DTP Types..?

Is there not Init DTP, is it only full and delta because thats what I see when I open up a DTP.
So no need of any initialization in the case of DTP?

Hi Gurus,
I have a basis doubt..
I am running a process chain daily with FUll and DELTA in DTP..
Though its Delta, it is taking the same time as FULL.. May I know what is the reason for this.. I have not kept any options in the DTP Selection.. What option should I take.. If I am not selecting any option what it takes automatically
Thanks in advance
Hari

Similar Messages

Rtp from Business rule to be passed as template parameter using Member Range DTP type

This is what I am trying to do. Use a template to define a part of the code and restrict the code from running for a particular Month. I have created a member range DTP and defined default values in it to exclude the one month I do not want.
I have set up the template in my rule as given below and basically the parameter that is to be passed is a runtime prompt (rtp_Month), which I have selected.
%Template(name:="Test",application:="XXXX",plantype:="Plan1",dtps:=("StartMonth":=([[Period.{rtp_Month}]])))
Now when i run this, what will happen? Will the rule just skip the template part when rtp_month is the one i have excluded in the member range?
OR, is this not the way to do what i am intending. I see a 'restricted value' type, but not sure how to get it to work.
Thanks in advance.

Thanks for the reply Sree.
This is what I am trying to do.
FIX ({rtp_StartMonth}:Aug)
Calculations
ENDFIX
FIX(Sep)
Calculations
ENDFIX
Now, when rtp_Month is selected as Sep, the first block of code should not run. So the template I created has the first fix block like,
FIX ([Startmonth]:Aug)
Calculations
ENDFIX
So, final BR code:
%Template(name:="Test",application:="XXXX",plantype:="Plan1",dtps:=("StartMonth":=([[Period.{rtp_Month}]])))
FIX(Sep)
Calculations
ENDFIX
I am assuming: if i use the range DTP type and exclude 'sep' while defining the default values, the rule would bypass the template and run my second block of code.
Is this assumption wrong?

Problem Creating VirtualProviders Based on the DTP

Problem Creating VirtualProviders Based on the Data Transfer Process .
(1) I have created an Data Source(extract structure and extractor) on SYS1. Tested the extractor. It returns data as desired.
(2) Then I replicated this Data Source to SYS2.
(3) In SYS1 I created InfoCube(VirtualProvider based on data transfer process for direct access) .
Till this point I have no issues .
(4) But after that I am not able to "Create Data Transfer Process" for this Virtual Infoprovider . When I try to create DTP the DTP type available for selection is "Scheduled" where as per the documentation I need to create DTP of DTP type "DTP for Direct Access".This DTP type I donot see.
Is it a problem with the BW configuration or some user error.Any suggestions which may help would be realy appreciated.
Thanks & Regards,
priyadarshi

Corrected some typo in my earlier update...
Problem Creating VirtualProviders Based on the Data Transfer Process .
(1) I have created an Data Source(extract structure and extractor) on SYS1. Tested the extractor. It returns data as desired.
(2) Then I replicated this Data Source to SYS2.
(3) In SYS2 I created InfoCube(VirtualProvider based on data transfer process for direct access) .
Till this point I have no issues .
(4) But after that I am not able to "Create Data Transfer Process" for this Virtual Infoprovider . When I try to create DTP the DTP type available for selection is "Standard(Scheduled)" where as per the documentation I need to create DTP of DTP type "DTP for Direct Access".This DTP type I donot see.
Is it a problem with the BW configuration or some user error.Any suggestions which may help would be realy appreciated.
Thanks & Regards,
priyadarshi

Differences in DTPs BI7 when compared to InfoPackages in BW3.x

Hi,
What better features are available in Data Transfer Process (DTPs) in BI7.0 when compared to InfoPackages in BW3.5?
Why SAP recommended you must use especially InfoPackage to load data to PSA/DS in BI7.0 why not in other places like to load PSA to DSO, InfoCube? What the best features are there in DTPs to load data?
What DTP type is recommended the most and why? Could anyone help me in this.
Thanks,
Reddy

