Dual boot with Solaris 8.0 and Windows 98

I am interested in Setting up my pc with with a Dual boot of Solaris 8 and Windows 98. I have a 60 GB hard drive that I am going to make two 30 GB primary Partitions on this hard dive. One with Windows 98 and one with Solaris 8 Intel Platform version. The question that I have, Is this particular Setup doable? And if so can you tell me what order they have to be installed and what partition software I should use for this procedure. Also if i missing procedure please be very detailed in explaining this to me. I read the message board was confused.
If need be please email me at [email protected]

Hey, goto http://math.uwb.edu.pl/~mariusz/dualboot/ and that will answer all your dual boot questions ?
i2l2

Similar Messages

  • Can I dual boot with MAC OS/X and Windows

    What is the best way to configure a dual boot on my MAC Bookpro laptop? Also, can I dual boot Windows 8 and MAC OS?

    The first alternative is a dual-boot arrangement between OS X and Windows provided with OS X.
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
         1. Install the Apple Boot Camp software.  Purchase Windows
             XP w/Service Pak2, Vista, or Windows 7.  For Boot Camp
             4.0 and above you can only use Windows 7 or later. Follow
             instructions in the Boot Camp documentation on
             installation of Boot Camp, creating Driver CD, and
             installing Windows.  Boot Camp enables you to boot the
             computer into OS X or Windows.
         2. Parallels Desktop for Mac and Windows XP, Vista Business,
             Vista Ultimate, or Windows 7.  Parallels is software
             virtualization that enables running Windows concurrently
             with OS X.
         3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
             or Windows 7.  VM Fusion is software virtualization that
             enables running Windows concurrently with OS X.
         4. CrossOver which enables running many Windows
             applications without having to install Windows.  The
             Windows applications can run concurrently with OS X.
         5. VirtualBox is an Open Source freeware virtual machine such
             as VM Fusion and Parallels that was developed by Solaris.
             It is not as fully developed for the Mac as Parallels and VM
             Fusion.
    Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • I have a dual boot with Ubuntu 10.10 and Windows 7, with linked profiles. When I upgraded to 4.0, my tabs and settings would show in Windows, but not Ubuntu. How do I fix this?

    This worked when I first installed and booted in Ubuntu. When I booted in windows, my tabs which were open in Ubuntu opened in Wndows. But, when I booted back into Ubuntu, all of my tabs and pinned tabs were gone, as well as the firefox button. My bookmarks and firefox background remained, but none of my tab settings.

    Norton is due to release a patch for both IE9 and Firefox 4 in May. See [http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-compatibility-with-IE9-and-FF4/td-p/420020 Norton compatibility with IE9 and FF4]
    To revert to 3.6.16, do the following.
    * Go to [http://www.mozilla.com/en-US/firefox/all-older.html Download Firefox v3.6.16] and download it to the desktop.
    * Then go to Add/Remove Programs, scroll down to Mozilla Firefox and remove it, choosing to keep your bookmarks, customizations etc., (don't checkmark the box).
    * Then reboot and delete the folder called Mozilla Firefox at this location: C:\Program Files\Mozilla Firefox
    * Finally run the installation file you downloaded.
    Actually, Firefox 4 does have a means of identifying untrusted sites. See [[Site Identity Button]]

  • Dual boot with two arch installations and gummiboot

    Hi,
    I found similar topics regarding this matter, but they couldn't resolve my doubts, so I ask once again.
    I currently have an EFI partition with gummiboot and will like to add a new arch installation (to have different configurations, packages versions and repositories. I came to the conclusion that this is the cleanest way to achieve what I want). I think I could use the same partition but if I mount it on /boot there will be problems when I upgrade the kernel because it will override the image in the partition when running mkinitcpio. Maybe if I maintain both installations in sync everything would be fine, but on the long run I think this could cause problems.
    I considered to edit /etc/mkinitcpio.d/linux.preset in one of the installations to change the name of the image, thus both images could cohabit in the same partition, but I don't know if there are some cleaner way to achieve what I want.
    Thanks.

    TheSaint wrote:It'll be necessary to configure mkinitcpio to address the correct path in order that the future kernel updates will go to ther right place.
    See this for details.
    I don't think so -- the use of a bind mount means that the kernel image can go in the standard location, that's the whole point of it.
    @OP: Yes, just make sure to call the path to the respective kernel images relative to $ESP

  • How to dual boot with Windows 8.1 and Arch?

