Dual Function Button

I have a series of panels that slide into position when selected. I have a button on each panel with an arrow pointing to the right indicating a transition to the open state. I have created the interaction that when clicked 'we' move from the "Home" page/state to "Card#1" page/state. Now I want to spin the button 180 degrees so it is now pointing left (the closed/home page/state) and on click I now want the functionality to reverse and move the card back to the "Home" page/state from "Card#1" page/state. Because I do not know how to add the dual functionality I need help. I can conceive of two solutions:
1 - create a second button that is identical to the first and on the transition replace the first "Open" button with the second which will have the interactions to "Close" the "Card#1" page/state returning to the "Home" page/state. But this just adds overhead and more graphics to an already graphically intense project.
2 - figure out how to somehow trigger a change in functionality, based on the current page/state and just use the one button. Something like...
          If page/state = "Home"
               Button Interaction = transition to "Card#1" page/state
          else
               Button Interaction = transition to "Home" page/state
Can anyone offer some advice on what my best approach might be?

I figured this out. Using the "When in State" functionality while defining the button interaction did the trick.

Similar Messages

Multi-Function Button

I have a quick request for a tight deadline. Hopefully this
is simple...
I have one timeline with voice over that plays (linearly)
through several slide - Each slide is designated with a frame
marker. I want a forward and back button, but I want them to have
dual functions (as noted in the topic summary).
Basically, it's the old: If you click the back button
quickly, the navigation will replay the current slide (i.e. back
one marker), but if you hold down the button for more than 2
seconds, it replays the previous slide (i.e. back two markers).
Obviously the same goes for the forward button but in the other
direction.
I am lost because I knew how to do this with Director, but I
am not completely up on Flash scripting and I have too much to do
tomorrow to figure it out.
Any help would be greatly appreciated. Thanks in advance.
p.s. I forget if there is scripting to go back one marker or
two markers, but if I have to customize each button (on each slide)
to manually go to a specific slide, that's fine. It's really more
important that I figure out how to detect the difference between a
quick click and a long click. I assume some kind of counter on the
click?

Take a look at this article that I have on my site here:
http://explorinlauren.com/repository/flash/actionscript/using-set-interval-to-pause-timeli ne.html
You can use a function that calls this setInterval script in
you btn.onPress whereas you could use another function that runs
when you do btn.onRelease. Let me know if this is too confusing and
I could try to explain further.

Position change of function buttons in Layout sheet

Hi Experts,
In my planning layout, the planning function buttons like copy and delete push buttons are close to each other.So if i want to arrange them logically related close to each other, how i can do that ?
Thanks.

Hi,
This is in BI WAD template I assume? If you are looking for rearraging multiple buttons you have created using Button Group Item, you can do that in the properties of the button group item (arrows to move button up and down). The buttons in one button group item always appear close by to each other so if you are looking at more space or arranging them on the page, use multiple button group items and arrange them using container layout item(s).

Callmanager End User Dialog Box will not display Function Buttons

When I go to USER MANAGER - END USER all of my function buttons are missing. There is no:
ADD NEW
SELECT ALL
CLEAR ALL
DELETE SELECTED
Also, I cannot edit the existing users even though I am logged in as Administrator. Please see the attached screenshot with the missing buttons. Is this a misconfiguration or could the software be corrupted?
Thanks,
Ron

Chris:
I just have a VoIP lab, therefore I don' t have an LDAP server. I did create a modifed end user group, however I deleted all of the users from that group. Is there any way to restore the creating/editing of users without reinstalling the CUCM image?
Thanks,
Ron

The Function Buttons are Greyed Out in Numbers

I am new to Numbers having used Excel for years. I am trying to add up a column of figures but when I highlight the column and click the 'Function' button at the top of the page, all the functions are greyed out so not usable. Can someone tell me what I am doing wrong?
I am using Numbers 3.1, downloaded on Saturday.
Thanks

clarie,
select multiple columns, then drag the quick sum tag or use the formula:
=sum(<RANGE1>, <RANGE2>, <RANGE3>, ...)
where <RANGE1> thru <RANGEn> are any valid ranges
e.g.
=sum(A:C) will sum columns which would be the same thing as:
=sum(A, B, C)
you can also sum rows 1, 4, and 7 like this:
=sum(1:1, 4:4, 7:7)

PDF Documents with Functional Buttons - Works for IE and FireFox but not for Chrome and Safari

