault (self-tuning)'] INFO com.oracle.util.plugins.PluginRegistry - Successfully created instance of plugin: com.oracle.determination
s.server.services.server.v10_2.ServerService102>
<2011-mar-25 kl 10:42 CET> <Notice> <Stdout> <BEA-000000> <10:42:58,799 INFO [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.D
efault (self-tuning)'] INFO com.oracle.util.plugins.PluginRegistry - Successfully created instance of plugin: com.oracle.determination
s.server.services.server.v10_0.ServerService10>
<2011-mar-25 kl 10:42 CET> <Notice> <Stdout> <BEA-000000> <10:42:58,799 INFO [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.D
efault (self-tuning)'] INFO com.oracle.util.plugins.PluginRegistry - Successfully created plugin factory: com.oracle.determinations.se
rver.services.interview.current.InterviewServiceCurrent>
<2011-mar-25 kl 10:42 CET> <Notice> <Stdout> <BEA-000000> <10:42:58,799 INFO [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.D
efault (self-tuning)'] INFO com.oracle.util.plugins.PluginRegistry - Successfully created plugin factory: com.oracle.determinations.se
rver.services.interview.v10_2.InterviewService10_2>
<2011-mar-25 kl 10:42 CET> <Notice> <Stdout> <BEA-000000> <10:42:58,815 INFO [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.D
efault (self-tuning)'] INFO com.oracle.util.plugins.PluginRegistry - Successfully created plugin factory: com.oracle.determinations.se
rver.services.assess.current.SpecificAssessServiceCurrent>
<2011-mar-25 kl 10:42 CET> <Notice> <Stdout> <BEA-000000> <10:42:58,815 INFO [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.D
efault (self-tuning)'] INFO com.oracle.util.plugins.PluginRegistry - Successfully created plugin factory: com.oracle.determinations.se
rver.services.assess.current.GenericAssessServiceCurrent>
<2011-mar-25 kl 10:42 CET> <Notice> <Stdout> <BEA-000000> <10:42:58,815 INFO [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.D
efault (self-tuning)'] INFO com.oracle.util.plugins.PluginRegistry - Successfully created plugin factory: com.oracle.determinations.se
rver.services.assess.v10_2.SpecificAssessService102>
<2011-mar-25 kl 10:42 CET> <Notice> <Stdout> <BEA-000000> <10:42:58,815 INFO [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.D
efault (self-tuning)'] INFO com.oracle.util.plugins.PluginRegistry - Successfully created plugin factory: com.oracle.determinations.se
rver.services.assess.v10_2.GenericAssessService102>
<2011-mar-25 kl 10:42 CET> <Notice> <Stdout> <BEA-000000> <10:42:58,830 INFO [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.D
efault (self-tuning)'] INFO com.oracle.util.plugins.PluginRegistry - Successfully created plugin factory: com.oracle.determinations.se
rver.services.assess.v10_0.SpecificAssessService10>
<2011-mar-25 kl 10:42 CET> <Notice> <Stdout> <BEA-000000> <10:42:58,830 INFO [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.D
efault (self-tuning)'] INFO com.oracle.util.plugins.PluginRegistry - Successfully created plugin factory: com.oracle.determinations.se
rver.services.assess.v10_0.GenericAssessService10>
<2011-mar-25 kl 10:42 CET> <Notice> <Stdout> <BEA-000000> <10:42:58,846 WARN [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.D
efault (self-tuning)'] WARN com.oracle.determinations.server.ServiceRegistry - Plugin directory could not be initialised.
java.lang.IllegalArgumentException: Can not locate plugin directory 'plugins'. On the classpath
at com.oracle.util.plugins.PluginRegistry.addPluginsFromDir(PluginRegistry.java:99)
at com.oracle.determinations.server.ServiceRegistry.initRulebaseServices(ServiceRegistry.java:89)
at com.oracle.determinations.server.ServiceRegistry.<init>(ServiceRegistry.java:78)
at com.oracle.determinations.server.DSServletContext.<init>(DSServletContext.java:41)
at com.oracle.determinations.server.DSServlet.getOrCreateContext(DSServlet.java:128)
at com.oracle.determinations.server.DSServlet.doGet(DSServlet.java:42)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3498)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)>