Hi Reddy,
In 3.X infopackages are to upload data to psa and data targets.
In 7.0 now Infopackages are using to load data upto PSA only
DTP is to load data from One Bi object to Other Bi object
I.e Data source --> data target or Data Target --> data target
which replaces the DATA MART concept
we have 4 type of DTP
1. Standard DTP
2. DTP for Realtime data acquisition (RDA)
3. DTP for Direct data access(virtual provieders only)
4. Error DTP(if get any errors ,while loading data to the data targets)
Please refer these:
SAP Network Blog: SAP NetWeaver 7.0 BI: Data Transfer Process (DTP) / Blog Series
SAP NetWeaver 7.0 BI: Data Transfer Process (DTP) / Blog Series
'Error DTP' - BI@2004s
SAP NetWeaver 7.0 BI: Data Transfer Process (DTP) / The Normal DTP ...
How-To write DTP dependant mapping/routines within the same Transformation
SAP NetWeaver 7.0 BI: Get runtime information of a Data Transfer Process (DTP) in a Transformation
SAP NetWeaver 7.0 BI: Extended Capabilities to Debug a Data Transfer Process (DTP) Request
SAP NetWeaver 7.0 BI: Data Transfer Process with Get Data by Request
SAP NetWeaver 7.0 BI: Data Transfer Process with Only get Delta Once
refer these links also :
http://help.sap.com/saphelp_nw04s/helpdata/en/42/f80a3f6a983ee4e10000000a1553f7/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/42/fb8ed8481e1a61e10000000a422035/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/42/fbd598481e1a61e10000000a422035/content.htm
hope this will help you.....
Thanks
chandra sekhar
Edited by: chandra sekhar on Nov 2, 2008 7:31 AM

DTP Born with Incorrect Real-Time Status

Hi Gurus,
What am I doing wrong? When I create a DTP for Real-Time Acquisition, I am getting "Real-Time Status" as "Incorrect" even with a DTP Type correctly set for Real-Time. I have no option to change it for following status:
- New, Without Data Package
- Ready
- Transport Package Read
- Transport Package
- New Transport Package to be Deleted
- Stopped
- Active
- DTP/Infopackage to be closed
I am having quiet few problems to set up DTP with Real-Time Data Acquisition.
Kind Regards,
Gilson

Hi
Not a Guru ,but wanna give it a shot..
Prerequisites for creating Infopackages -
Check
1)The DataSource for which you want to create an InfoPackage supports real-time data acquisition.
2)If you are transferring data into BI using the service API, you have already created an InfoPackage for initializing the delta process for this DataSource, and have completed the initialization.

Closing Requests in the Monitor for Real-Time Data Acquisition
Prerequisites
The daemon is inactive or has errors.
Procedure
In the context menu of the PSA or DTP request, choose Close Request
Barring all those steps mentioned above if I copy you properly ,I put 2 cents on the authorization issue related to RDA.
Check OSS note- 943898
IF at all the note applies to you ,since the patch is not released ,have to go ahead with correction instruction.
Hope it Helps
Chetan
@CP..

Error while activating transformation ---- Message no. RSTRAN510

Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on ECC 6.0 , BI 7.0.
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
here I have some doubt
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
Is it Right way For create InfoCube ?
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
Cannot generate proposal
Message no. RSTRAN017
Then I try to activate, I got the Error.
Error while activating transformation
Message no. RSTRAN510
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like Basis Guy need to install any Patch or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasanna

Thank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step creating DTP
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
Object Type : Info cube
Name : YSTU (This is my Cube Name)
Source of DTP
Object Type : Data source (It automatically Taken)
Data source : This is Disabled
Source system: This is Disabled
continue (Enter)
I got the message ?
Specify Name of source
and courser is in Data Transfer Proc 
Thanks
prasanna

Issues in Data Transfer Process

Hello All,
After creating transformation from Infosource to InfoCube, now i am trying to data transfer process.
In DTP Type it displays "DTP for direct process", but i need DTP type as Standard(Can be scheduled).
Its giving me an error as "Source does not support direct access"
Could any one help me to solve this error.
Thanks in advance
Regards,
Nithin

Hi,
You can only use the type DTP for Direct Access as the target of the data transfer process for a VirtualProvider.
Check the below links
http://help.sap.com/saphelp_nw04s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/42/fb8ed8481e1a61e10000000a422035/frameset.htm
Regards
KP
Edited by: prashanthk on Jan 19, 2011 5:15 PM