To all,
Good morning. Our institution developed a PDF document with functional buttons for printing and e-mailing. When the document is viewed via Internet Explorer and Firefox, the functional buttons work as expected. However if the document is viewed via Chrome and Safari, the functional buttons do not work. The workaround for those who are using Chrome and Safari, the PDF document needs to be saved to their local drive before the functional buttons work.
Has anyone experienced this issue before? If yes, what was your solution other than the workaround.
Thanks.
Babylon5

Here's how to configure your browser to run Adobe Reader: http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html

Function Buttons Problem on my ZiiO

My function buttons(search, home, list, back) on my Ziio 7" are not working lately. I even tried resetting my factory settings and nothing happened. The problem's there to stay. Can anyone help me? And if possible, I need to know other ways on how to solve my problem.

Well, yes, the function buttons are not working. Tried doing long presses too. Turns out my function buttons have moved to the screen, above the function buttons. Just wanting to figure this out. By the way, I got my Ziio on June 8.

Function Buttons Problem

Hello,
few function buttons ( the buttons near the Power button) just dont work. they do nothing !
Is there any Toshiba application that will help me configure them?
i have a Portege m800 laptop.
Thanx , Vedran.

Well, yes, the function buttons are not working. Tried doing long presses too. Turns out my function buttons have moved to the screen, above the function buttons. Just wanting to figure this out. By the way, I got my Ziio on June 8.

I play Hotties for Sale but the function buttons Home, Refresh, Go back, have disappeared. How do I get them back? are missing

I was trying to find out how the page info link works and I lost the function buttons Home, Refresh, Go back on Hotties for Sale. I do not know how to get them back. I have contacted Hotties For Sale help but they have not replied. Can you help please?

* If the menu bar is hidden then press F10 or hold down the Alt key, that should make the "Menu Bar" appear
* Make sure that the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* If items are missing then open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
* If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
* If you do not see that item then click the "Restore Default Set" button to restore the default toolbar set up
See also:
* http://kb.mozillazine.org/Toolbar_customization
* [[Back and forward or other toolbar buttons are missing]]
* [[Navigation Toolbar items]]

The function button in HP G62 series

i have HP G62 a20SE notebook, with win 7 64 bit installed
i had to format my notebook
after installing the drivers, i noted that the function button (fn) is not completely working
for example to rename a file or folder i usu. press fn+f2 but now it's not working? i don;t know why?
besudes, when i press the function button it usually gives me a bar on the top of the screen with all the functions
now it is not
how can i have it back?
please help...

Hi,
czeemo wrote:
i have HP G62 a20SE notebook, with win 7 64 bit installed
i had to format my notebook
after installing the drivers, i noted that the function button (fn) is not completely working
for example to rename a file or folder i usu. press fn+f2 but now it's not working? i don;t know why?
besudes, when i press the function button it usually gives me a bar on the top of the screen with all the functions
now it is not
how can i have it back?
please help...
Can you still access the Recovery Manager with the F11 key?
Option 1: You can install the original drivers from the recover manager.
Option 2: Do you have an HP Recovery disc set?
Disc #2 has all of the original drivers.
Drivers for Windows 7 64-bit are here. Install the QuickLaunch software.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I want to remap my macbook function buttons without pressing fn

Hi
I have a new MBP
I have unchecked the box that lets me use function keys for other than their original purposes
So now I can use e.g. my last volume button to work instead as a Mission Control / Show desktop function that is really useful for me as I have one funcitonal hand.
However I'd like to remap or reassign the function buttons. For example my F1 F2 now do nothing - I could assign them to certain other functions, but I'd like to assign them back to screen brightness.
Is there a way I can do this?
And is there a way i can consign the dashboard to the bin, and use that button for something thats actually useful ?
(Sorry for the repost, I accidently placed it first in a macbook forum)
Thanks,
tom

You can install this into OS X and access the files on Windows side and transfer them to a external drive.
http://ntfsmounter.com/
You can also use Winclone to clone Windows (from OS X) to a external drive.
Once you got a copy of your files off both partitions...
You can insert the OS X disk of the OS your using into the computer and reboot holding c
On the second screen you have the option to reinstall OS X (and bundled apps) overwritting what you already have. Your files, account's and third party programs should remain though.
Use the uninstaller of the program to remove it.
If you want to erase everything in your OS X partition you can use Disk utility from the installer disk, it's under the Utilities menu in the Installer.
If you accidentially select your hard drive you can erase both partitions.

