Dual Boot Assistance

I'm trying to get a dual-boot working with XP and Arch. I've tried to do this a few times but it's always resulted in GRUB not loading and Windows XP starting up anyway. I have a 250GB HDD and 2GB RAM. My plan is:
sda - /boot 100MB
sda1 - XP 50GB
sda2 - NTFS Storage 80GB
sda3 - / 20GB
sda4 - /swap 1512MB
sda5 - /home rest of HDD
Is this plan okay? The reason that /boot is at the start is because of GRUB not loading before. Also, what is the best way to get the install to work (when preparing the hard drive)?

If Windows XP starts when you start the computer it means GRUB isn't installed on the MBR. You can do this several ways. The internet (and the forum) is full of advice on how to do this. My advice would be to install WinXP first (on the first partition, obviously, because that's how Microsoft wants it) and Arch second. That way the Arch installer will deal with GRUB lastly.
Oh, and why 50 GB for XP if you plan oh having an 80 GB drive D: ? Here's a thought...
▪ sda1: NTFS 10 GB (and I'm being generous since I'm thinking using TinyXP you can probably get away with 3 GB, Program FIles, pagefile and temp folders on D: and maybe even 2 GB but it's streching it. Maybe MicroXP)
▪ sda2: ext4 10 GB (again, I'm being generous since you can get away with much less if you keep packages to a minimum)
▪ sda3: 100 GB NTFS (you'll need a drive D: when it's time to reinstall Windows, and trust me, that time will come)
▪ sda4: rest of the HDD as ext4. Or better yet format it as ext3 with inode 128, so you can load it in WinXP through Ext2Fsd, even as Read-Only if you wish). This partition will probably be used for storage so it's ok if it's not ext4 or btrfs... ext3 is a fine, mature filesystem. Reliable.
There are only 4 in my scheme and you can make them all Primary partitions
(sda1-2-3-4 instad of sda1-5-6-7 or some shit like that).
Notice I didn't include a boot partition nor a swap partition. You can use a swapfile (which is similar to "pagefile.sys" in Windows XP). Also, I don't feel the need for a /home partition. Especially because of the dot files and the desktop files... It's kinda similar to the Local Settings, Application Data folders in Windows XP. But that's just me. I like having the data partition clutter free of dot files and configs and shit.
Last edited by DSpider (2010-07-12 21:30:04)

Similar Messages

Dual Boot Windows 7

Hey guys, I was just wondering what exactly I need in order to successfully dual-boot my Mac into Windows 7. I've got the software for Boot Camp all down and ready, but my only question is finding the right copy of Windows 7 that'll install as a first time. Also, can I install Windows 7, or would I need Windows Vista/XP already installed and then just upgrade the Windows? Thanks, and could you tell me if this Windows 7 product is correct/eligible for Dual-Boot: http://www.bestbuy.com/site/windows-7-home-premium-with-service-pack-1-64-bit-li cense-and-media-1-pc-pc/5130359.p;jsessionid=B5FB2641437C993E1EAE2430E84DAB00.bb olsp-app03-156?id=1219111161659&skuId=5130359&st=categoryid$abcat0508002&lp=4&cp =1
I guess when it says PC disc, it'll work with dual-boot.
Again, thanks!

How old is your Macbook? The majority of them can directly install Windows 7.
Yes, the product you linked to from BestBuy is what you'd need to install Windows 7.
The only additional thing you'd need is a 4gb flash drive to store the Boot Camp drivers on after you first install Windows.
Setting up a Boot Camp partition is pretty straightforward, just start Boot Camp Assistant and follow the instructions. But feel free to post anymore questions if you have any, because there's always a chance of breaking something if you're doing it for the first time

