DTP's not activating in SP11

Hi,
We were able to activate the DTP's successfully before applying SP11.
But after applying SP11, we are getting an error while activating the DTP. 
Here is the two errors displayed with RED symbol while performing "Post Processing/Creation of DDIC Objects for Data Transfer Process":
1) & --> Message no. D0313
2) Error when activating Data Transfer Process --> Message no. RSO404
I checked the OSS Notes for the above mentioned error messages, but it was not of much help.
Any information to resolve this issue is appreciated.
Thanks,

Many of the errors were introduced with SP-11 and then corrected back in SP-13.
You may wish to check for the same.
Hope it Helps
Chetan
@CP..

Similar Messages

  • Master data DTP IOBJT not active 7.0 SP12 NSP

    Good evening everybody,
    there is some trouble with the NetWeaver ABAP Trial SP12 when creating a DTP for master data. As soon as I confirm the popup to create one, an error message like this appears: "The target 0ACTIONTYPE (Type IOBJT) is not active
    Bye
    Peter

    Hello All,
    I faced the same issue.
    The problem is that although the InfoObject is active as an 'InfoObject', it also should be activated as an 'InfoSource' and 'InfoProvider'.
    For this, go to the tab 'Master Data/Texts' and give the application component name for the InfoSource and the InfoArea for the InfoProvider. You can see that the check boxes InfoSource with direct update and Characteristic is an InfoProvider will get checked.
    I hope this solves your issues.
    BR,
    - Midhun George

  • "Source is not Active" when creating DTP from  Datasource (BI. 7.0)

    Hello,
      I need to load data to ODS from a ZTable. Version 7.0
    This is what i have done so far:
      - Created a ZTABLE. (OK)
      - Loaded data via function modules through excel macros.  (OK)
      - Created DataSource(ZGDRDS01)  from a ZTABLE in RSO2. (I guess OK)
      - Create DataTransfer Process - (NOK)
           Source of DTP
             Object Type : DataSource
             DataSource : ZGDRDS01
             Source System: BWD
        - Error Message: Source ZGDRDS01 of BWD(type DTASRC) is not active (like if it didnt exists)
    (I didnt find any Activate button in RSO2)
    Somebody else did something similar before and created its own DataSource, that one I can use, but i need to create my own.

    Thank you for your fasts answers! That seemed to be part of the problem.
    Did you create Transformation which is a prereq for creating a DTP ?
    - No i didnt create the transformation first, but the problem was the same.  When I created a Transformation it asks me for the DataSource and back again to "source is not Active".
    New problem:
    I went to SourceSystem and replicated the datasources,
    - Know it appears just below the other one that was previously working.
    - However it appears with status Inactive and there is no Activate Button.
    - Something went wrong with the version because the column "M = A Version" appears  =/=, for my new Datasource. I right click on it -> Replicate Metadata but didnt help.  Any other option marks me something lik is not Active or
       "The DataSource  ZGDRDS01 (BWD) does not exists in object version A"
    if i right  clic -> Display
    Version = Modified (yellow)
    I deleted the datasource and generated it again with the same result.
    ¿do you know how to fix this?
    P.S ¿Should I post a new thread for this problem?

  • Error DTP is not working.

    Hi
    I have a question regarding DTP error handling. I have erronious data on PSA, now i am correcting data in PSA and loading to ODS and activating.As it is a full load, I want to keep these records in an another table like error PSA in 3.x. How it is possible in BI. I have created Error DTP which will post error records in Error stack and dont let the load fail. But it is not working.
    Please help me.
    Haaris