    Hello everyone,
    I've been looking into using Linux as my daily driver since having some experience with it on a server. After some digging around, I think Arch Linux is the best distro for me, now onto where I am.
    I'm currently running Windows 8.1 (updated from Windows 8, which updated from Windows 7) on a Dell Inspiron 15R SE laptop, I want to dual boot Arch Linux with it. I've looked at the wiki and I'm still not entirely sure what to do.
    Can anyone give me a quick list of steps of what to do to dual boot this? I've dual booted Ubuntu in the past and it was really simple because an installer did it all.
    Thanks, Expi.

    stqn wrote:
    Expi1 wrote:Thanks, I'm mostly struggling with how to partition for Arch and then how to do the bootloader. I'm using Win8 64-bit and from what I understand a Legacy BIOS bootloader. I'm not entirely sure what I should be partitioning the C: into, I've done partitions before, just not for Arch and then I'm not sure whether to use GRUB or syslinux, or if I even need those. Or if I need to use GPT or MBR?
    Your disk is already partitionned so you don’t have to choose between GPT or MBR, the choice is already made.
    You don’t partition “C:”, that is the name of a Windows partition. You partition a drive.
    Grub or syslinux, use whatever the beginners guide tells you to. Personally I think syslinux is simpler which is why I’m using it (but I’m not dual-booting, if that matters).
    You’re not saying what your problem is with partitionning, so it’s hard to help.
    Thanks for getting back to me, I'm not sure if I just create one large partition for Archlinux or if I have to create multiple? Where I'm also confused is with the Creating Filesystems part of the guide. I don't understand how I'd do this in Windows, or what /dev/sda1 is referring to.
    As for the bootloader part, the Beginner's Guide gives you a choice between syslinux and grub, what I'm not sure about is which to use considering I'm dualbooting. How it will affect my windows bootloader, do I disregard that and use GRUB now? I'm unclear on how that works.
    I'm also aware I need to disable Secure Boot, I just searched my BIOS options and couldn't find anything remotely relating to that, so I'm assuming it's not an issue since this computer was originally on Windows 7 anyway?
    Thanks again, Expi.
    Last edited by Expi1 (2014-03-06 19:54:30)

  • [SOLVED] RTC and dual booting with Windows 8/8.1

    I am planning ahead of installing Arch on a windows 8.1 laptop, and need to understand whether or not the known Windows registry hack to get windows to use UTC for the RTC is still valid for Windows 8/8.1?  I have been searching via google and the usual sources of information, but it is not clear to me if there are problems doing this, specifically if arch is dual booted with Windows 8/8.1 rather than older versions of the MS OS. Certainly I have used the technique without any problem in the past when dual booting Windows XP with Arch on several different machines.
    Does anyone have personal experience with doing this on a Windows 8 or 8.1 machine and can report here on whether it works successfully or not?
    Thanks for any advice.
    Last edited by mcloaked (2014-02-11 21:16:21)

    Since there were no replies at this point I thought I would just go ahead and implement the registry hack on the Windows 8.1 O/S in the laptop and see if Windows behaves.  It appears to be OK, with the displayed time being correct after reboot, and time synchronisation remaining fine with no problems seen in the displayed time, although I won't be able to read the RTC directly until I have completed the Arch install in the coming week or two.  I now don't foresee any issues with the time synchronisation between booting Arch and Windows 8.1 so I will mark this as solved.
    Since the RTC is now in UTC then normal clock config in Arch using chrony should perform normally once the install is done and the new system set up.
    Last edited by mcloaked (2014-02-11 21:17:11)

  • Dual Boot with Windows ME

    i am very new to all this stuff. Can someone please guide me on how to go about installing Unix so that it also dual boots with windows ME.
    i am planning on doing some unix work..and installing oracle and learning oracle in the bargain at home. do u think this is the best way to go. any suggestions/guidance is appreciated.
    many many thanks

    I'd consider buying a second, inexpensive PC for Solaris. You can get a $20 mechanical switch that will let you share a single monitor. If two keyboards and mice are inconvenient, you can buy a KVM (keyboard-video-mouse) switch. If you just want to hack around, it's much more convenient to have two PCs. (IMHO)

  • Arch does not show up in Grub when dual booting with windows 8

    I just installed Arch linux, dual booting with windows 8 using the beginners guide[https://wiki.archlinux.org/index.php/Beginners'_Guide] itself. Now Grub is installed and i can only find Windows 8 and I cannot find Arch. Is there a way I can find if arch linux has been installed and show up in Grub.
    Sorry, I am a newbie, but i chose to post this topic here and not newbie corner as it is installation related.
    My windows 8 is installed on /dev/sda1 with ntfs partition type. Arch Linux is installed on /dev/sda6 and it is ext4 partition. I dont know if this info helps.  I am using Thinkpad R61
    Last edited by sutro_droid (2013-03-06 00:30:48)

    ivokosir wrote:It may be that you didn't install os-prober before running grub-mkconfig. This happened to me once, I hope I'm not too late to warn you.
    I am sorry, yes you are too late. I have wiped windows 8 and performed clean install. No regrets. And as a matter of fact, I did grub-config and then installed os-prober. That could be the problem. Thanks. I will try this again another time.