Dual Boot Win 8.1 & Win 7

I've just taken delivery of a 15-p011na laptop.
This has Windows 8.1 & a 1TB HDD with 5 apparent partitions seen with AOMEI Partition assistant as follows:
*: WINRE NTFS 650.00MB capacity 421.48MB used
*: FAT32 260.00MB capacity 117.95MB used system
*: Other 128.00MB capacity 0.00MB used
C:Windows NTFS 908.78GB capacity 42.31GB used Boot
D:Recovery NFTS 21.71GB capacity 19.57GB used
I would like to create a dual boot with Windows 7 so that I can copy my Windows 7 (32 bit) drive from my old computer to another partition. I have tried shrinking the size of C partition and then installing Windows 7 32 bit on the unused partition. However, I get an error saying that the drive is GPT and I've read that the only way around this is to convert the whole drive to MBR which can be done on the fly with a utility like AOMEI Partition Assistant.
However, MBR will only recognise up to 4 partitions and I would require 6 with the shrunk C partition so can I get rid of the 3 small partitions or will this affect the drive? I have already made a copy of the restore software onto DVD's.
Failing that perhaps I can boot from my old Windows 7 drive as an external USB drive but any attempt to boot from it just crashes and I've tried using Paragon Adaptive resore but the USB drive isn't recognised.
Any ideas would be greatly appreciated.
TIA.
Geoff.

Paul
Given what the cable does and what device manager looks like it is a driver issue. Their driver. Your best bet is to contact the developer BUT I do wonder if you have tried re-installing the driver in compatibility mode for win 7
To install in compatibility mode do the following:
Right click the installer>properties>compatibility>choose OS
http://windows.microsoft.com/en-US/windows-vista/Make-older-programs-run-in-this-version-of-Windows?SignedIn=1
(works in vista, win 7, win 8, and win 10)
Wanikiya and Dyami--Team Zigzag

Dual boot Windows 8.1 with Yosemite

I'm attempting to dual boot Windows 8.1 on my parents iMac. I downloaded and successfully used Boot Camp 5 to partition the drive, giving the new section 50GB. I successfully installed Windows 8.1. Unfortunate now I cannot access the Yosemite partition. Boot Camp is not available in the Windows 8.1 I just installed, so the obvious option to use Boot Camp to reboot into OS X is not available. I tried downloading Boot Camp in Windows, but it won't install - error message indicates there is no location to install it to. I tried to restarting and holding the option key 12 separate times, it always boots into Windows without bringing up the any other option. I tried booting into safe mode and resting the PRAM several times, same outcome of booting into Windows; although Windows did not always boot it froze half the time. The idea was just be able to run some Windows games without purchasing another computer. Any ideas on what went wrong and how to fix it?

You do not need the Boot Camp drivers on Windows in order to start up in OS X. However, note that the option to start up with the Option (Alt) key is more tricky in those computers with a Bluetooth keyboard, such as the iMac.
In order to start up in OS X, you have to press the Option key since the startup sound has finished (if you do it before, your Mac will not recognize it) and hold it until you see all bootable partitions in the screen. Then, choose your OS X volume.
If you could not install the Boot Camp drivers in Windows, open Boot Camp Assistant after starting up in OS X and follow its steps (you will need a USB drive to save your drivers). Finally, start up in Windows, access to your USB drive through Windows Explorer and run the installer.

How do i set up a dual boot with windows

I am trying to set up a dual boot system with both the snow leapard and win 7, I have partioned the drive and have windows booting up. How do I get the drivers for the machine that windows will recognize. I am researching this for my dad his I mac is one of the new 21 inch models.

If you want dual boot you would use Boot Camp which is built into Snow Leopard. You will need a license of WIndows 7. You can install it by using Boot Camp Assistant however prior to doing so you probably should look at how it's correctly done, here is a You Tube Boot Camp instructions video I would recommend you watch first.
If your dad wants to run Windows 7 & OS X simultaneously then he will need either Parallels or VMWare Fusion. Both are virtualization applications that allow one to run Windows and OS X side by side. This is a great solution unless he is a gamer or needs to run graphics intensive applications like CAD/CAM or 3D Games or anything that is 3D intensive. For all other types of applications virtualization is an excellent solution.
If you choose the Boot Camp solution there is a forum specifically for that which is where I'd recommend posting questions.
Roger

How do I repair a Windows 7 partition when it is after Windows 8 partition in a Dual Boot Setup