    HI,
    On the Update tab page in the data transfer process (DTP), the error handling settings allow you to control how the system responds if errors occur in the data records when data is transferred from a DTP source to a DTP target.
    These settings were previously made in the Info Package. When using data transfer processes, Info Packages only write to the PSA. Therefore, error handling settings are no longer made in the Info Package but in the data transfer process.
    Settings for Error Handling
    For a data transfer process (DTP), you can specify how you want the system to respond when data records contain errors. If you activate error handling, the records with errors are written to a request-based database table (PSA table). This is the error stack. You can use a special data transfer process, the error DTP, to update the records to the target.
    Temporary storage is available after each processing step of the DTP request. This allows you to determine the processing step in which the error occurred.
    "Repairing" with Error DTP
    You create an error DTP for an active data transfer process on the Update tab page. You run it directly in the background or include it in a process chain so that you can schedule it regularly in the context of your process chain. The error DTP uses the full update mode to extract data from the error stack (in this case, the source of the DTP) and transfer it to the target that you have already defined in the data transfer process.
    Thanks/Tarak

  • Request Status not Activating

    Dear All,
                  I have created Datasource and DSO and flat file and also created DTP.  If i request perticular request id , its not activating.  request status not activating.
    With Regards,
    Baskaran.

    Hi Baskaran,
    Follow these steps.
    Do the loading process as you are doing i.e. using Info package load to PSA, then using DTP to DSO.
    Then after loading data, you go to manage. Then Select your green request and then click activate.
    A new window will open. There your request will be green. Again select it and click on start (do not click on stop).
    Then you will find refresh button there. Click on it. Your green request will turn yellow. Now go on clicking refresh until your request disappears from there. After that close the window.
    Then again click on manage. Click on refresh. Now select active data. Your data will be displayed.
    Hope this helps.
    thanks,
    rahul

  • My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs?

    My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs? My apple ID is my Yahoo mail it self, but not able to log in to  Icloud, Can any body guide, Why, I can not.

    Hi dip_kinu,
    I apologize, I'm a bit unclear on exactly what device you are trying to set up and what is happening when you try to do so. If you are having issues remembering your Apple ID, or feel like you may have set up multiple Apple ID's, you may find the following page helpful:
    Apple - My Apple ID: Find your Apple ID
    https://iforgot.apple.com/appleid
    Regards,
    - Brenden

  • In Adobe Bridge when I try to open my camera raws, I get a pop up box stating "Bridges parent application is not active.  Bridge requires that a qualifying product has been launched at least once to enable this feature"  What do I do? Please advise

    In Adobe Bridge, when I try to open my camera raws, I get a pop up stating"Bridges parent application is not active.  Bridge requires that a qualifying product has been launced at least once to enable this feature."  What the heck?  I have a PC and haven't had problems before.. I have adobe cloud and pay my monthly bill...

    Have you opened Photoshop or any other Adobe app that Bridge works with?  You need to do this if you've upgraded PS or just signed up for CC.

  • Error: "Component is not active" but component is active

    Hi Experts,
    I transported a Web Dynpro application from source system to target system. When starting the application via browser I'm getting this error message:
    "Component XXX_BDB is not active"
    But the component is active in source and in target system. When I try to activate the component in target system there comes this error:
    Component XXX_BDB can't be generated because of errors: see long text.
    (Message no. SWDP_WB_TOOL100)
    According to the long text, there is a heavy error and I should check the component in order to eliminate the errors. Checking the syntax is OK and strangely, the component controller is also active. But when I want to start WebDynpro-Component, the error message "Component is not active" is displayed.
    I have checked this thread [Problems when activating ComponentController   |Problems when activating ComponentController; without any effect....
    Does someone have any ideas?
    Thanks in advance,
    Tan

    Hi Thomas,
    where can I check the generation load limit?
    I've done an extended syntax check (in source system, is that okay or should I do the check on both systems?), there are some errors regarding strings, field properties and structure extensions and some warnings regarding field properties.
    But this errors are on an other wd component as well, but this other component is running, so I'm not sure if these errors are crucial. However I'm going to fix the errors now.
    Baskaran, I will check the component controller and component usage as well but how can I identify the errors or should I just check it in general?
    And what about the fact that both applications are running on the source system?
    Additional info: the source system is ECC 6.0, the target system is Solution Manager 7.0
    Thanks
    Edited by: Tan Yildiz on May 4, 2011 9:26 AM

  • Transfer structure not active

    Hi ,
    in my process chain ,  it failed due to   error: Transfer structure is not  active.
    How to correc this?
    iam using BI 7.0
    regards
    sidartha

