Dual Layer DVD Burners?  (Best Choices)

What are people having the Best luck with Dual Layer DVD wise?
I have an older G4 (as seen on bottom of post)
I've been reading that the DVD+ format is the way to go as far as Dual Layer DVD is concerned..
Does that mean I wouldn't be able to play it back on my single layer SuperDrive?
Thanks,
Eric

Can't anyone give me a couple of good choices for Dual Layer DVD Burners for the G4?
I know that LaCie makes one, are they're any better choices?
Thanks Again,
Eric
Which model of LaCie, or others are recommended?
(or not recommended?)

Similar Messages

  • Best strategy for buring dual layer DVD

    I've got a project that won't fit on a single layer DVD, so I've got it set up for dual layer and "best quality" which results in a 7.38GB disk image.  However, iDVD 8 warned me when burning the disk images that some utilities may not be able to burn a reliable dual layer disk copy and to use iDVD instead, does this include Disk Utility?
    I always use Disk Utility to make copies, iDVD took almost 7 hours to burn the disk image, I can't afford to wait that long for each copy.  So what's the best strategy for burning dual layer DVDs?

    subsequent copies burn in far less time immediately after the first provide you don't quit iDvd
    If you know ahead of time you'll need more than a few copies, I'd recommend burning from a disc image to the desktop and reducing the burn speed (4x or lower) I prefer to use Roxio Toast myself. But others have had success with Apple's Disc Utilities as well.

  • Best compression setting 90min movie on Dual Layer DVD

    Okay, I admit, I am a total n00b at this...so sorry if you have to break things down into the most basic terms...
    I am trying to get the BEST quality I can for my adobe Encore project (for ease of calculation, 90min movie and added features).  I was previously getting "exceeds dvd capacity" error in Encore. 
    I have decided to recompress and see what I can do to make it all fit, but first I want to re-evaluate my whole process...
    the ultimate issue comes down to three things (i think)...
    1. CBR v VBR??  what is better and why?
    2. What Data Bit Rate to compress at and why?
    3. Single layer DVD vs Dual Layer DVD?  Which is better and why?
    to begin the discussion, I'll tell you what I "know" and what I think.
    It seems DVD players can only handle a max bit rate of 8mbps so I don't want to go over that and using a Dual layer disc I risk that it may not work on older players....also, the dual layer costs twice as much to duplicate (this sucks but money is not an issue at this point, quality is more important).  From what I have read, constant Bit Rate @ 8mbps will give me the Best possible image... 8 is the max and so to encode at 8 the entire time should be the best..  will i have any issues with this?  This is not an amateur home movie but rather an indie feature film so I want to get the best possible viewable product out to people.  I will have blu-ray questions to come later (thats what we are going to send to festivals).
    any help would be greatly appreciated
    thanks so much...
    chris

    Okay, thanks for everyone's thoughts.
    Question....
    I totally understand not wanting to waste space on a dvd IF there was extra room.... HOWEVER, a movie at 90min with menus, etc. BARELY fits on a dvd at a 6.8mbps VBR compression rate....
    therefore....why not just fork out the extra couple bucks and just compress the whole thing at 8.0mbps 2pass CBR, slap it on a dual layer and even though there will be parts of the movie that will be higher than necessary, and there will be leftover space on the dual layer dvd.... you will be guaranteed to have the highest quality right?  heavy motion areas and more static areas will all be encoded at 8 and thus, the best....
    am i wrong in thinking this?
    and after some extensive reading and research....Although is says a dvd player can handle 9.8mbps..... it doesnt' seem safe to encode that high because a lot of players can't handle it.... what is everyone else's thoughts?
    I found this:
    Data rate 
    DVD-Video discs have a raw bitrate of 11.08 Mbit/s, with a 1.0 Mbit/s overhead, leaving a payload bitrate of 10.08 Mbit/s. Of this, up to 3.36 Mbit/s can be used for subtitles and a maximum of 9.80 Mbit/s can be split amongst audio and video. In the case of multiple angles the data is stored interleaved, and so there's a bitrate penalty leading to a max bitrate of 8 Mbit/s per angle to compensate for additional seek time. This limit is not cumulative, so each additional angle can still have up to 8 Mbit/s of bitrate available.
    Professionally encoded videos average a bitrate of 4-5 Mbit/s with a maximum of 7–8 Mbit/s in high-action scenes. This is typically done to allow greater compatibility amongst players, and to help prevent buffer underruns in the case of dirty or scratched discs.

