Dump observed while posting the Idoc to the application server

An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_FILE_AUTHORITY', was not
caught in
procedure "WRITE_TO_FILE" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The ABAP program "SAPLEDI7" attempated to execute a statement with which
the system automatically checks authorizations and for which the
user "BOSE7620" has no authorization.
the above dump was observed when running a Z-transaction which is a Variant transaction of WE14.
What is the reason for the dump.
Thanks,
Nishant

It might be some authorization issue, you can check it via enabling the trace in ST01.
Regards,
Subhash

Similar Messages

Error while accessing the application server file

Hello,
When I try to load the data from CSV file to PSA , I am getting following error message
"Error while accessing the application server file"
"Errors in source system"
I gave the right file path
I am not sure about this error message.
Thanks,

Hi ram,
if you have more than one application server running in your BI system (see at transaction SM51) be aware that your infopackage will be executed on the right one. Each application server has its own file system and your job need to run on the server your file is stored on.
Also check if the os user of the SAP system itself (<sid>adm on Unix) has rights to read that file.
Bye
Frank

Error while integrating the application server in jdeveloper?

i am using standalone server connection and given the settings ....
test process is good..all the test connections are successful...
but while navigating to SOA folder. i couldn't find deployed files in soa folder.
i found following error
javax.naming.NamingException: javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://xxxxxxxxxxxxxxxxxxxxxDestination unreachable; nested exception is:
     java.net.ConnectException: Connection timed out: connect; No available router to destination] [Root exception is java.lang.RuntimeException: javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://xxxxxxxxxxxxx: Destination unreachable; nested exception is:
     java.net.ConnectException: Connection timed out: connect; No available router to destination]]
     at oracle.tip.tools.ide.fabric.asbrowser.SOAServerProvider.listBindingsImpl(SOAServerProvider.java:35)
     at oracle.rc.asadapter.context.spi.AbstractContextProvider.listBindings(AbstractContextProvider.java:133)
     at oracle.rc.asadapter.context.spi.DefaultMutableAppServerContext$ContextProviderSupport$3.method(DefaultMutableAppServerContext.java:384)
     at oracle.rc.asadapter.context.spi.DefaultMutableAppServerContext$ContextProviderSupport$MethodCall.invoke(DefaultMutableAppServerContext.java:421)
     at oracle.rc.asadapter.context.spi.DefaultMutableAppServerContext$ContextProviderSupport.listBindings(DefaultMutableAppServerContext.java:381)
     at oracle.rc.asadapter.context.spi.DefaultMutableAppServerContext$ContextProviderSupport.access$500(DefaultMutableAppServerContext.java:314)
     at oracle.rc.asadapter.context.spi.DefaultMutableAppServerContext.localListBindings(DefaultMutableAppServerContext.java:207)
     at oracle.rc.asadapter.context.spi.AbstractEventDirContext.listBindings(AbstractEventDirContext.java:185)
     at oracle.adf.rc.spi.jndi.AbstractDirContext.listBindings(AbstractDirContext.java:214)
     at oracle.rc.asadapter.context.spi.DefaultAppServerManageableContext.getManageables(DefaultAppServerManageableContext.java:58)
     at oracle.jdeveloper.asnav.nodes.DefaultManageableFolder.loadChildren(DefaultManageableFolder.java:327)
     at oracle.jdeveloper.asnav.nodes.DefaultManageableFolder$4.run(DefaultManageableFolder.java:288)
Caused by: java.lang.RuntimeException: javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://xxxxxxxxxxxxx: Destination unreachable; nested exception is:
     java.net.ConnectException: Connection timed out: connect; No available router to destination]
     at oracle.tip.tools.ide.fabric.asbrowser.WeblogicSOAServer.initPartitions(WeblogicSOAServer.java:89)
     at oracle.tip.tools.ide.fabric.asbrowser.WeblogicSOAServer.<init>(WeblogicSOAServer.java:68)
     at oracle.tip.tools.ide.fabric.asbrowser.ASBrowserHelper.listWeblogicSOAServers(ASBrowserHelper.java:275)