Creating a folded card

As a long-time Windows user, I have in the past created many greetings cards and "brochures" using MS Publisher which has an option of a publication layout to produce book-fold publications where I can produce four pages, and then print pages 4 and 1 side by side, and then 2 and 3 on the reverse side (and then fold it like a greetings card).
I am a fairly new Mac user and seeking an alternative to MS
Publisher and have been testing out the trial version of Pages (v.1.0.2) on a real brochure which I have a need to produce and I just cannot get it to do this logically. I have set the document to print two pages side by side, but I have to lay it out with my back page as page 1, then my front page as page 2. If I then set the layout to be facing
pages in order to set inside and outside margins, the pages re-arrange themselves into a different order! The Help files say that odd pages will always be on the right hand side. So - I then reset my pages back to their logical order, and sure enough page 1 is then on the right, followed by 2 and 3 side by side, followed by 4 on the left. However, there is then no way I can then print 4 and 1 side by side, followed by 2 and 3.
I have tried this with all pages in separate sections, and with all pages in one section, and with pages 2-3 in one section, but it makes no difference. I can of course go back to calling page 4 page 1 as above, and that works fine provided I don't want my pages numbered, but it seems a very basic need for anyone trying to use a simple DTP type program. Is there any way to do this? I have read the thread headed "Newby trying to make booklet" posted on 17th January and the answer seems to be that the only way is to export the document to PDF and use a booklet program to print from. This seems crazy!
I would be really grateful for any help, even if it's to say - stop looking - you can't do it. (And in that case is there a good simple not-too-expensive DTP program for the Mac that would do what I want?)

Hello Sally,
welcome to the Pages Discussions. The easyst way to
have a "four-pager" by one fold is, to have a
document with only two sheets. Create page 1 and page
4 on the first sheet and the pages 2-3 on the second
sheet of the document. You have to set the paper size
in Pages to landscape, than you can fold the sheet
after printing.
But if you want to have more then a "four-pager" (and
not a many folded flyer), you have to use the
solution David mentioned.
Thank you Frank. This is the solution I had ended up with, which does work, but really it is as I guessed, and there is no automatic way.

Error Validating Business Rule in Calculation Manager (@_AT) ?

I have migrated an 11.1.1.3 business rule and two macros (templates) into Calculation Manager 11.1.2.2. When I validate the script I get the following error. Has anybody seen this before or have any guidance? The script syntax checks ok.
"An error occurred in: Rule:FCO_3YrBud_DGAlloc Error:Error parsing formula for [FIX STATEMENT] (line 24): Expected [(] found [@_AT] after function name Rule FCO_3YrBud_DGAlloc "
Line 24 is the first FIX statement in the script show below:
SET UPDATECALC OFF; SET AGGMISSG OFF;
%Template(name:="FCOm_TargetSection",application:="FCO",plantype:="FCO",dtps:=("parm1":=([["Three Year Budget"]]),"parm2":=([["DGAllocation"]]),"parm3":=([[{FCOrtpYears}]]),"parm4":=([[Mar]])))
%Template(name:="FCOm_TargetAgg",application:="FCO",plantype:="FCO",dtps:=("parm1":=([["Three Year Budget"]]),"parm2":=([["DGAllocation"]]),"parm3":=([[{FCOrtpYears}]]),"parm4":=([[Mar]])))
First template:
SET UPDATECALC OFF; SET AGGMISSG OFF;
FCOm_TargetSection
parm1 = scenario
parm2 = version
parm3 = years
parm4 = periods
The purpose of this macro is to translate Target input to GBP and copy to Curr NA and aggreggated. Step1: Copy inputs to Total Section to I/P Total Section and No Project Step1: Copy inputs to Converted Currency - no need to translate as all inputs are in GBP Step2: Copy Input GBP values to Curr NA
FIX(([["Three Year Budget"]]),([["DGAllocation"]]),([["FY15"]]),([[Mar]]),@IDESCENDANTS("BH - T"), "Curr NA", "Baseline","Entered Currency","A - 6111","A - 6112","A - 6113","A - 65","A - 66","A - 620905")
DATACOPY "Total Section" TO "Input_Total Section";
DATACOPY "Total Section" TO "No Project";
ENDFIX
FIX(([["Three Year Budget"]]),([["DGAllocation"]]),([["FY15"]]),([[Mar]]),@IDESCENDANTS("BH - T"), "Curr NA","Total Section", "Input_Total Section", "No Project","Baseline","A - 6111","A - 6112","A - 6113","A - 65","A - 66","A - 620905")
DATACOPY "Entered Currency" TO "Converted Currency (GBP)";
ENDFIX
FIX(([["Three Year Budget"]]),([["DGAllocation"]]),([["FY15"]]),([[Mar]]),@IDESCENDANTS("BH - T"), "Total Section","Input_Total Section","No Project", "Baseline", "Entered Currency","Converted Currency (GBP)","A - 6111","A - 6112","A - 6113","A - 65","A - 66","A - 620905")
DATACOPY "Curr NA" TO "Input GBP";
ENDFIX
Second template:
FCOm_TargetAgg
parm1 = scenario
parm2 = version
parm3 = years
parm4 = periods
The purpose of this macro is to aggreggate Target data Step2: Aggregate data
FIX(([["Three Year Budget"]]),([["DGAllocation"]]),([["FY15"]]),([[Mar]]),"Baseline","Entered Currency","Converted Currency (GBP)")
CALC DIM("Account","BudgetHolder","Input Currency","SectionProjects");
ENDFIX