I have a laptop that I purchased a year ago and which came pre-installed with Windows 8.
Recently, I successfully added Windows 7 as a dual-boot, and this worked OK. To obtain the space for Windows 7, I shrunk the Windows 8 partition.
In Disk Management, the Windows 8 partition is physically located after OEM and EFI partitions; Windows 7 partition is is adjacent to Windows 8.
All went well until I shrunk the Windows 8 partition further to increase the size of the Windows 7 partition, after which Windows 7 came up with a boot error....Windows 8 still boots OK.
I inserted my Windows 7 disk to perform a Startup/Repair, which failed because the first OS partition it sees is Windows 8 and a message tells me that I need to install the correct media for that system.
I searched for advice and assistance to solve the problem....to no avail - and had to completely re-install Windows 7 and the associated applications.....and I really don't want to have to go through this again.
I actually use Windows 7 more than 8, and if I have to lose one or the other, I would dump Windows 8.
So....is there a manageable way I can keep the two systems recoverable and migrateable to another disk in the future. If not, how do I safely remove the Windows 8 partition without damaging Windows 7? Ideally, I would just like to swap the partitions
round....but with EFI and BCD partitions, I am reluctant to go into the unknown.
Sorry....bit of a saga....but would appreciate any advice.
Rob Nick

Hi Rob,
Above all, as the purpose is to enlarge Windows 7 partition, please understand that shrink Windows 8 partition again cannot help on it. A partition can be expanded only if there is free space "after" it.
So you will still need to delete Windows 7 partition for expanding purpose.
If it is fine to just make Windows 7 back to boot order. Please try following command lines.
Note: Please run CMD in Administrator mode.
bcdedit /export “c:\boot”
This is a backup. You can delete it if things go successfully.
Then please create a new entry for Windows 7:
bcdedit /copy {current} /d “Windows 7”
It will provide an entry ID. Copy it and it will be used in following 2 command lines.
bcdedit /set {identifier} device partition=X
Replace X with the drive letter of Windows 7 system located.
bcdedit /displayorder {identifier} /addlast
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Dual Boot Ubuntu and Windows 8.1 on HP ENVY dv7

Okay, I've installed 14.04 LTS with EFI and Secure Boot enabled. My problem is that the HP automated boot process ignores the presence of Ubuntu and boots directly into Windows. The only way I can boot into Ubuntu is to intercept the boot process by pressing the Escape key immediately, selecting Boot Device options (F9). choosing "Boot from EFI File", then pressing Enter on the next page (a description of the hard drive), choose EFI from the next screen, select "<ubuntu>" from the subsequent list, the select "shimx64.efi" from the next screen, which gives me the Grub list (without, I might add, any reference to Windows!) So, while it works, it is a laborious process at best. Have tried to follow the following post from an HP help forum:
So, until HP releases an updated UEFI that allows turning this "feature" off or rearranging boot options through the F10 UEFI setup, this is what you can do to get dual boot with the least amount of hackiness:
In Windows, mount the UEFI partition (mountvol S: /S mounts it as the S: drive) and copy the file \EFI\Microsoft\Boot\bootmgfw.efi to use some other name (for example, I copied it to "\EFI\Microsoft\Boot\bootmgfw.efi~", but you can change the name to anything else).
In the Windows command prompt, update the Windows UEFI entry to point to the new name: bcdedit /set {bootmgr} path \EFI\Microsoft\Boot\bootmgfw.efi~ (adapt to your set name accordingly).
Optionally, change the name of the Windows boot loader so that you would be certain that it points to the new file location: bcdedit /set {bootmgr} description "Fixed Windows path"
Install the other OS. In my case the bootloader was installed into \EFI\opensuse\grubx64.efi.
Delete the two files, \EFI\Microsoft\Boot\bootmgfw.efi and \EFI\Boot\bootx64.efi.
Use efibootmgr to delete the "OS boot Manager" entry: sudo efibootmgr -b 0000 -B
Set the new OS bootloader to be the default bootloader by using efibootmgr with the -o option. In my case, I had an entry called "opensuse" in slot Boot0001 and the updated path Windows entry in slot Boot0002, so I had to do sudo efibootmgr -o 0001,0002
Update GRUB to point the Windows entry to your renamed file (you'll have to create a new file in /etc/grub.d and rerun grub-mkconfig).
Was able to do everything as posted except "Delete OS boot Manager", because there is no entry for that item when I run efibootmgr in Ubuntu terminal. I did reorder the boot order using efibootmgr so that Ubuntu was first and Windows was second, but the HP OS boot Manager changes it back!
Would really appreciate any help. Thanks in advance.
SamJ20109