  • Dual Booting With Windows 8?

    So, I found this guide: http://www.neuraladvance.com/2012/11/17 … -uefi-lvm/. While I've ran and used Arch before a few times, it's been a while.
    The problem is that the guide decides to use the Windows 8 partition itself to install Arch; what I would like to do is use my own partition for Arch, making it as independent as possible from Win8, and both booted with Grub. I've already wiped everything and reinstalled Windows 8 first, however I'm a bit confused as to how to properly setup a UEFI partition. Period. Are there any good guides on how to do this? The Dual Boot article on the wiki, unfortunately, wasn't very helpful in my case.
    While I have the latest snapshot already on USB, it doesn't boot properly, not allowing access to /dev/tty (i.e., I can't do anything). Also, I unfortunately can't use GParted Live since none of my DVDs are rewriteable; they've already been used up over the years. So, if anyone has any suggestions on how best I can approach this (or good resources which are to the point; i.e., not too much details to wade through), it would definitely be appreciated.
    Thanks.

    holland01 wrote:
    So, I found this guide: http://www.neuraladvance.com/2012/11/17 … -uefi-lvm/. While I've ran and used Arch before a few times, it's been a while.
    The problem is that the guide decides to use the Windows 8 partition itself to install Arch; what I would like to do is use my own partition for Arch, making it as independent as possible from Win8, and both booted with Grub.
    By "the Windows 8 partition," it appears that you're referring to the EFI System Partition (ESP) that Windows created -- /dev/sda1 in the referenced guide. I've only skimmed the article, but I didn't notice any reference to using any actual Windows partitions in it. Note that the ESP doesn't really "belong" to any one OS; it definitely is not a Windows partition. It is, as its name suggests, a partition that "belongs" to the EFI. It's meant to be shared across OSes.
    That said, if you really want to, you can create multiple ESPs. This is legal according to the EFI spec. Unfortunately, it can cause problems, since the Windows 7 installer gets very confused if it sees multiple ESPs and an installation of Windows 7 will fail. I don't know if Windows 8 has the same problem, but if it does, and if you find that you need to re-install Windows, having multiple ESPs will complicate matters. Thus, I generally recommend sticking with one ESP per disk if at all possible. Be sure to keep it backed up in case some ill-behaved program trashes it, though.

  • How do I set up a dual boot with 10.8 and 10.7

    I want to set u a dual boot system using so10.8 and os 10.7 I have my disk for 10.7 and 10.8 is curently my os. I have an empety hard drive partition I want to install 10.7 on to but when I try to start up my computer with the instalation disk it gives me the "this computer needs to restart please push and hold your power button" message. Can any one help?
    Thank you
    Mike

    How to create an OS X Lion installation disc
    OS X Lion Install to Different Drive
    Your system (OS) selection of where has to be done BEFORE any restart.
    And you want to backup and retain a copy of the installer ".ESD" package first.
    On restart it will self destruct the package.
    A clean install on another drive or another partition.
    I prefer to go with pulling the old drive.
    Always retain backup boot ability and dual drive dual boot is just... safer.
    If you're looking for an OSX installation disc, and, like me, you upgraded to Lion through the app store, you will have to go through a back-door process in order to create this disc. Here's an article on this. http://www.macworld.com/article/161069/2011/07/make_a_bootable_lion_installer.ht ml (I can't guarantee it works. I made a disc like this because I thought I needed it to reload from a Time Machine backup, but it turns out that Lion doesn't require the disc for this, so I never used it.)
    When I installed Boot Camp and Windows, I didn't need the OSX installation disc. I'm not sure why you would, in this process. It should only ask for your Windows disc.
    If for some reason you downloaded Windows from Microsoft instead of buying a package with a disc, you need to download the ISO version and burn it to a DVD. See this article on downloading the ISO: http://www.mydigitallife.info/windows-7-iso-x86-and-x64-official-direct-download -links-ultimate-professional-and-home-premium/ (Make sure you choose the ISO that matches the version you bought).
    Here's instructions on burning an ISO with Disk Utility: http://lifehacker.com/251758/mac-tip--how-to-burn-an-iso-or-dmg-file-to-disc And this thread on burning a Windows DVD in OSX: https://discussions.apple.com/thread/2039118?start=0&tstart=0 (Summary: you can use Disk Utility to burn the ISO, but choose a slow burn speed)

  • Dual Boot with Snow Leopard and Mavericks not possible?