Actually
I have just been re thinking about your post. My comments above may not be correct for your situation. The Syntax above is correct if you are talking about the code "within" the template itself (So if you open the template and look at the code). But if the code you posted in your messages was from the script window of the rule (When in script mode) then your problem is something different potentially.
So the first thing is to make sure that in the template itself (template open) the DTPs are defined in the global range or member range as [Parm1],[Parm2] etc (Or fix, depending on how the template is shown) as I said in my first response above, the template only defines the DTP, not the members and should be enclosed in square brackets, like [Parm1}. That will make sure the DTP as defined in your template correctly. Then we need to look at how you are defining those DTPs in the rule itself. Normally this is a lot easier if your rule is in graphical view, as you just click on the template and your can enter the values. As you have your rule in Script mode you need to be very careful in how you define the DTP values. Each DTP 'type' has different syntax in script mode.
On looking at your script again I can see another problem potentially. When defining the values in the DTP's, the value needs enclosing with double square brackets, like so [["Three Year Budget"]]. In your script you also have parenthesis. Which isn't always correct. There are times having parenthesis and double brackets is correct, but that is only when your DTP is type "Members", and by default I think old business rule macros will be translated into templates with the DTP types of "Script"
So if you also amend your business section where the templates are defined to as below; (as you can see, no parenthesis around the DTP values).
SET UPDATECALC OFF; SET AGGMISSG OFF;
%Template(name:="FCOm_TargetSection",application:="FCO",plantype:="FCO",dtps:=("parm1":=[["Three Year Budget"]],"parm2":=[["DGAllocation"]],"parm3":=[[{FCOrtpYears}]],"parm4":=[[Mar]]))
%Template(name:="FCOm_TargetAgg",application:="FCO",plantype:="FCO",dtps:=("parm1":=[["Three Year Budget"]],"parm2":=[["DGAllocation"]],"parm3":=[[{FCOrtpYears}]],"parm4":=[[Mar]]))
The end game should be that when you open your rule and view in script mode and then select script tab down the bottom your templates should look as below, as you will see, all that should be shown in the script are the values substituted from the template definition, key point is that there are no brackets or Parenthesis. The script should show "pure" script. ( I have highlighted and underlined how those 4 DTPs should translate in the script view)
First template:
SET UPDATECALC OFF; SET AGGMISSG OFF;
FCOm_TargetSection
parm1 = scenario
parm2 = version
parm3 = years
parm4 = periods
The purpose of this macro is to translate Target input to GBP and copy to Curr NA and aggregated. Step1: Copy inputs to Total Section to I/P Total Section and No Project Step1: Copy inputs to Converted Currency - no need to translate as all inputs are in GBP Step2: Copy Input GBP values to Curr NA
FIX("Three Year Budget","DGAlocation",FY15,Mar,@IDESCENDANTS("BH - T"), "Curr NA", "Baseline","Entered Currency","A - 6111","A - 6112","A - 6113","A - 65","A - 66","A - 620905")
DATACOPY "Total Section" TO "Input_Total Section";
DATACOPY "Total Section" TO "No Project";
ENDFIX
FIX("Three Year Budget","DGAlocation",FY15,Mar,@IDESCENDANTS("BH - T"), "Curr NA","Total Section", "Input_Total Section", "No Project","Baseline","A - 6111","A - 6112","A - 6113","A - 65","A - 66","A - 620905")
DATACOPY "Entered Currency" TO "Converted Currency (GBP)";
ENDFIX
FIX("Three Year Budget","DGAlocation",FY15,Mar,@IDESCENDANTS("BH - T"), "Total Section","Input_Total Section","No Project", "Baseline", "Entered Currency","Converted Currency (GBP)","A - 6111","A - 6112","A - 6113","A - 65","A - 66","A - 620905")
DATACOPY "Curr NA" TO "Input GBP";
ENDFIX
Thanks
Anthony