Hey vikas_g,
Welcome to the HP Forums!
With Ubuntu not recognizing your partitions during installation, some information that may be of assistance to you, could be in this document 'Frequently Asked Questions About Linux (FAQs)'.
If your question is not answered from this document, I would suggest asking your question on the Ubuntu Forums.
I hope this information helps!
I worked on behalf of HP

Macbook Pro - 2 Hard Drives - Dual Boot OS OSX + Windows

Hello guys, I've been facing an issue here
I bought an SSD 2 years ago and changed the original MBP HD. I did a fresh install of OSX while still having my optical drive. Everything is fine with the OSX installation.
Recently I bought an enclosure and installed the original MBP HD drive into the optical drive slot. Now i have two HD's on my MBP (Early 2011 - Unibody Model)
The configuration for the Hard Drives is as follows:
SSD Drive - disk 0 - OS X Running fine
HD Drive - disk 1 - clean formatted to accommodate Windows 7 installation
I started the BootCamp Utility formated the second hard drive to install windows from bootable USB. Everything works fine until the point where the Windows installation actually expands the files. I always get the same error, that windows cannot be installed on that drive and any changes will be reverted back to original settings.
Several hours after researching the whole thing this is what I've got:
The error that I am getting is for the configuration of the drives, a fix to this problem is to take out my SSD, install the old HD in its original position, install windows normally, put my SSD back in its position and put the old HD in the optical drive and thus I will have the Dual Boot of two OS in two different HD's. That's really really awful as I have to take appart again the whole thing and swap between the drives till the process is finished. This is because The EFI boot + Windows to be installed require the disk that windows to be installed to be on main slot - disk 0.
My question here is, is there any fix to the BootCamp assistant to let me install windows on the hard drive that it is located on the disk 1 position?
Moreover is there any way to install windows through the environment of OSX with the use of a VM, but, the windows to be a bootable OS rather than a VM bootable image? (on disk 1 - optical drive SATA port). - What I mean by that is, while running OS X normally on disk 0 run a VM software that will mimic the environment of a bootloader so that I can install windows on disk 1, but after I shut down my computer, windows should be accessible on disk 1 as a normal installed OS.
Sorry for the long post and thank you very much for your time, any suggestions would be really helpful.

You can install Parallels or Fusion, either will work. When you setup either Parallels or fusion you can tell it to use your already installed Boot Camp installation of Windows as its target guest operating system.
You would then just boot into OSx, start your VM (Parallels or Fusion), then you'll have access to both OSx and Windows without having to reboot.
I have this setup and two monitors. I have my Windows running on my external monitor and OSx running on my Macbook Pro monitor at the same time.
Beware that you will need to re-register Windows to get a second key. This is free and easily done either online or by calling the Microsoft registration number. The reason for needing a second key is that Windows, although only installed once in your Boot Camp partition sees the virtual hardware created by your virtual machine and thinks it has been reinstalled on a new computer.

I want to dual boot Windows 8 on my 20-inch, Mid 2007 iMac, from an external USB drive.

I want to dual boot Windows 8 on my 20-inch, Mid 2007 iMac, from an external USB drive. The internal drive is completely dead, it doesn't even show up in Disk Utility. I'm running 10.8.2 from the external drive. When I start Boot Camp Assistant, at the Introduction page, when I press the continue button nothing happens. Do I have to have internal drive to run Boot Camp Assistant? Can anyone provide me with the steps to dual boot, with his setup? Thanks in advance!

Hi maczimillon,
Only follow these steps, it works for my:
Open "System Information" and note your "Boot ROM Version" (some like MBP51.007E.B06)
Navigate to "Utilities" in Finder and open the package contents of -BootCampAssistant.app- with right click. Duplicate the "Info.plist" file to the Desktop e.g. and open that with Text Editor.
You must locate the keys "DARequiredROMVersions"and "USBBootSupportedModels"
Add new strings with the information of your machine under booth keys (step 1), always respect the format, such as: <string>MBP51.007E.B06</string> for the frist key and <string>MBP51</string> for the second key.
Save changes and replace the original plist file (it may ask you to enter admin pass)
If you proceeded correctly you will see the checkbox "Create a Windows 7 USB install disk" enabled in Boot Camp Assistant.
Then you can follow the usual Boot Camp installation using your WIN8 DVD iso image . The assistant program will proceed resizing your disk partition and installing necessary drivers for your iMac.
I strongly recomends you to use thirld party's bootloaders like rEFInd (rEFIt) because of the Apple SMC versions of some old machines should not be able to boot properly from external devices like USB drives.