    I have a Early 2011 Macbook Pro with 2,3 GHz i7 Quad and two 512 GB SSDs (the secondary disk in an optical drive bay enclosure). This Macbook Pro can run Snow Leopard and Mavericks on the primary disk without problems. When I try to set up a dual boot system however, problems appear and it looks like it is not possible. When I start from Snow Leopard, I cannot select Mavericks as a start volume and vice versa. The error message says something like "Bless tool" cannot use this disk, i.e. unmount and boot from it. The problem remains when I exchange the disks (putting the primary disk in the drive enclosure and vice versa). When I put the secondary drive in an external case however, it is possible to boot from it -  but strange things happen when the system starts: My computer clock is reset to 1/1/2001, WiFI passwords are not remembered for more than one session, disk permissions are reported as "repaired" but do apear as not repaired when I check them again - and other issues). I have verified both disks already and repaired permissions but that does not change the situation. So my experience is different from what is said in https://discussions.apple.com/thread/566781. It looks like the latest Mavericks cannot coexist with Snow Leopard on neiter a secondary internal drive nor on an external drive. This is strange since both disks and systems work flawless when run alone. Any suggestions to solve this problem?

    When I check the Mavericks disk in the optical drive with disk utility after booting / running Snow Leopard on the primary disk I get som errors, see below ("disk utility Info"). So after all, I decided to erase the disk and install Mavericks new. But even erasing the disk is not possible when it is in the optical drive enclosure. I get this error message:
    "Volume Erase failed with the error:
    Could not unmount disk"
    When I put this disk into an external case connected via USB however, it starts and runds MAvericks without any Problem. Same happens when I put thie Mavericks disk into the internal primary hard disk place.
    "disk utility Info" when verinfying the secondary drive in the oprical bay:
    Verifying volume “Samsung SSD Daten”
    Performing live verification.
    Checking Journaled HFS Plus volume.
    Checking extents overflow file.
    Unused node is not erased (node = 40)
    Checking catalog file.
    Unused node is not erased (node = 30)
    Checking multi-linked files.
    Checking catalog hierarchy.
    Checking extended attributes file.
    Unused node is not erased (node = 8)
    Checking volume bitmap.
    Volume bitmap needs minor repair for orphaned blocks
    Checking volume information.
    The volume Samsung SSD Daten was found corrupt and needs to be repaired.
    Error: This disk needs to be repaired. Click Repair Disk.
    Verify and Repair volume “Samsung SSD Daten”
    Error: Could not unmount disk

  • Iv just done update for i phone 5 of 7.03 and my phone has froze with i tunes on screen only tried re booting , tried updating i tunes and windows on my pc anyone else out there same prob? Any answers to the prob poss :) hopefully

    Can any1 help me poss?
    Iv just done the latest update on my i phone 5 of 7.03
    And my phone has frozen on the screen
    With just logo of i tunes
    Tried re booting
    Tried updating i tunes and windows on pc
    And to no avail NO PHONE STILL
    OMG. I had nothing but probs since the 7 update
    With my i pad and phone and blue tooth in car also
    AT LEAST AT THE MO MY I PAD WORKS
    But seriously this is putting me off buying another r latest
    I phone
    I cant even get the serial number off my phone eva to send the
    Prob to apple on e mail etc
    I am to ring tomoz
    Im expecting poss having to get a new phone
    And LOSE ALL I HAD ON IT
    THIS IS SO NOT RIGHT AT ALL FOR ANY1
    Who has bought i phones etc
    As they ciat enough when u do
    You seriously do not expect this many probs
    Even if they are teething probs with the latest software

    Well the term "hotlined" I have never heard before. In any case many states (like NY) just passed regulatory powers to the State Public Service Commission of which it may be called something different in your state. You could file a complaint with them. Or file a complaint with your state attorney generals office, they also take on wireless providers.
    The problem here is the staff you speak to are poorly trained, in days gone by it took one call to them and they pulled up your account and see the error and had the authority to remove any errors. They did not remove legitimate account actions, but used their heads instead of putting a customer off or worse lying to the customer.
    Its a shame you have to go through what you going through.
    Good Luck

  • Dual booting between Solaris 8 and 10

    Hi,
    We mostly use Solaris 8 for testing which means I can't uninstall it. How would I be able to dual boot both Solaris 8 and 10 on a SUN SPARC machine? Is there a boot loader available like grub?
    Please help.
    Thanks alot!
    Till later,
    Joseph.