  • Unable to Burn Anything to Dual Layer DVD

    Greetings,
    I have a new Memorex MRX-530LE dual layer burner, and I have verified that I do have the latest firmware from the manufacturer.
    I am able to burn dual-layer DVDs with no difficulty using NERO. I am unable to burn a dual-layer DVD backup with iTunes 8. I have verified this with two different brands of DVD+R9 (DL) media, and I have verified that I am easily able to burn backups using single-layer DVD-5 media.
    Can anyone verify whether iTunes 8 supports dual-layer at all? I have searched the forum and find nothing more recent than 2006, and am hoping that others have now experienced my situation, since DL media and burners are common today.
    Best regards and thanks in advance,
    Scott

    Hi. I am having the same problem. I have already done one backup and I want to do an incremental backup, but when I insert the DL+ disc it tells me that I will need 14 disc. My itunes is only 6.5 gigs?
    I think it's a bug.
    dedit

  • Incompatibility issues with Dual Layer DVD+R  help?

    I think I've made a serious mistake in believing I could author a Dual layer dvd for replication and sale on my own. I've spent over 14 months on this film, which is working perfectly in Encore, complete with extensive menus and transitional movies.
    I've done my best to transcode the media in the most compatible way (keeping bitrate below 7mbps and using dolby digital audio format) BUT I'm still having bad luck with MOST dvd players.
    The DVD plays properly on my cheap sony player, but both my toshiba and humax/tivo players failed to read the disc. (multiple tries/burns....or coasters, now) I've read that there are common problems with dual layer +R.
    MY QUESTION IS: what is the BEST POSSIBLE WAY to author/burn this project for mass replication? Can I really achieve the result I'm looking for with Encore or will I have to give up and go to a professional authoring house with DLT capability?
    Will I get the best result by burning from encore straight to disc OR burning an image or folder, then using a third party burning program?
    Thanks SO MUCH for any responses. This process has been soul-crushing.

    >The DVD plays properly on my cheap sony player, but both my toshiba and humax/tivo players failed to read the disc. (multiple tries/burns....or coasters, now) I've read that there are common problems with dual layer +R.
    Marc, the only mistake I think you are making is in assuming that set top players can handle a written DVD+R DL disc.
    Support in older players is at best sketchy.
    If the disc is working properly in at least one player, then you should be good to go.
    Replication will produce a different type of disc. One that
    i will
    play properly.
    Not all burners support book typing, and unless you know what you're doing here do not use these "fudges". It's best using Plextor, and even Benq burners. The freeware utility IMGBurn has this ability, and it also tells you what burners do this. I've never needed it personally, as my Pioneer burners & Denon players have no trouble with +R DL media.
    What you really need is a player that you
    i know
    plays DVD+R DL discs properly. Once you know your player is good with the format, then all other inconsistencies are player related, not authoring, and not your problem. There is simply no way at all you can guarantee any form of compliance with +R DL media, as there is nothing in the specs that says any set top player has to read these discs. Or -R DL where support is generally even worse.
    Whilst most players will read -R single layer & +R single layer, again there is no mandatory requirement to do so.
    You will need to get these
    i replicated
    and not duplicated. Duplication (burning) will result in a lot of returns, and a lot of wasted money.

  • Sense Error Message when trying to burn Dual-Layer DVDs?

    Hey all,
    I am trying to burn a dual-layer DVD disc with the internal drive in my MacBook Pro.
    I am getting the same error message from Toast each time I try to burn a disc. I get no response from Disk Utility (it just says "waiting for the disc drive") and Finder doesn't recognize the dual-layer disc when I try to burn in Finder.
    I've heard that it may be a media issue, so I've tried with every single brand of DVDs that I can get my hands on. So far, I've tried Verbatim, Sony, and Memorex. I can't find any other brands of media, even at Best Buy?
    I've heard that it may be a security update that might have caused this issue. System Profiler says that my machine can burn both DVD+R DL and DVD-R DL.
    What is going on?!??

    Welcome to Apple Support Communities
    The two most common suggestions are (a) try other media, which you've done (and Verbatim normally work) and (b) run a DVD Lens Cleaner disc through it to see if some dirt or dust on the lens it causing the problem. If this doesn't fix it then it sounds like a hardware fault and best to let Apple check it out.