Error with dual boot Win 8/OL6 R3

Hello,
I am hoping to discuss this with someone who has experience with this configuration. My goal is to get Oracle Linux dual booting on my windows 8 machine.
I have installed OL but I am having trouble getting it to dual boot win8/OL using the windows boot menu. Whereas windows 8 boots as expected, the Oracle Linux option gives me the error:
"+Windows failed to start. A recent hardware or software change might be the cause...contact you system administrator or computer manufacturer for assistance+
+File:+ \NST\nst_linux.mbr
+Status: 0xc000007b+
+Info: The selected application or operating system couldn't be loaded because a required file is missing or contains errors.+"
Here are some details of the scenario:
- Documentation followed: Red_Hat_Enterprise_Linux-6-Installation_Guide-en-US.pdf
- Hardware: Dell Precision M4700 64 bit UEFI
- OEM installed/Default OS: Windows 8 Pro 64 bit
- Installation source: OracleLinux-R6-U3-Server-x86_64-dvd.iso (written to DVD)
These are the broad steps I followed:
In windows 8
I:
- downloaded the Linux ISO software. The checksum on the download matched
- wrote the ISO to a bootable installation disk
- created a new 344gb partition for Linux using the DOS DISKPART command - partition 7
Linux Install
- I booted using the Linux installation DVD and started the installation
- When Installing Linux partition 7 became a 500mb system partition and partition 8 became the 343 gb Linux partition
- I manually created the boot partition as ext3 (because the pdf I was following said "+If your 64-bit x86 system uses UEFI instead of BIOS, you will need to manually create a /boot partition. This partition must have an ext3 file system. If you choose to partition automatically, your system will not boot.+"
- I installed the boot loader on sda7. I selected “First sector of boot partition - /dev/sda7”. I assume this installs separate GRUB boot loader on the Linux partition (7) – which will then be 'chain loaded' from the windows boot menu. Put another way, it will boot with the windows boot manager, which will give me an option to chain load the Grub boot loader, which will then run Linux...
- I chose the desktop installation
- The installation reported that it completed successfully
I successfully booted back into windows:
- I used easybcd to edit the microsoft bcd and successfully created a boot menu for Oracle Linux. I used the legacy grub because the Linux documentation says "+Note that the version of GRUB in Red Hat Enterprise Linux 6 is an old and stable version now known as "GRUB Legacy" since upstream development moved to GRUB 2.3 Red Hat remains committed to maintaining the version of GRUB that we ship with Red Hat Enterprise Linux 6, just as we do with all packages that we ship.+".
- After installing Linux and updating the BCD, the BCD now looks like this:
Windows Boot Manager
identifier {bootmgr}
path \EFI\Microsoft\Boot\bootmgfw.efi
description Windows Boot Manager
locale en-US
inherit {globalsettings}
integrityservices Enable
default {current}
resumeobject {2b56acdd-8bbe-11e2-9ba6-b8ca3ad88679}
displayorder {current}
{524cc0d3-8bce-11e2-935f-b8ca3ad88679}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
identifier {current}
device partition=C:
path \Windows\system32\winload.efi
description Windows 8
locale en-US
inherit {bootloadersettings}
recoverysequence {524cc0d1-8bce-11e2-935f-b8ca3ad88679}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice partition=C:
systemroot \Windows
resumeobject {2b56acdd-8bbe-11e2-9ba6-b8ca3ad88679}
nx OptIn
bootmenupolicy Standard
Real-mode Boot Sector
identifier {524cc0d3-8bce-11e2-935f-b8ca3ad88679}
device partition=C:
path \NST\nst_linux.mbr
description OracleLinux
I'm not sure the BCD entry is correct. I assume that this entry should be pointing to the nst_linux.mbr on the Linux boot partition. However I have verified that this file exists in windows 8:
C:\NST\nst_linux.mbr
I haven't been able to exactly confirm how the boot process should work i.e. whether this file should actually be in the Linux boot partition (as opposed to the windows c drive) and whether the BCD should also point to the Linux boot partition when referring to this partition.
As I mentioned above, I now have the windows boot menu with Windows 8 (which boots successfully) and Oracle Linux (which gives me the error see below for complete wording**). Is the Real-mode Boot sector wrong? Should it point to the Linux boot partition? Is it a problem with my UEFI disk? I don't think it should be because this version of Oracle Linux supports UEFI and my hardware is UEFI.
Has anyone carried out a similar win8/OL dual boot?
2001
** Complete wording of the Linux boot option in the windows boot manager:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disk and restart the computer.
2. Choose your language settings, and then click "next".
3. Click "Repair your computer".
If you do not have this disk, contact you system administrator or computer manufacturer for assistance
File: \NST\nst_linux.mbr
Status: 0xc000007b
Info: The selected application or operating system couldn’t be loaded because a required file is missing or contains errors.
Edited by: 2001 on Apr 1, 2013 4:27 PM
Edited by: 2001 on Apr 17, 2013 5:17 PM