Steps for creating a SAP Remote cube.

Hello Experts,
Can you anyone list the steps for creating a SAP Remote cube please?
Any step by step guide will be of really great help.
Thanks in advance.
Regards,
Kumar.

Creating VirtualProviders Based on Data Transfer Processes Locate the document in its SAP Library structure
Prerequisites
If you are using a DataSource as the source for a VirtualProvider, you have to allow direct access to this DataSource.
Procedure:
       1.      In the Data Warehousing Workbench under Modeling, choose the InfoProvider tree.
       2.      In the context menu, choose Create VirtualProvider.
       3.      As the type, select VirtualProvider based on data transfer process for direct access.
In terms of compatibility, a VirtualProvider that is based on a data transfer process with direct access can also be connected to an SAP source system using a 3.x InfoSource.
The Unique Source System Assignment indicator controls whether this source system assignment needs to be unique. If the indicator is set, you can select a maximum of one source system in the assignment dialog. If the indicator is not set, you can select multiple source systems. In this case, the VirtualProvider acts like a MultiProvider.
If the indicator is not set, characteristic 0LOGSYS is automatically added to the VirtualProvider when it is created. In the query, this characteristic allows you to select the source system dynamically: In each navigation step, the system only requests data from the assigned source systems whose logical system name fulfills the selection condition for characteristic 0LOGSYS.
       4.      Define the VirtualProvider by transferring the required InfoObjects. Activate the VirtualProvider.
       5.      In the context menu of the VirtualProvider, select Create Transformation. Define the transformation rules and activate them.
       6.      In the context menu of the VirtualProvider, select Create Data Transfer Process. DTP for Direct Access is the default value for the DTP type. Select the source for the VirtualProvider. Activate the data transfer process. See Structure linkCreating Data Transfer Process for Direct Accesss.
       7.      Activate direct access. In the context menu of the VirtualProvider, select Activate Direct Access. In the dialog box that appears, choose one or more data transfer processes and select This graphic is explained in the accompanying text Save Assignments.
Check this for little extra info:
/thread/142088 [original link is broken]

While executing in DTP, Conversion Type missing

Hello Sir:
I can see my data is loaded OK in PSA through infopackage. While executing DTP, I get the error "CONVERSION TYPE MISSING" for my keyfigure. any idea for the error, and its fix
Regards

hi mark,
u should have created transformation rule .
1.go to transformation rule.
2.u will have 2 tables one for source second for target table.
3.two tables would be mapped one u give the data source right.
4.here go to that infoobject that asks for the stated error.
5.click the group rule for that infoobject.
6.u find a pop up having conversions from source to target specify wat ever conversion u need and check it out.
if error still persists .
check for u r infobject is it a fixed currency/uom.
try to write a routine for the target conversion in start routine .
thank u.

Differences between the types of DSO's and DTP's

Hi Friends,
1. pls help me in telling different types of DSO's and their differences?
2. pls help me in telling different types of DTP's and their differences?
Thanks in Advance.
Jose Reddy