Drop Ship across OUs - Operating Unit not available during Requisition Import

Hi,
I am trying to execute Drop Shipment across OUs on Vision Instance R12.1.1.
1)      Responsibility - Order Management Super User, Vision Operations (USA)
         Create SO in Vision Operations. In Others tab selected Warehouse as D1 ( Singapore Distribution Centre ). Line Item Source Type is External.
         Order Booked. Order line status is 'Awaiting Receipt'.
2)      Responsibility - Purchasing Super User.
         Request - Requisition Import.
         Issue - The Operating Unit LOV for Requisition Import is listing only 'Vision Operation'. The OU 'Singapore Distribution Centre' is not listed.
The responsibility Purchasing Super User has access to Org D1.
Please refer to attached screenshots for details.
Kindly help me with this process.

user12214874 wrote:
We are on Oracle EBS 11.5.10 and the requirement is that the US OU wants to drop ship a SO from our supplier in Japan(not part of Oracle installation) directly to our OU in Canada. (part of same Oracle installation). As per as per Oracle Order management users guide 11i; pg 1-7 drop ship across OU's and SOB's is possible. (Introduction chapter.) However when I read metalink note 225434.1, this is not possible. This looks to be a drawback with Oracle EBS since it is a very common requirement with most business going global these days. However, I may be wrong and the flow might very well be supported. If anybody has an idea, and provide some insights if this is supported in oracle or if there is a workaround available it would be appreciated.
*****Update******** I could create a Drop Ship So with Receiving Warehouse in another operating unit; I could also create the Internal Requistion and PO in the shipping OU. Also, the Payables Invoices to Selling OU was created. AR invoice against the Drop SO billed to Shipping OU was created. However I am still stuck as to the generation of Intercompany AR invoice. Also, I am wondering why is there a need for Intercompany AR invoice when the AR invoice is issued against the Drop SO?
Edited by: user12214874 on Feb 16, 2012 12:34 PMMy question is why would US OU want to drop ship to Canada OU...why can't canada OU directly raise a PO to a supplier in Japan??

Jazn.xml DTD not available (broken URL)

In OC4J 9.0.2 production and 9.0.3 preview the file j2ee/home/config/jazn.xml has the following DOCTYPE tag:
<!DOCTYPE jazn PUBLIC "JAZN Config" "http://xmlns.oracle.com/ias/dtds/jazn.dtd">
Presently--May 16, 2002--the URL http://xmlns.oracle.com/ias/dtds/jazn.dtd does not exist on Oracle's website. I don't know if it was there before or not, but you better put it there soon!

Scott,
Thanks for bringing this to our attention. We'll put it up shortly.
-Lee

CLASSPATH not taken during deployment

I created an ejb and while deploying I get error.
Following are the steps done
- did "ejbc" of the class files and created a jar(jar A) file.
(for an jb).
- The utility classes are wrapped into another (jarB).
- The jarA is deployed in "C:\iPlanet\ias6\ias\JAR"
while jarB is in a different directory.
When the jarA is opened using the deployment tool, i get an error
"The following entries are incorrectly packaged or have external
dependencies".
When I try to deploy it the tool spits out errors saying that the
utility files in jarB could not be found.
I updated the CLASSPATH in the registry under SOFTWARE\iPlanet\6.0\Java.
and also SOFTWARE\iPlanet\6.0\CCS0\SYSTEM_JAVA\GX_CLASSPATH.
Later I restarted the server and also the machine but with no
success.
Environment
===========
ias6.0SP3
Windows2000
Am I missing something here.!!!!
Thanks in advance
Chandu