Hi,
Here are my responses:
*[asmirnov]* Could you please confirm, I just want to see if I got it right the first time -
*[2001]* I'm happy to share my progress
Q1)
*[asmirnov]* You did create a partition (where you would install Linux) from Win8, correct?
*[2001]* Yes. I used diskmgmt.msc to create a separate partition. I didn't format the partition because the Linux install doesn't want that, it creates and formats the partitions in the unallocated partition
Q2)
*[asmirnov]* You use GRUB (not GRUB2)?
*[2001]* I'm not sure where you were asking about, so I hope my answer here covers all possibilities you may have meant.
I was using the windows 8 boot. I wanted to chain load to the boot loader in the Linux Partition. It is interesting what the Linux install did with my partition, it created 2 partitions in the unformatted partition. 1 was a bootable partition and the other was the Linux partition. The details were:
2 sda’s (a boot / ext4 and a VolGroup (vg_linuxlocalhost)/ physical volume (LVM) ). In the VolGroup it created 3 lv’s, lv_root, lv_home and lv_swap. I understand that this is all normal.
I followed the documentation note which said "To configure the Red Hat Enterprise Linux boot loader to chain load from a different boot loader, you must specify the boot drive manually. If you chose any of the automatic partitioning options, you must now select the Review and modify partitioning layout option before you click Next or you cannot specify the correct boot drive"
So there was also the note in the documentation that said "Note that the version of GRUB in Red Hat Enterprise Linux 6 is an old and stable version now known as "GRUB Legacy" since upstream development moved to GRUB 2.3 Red Hat remains committed to maintaining the version of GRUB that we ship with Red Hat Enterprise Linux 6, just as we do with all packages that we ship." I didn't install any bootloaders manually (either the windows 8 OOTB default that came with my machine or the Linux one), I just took the defaults. I'm wasn't sure how to access the Linux partitions once it is installed, so I can't confirm it was the legacy GRUB in the Linux boot partition, but I believe this note is saying that it OL6 does use the legacy grub. I believe GRUB Legacy is version .97.
Q3)
*[asmirnov]* Which version of Linux exactly did you use, was that Oracle Linux or you used one from RedHat directly? What is the kernal version?
*[2001]* I used "OracleLinux-R6-U3-Server-x86_64-dvd.iso.sha1sum" from the mirror site http://mirror.aarnet.edu.au/pub/oraclelinux/OL6/U3/x86_64/. According to the release notes at: https://oss.oracle.com/ol6/docs/RELEASE-NOTES-U3-en.html the kernel is
- Unbreakable Enterprise Kernel Release 2 [kernel-uek-2.6.39-200.24.1.el6uek]. Installed and booted by default
- Red Hat compatible Kernel [kernel-2.6.32-279.el6]. Installed by default
Note: By default, both the Unbreakable Enterprise Kernel and the Red Hat Compatible Kernel for the specific architecture (i386 or x86_64) are installed, and the system boots the Unbreakable Enterprise Kernel by default. If needed, /etc/grub.conf and /etc/sysconfig/kernel can be modified to make the system boot with the Red Hat Compatible Kernel by default.
Regarding your follow-up point that "Microsoft blocks 3rd party chainloaders from the BCD menu for UEFI machines. We are researching workarounds, none have presented themselves as of yet.", I'm not sure it actually blocks it, but it certainly isn't a straight forward process.
I have actually abandoned my attempt to get the dual boot working. It is a real shame because I wanted to do it for my own satisfaction.
I am now using Oracle Virtual Box as suggested by others, include Dude earlier in this thread. This has given me confidence that I was doing all the right things because the install worked first time without any problems. The virtualization is much simpler and I have had no problems so far.
Fusion
As for your point about the fusion middleware and OL5. I am looking at Oracle SOA with is part of the Fusion brand. I think that the latest SOA components will work on OL6 - but I have yet to try it. Following the certification matrix can be a little difficult. So as I indicated above, my current thoughts are to use the Oracle Virtual Box with Linux r6 u3 and to install the SOA components on that when I get chance. The alternative is using the pre-built virtual machine it has Linux and SOA (it might cover your stack too, or there may be another one that suits you better on the site) http://www.oracle.com/technetwork/middleware/soasuite/learnmore/vmsoa-172279.html. Note that this is still on OL5.
I hope this helps.