     at oracle.tip.tools.ide.fabric.asbrowser.ASBrowserHelper.listSOAServers(ASBrowserHelper.java:201)
     at oracle.tip.tools.ide.fabric.asbrowser.SOAServerProvider.listUserObjects(SOAServerProvider.java:54)
     at oracle.tip.tools.ide.fabric.asbrowser.SOAServerProvider.listBindingsImpl(SOAServerProvider.java:21)
     ... 11 more
Caused by: javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://xxxxxxxxx:7021: Destination unreachable; nested exception is:
     java.net.ConnectException: Connection timed out: connect; No available router to destination]
     at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
     at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:788)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:368)
     at weblogic.jndi.Environment.getContext(Environment.java:315)
     at weblogic.jndi.Environment.getContext(Environment.java:285)
     at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
     at javax.naming.InitialContext.init(InitialContext.java:223)
     at javax.naming.InitialContext.<init>(InitialContext.java:197)
     at oracle.soa.management.internal.facade.ServerManagerImpl.<init>(ServerManagerImpl.java:76)
     at oracle.soa.management.internal.facade.ServerManagerFactoryImpl.createServerManager(ServerManagerFactoryImpl.java:28)
     at oracle.tip.tools.ide.fabric.asbrowser.WeblogicSOAServer.initPartitions(WeblogicSOAServer.java:85)
     ... 16 more
Caused by: java.net.ConnectException: t3://xxxxxxxx:7021: Destination unreachable; nested exception is:
     java.net.ConnectException: Connection timed out: connect; No available router to destination
     at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:216)
     at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:170)
     at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:353)
     ... 26 more
Caused by: java.rmi.ConnectException: Destination unreachable; nested exception is:
     java.net.ConnectException: Connection timed out: connect; No available router to destination
     at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:470)
     at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:321)
     at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:254)
     at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:197)
     at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:238)
     at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:200)
     ... 29 more
i worked out with the statements in help file which is as follows
11.6.1 No available router to destination Message is Displayed When Attempting to Connect to the Administration Server from WLST
When trying to connect to the WebLogic Server Administration Server from WLST using localhost as the host name, the following message may be displayed if the listen-address attribute of the Administration Server has been restricted to certain IP addresses:
javax.naming.CommunicationException [Root exception is
java.net.ConnectException : <t3://HOST:PORT> : Destination unreachable;
nested exception is: java.net.ConnectException: Connection refused; No
available router to destination
Workaround
Use either of the following workarounds:
    Check that the listen-address attribute of the Administration Server has been set correctly in the domain configuration file. You can either remove the listen-address line or simply comment it out. Oracle recommends that you comment it out in case you need to know the value at a later time. For example, in the domain configuration file:
    <server>
       <name>AdminServer</name>
       <ssl>
       </ssl>
       <machine>machine_name</machine>
       
    </server>
    Use the host name of the Administration Server, instead of localhost, in the WLST connect command.
i removed listen address in config file..but i am still facing with same error
Edited by: 947453 on Jul 25, 2012 7:09 PM

Hello,
Were you able to resolve this? I am facing the same issue where my JDev is on a separate machine from the SOA server. Where is the "domain configuration file" located? I am running 11.1.1.6. Within JDev all the other options for the Application Server (Deployments, Servers, Web Services) return results quickly. SOA is throwing the error you mention.
Thank you.