    Hi Siddartha,
    Try to activate the transfer structure using Pogram RS_TRANSTRU_ACTIVATE_ALL in SE 38. Give the Infosource & Source system name there & then execute.
    Hope this will help.
    ~!Dpak

  • Transfer structure not active after runing RS_TRANSTRU_ACTIVATE_ALL

    Hi BW Experts,
    we are having a migration and just after migration we are finding the the transfer structure is not active. Hence in order to activate the same we ran <b>RS_TRANSTRU_ACTIVATE_ALL</b> program but still in the job log finding some problems like <b>0BP_RELTYPES_TEXT</b> is not available in source system. Kindly help in this regard since this is a critical issue and we are not able to run our daily loads because of this.
    Can any one also tell me if it is a migration problem?
    Thanks and have a nice day.
    Warm Regards,
    Akilesh

    Hi Sriram,
    This is the First time ur loading data from that system, If yes u need to do full extraction steps like transfer data source in RSA5 ..etc.
    After that u need to replicate those DS from their respective sources systems in BW.
    After doing those all actions, then u need to run the program 'RS_TRANSTRU_ACTIVATE_ALL'.
    If u have multiple TS to be activated from one source system ---> u can enter Source system name and put * in Info source column after executing the program, it will activate all transfer structures which are linked to that source system at a time.
    Hope this will help...if you have any plz reply.
    Thanks
    Raja Reddy.

  • Material ledger is not active in valuation area C002

    Dear All,
    I have a Scheduling Agreement for a material 'A' with Vendor 'V' with diff prices with validity dates, I did the GR & when i am posting the invoice thro' miro, system is throwing error as above Material ledger is not active in valuation area C002 Why should I activate the material ledger here ? Pls suggest how can i solve this ?
    regds,
    Kallu

    Hi
    For a Particular material, Material Ledger is active or not? Can be checked in Accountig view of Material Master.
    Why we need Material Ledger?
    A fundamental task of the material ledger is carrying inventories in multiple currencies and/or
    valuations.
    Material inventory values are normally carried by the SAP system in one currency. The material
    ledger component enables the R/3 System to carry inventory values in two additional
    currencies/valuations. Therefore, all goods movements in the material ledger are performed in up
    to 3 currencies or valuations. Currency amounts are translated into foreign currencies at
    historical exchange rates directly at the time of posting. Businesses such as those in highinflation
    countries can therefore carry their inventories in a more stable currency (such as US
    dollars). This reveals inflationary effects on inventory values.
    If you use transfer prices to represent value flows in your company in different
    valuation views, you must use the material ledger. This allows you to carry your
    inventories in three different valuations (legal valuation, valuation for reporting
    purposes, and profit center valuation).
    Before activating the material ledger, make sure you know which currencies and valuations
    you want to use, because you cannot go back and change the setting.
    Activating the material ledger is a prerequisite for using multiple valuations.
    Thanks
    Raman

  • Material ledger is not active in valuation area S001

    Dear All,
    I have created a Scheduling Agreement & did the GR. When I am doing invoice posting system is throwing error as Material ledger is not active in valuation area S001
    What might be wrong here ? For same material if I create PO then everything is working fine. Problem is only with SA.
    regds,
    CB

    Hi,
    Please check your Material Ledger Activation  setting for the Valuation AreaC002 in T-code OMX1. The Check box for the ML activation against the Valuation Area-S001 may be ticked.  After activation/ticking this box, T-code CKMSTART was not executed to complete the ML activation.  If you want the activation of Material Ledger, you have to run T-code CKMSTART to complete this ML activation or Otherwise uncheck this box.  I hope this step will resolve your issue.
    Regards
    appalas

  • NOOK Simple Touch says "Error Dialog: user not activated" whenever I try to open e-books?