Dual boot Windows 7 and Arch from 2 seperate drives (UEFI)

Hello everyone, I've been working on installing Arch to a secondary hard drive for the past few hours, but I am trying to make sure I won't mess up my Windows 7 install. I have found several topics talking about dual booting Windows 7 and Arch, but not a whole lot on booting them from separate drives. My drives are currently setup as follows.
sda (120GB SSD for Windows 7)
sda1 (100MB System Reserved NTFS partition)
sda2 (Windows 7 install)
sdb (1TB HDD for Windows programs, files, etc)
sdb1 (1TB NTFS partition)
sdc (1TB HDD)
sdc1 (boot 512MB FAT32)
sdc2 (root 500MB ext4)
sdc3 (home 300GB ext4)
sdc4 (swap 10GB)
rest unallocated "free space"
I used Gparted to create the partitions. I ended up getting hung up on the "Create Filesystems" sections, specifically this line"
# mkfs.fat -F32 /dev/sdXY
Now that I am looking at it, I'm thinking the "Create Filesystems" section maybe isn't necessary because I've used Gparted?
If it isn't necessary, when I get to the "mount the EFI System Partition to /boot" section, would I simply use
# mount /dev/sdc1 /mnt/boot
instead of
# mount /dev/sdXY /mnt/boot ?
The way I had this setup with Ubuntu was 3 partitions on sdc (/, home, swap) and I set my PC to boot to the sdc drive on startup. The boot loader would then give me the option to boot into Ubuntu or Windows 7, and I never had to alter the sda or sdb drives at all. Is this possible through Arch? My thinking is that even if it isn't, I should still be able to enter the BIOS boot menu and select which drive to boot manually correct? That wouldn't be too big of a deal for me because I spend 90% of my time in Linux, and only use Windows for Photoshop and gaming occasionally.
Thanks for taking the time to read this. I would have just tested this out, but I am afraid of messing up my Windows install.

After several sleepless hours I had to give up and go to bed about 5 hours ago. The installation process went smoothly (or so I thought). I followed the tutorial closely and upon rebooting I was met with a blinking cursor. After some googling I found others who said I should press TAB, but nothing seemed to work.
I rebooted to the iso disk and found the "boot installed OS" option and noticed it said "Press TAB to edit". I then found the boot parameters and tried everything from hd0 0 to hd4 4. I believe I have Grub setup correctly because every option besides hd0 0 either says "Booting..." and then gets stuck, or says "That disk and partition combination does not exist". So yea, I think hd0 0 is the correct boot path, it just gets stuck with the blinking cursor.
silverhammermba wrote:
You have the right idea. You want to install a bootloader on sdc1 which will be able to boot both Arch and Windows.
Your best bet would be to use something like rEFInd. It has a "scanfor" option that should automatically detect your BIOS-configured Windows installation and add a boot option for it. Note that depending on your motherboard, you may have to switch to UEFI-only mode and Windows will be unbootable without the assistance of a UEFI program which is backwards compatible with BIOS (like rEFInd).
Thank you for the link. Considering I can't get into my install and the actual install only took about 30 minutes, I think I am going to just start from the beginning again with REFIndr. It seems much simpler. I only used Grub because I've used it before with Ubuntu, but my very limited knowledge is telling me Grub is probably the problem.
MoonSwan wrote:Just an idea: My bios has a "Boot-up Prompt" which I can invoke when it's POSTing by hitting F11. This brings me to a menu that allows me to choose which drive I want to boot up that day. I use it when Syslinux isn't working properly (Which is right now as a matter of fact ...) in order to boot Windows so I can do some SCII, for example. I, too, dual-boot but I have both OSes on different SSDs. So my 120GB Crucial SSD has Arch on it and the 240GB Kingston has Windows, SCII, Portable Apps, etc and nary the two shall meet. It makes dual-booting easier in the case of a corrupt OS or MBR or what-have-you. You may want to give your Bios a better look to see if you can do the F11 trick. It probably can and will usually tell you so at POST by printing that information on-screen along with your drives-detected and other messages (I hit Pause sometimes to read all the POST messages).
This is exactly what I was talking about doing when I mentioned:
My thinking is that even if it isn't, I should still be able to enter the BIOS boot menu and select which drive to boot manually correct?
That's good to know, because even if this next install doesn't work I think if I pull the other drives I should be able to get it working fairly easily.
Thanks again everyone.