Hi,
Please check :
1. pls help me in telling different types of DSO's and their differences?
There are three types of DSO in BI 7.0........
Standard DSO
It consists of three tables.......activation queue,active table,and change log table.....It is completly integrated in the staging process.....Using change log table means that all changes are also written and are available as delta uploads for connected data targets.......
Write optimized DSO
It is integrated for warehouse level of architecture..........and has the advantage of quicker loads.has only active data table .(with delta capture capability) ...... SIDs are not generated
Check this :
http://www.biportal.org/Default.aspx?pageId=90410&mode=PostView&bmi=17541
Direct update DSO
It consists of active data table only. This means it is not easily integrated in the staging process...SIDs are not generated ......This DSO type is filled using API and can be read via BAPI......It is generally use for external application and APD...
Also check this :
http://help.sap.com/saphelp_nw04s/helpdata/en/f9/45503c242b4a67e10000000a114084/content.htm
2. pls help me in telling different types of DTP's and their differences?
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10339304-7ce5-2c10-f692-fbcd25915c36
-Vikram

Types of DTP , Diff between Standard and Error DTP

Hi experts,
What is DTP , are the Types of DTP , Diff between Standard and Error DTP , how it works in BI 7.0.
I will assign points for your valuable answers.

Hello ,
Data transfer process (DTP) to transfer data within BI from one persistent object to another object, in accordance with certain transformations and filters. In this respect, it replaces the data mart interface and the InfoPackage. As of SAP NetWeaver 7.0, the InfoPackage only loads data to the entry layer of BI (PSA).
The data transfer process makes the transfer processes in the data warehousing layer more transparent. Optimized parallel processing improves the performance of the transfer process (the data transfer process determines the processing mode). You can use the data transfer process to separate delta processes for different targets and you can use filter options between the persistent objects on various levels. For example, you can use filters between a DataStore object and an InfoCube.
Data transfer processes are used for standard data transfer, for real-time data acquisition, and for accessing data directly.
1.Benefit: Data Distributionwithin BI Capabilities (from PSA or InfoProviders to InfoProviders)
2.Improved transparency of staging processes across data warehouselayers (PSA, DWH layer, ODS layer, Architected Data Marts)
3.Improved performance and high scalability
4.Separation of delta mechanism for different data targets: delta capability is controlledby the DTP
5.Enhanced filtering in dataflow
6.Repair modus based on temporary buffers (buffers keep complete set of data)
See these docs for more info
[Data Transfer Process |http://help.sap.com/saphelp_nw04s/helpdata/en/42/f98e07cc483255e10000000a1553f7/content.htm]
[Enterprise Data Warehouse (EDW)|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/67efb9bb-0601-0010-f7a2-b582e94bcf8a]
[What's New with SAP NetWeaver 2004s - Detailed|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3]
[SAP NetWeaver 7.0 ETL and EII|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b24053-654e-2a10-4180-b0e7c7b4c9f2]
[How to Create Monitor Entries from a Transformation Routine (NW7.0)|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50fda171-e36e-2910-9290-e3dab26c50b5]
FAQ on SAP NetWeaver 2004s
[Modeling the Enterprise Data Warehousing for SAP NetWeaver 2004s FAQ|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7c2a7c65-0901-0010-5e8c-be0ad9c05a31]
[Enterprise Data Warehousing for SAP NetWeaver 2004s FAQ|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c9f5fb91-0c01-0010-67a8-fd35946e9403]
Thanks
Chandran

DTP error: Type conflict when calling FM - after transport to Prd

Hi ,
i have asset_attr datasource.it was working in my BW dev.
however after transport to BW prod. when i try to upload data using DTP it gives me an Abrupt error
"0ASSET_ATTR IPDCLNT030 : Type conflict when calling a function module (fiel
Message no. RSDS666"
no more information is given, & the request ends in red.
This is first time i'm using this Infoobject upload.
however all my other transaction data & other master data all are getting uploaded fine.
even Asset_text datasource is working fine.
Did anyone face similiar probs ?
can anyone guide me on this error ?
thanks
ramesh

Hi
Take a look at note 1130907.
Regards,
Chandu.

Help. I'm trying to create a DTP for 0INDUSTRY texts

I'm trying to create a DTP for 0INDUSTRY (texts), but when I assign the DataSource (0INDUSTRY_TEXT), it shows me the next error message: "Target 0industry (type IOBJ) is not active".
Of course I've checked 0industry and it is already active!
I have the same issue with several characteristics.
Do somebody knows what can I do?

Hi,
Try comin out of rsa1 transaction and then going back in...else login and logoff. Its generally happens that the changes dont get reflected and it then shows that error.
assign points if helpful
Regards.

DTP Types..?

Similar Messages

Maybe you are looking for