Dtrace Script to Generate List of Files that Changed on NFS server?

Our Solaris NFS (v3/v4) fileserver serves filesystems with a huge number of files, a relatively few of which are modified daily. Is there a dtrace script I can run on the server which would generate a list of the files that were created or modified while it was running?

Well, write something based on the rwsnoop from dtracetoolkit
http://www.dtracebook.com/index.php/File_System:rwsnoop
Then i guess we should ask ourself if its a good idea for a long term monitoring.. probably not.
.7/M.

Similar Messages

After I've heard an audiobook downloaded from the public library, how do I delete it from the Shuffle? When I plug it into my computer, I get a screen showing how much space is left on the Shuffle but no list of files that I can delete. WRA

After I've heard an audiobook downloaded from the public library, how do I delete it from the Shuffle to make room for other audiobooks? When I plug it into my computer, I get a screen showing how much space is left on the Shuffle but no list of files that I can delete. These books, incidentally do not appear in the ITunes screen. WRA

Select the iPod shuffle in the iTunes sidebar (under DEVICES). If this is a current 4th (or 3rd) gen iPod shuffle, you should be able to see the contents of the shuffle by type, intented under the shuffle's name (still in the sidebar). Select Music or Audiobooks (not sure where those items from the library will be listed). The items will be listed to the right, for each category. Find the items, select, and delete.
It's on page 20 of the manual
http://manuals.info.apple.com/en_US/iPod_shuffle_4thgen_User_Guide.pdf
NOTE: If this is an 1st or 2nd gen iPod shuffle, select the iPod shuffle in the iTunes sidebar (under DEVICES). Over to the right, go to the Contents tab, where the items are listed. Select and delete them from this list.
I find it more convenient to make a playlist in iTunes with things I want to put on the shuffle. I then set up automatic syncing (or use autofill) to have iTunes load the shuffle from that playlist, automatically.

Where is the list of files that the migration assistant was unable to copy located?

The Migration Assistant successfully finished transferring most of my information between my old MBP and my new rMBP, even thought the "less than a minute remaining" actually took several hours, even using Thunderbolt cables.
At the end of the migration, the Migration Assistant displayed a message "not all of your files could be transferred".
Where is the log containing the list of files that couldn't be transferred?
The only system log entries relating to the migrations system are of the "2/27/15 9:17:14.000 AM kernel[0]: Process systemmigrationd [546] disabling system-wide CPU Throttling" variety.

>> Once I know what those numbers represent
I would suspect--though I don't know for certain--that the hyphenation-marking digits work as in other UNIX programs. Here are two leads:
http://lists.gnu.org/archive/html/groff/2001-03/msg00026.html
http://www.helsinki.fi/~tapirine/publications/Pirinen-cla-2010.tex
Search them for "odd" or "even" to get started. Good luck.

Updated to 10.4.5 and I get a long list of files that permisissions have ..

Updated to 10.4.5 and I get a long list of files that permisissions have changed and the list remains each time I repair permissions, is there a way to get rid of this long list, is there a way to delete this log of permissions info. So that when I run Disk Utility only the latest issues are shown?
Sebastian

See this post;
Cheers!
DALE
p.s. There is no way to change the way it does permissions as far as I know from following the topic here.

Sql loader issue(How to specify a file that exists on remote server)

In sqlldr infile parameter I'd like to give a data file that exists on remote server.How can I specify???Please help me in the syntax.
Any help would be greatly appreciated.
Edited by: 792353 on Sep 24, 2010 7:22 AM

sqlldr can accept any path that is VALID and it can be any type of share as long as the OS supports the share.
so INFILE can be anything you want as sqlldr will simply attempt to access it via the OS.
if you are on a linux box going to another linux box with an NSF mount point on the box running sqlldr simply reference:
INFILE '/mountpoint/fname'
Now I have never tried a UNC path before but I would guess that if you are on a windows box, going to another winddows box and the box running sqlldr was logged in with the right permissions it would simply be:
INFILE '\\server\directory\file'
I doubt that it will accept a URL as in:
INFILE '//servername.com/directory/file'
I don't think that sqlldr does anonymous ftp or htp file transfer protocol, but I could be wrong.
NOTE: I have found that it is best to ALWAYS surround your INFILE parameter with single quotes.