Looking to dual-boot windows 7 (don't know which forum to go to)

Hello everyone,
I need some help since I've been unable to get this to work properly. I need to set a dual boot systems both on Windows 7, the reason I can't just use one is that the testing center we work with is very specific with their requirements to be able to
run and use testing software. With their requirements we are not able to use a VM (which is what I would normally do). And all my attempts of making the dual, has failed.
So now I come asking for assistance with this horrible luck I've been having making this system work on a x64 bit system.
Thank you for your time!
Patrick

Have a look at this one;
http://windows.microsoft.com/en-au/windows/install-multiple-operating-system-multiboot#1TC=windows-7

Dual boot ing pre-installed Windows 8 and windows 7?

Hi there
I have a lenovo G505s that came with windows 8 and would like to download windows 7 and have them dual boot for gaming purposes so I was wondering I could get any advise on the matter.

Welcome to the forum!
With Windows, generally you have to install the older version first then the newer with dual booting. Since you already have Windows 8 installed that might be a problem. Also resizing the partitions on your hard drive to make room will disable the option to use One Key Recovery at boot up. If the machine is still under warranty, you might wait till the warranty expires before re-arranging things. Also prior to installing Windows 7, make sure there are drivers available for your system's hardware.
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

I made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates? does hot fix of microsoft helps in stop freezing?

i made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates? does hot fix of microsoft i.e, " support.microsoft.com/kb/979491" helps in stop freezing in dual boot mechanism?

Windows has a software updater built into Windows and when you install the Boot Camp drivers then it will install an Apple software updater also. I believe Windows is set to automatically download and install your updates as does the Apple software Updater. They both will update the individual files it needs to periodically.
"Microsoft updates" and "Windows updates" are basically the same thing in Windows. Are you talking about the "Windows support software" when downloading from Boot Camp Assistant? Apple installs a software updater for it's Boot Camp drivers in Windows 7 so you can do it manually or automatically.
The "Hot Fix" your referring to is only for certain motherboards built from other Windows only computer manufacturers and does NOT pertain to any Apple computers.
If you have a problem with your computer then it's best to ask a specific question so we can help better.

Downgrade HP ENVY 15-u010dx to win 7, or duala boot win 7 and wind 8

i have brand new HP ENVY 15-u010dx with windows 8.1 installed.
Because of my needs (worrk related) i need win 7 installed.
Is it possible to install win 7 dual boot with win 8.1 ?
Does win 7 work on this machine, do you have drivers for win 7 x64
i'm asking this since i saw option in bios that has to be disabled to run win 7.
please help me..thanks in advance..

Hello @bigheadx,
I understand that your notebook computer takes a long time to reach the Windows log in screen after you power it on, and I would be happy to assist you in this matter!
To ensure there are no background programs or services that are slowing the booting process of your operating system, I recommend following the steps in this document on Windows 8 Safe Mode. I also suggest following this resource on Resolving slow system performance (Windows 8) to increase the speed and efficiency of your operating system.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Dual Boot Assistance

Similar Messages

Maybe you are looking for