Error while configuring the application server for ESB on Jdeveloper

While i try to configure a application server connection on Jdeveloper for a remote installation of ESB (advanced mode with all the three components together and not in a cluster mode) i get the following error :
Error getting OC4J Process for: opmn-home+oc4j-10.10.36.21-6003-default:
Error connecting to OPMN (is it running?): Connection refused: connect
All the OC4J processes are running on the server as i get the following output for the ./opmnctl status command :
[oraclesoa@esboid2 bin]$ ./opmnctl status
Processes in Instance: home.localhost.localdomain
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
OC4JGroup:default_group | OC4J:oc4j_soa | 10000 | Alive
OC4JGroup:default_group | OC4J:home | 9999 | Alive
ASG | ASG | N/A | Down
HTTP_Server | HTTP_Server | 9998 | Alive
The installation is on a Linux box.
I give the following details in the connection properties box in Jdeveloper :
host : 10.10.36.21
opmn port : 6003
oc4j instance : home
Also the opmn port is correct :
[oraclesoa@esboid2 bin]$ ./opmnctl status -port
esboid2:6003
Any ideas on this?
Message was edited by:
Nilay

i tried with taht.....same error.......is this an issue with port 6003 on the server........it is a linux server and I cannot telnet to it......i can use SSH though.......how to know whether the opmn port(6003) is open or not?.....

Error while booting the application server

CMDTUX_CAT:1685: ERROR: Application initialization failure
CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error ha

I get the same error ( (ERROR) nssock: Cannot listen on host bin/ in port 7180. it may already be in use for AF_INET6) booting the domain on a SuSE Linux box. I switched the port to 7190 thinking it might be a conflict, but get the same message in the PSRENSRV log each time I boot the domain. Despite the fact that this error recurs in the logs, the service shows as listening on the port ... however RENSERV is not working at all ... test page ping can't find it.
update ... I'm all fixed up now. There were a series of unrelated items leading me down rabbit holes. The first of which was my domain was booting, and I could see the port was listening via netstat ... situations around the above error all involved a domain not booting. I was also receiving a "Error retrieving REN server URL from database" in PSUQSRV and PSMCFLOGs which was an erroneous message you get about REN when MCF is turned on. In the end it turns out this little demo web/app box was in a DMZ, and they missed a firewall rule for that port ... no one had run into anything that used REN until now. I set up a temp domain on a machine out of the DMZ that just does REN for now ... they're in the middle of a firewall migration and probably wouldn't be in maintenance mode for a demo system

Error while posting the IDoc for Customer Invoice.

hi,
I m posting Customer Invoice through LSMW using IDocs.
Basic type is FIDCCP02 and message is FIDCC2.
While posting the Idoc I m getting error as:
'Document or line item does not exist for invoice reference'.
I m not getting the error why it is asking for invoice reference because
in FB01 it is not asking for any reference or anything.
Even in f-22 also it is not asking for the same.
In Idoc all the item level values are coming prorperly.
If anybody worked on such issues then please reply.
-Thanx.
-Umesh

Hi,
Where you able to resolve your issue, I would appreciate if you can share the solution.
Thanks

Error while posting Invoice IDOC (The difference is too large for clearing)

Hi All,
While posting Invoice IDOC to Remittance Advice IDOC get fails with status 51 & message ' The difference is too large for clearing'.
Please suggest any solution or reason to fail IDOC.
Thanks & Regards,
Ajay
Moderator message: please search for information and try to find out yourself before asking, this will be a functional problem anyway that should be asked in the appropriate forum, e.g. ERP Financials.
locked by: Thomas Zloch on Aug 20, 2010 1:59 PM

Pls check the tolerance amounts limits:
SPRO--- F/A --AR/AP -
Business transactions -Open item clearing--- Clearing differance---- Define / Assign tolerance groups for emp -
Where you need to change the limits of max amounts with the %
Let me know for any info.
Regards
Suresh

Error while posting the CREMAS03 Idoc

Hi
I a getting the Error while posting CREMAS03 idoc from File
The ERROR: Status 65 ,Error in ALE Servics: Cross Company code does not exits..
but when i cheked with the functional guys , the comany code exits..
Any one have any idea
SV