Generate list of files /Items in a folder

Hi,
I have a folder lets say Root. This root folder may have several folders and files.
My target is to generate list of all items in this Root folder that list the all folders and items in that subsequent folders (showing path
The output may be an HTML table with item number, physical path etc.
Is it possible?
N.A.Malik

yes, it can be formatted. Simple content changes are easy:
Get-ChildItem c:\root -recurse | Select * | ConvertTo-Html | Out-File files.html
If you only want some of the values, replace the "*" with the column header names (in the order you want them).
More complex html reformatting will take some effort though.
Cheers,
Fred
There's no place like 127.0.0.1
Hi,
Thanks for the reply. I appreciate your help.
Unfortunately this is not what I was looking for. I am looking for something similar:
OR I want to make a table with .PNG file extensions and its full path under a root folder.
Number
File Name and Path
Date Created
File Size
1
D:\MyFolder-Root \Abcdefgh-1.png
2014-03-25
10 K
2
D:\MyFolder-Root \Abcdefgh-2.png
2014-03-22
3k
3
D:\MyFolder-Root \Abcdefgh-3.png
2014-03-22
6k
4
D:\MyFolder-Root\SUBFolder1\12345.png
2014-03-22
20k
5
D:\MyFolder-Root\SUBFolder1\12345-a.png
2014-03-22
34K
D:\MyFolder-Root\SUBFolder1\ChildofSubFolder1\XYZ.png
2014-03-22
39K
400
N.A.Malik

Is there a way to automatically sort/filter the itunes music list by files that cannot be located?

I have quite a lot of files that can't be located, and want to delete them all at once rather than clicking on everyfile to choose delete. Does anybody know of a way to sort the itunes listing so that I can group them all together to delete, or a way to automatically purge them all from the itunes file?

But is there a way (simple or not-so-simple) to find
out EVERY SINGLE FILE that's referenced on a
timeline? (I have lots of stuff imported into the
project that I know isn't used on any timeline, but
I'm afraid of moving or deleting things for fear of
never finding it again.)
I'd love to get some sort of "printout" (a list or
something) of every single file.
There is, go to browser and cntrl click on any one of the columns,
and select - show/source. A new column named "source" will pop up and will show where everything "lives". Click on the header at the top and it will justify the column as well. You'll notice this won't show anything for your seq.'s. of course, but will show stills/audio/motion files...
Once you have the new column, you can drag it next to the "name" column and get a grab of it and print it if you like, or whatever.
If you want to do this for just 1 seq., then can create a new bin and double click it to open it. Cntrl-A (select all) in your main seq. and just drag all into the new bin. You will see only what's in that seq. with the "source" column right next to it.
From what I've read, you seem to get the MM thing and it's obviously what you'll need to do to archive as the guys said. But what your missing is a file path system to where everything resides.
Hope this helps and that I've read you properly,
Peace
P-Book 1.5, 17" 2gsRAM Mac OS X (10.4.4) FCStudio

Illustrator CS4 - frequently generates corrupt EPS files that will not parse

I have used many versions of Illustrator prior to and including the CS lines. I am currently running CS4 and this is the first time I have experienced this issue. Approximately half of my EPS formatted illustrator files will not parse. I use Quark Xpress 7 for my layout (never liked any of the Indesign programs). If I try to generate a PDF with my CS4 generated EPS files placed at least 60% of the time the placed file will corrupt the PDF export resulting in no PDF being generated.
Further to this PDF export issue, if I attempt to parse the same EPS file into Photoshop, Photoshop will give me the error message "Could not complete your request because Photoshop was unable to parse the PostScript" and it will abort the attempt to open the file.
Anyone else having Illustrator EPS file issues?
Background info (if needed) Dual 2.0 Ghz, PowerMac G5, 8 gb RAM, running Tiger 10.4.11
I have attached a sample Illustrator file that will not Parse. It will open in Illustrator but not parse into Photoshop or if placed in Quark will not parse and allow for a PDF to be exported.

Thanks for taking the time to write Steve.
I understand that I can drag and drop between programs. Ultimately, when attempting to parse an EPS in photoshop I am merely doing it to confirm that the EPS is indeed corrupt.
As mentioned previously, I predominately use Quark Xpress for my page layout program and until I installed CS4 I have had zero complications with using EPS files. Now I quite commonly can not export PDFs due to corrupt EPS files.
My question to the public is I am alone in this glitch or do others experience the same issue. My first thoughts are that CS4 has a glitch and I should be expecting an update in the near future. But, if I am the only person suffering from this issue than maybe I should be looking at my own software.

Generate list of contents that were published

Hi,
Is there a way to find out a list of contents that were published, lets say everday etc? Or is there a way it can be achieved through some scripting? Please advise.
Thanks

Hi,
Thanks for the info. I tried creating a copy of Page Activation Report by setting root path to /var/audit/com.day.cq.replication.
To test it, I activated a content and ran the report. It is showing past data but not the latest one that I activated.
I am new to CQ. I am not sure how to use it exactly. When I click on "Finish", it throws an alert saying "The report doesn't contain any grouped colums. Please ensure atleast one column is grouped before clicking Finish"
Also, let me explain what exactly I am trying to achieve. I want to pull an hourly list of content that is published and send it through email.
Any further info that you can provide will be of great help.
Thanks in advance.