    SPARC doesn't need a split boot loader like BIOS/x86. The OBP can directly load from any slice. So 'boot disk:a' would boot from slice 0 and 'boot disk:g' would boot from slice 6.
    Darren

  • Dual boot with Ubuntu 13.0 using bootable USB problem (Y410P)

    Hi I recently bought Lenovo Y410P and have been since trying for hours to dual boot with Ubuntu but I was unsuccessful.
    I formatted by USB drive in FAT format, and created a bootable usb using Pendrive. Then I changed the Boot Mode to Legacy Support and the boot order so it boots from the flash storage first.
    Then it hung on a purple screen like this: http://img829.imageshack.us/img829/3509/dgfdgrunningoraclevmvir.png
    and the keyboard doesn't work and I couldn't go any further from here.
    So I tried to use a different program called Unetbootin, and the problem got worse and it just stopped working at the option screen where you select whether to just try Ubuntu or install it, etc.
    I read it somewhere the recent version of Unetbootin doesn't work, so I got the 474 version of it, and finally I was able to select from the option menu and it didn't hang. However when I clicked on Install Ubuntu, it just stopped there for a while, and then the boot failed and moved onto Windows 8 again.
    I looked at the USB drive, and I realized the folder and some config files are names isolinux instead of syslinux, so I changed them, and now I'm getting the "SYSLINUX 3.86 2010..." words on the black screen and it hangs there.
    I saw a similar message before using Pendrive and it was like "SYSLINUX 4.10 2012...". That was because the flash drive wasn't formatted in FAT (it was FAT32). So I re-checked the drive, but it is indeed formatted in FAT so I'm not sure why now I'm getting a similar message.
    It will be much appreciated if you could give me some suggestions as to how to solve this problem.
    Thanks

    Something else you could try.  Not sure it will make any difference.
    Skip the boot creation tools and just boot the thing in UEFI mode.
    Use the latest (12.10 or later will work, IIRC) 64-bit Ubuntu ISO.  Format your flash drive as a single FAT32 partition.  Extract the contents of the ISO to the flash drive.  Use 7zip for Windows, or your favorite Linux de-archiving tool.  That's it.  
    [edit] I don't believe the partition needs to be set active, but haven't tested that.
    Set BIOS boot mode to UEFI.  Even secure boot mode should work withe a new enough Ubuntu - but isn't necessary.
    Give that a try.  If it still barfs at the same place, mess around with the start-up graphics options.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • (Grub) Dual booting with XP on sdb

    My goal is to be able to dual boot with two hard drives: Arch on sda and Windows XP on sdb.  With help in the #archlinux IRC I've managed to get Windows XP to boot by getting the menu.lst correct but when I click "Start Windows Normally", or "Start in Safe Mode", etc. etc. the computer just reboots. A cellphone picture of that all well known Windows black Screen: https://www.dropbox.com/s/nrczq86vsi6o9 … 6%20AM.jpg
    My fdisk -l and /boot/grub/menu.lst:
    http://pastebin.com/sLUUsCcU
    To see if my xp hard drive was still intact I did this:
    sudo mount /dev/sdb1 /media && ls /media/
    and saw this:
    boot.ini NTDETECT.COM pagefile.sys System Volume Information
    Documents and Settings ntldr Program Files WINDOWS
    nano /media/boot.ini
    [Boot Loader]
    Timeout=30
    Default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
    [Operating Systems]
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows" /noexecute=optin /fastdetect
    I've consulted all the wiki's and forum posts I could find but at this point, I'm just stuck.  Somehow I think the final result is me reinstalling both OSs and starting again from scratch.
    Any help or advice on getting a fully functional Windows XP on /dev/sdb would be greatly appreciated

    Pres,
    Thanks for the post.  If I click "Last Known Configuration" the computer just reboots and I'm back where I started. Yeah, my Arch is working fine. My thought process behind re-installing Arch was that maybe the installation process would deal with the Grub config of /dev/sda and /dev/sdb automatically somehow and make everything OK...

Maybe you are looking for