  • Dual layer DVD will not play after iDVD burning

    Hi All,
    I am having some trouble making a useable DVD. I have a video that I recorded and imported into iMovie (2h33m long). I exported it to iDVD, which told me that I needed to use a dual layer DVD to make it fit. Here's where I noticed the first problem: iDVD has one option for a dual layer disc, stating that it has 7.7GB storage space, and my discs have 8.5GB. I set it to use the standard setting for the DL disc any ways, turned the quality down a bit to make it fit, and burned the DVD. After burning two discs, I still do not have one that works. It comes up as "supported disc not available" on my Mac, and as a blank disc on any other machine I put it in. It will run on my coworker's brand new iMac, but that is the only one. Am I doing something wrong? The only mistake that I have corrected since I have tried all this is changing the aspect ratio back from 4:3 to 16:9 in iMovie (I am not sure how that happened, as the video was originally recorded in 16:9). I am re-exporting the file to my desktop now in the proper ratio, and changed the quality to HD. I am waiting for the file to encode as we speak. Any help would be greatly appreciated, as this work is for my local school board and is very time sensitive.
    I am running a 28" iMac, 2.66GHz Intel i5, 8GB RAM, 1TB hard drive on OSX 10.6.8.

    I set it to use the standard setting for the DL disc any ways, turned the quality down a bit to make it fit, and burned the DVD.
    That part I don't understand.
    iDVD encoding settings:
    http://support.apple.com/kb/HT1502?viewlocale=en_US
    Short version:
    Best Performance is for videos of up to 60 minutes
    Best Quality is for videos of up to 120 minutes
    Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
    That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
    Professional Quality: The Professional Quality option uses advanced two-pass technology to encode your video (The first pass determines which parts of the movie can be given greater compresson without quality loss and which parts can’t.  The second pass then encodes those different parts accordingly) , resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned about the time taken.
    In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
    You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
    Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
    NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
    And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
    http://support.apple.com/kb/HT1502?viewlocale=en_US

  • Which dual layer DVD discs to use with my new iMac???

    I just purchased a new iMac from Apple, and would like to know which Dual layer DVD discs work best. Does Apple sell their own DL discs?
    Thanks,
    Bryan

    I highly recommend DVD+R DL discs by TDK. I use TDK almost exclusively for all my disc burning needs (the other brand I recommend for CD's is Philips, but they are hard to find).

  • Dual layer DVD compatibility list

    Hello,
    is there a list of the best dual layer DVDs which can be used with a Macbook pro? I had a Mitsubishi DVD+R DL, which did not even begin burning at two different Macbooks, and failed during half of the burning process on a third Macbook. Since they are more expensive than ususal DVDs, I would appriciate if anyone can highly recommend certain brands so I don't have to buy and test every single brand.
    Thank you.

    I have Verbatim 8x DVD+R DL discs which work fine in my Mac Pro but do not work at all in my MacBook Pro (late 2008).
    If I burn a data DVD on the Mac Pro, the MacBook Pro tries to read the disc but ejects the disc without mounting it.
    If I insert a blank DL disc into the MacBook Pro it ejects it after several seconds without offering to do anything with the disc.
    I know that the technical specifications for the MacBook Pro says up to 4x burn speed for DL, but shouldn't I expect the drive to be able to read the discs?

  • Dual Layer DVD Stock

    Has anyone had any good / bad experiences with any brand of dual layer DVD stock? I'm getting ready to start a project and I have an external LaCie dual layer burner that I want to burn to. Thanks in advance!

    I have also had miserable luck with Memorex DVD-R DL blanks. The only ones that verify at all are those that I burn at, 1x and two out of three of those are coasters. At $3 each that's really annoying.
    I think I'd have gotten more enjoyment out of lighting cigars with the $60 I paid for the 20 discs rather than giving it to Staples for expensive coasters.
    Taiyo Yuden, Fuji, and newer Verbatim seem to be the best mfg of DVD-R DL blanks. But their stuff is still pricey. Mitsui also makes great blanks, but I don't know if they are making DVD-R DLs yet.
    Check out this website that rates optical media:
    http://www.digitalfaq.com/media.dvdmedia.htm
    I did find a vendor who would sell me Taiyo Yuden DVD-R DL blanks for $1 ea., but I needed to buy a minimum of 300.
    Beware that if you are burning a DVD-Video disc via DVDSP to one of these beauties, DVDSP does not verify the burn afterward like Toast or the built-in OS X disc burner.
    So you may not be aware of errors in your disc. Watch out for this if you are burning a disc to send off for mastering.

  • Dual Layer DVD media help

    Does anybody know what DVD +R or -R Dual Layer media is compatible with Macintosh (specifically, Dual 2.5 Ghz G5 running the Final Cut HD Studio.
    I tried Fujifilm DVD+R DL and DVD Studio Pro 4 did not recognize the disc when I tried to build/burn the disc. The Apple Store does not sell any Dual Layer DVD media and Best Buy only had the aforementioned media available for sale.
    What do the Hollywood studio use for their dual layer media?
    Thanks!