Hi,
On the Windows platform you will have to add the JAR files to the
IAS_CLASSPATH in deploytool.bat. This is one way. Another way is to open up
deploytool and go to Edit>Preferences and set the complete path for your Jar
file. Click on apply and it will include the classes in the Jar file into
its classpath.
Rgds,
Irfan.
Chandu wrote:
I created an ejb and while deploying I get error.
Following are the steps done
- did "ejbc" of the class files and created a jar(jar A) file.
(for an jb).
- The utility classes are wrapped into another (jarB).
- The jarA is deployed in "C:\iPlanet\ias6\ias\JAR"
while jarB is in a different directory.
When the jarA is opened using the deployment tool, i get an error
"The following entries are incorrectly packaged or have external
dependencies".
When I try to deploy it the tool spits out errors saying that the
utility files in jarB could not be found.
I updated the CLASSPATH in the registry under SOFTWARE\iPlanet\6.0\Java.
and also SOFTWARE\iPlanet\6.0\CCS0\SYSTEM_JAVA\GX_CLASSPATH.
Later I restarted the server and also the machine but with no
success.
Environment
===========
ias6.0SP3
Windows2000
Am I missing something here.!!!!
Thanks in advance
Chandu

Management Point did not install during deployment

I found the 2007 client installed on this server prior to the install. I removed the client with /uninstall... however after the installation of CM 2012 the managment point did not install. It pointed me to the mpmsi.log. Below is that log. Has anyone run
into this issue before?
=== Verbose logging started: 2/25/2014 15:58:05 Build type: SHIP UNICODE 5.00.9600.00 Calling process: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe ===
MSI (c) (C4:40) [15:58:05:347]: Resetting cached policy values
MSI (c) (C4:40) [15:58:05:347]: Machine policy value 'Debug' is 0
MSI (c) (C4:40) [15:58:05:347]: ******* RunEngine:
           ******* Product: D:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi
           ******* Action:
           ******* CommandLine: **********
MSI (c) (C4:40) [15:58:05:348]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (C4:40) [15:58:08:348]: Failed to grab execution mutex. System error 258.
MSI (c) (C4:40) [15:58:08:350]: Cloaking enabled.
MSI (c) (C4:40) [15:58:08:350]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (C4:40) [15:58:08:350]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (c) (C4:40) [15:58:08:351]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (C4:40) [15:58:08:351]: MainEngineThread is returning 1618
=== Verbose logging stopped: 2/25/2014 15:58:08 ===
MSI (s) (80:58) [15:58:11:836]: User policy value 'DisableRollback' is 0
MSI (s) (80:58) [15:58:11:836]: Machine policy value 'DisableRollback' is 0
MSI (s) (80:58) [15:58:11:837]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (80:58) [15:58:11:837]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (80:58) [15:58:11:844]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (80:58) [15:58:11:860]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (80:58) [15:58:11:867]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (80:58) [15:58:11:881]: Destroying RemoteAPI object.
MSI (s) (80:60) [15:58:11:889]: Custom Action Manager thread ending.

MSI (c) (C4:40) [15:58:08:348]: Failed to grab execution mutex. System error 258.
This normally means there is another install process in progress. So please restart the computer and try again. If no avail, check whether there is a process name msiexec running.
Juke Chou
TechNet Community Support

PLANT NOT AVAILABLE DURING MIGO PURCHASE ORDER

Hello,
When selecting a PO during MIGO

Hello, for your information, if PO line items with GR-based-IV indicator ON (EKPO-WEBRE) the MSEG-LFBNR field will be updated with the GR document number.
For PO line items without the GR-based-IV indicator, the MSEG-LFBNR field will remain blank.
Thats the standard behavior!
Cheers!
Plauto

Turnkey option not available during install

I'm attempting to install ES on my laptop. However during the install process I specify that I'm installing on Windows and it goes straight to the PDF Generator configuration screen. It never prompts me to perform the turnkey installation. Any idea why?

Have you installed a older version by any chance?
If you did, make sure to delete the content of the C:\Program Files\Common Files\InstallShield\Universal\Adobe.
That should take care of it.
Jasmin

DTD not available during deployment

Similar Messages

Maybe you are looking for