Hey,
    seems you have given wrong enteries for logical system in sale or in WE20(patrner profile)
Steps for ALE settings:-
Steps for XI
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the R3 system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto IDX1.
     Create a new port.
     Give the port name.
     Give the client number for the R3 system.
     Select the created Rfc Destination.
Step 3)
     Goto IDX2
     Create a new Meta data.
     Give the Idoc type.
     Select the created port.
Steps for R3.
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the XI system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto WE21.
     Create a port under transactional RFC.(R3->XI)
     Designate the RFC destination created in prev step.
Step 3)
     Goto SALE.
     Basic settings->Logical Systems->Define logical system.
     Create two logical systems(one for XI and the other for R3)
     Basic settings->Logical Systems->Assign logical system.
     Assign the R3 logical system to respective client.
Step 4)
     Goto WE20.
     Partner type LS.
     Create two partner profile(one for XI the other for R3).
     Give the outbound or inbound message type based on the direction.
Step 5)
     Goto WE19
     Give the basic type and execute.
     fill in the required fields.
     Goto IDOC->edit control records.
     Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
     Click outbound processing.
Step 6)
     Go to SM58
     if there are any messages then there is some error in execution.
     Goto WE02.
     Check the status of the IDOC.
     Goto WE47.
     TO decode the status code.
Step 7)
     Not mandatory.
     Goto BD64.
     Click on Create model view.
     Add message type.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.

While posting the Doc thru GM_CREATE_BUDGET taking to short dump

while posting the Doc thru GM_CREATE_BUDGET taking to short dump
giving the message:-
Runtime Errors         MESSAGE_TYPE_X
Error analysis
    Short text of error message:
    System error during characteristic derivation maintenance
    Long text of error message:
    Technical information about the message:
    Message class....... "ABADR"
    Number.............. 599
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
Trigger Location of Runtime Error
    Program                                 SAPLABADR
    Include                                 LABADRF01
    Row                                     255
    Module type                             (FORM)
    Module Name                             WORK_AREA PUT
225       EXPORTING
226         i_write_to_tabadrx = 'X'
227         i_list_access      = buttons-list_access.
228   ENDIF.
229 * test mode: spool trace results
230   IF NOT debug-print_trace IS INITIAL.
231     CALL FUNCTION 'ABADR_TRACE_WRITE'
232       EXPORTING
233         i_write_to_spool = 'X'
234         i_list_access    = buttons-list_access.
235   ENDIF.
236 ENDFORM.                    "trace--show
237
238 ----
239 *       FORM WORK_AREA_DIR--ADD                                       *
240 ----
241 *       ........                                                      *
242 ----
243 * --- I_IDENTIFIER                                                  *
244 ----
245 FORM work_area--put USING i_identifier TYPE t_identifier
246                           i_work_area TYPE any.
247   DATA: name TYPE t_name.
248   FIELD-SYMBOLS: <l_work_area> TYPE ANY.
249
250   CHECK NOT i_identifier IS INITIAL.
251 * put item to work area
252   READ TABLE <strategy>-tab_func_parameters INTO name
253                          WITH KEY identifier = i_identifier.
254   IF sy-subrc <> 0.
>>>     MESSAGE x599(abadr).256   ENDIF.
257   PERFORM namework_areaassign USING name.
258 * unicode
..........................contd...
Pls help.

Hi Victor,
this is due to the Config issues, just check the config related to the "Settings for Availability Control Ledger" in the Grantee Managment

Posting period 011 2013 is not open while posting the document using F-02 getting the error

Hi SAP Captains,
Pls help me here.
While posting the document using T-code F-02 getting the error "Posting period 011 2013 is not open.
Please help me how to do, can you provide step by step.
Rgds..Suresh

Hi Suresh,
You can search google and will get number of posts on this. This will lead to duplication of similar posts on forum.
The message says "FI posting period is closed for 11th period of 2013". In which period you are trying to post the transaction?
If it is past, open the FI posting periods in OB52.
BR, Srinivas Salpala

ERROR WHILE POSTING THE STOCK OF MATERIAL

Dear experts
while posting the stock of material iam getting the error 'number ranges for transevent type WA in year 2011 does not exist.
what transaction should be used .
Thanks & Regards.
Erfan.