    Hi David,
    I authored a dual layer DVD a few months back and had no problems with Memorex DVD+R DL media. They came in 15 disc packs.
    I'm in Miami, so I can't say what the Hollywood studios are using for one-offs, but the dual layer DVDs you rent
    from BlockBuster or NetFlix aren't recordable DVD media discs. They're DVD-9 discs from a replication facility.
    Cheers and happy authoring,
    Jeff

  • Dual layer DVD-ROM in a SuperDrive

    I have a dual layer DVD-ROM created on a Pioneer USB dual layer burner. The disc plays fine in the Pioneer, but does not mount in the SuperDrive of my PowerBook or G5 tower. Should the standard SuperDrive be able to read the disc? It can read a dual layer movie disc without problem.
    All the best,
    Tom

    I might be in the wrong forum, but what the heck. I have a similar problem. I have a two week old 17" PowerBook G4 with the new Superdrive that writes in DVD-DL. Anyway, I backed up a ton on data from a variety of computers I had around here (20 Dual-layer DVDs) by copying and pasting data to the DVD-DLs using the finder in Tiger. They work fine on the PowerBook but will not play on a 1st generation 20" iMac G5 (1.8 GHz, 1GB SDRAM, running 10.3.9) with a Superdrive. It just spits them out. I thought that older Superdrives could play (but not write to) DL DVDs. Any suggestions on how I can get them to play on older Macs with Superdrives (i.e. 867MHz PowerMac G4 Quicksilver, Flat Panel iMac G4s, and 1st generation iMac G5s)?
    Thanks

  • Dual Layer DVD Capacity, and Recommended Media?

    Hey All,
    Just a few quick questions. What is the formatted storage capacity of a Dual Layer DVD? I know that the listed size is 8.54 GB, but is that what you can actually get on the disc, or is it less than that? I have so much content that I'll need to cut things to make room, so I need to know exactly how much stuff I need to cut.
    My second question is if anyone has some recommended dual layer media. I'm looking for whatever will work well with the burners that Apple uses in their Macs, and unfortunately Apple doesn't offer DL DVD's. Thanks!
    20" 2Ghz G5 iMac   Mac OS X (10.4.3)  

    Hi,
    I usually dont go more than 8.1-8.2 it could take more, but from my experience, if its to full, stuff will freeze on it, Once my audio was un-sync, I toke some off, and it whent find.
    Hope it helps

  • Oh no, its me again re: burning on dual layer DVD's !!

    I had posted a couple of issues yesterday re: trying to burn a project of 4.25 gb using the white moving panes menu from idvd 06 but setting it to dual layer to get best performance. If I changed the settings (and use a single layer dvd) the project size would kick down to 2.5 gb which to me means less than acceptable quality. Since having issues with my G5 (as it would finish multiplexing and then kick out a message "mulitplexer error-error during formatting"), I hooked up my imac with 225 gigs and did DVD One set to dual layer with no problems and crystal clear video. Then this morning, tried to burn Part Two (with 4.21 gigs) and got the same message I got yesterday re: formatting. Lots of space on the imac hard drive. Using Verbatim brand DVD's. Really frustrating. Anyone had the same issue?

    Joe (and SD)
    Have idvd 08 but wanted to use a menu from 06. Solved the problem with some direction from the Roxio user group . . . here was the recommendation from a reply (who owns a very nicely restored Austin Healey) after listing the issue there:
    "Toast does not change the contents of a disc image when burned in the Copy window. So it can't remove menus. Control click on the iDVD disc image and choose Mount It from the Contextual menu (or choose Mount in Toast when you've selected it with the Image File setting in the Copy window. Now preview it with DVD Player. (You may need to press the space bar in iDVD to get the main menu to appear). If DVD Player doesn't automatically select it you can choose Open DVD Media from the DVD Player File menu and then choose the VIDEO_TS folder that's in the mounted disc image".
    Turns out my G5 is the issue. Tried it there first and even though I could see the menus being created in the disc image process, it still only played the movie. When I duplicated the steps on my imac - all came out fine.
    Thanks again SD for your help. Maybe this time I helped you (for a change).

  • Deciding layers on dual layer DVD

    Is it possible to controll what material comes on what layer on a dual layer DVD?
    I can imagin it would be best if the feature movie and all related assets (5.1, stereo and commentators audiostreams) all reside on one layer, while the menues and everything els resides on the other layer.
    Is this possible, and if so, how?
    cordially
    Per

    You can make an estimate of the size of the assets (the audio is all on the same track if you are using alternate audio streams so really no way to move them unless using multiple video tracks with different audio)...you can move items in the outline view up and down to change the VTS is built to, and the first side has to be larger.
    The real benefit is to keep things together so they do not have to cross the break point when playing
    Menus are basically at the beginning of the disc

Maybe you are looking for