Function Buttons dont work on my Satellite P300-1FN

Hi,
I am having problems with the Function Buttons on my Satellite P300-1FN Laptop.
I recently installed Vista SP2 and flashed the BIOS and now the buttons have stopped working and LEDs lighting them wont turn off when the Mute or LED On/Off button is pressed. I have installed the newest Value Added Package but that has not helped. I have had this problem before without SP2 or the new BIOS installed and found that going in the BIOS and resetting it to default would work but it hasn't this time.

If I am remembering well in Toshiba HWSetup tool must be one tab for this button.
Check please what options is defined there.
Try to change it.
Please post the results.

Function Button Problems

Last night I downloaded the latest OSX update onto my iBook. Previously, the function buttons 1 through 5 worked and I could change my volume and brightness at a whim, but now I noticed that they simply do not work, even the number lock doesn't, which I find odd. I have gone through the System Preferences several times and cannot find a way to fix it. Is it the update or is something wrong?

Hi Ladreo and welcome to Apple Discussions.
Go to System Preferences>Keyboard & Mouse and select the Keyboard tab. Ensure that the box isn't checked against "Use the F1-F12 Keys to control software features". I just enabled this on my iBook and id does affect num lock as well.
Hope that helps,
Adrian

IPhone 3G headset function button schematic

Hey all. I am trying to figure a couple of things out in regards to the function button as on the standard iPhone headset.
I have a motorcycle, and an older Autocom system (a helmet radio / voice switcher / etc), and am trying to integrate my iPhone. To do so, I need to make a male-male 3.5mm 4-pole TRRS cable, as nobody really seems to make one anywhere that I've been able to find. I've seen the various pin-outs for the wires if one wanted to simply go from connector A to connector B, but I am trying to find out how to wire in a function button (this way I can reject a call, pause playback, skip tracks, etc, without having to actually look at or touch the phone while I'm riding).
I have found several pretty useful diagrams, the best of which is at this link:
http://www.advrider.com/forums/showthread.php?t=276870
The overall schematic of what I need to do here (as near as I can tell) is as follows:
Tip (right speaker) --> Tip (right speaker)
Ring1 (left speaker) --> Ring1 (left speaker)
Ring2 (ground) --> Sleeve (microphone)
Sleeve (microphone --> Ring2 (microphone)
Supposedly one should be able to wire in a momentary switch, on the Ring2 and Sleeve wires. When this switch is activated, is how the phone interprets the function button being pressed, and does whatever it is the phone is programmed to do when that happens.
What I am trying to figure out, basically, is how this switch works: a typical momentary switch is in either an always-open or always-closed state, and the switch action occurs when the circuit is either closed (as in an always-open switch) or opened (as in an always-closed switch). Push a button, switch is activated. Let go of the button, it returns to its normal default state.
That would, however, imply that either Ring2 (ground, on the iPhone side), or Sleeve (the microphone, on the iPhone side) is either always disconnected, and the phone recognizes a function-button action when that circuit is completed momentarily; or, that the phone interprets a headset-function-button-push when that connection is interrupted. It could also be that the connections should be switched (Ring2 -> Ring2, Sleeve -> Sleeve) in order for that to happen. I really don't know.
Does anybody here have any insight? In a nutshell, what I am trying to find out is how the iPhone recognizes that the function button on the headset has been pushed.
Thanks very much, all!
Dan

Nevermind, actually, I just answered my own question, sorry everyone.
If anyone is curious, shorting out the microphone signal to the ground is what activates the function button.
Doh!

Function button on Satellite L500 causes Blue Screen Of Death

Ok I have an Satellite L500 and I got it back in December 2009. Ever since I first got it, if I ever press the function button the BSOD appears and the computer restarts. I dont particularly use the function button often, but its just in case I press the wrong button and its a nice feeling not to have a laptop-suicide button haunting my keyboard.
Also if I decide to shut down the laptop completely, and turn it back on at a later time, its likely that it will appear then as well. I have no clue as to why this is but any help would be appreciated.
Thanks a lot
A. Mcstea

Hi buddy,
And what operating system do you use? Does it happen with preinstalled Windows from Toshiba recovery disk?

Dual Function Button

Similar Messages

Maybe you are looking for