    I have had my Nook Simple Touch for about a year now, and I have been using Adobe Digital Editions without a problem. Now, all of the sudden, Barnes and Noble updated my software and I can't read any of my ADE books!! It just says "Error Dialog: User not activated" every time I click on them. I have looked at many other websites and I have tried plugging my nook in to my computer and reauthorizing it, reauthorizing my computer, deleting the digital editions file and .adobe-digital-editions file, redownloading my books, turning my nook off and on, crying, and screaming. The weird thing is, in all the instructions, it says a pop-up box will come up when I delete the files, but it never does. Is that normal? I always have to do it manually by clicking on the gear. I even made sure I "unhid" all the hidden files. I HAVE DONE EACH OF THESE AT LEAST 5 TIMES AND THEY NEVER WORK!!! HELP ME, PLEASE.
    Also, a lot of the websites say to make sure your Barnes and Noble ADE I.D. is the same as the one on your ADE computer I.D.. Is the B&N ADE I.D. different from just the Barnes and Noble ID? Becasue I have been using my sisters email for my computer ADE and my email for the B&N I.D.. Are they supposed to be the same? If so, how come I was able to use it without a problem before?? I tried reauthorizing ADE with my email, because I also have an ADE account with my email, but then it wouldn't let me redownload my books onto the new account. Does this mean I have to change the ADE computer I.D. and wait until my books are available again to read them? Is that the way to fix it? UGH!
    Help is much appreciated.
    P.S. I have ADE version 2.0

    Just to clarify, there are two levels of Authorization -- one for the ADE software and one for the nook. You have to use your Adobe account to authorize both (and they have to be authorized with the same user name). It sounded like your original problem (Kcoline) was with the Nook authorization, and it was the same problem the rest of us were having.
    To get your files back, I suggest carefully reading over the "Activation and Authorization" section of the ADE help. It appears that ADE will automatically find your files but note the "Note" in quoted text below... 
    http://www.adobe.com/products/digitaleditions/help/
    "After activation, any books, magazines, or other documents you previously bought with Adobe Acrobat® or Reader® software are migrated to Adobe Digital Editions. This is usually a relatively quick process. Adobe Digital Editions opens each item and reverifies its license to the user. If you don't have DRM-protected items, you don't need to be online during the migration. If you have a large number of items (for example, more than 100), then this process may take a while, but you will see a progress bar indicating the state of the migration as it proceeds.
    Note: Items that you previously borrowed from a public library with Adobe Acrobat® or Reader® software are not migrated to Adobe Digital Editions. You need to return the library item and then borrow the item again with Digital Editions."
    If it's not finding your files, it may be because they're located in a folder different from the one that ADE is trying to use to find them.
    You may also want to check the "Transferring items between computers" section, as this describes where the files should be located, and how to reimport them into your library.
    Good luck!

  • Material is not activated error in MM

    Hi,
    We'vs installed SAP IDES in our Landscape recently. Whenever I tried to create a new material using MM01 transaction code, it creates. But then when I tried to view the same in MM03 or MM02 it throws an error of the following,
    The material XXXXX does not exist or is not activated
         Message no. M3305
    I'm unable to diagonis the problem properly. Will appreciate your help.
    Thanks,
    Rajesh Manoharan

    >
    Kishore Kumar Chiluka wrote:
    > Hi
    >
    > Please get in touch with your BASIS consulatant , as the updates are not performing rightly, this seems to be asystem error.
    >
    > Thanks & Regards
    >
    > Kishore
    Thanks a lot Kishore.
    But unfortunately we don't have any Basis Guy separately. I was doubling up as Basis as well APO in my org . I'm pretty new to all these stuff. I searched in help.sap.com about this a lot, but couldn't find anything useful.
    Can you help me in identifying a solution to this problem?
    Thanks,
    Rajesh Manoharan

  • Shrink database is not active in SQL SERVER Enterpriser manager

    Dear guru
    Shrink database is not active in SQL SERVER Enterpriser manager what to do
    Rupesh
    SAP BASIS Consultant

    Hi,
    >Thank you very much for not supporting i have solved the problem by reading some other documents
    That's exactly what I wanted you to do : With a little personal work, you can actually learn to do your own work ! "Don't give fish to hungry people. Teach them how to go fishing !"
    Regards,
    Olivier

Maybe you are looking for