Dear,
First of all please go to T-code FBKP, click on Document Type, double click on document Type "WA" and check what is the value in Number Range.
For Example there it is 01, then got to FBN1, enter company code and give give 01 and against this maintain number.
Hope this helps!!!
Br,Vivek

While posting the Asset in f-90 the serives tax is not calculting

hi experts,
While posting the Asset in f-90 the serives tax is not calculating,even i entered in bussiness place?
thanks in advance
satya

hi expert
i didnot get the field to enter the tax code while postring the f-90 even i went through the related g/l account and tax code assigned in master data,i went through the field status varient and posting key.
but i am unable to get serives tax field,i am entering the business place field also.
thanks in advance
satya

Error while posting the payroll results to accounts

Dear all,
Im facing a issue while posting the payroll results to the accounts in T.code PC00_M99_CIPE,
The error log says...
Inconsistence in payroll results (tables V0/RT)
Diagnosis:
An inconsistency results has been found during the evaluation of the payroll results. No referenced entry has been found in table V0.
Can anybody suggest me wat i hav to do...
Thanks & regards
Gopinath.Balakrishnan

Hi
Check whether the user is having the authorisation for the t.code PC_PAYRESULT or PC00_M40-PAYRESULT.
Because some times HR user will run the payroll and FI user will do the postings. If FI user is doing the postings, in general he will not have the authorisation for HR T.codes, then system will give such kind of errors.
If not check the paryoll results and control record.
Thanks & Regards
Bharathi

Error messege BP603 while posting the parked document budget exceeded

Hi ,
We are having the budget function and its for overall release.
Budget has been relased and assigned value is less then the released budget in all conditions.
Its throwing the error messege No BP603 while posting the parked documents. Unable to understand the reason why its behaving.
Please let me know if anybody has faced such problem.
We are into ECC6, EHP 4 and the SAP note 557431 is not going to help anyways.
Regards
N.Raju

Hi,
Please follow as given below:
1. Use T.Code KO31 and enter order and deactivate the control
2. Then try to post the parked document
3. And use T.Code KO30 and enter the order to activate the control
Some times system will check budget availability which already commited for parked documents.
Hope it will work.
Chandu

Error occured while posting the job schedule for JDBCAdapter

Hi Experts,
In Application Log in Path: "/usr/sap/<SID>/DVExxxx/j2ee/cluster/server1/log", I see the error:
#/Applications/ExchangeInfrastructure/AdapterFramework/Services/Util
##com.sap.aii.af.service.scheduler.SchedulerManagerImpl.postJobScheduleOthers(String, int)
#J2EE_GUEST#0##n/a##f7956e1f6b4711e0b851001e0b5d3ac8#SAPEngine_Application_Thread[impl:3]_23##0#0
#Error#1#com.sap.aii.af.service.scheduler.SchedulerManagerImpl#Plain
###error occured while posting the job schedule for JDBCAdapter_9f0584b1bcb33b94b67ada456233bcb8 with 2#
Frequently are created Lock's and I need remove them in Visual Admin.
Any idea about this error?
Tks in advance.

Hi,
After applying the SP 23 Patch Level 08, LOCK JDBC problems stopped.
But now when a network error or database error, the JDBC Sender Communication channels that were open to connection, are blocked.
Even following the instructions in [SAP Note 1083488 - XI FTP_JDBC sender channel stop polling indefinitely (04_04S)|https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1083488] the problem continues.
I've already set the parameter "taskTimeout" and selected the option "Disconnect from Database After Each Message Processing" but not resolved.
Any ideas?
Thanks in advance.

Dump observed while posting the Idoc to the application server

Similar Messages

Maybe you are looking for