Sql script for uploading multiple .rdl files in to the reporting server

Hi,
I have multile .rdl files in my local path.i have to upload those .rdl files in to the repoting server single attempt using sql script.
please help me on this issue.
Thanks & Regards,
Muni

I am aware of three different options. RS.exe, Working with the APIs (i.e., CreateCatalogItem) using custom code like C# or PowerShell, or using BIDs.
Here's a good link on the first two items:
http://msdn.microsoft.com/en-us/library/ms159720.aspx
You could also add each report to a BIDs project and deploy that way. I don't think Microsoft will support any other methods, like using a SQL Script.

How to download the files, that are located in server, from the client?

Hello folks,
My program is like that, the files are located in the server and stored in file system.
I can only know the server name and the directory listing, so that I can show the file names from that directory on the browser.
The user might downloads those files from the browser and he might deletes those files through the browser.
That user has valid right to do so and the files can be any type of extension.
So how can I write this kind of program? Currently the whole system is in struts, so how can I make compatible with struts technology?
Do u have any ideas?
Regards,
Phyo

Thank you, grigpm. But actually I want the user to select the file that he wants to download rather than setting it in the configuration file. If it is possible, let me see the sample code of FileManager servlet. I've tried with some ways but I can only download from the same server with the application server. I want to download from different server. I hope someone can help me with sample code....
Best regards,
Phyo

How to convert RAW files that saved in UCCX server to wav file?

Hi all,
How we can covert the RAW files that are saved in UCCX server to wav file by using command prompt in UCCX servers. Or is there some other way? So that we should be able to hear the sound of these files.
C:\Program Files\Cisco\Desktop_Audio
Regards
Ali Raza

Hi,
I use Switch File Audio Convertor from NCH Software to do this.
It is a commercial product but there is a time limited evaluation and if you decide to keep it it is only $30.
http://www.nch.com.au/switch/index.html
It is great for converting audio files to the correct format for music on hold as well.

Cannot save or open .ai files that's on a server.

Hello everyone,
My office upgraded to CS4 few month ago, and I am having problem saving and opening AI files. It seems like a server problem but I'm not sure because my co-workers can save and open file without problem. We are using exact same computers with exact same settings.
I can save and open AI files no problem when they are saved on the computer that I used to create the file. However, when I try to save the file to the server, which is a computer on the same network, Illustrator gives me an error massage saying "This file may be read-only, or another user may have it open. Please save the document with different name or in a different folder." No one else has the file open (because I just made this file) and it is not read only. When I click on "OK" Illustrator creates a AI file that is 0 KB in the folder where I was trying to save. If I try to open this file, another error massage "The file 'test.ai' is in an unknown format and cannot be opened"
I can save files as EPS from Illustrator no problem (even on the server) and I can open them normally. All other formats such as, indd, psd, tiff etc. saves fine and I can open them too. Once in a while, Illustrator will not give ma any error code but they still save as 0KB. When I move the file from my computer to the server, the file is not 0KB but I can no longer open the file. It is really strange.
Does anyone have any idea what's going on? Please help. Thank you in advance.

If you do a search on Google i believe you will find links to pages that describe the problem and ffer a solution.
If on windows perhaps this is the problem
http://www.techsupportforum.com/design-forum/graphic-design-digital-imaging-multimedia/409 713-adobe-illustrator-cant-save-file.html
of I do believe there is another issue as well.
I could not find it myself though I am certain there is a fix.
it might be a permissions problem.

Upgrade list of transactions that changed

Hi all,
We are upgrading from 4.6C to ECC 6.0. Is there somewhere where I can find a complete list of transactions that have changed? IE have a screen change where our BDC programs will no longer work.
We'd like to get an idea of how big of an effort the upgrade will be as far as custom programs. We have some BDCs that can be changed to BAPIs in 4.6C. But like many of you the work, doesn't stop just because we are going to upgrade. So rather than change all the BDC programs that we can, it would make sense to only change the ones on the list.
Thank you,
Michelle

That's not quite what I was looking for. I probably didn't phrase my question well.
Can anyone tell me the transactions for the screens that have changed in ECC 6.0 from 4.6C? We have BDCs and are looking for a way to determine which programs will no longer work - prior to having an ECC environment and just running the programs.
Thank you,
Michelle

Generate list of files

I've been looking into Automator for about a day, so I'm definitely a novice.
I was able to make a workflow that could rename files in a folder, and then move them to another folder.
Now what I'd like to do, either in a separate workflow or at the end of my current one, is to generate a list of the files in the new folder. Basically, to:
open a new a textedit document,
write the file names of all the re-named files into the textedit document
save the document into the same folder.
I'm not sure yet whether I'll need to strip the file path from the name or not (this file list goes into a MatLab program to tell it what files to look for).
Basically, is this doable in Automator, or should I try to do it in AppleScript (will need to learn this, so Automator would be preferable).

Hi Alan,
at the end of your workflow just add a new text file action...
The list of names will get passed on to it from the previous action.
regards
RIc

Dtrace Script to Generate List of Files that Changed on NFS server?

Similar Messages

Maybe you are looking for