Dump on table space

HI,
We are executing the TCode : FV65 and getting the dump as follows.
=====
ShrtText
No storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was not available.
Error analysis
The internal table "IT_5402" could not be enlarged further. To allow error handling, the table had to be deleted before this log was created. So, if you branch to the ABAP debugger from the display of this log, the table will there be displayed with 0 rows.
Information on where terminated
    The termination occurred in the ABAP program "SAPLSDH4" in "TO_SORT_TAB". The main program was "SAPMF05A ".
The termination occurred in line 746 of the source code of the (Include) program "LSDH4F09" of the source code of program "LSDH4F09" (when calling the editor 7460).
======
I beleive, its a standard program but I am not getting a clue how to get out of it.
Please advise.
regards,
sachin

Hi Sachin,
Then you should not face this issue. Just check with your basis if there is sufficient table space available on the server.
If now only you are facing this problem then there must be some issue with the table space available.
Regards,
Atish

Similar Messages

Query Dump for table space troubles

Hi all,
I have to solve a dump on a query executed within a large ammount of data.
Error Message: No storage space available for extending the internal tab.
A dump occurred during the execution of a query dealing with the lack of space in the internal tab.the profile parameters are correct and we also have unsuccessfully applied the Note 903258.
The termination occurred in the ABAP program "SAPLRSDRC" in "APPEND_DATA".
The main program was "SAPMSSY1 ".
does anyone know how can I procede?
many thanks
regards
Filippo Corvi

Hi Roberto
we are having memory dumps TSV_TNEW_PAGE_ALLOC_FAILED for queries.
I checked in trx.ST22 and I forwarded those parameters to the Sys. administrator:
"[...]If the error persists, ask your system administrator to check the
following profile parameters:
o ztta/roll_area            (1.000.000 - 15.000.000)
       Classic roll area per user and internal mode
       usual amount of roll area per user and internal mode
o ztta/roll_extension       (10.000.000 - 500.000.000)
       Amount of memory per user in extended memory (EM)
o abap/heap_area_total      (100.000.000 - 1.500.000.000)
       Amount of memory (malloc) for all users of an application
       server. If several background processes are running on
       one server, temporary bottlenecks may occur.
       Of course, the amount of memory (in bytes) must also be
       available on the machine (main memory or file system swap).
       Caution:
       The operating system must be set up so that there is also
       enough memory for each process. Usually, the maximum address
       space is too small.
       Ask your hardware manufacturer or your competence center
       about this.
       In this case, consult your hardware vendor
abap/heap_area_dia:        (10.000.000 - 1.000.000.000)
       Restriction of memory allocated to the heap with malloc
       for each dialog process.
Parameters for background processes:
abap/heap_area_nondia:        (10.000.000 - 1.000.000.000)
       Restriction of memory allocated to the heap with malloc
       for each background process.
Other memory-relevant parameters are:
em/initial_size_MB:         (35-1200)
       Extended memory area from which all users of an
       application server can satisfy their memory requirement.

Dropping Rollback table space in export dump and use the undo table space

Hi,
I want to upgrade my DB which is on 9.2.0.1.0 to 10.2.0.1.
I have done an export.
In order to import the DB I have created all the table spaces identical that of my export copy. While creating the Blank database I have already created Undo table space. In the exported DB I have a table space called rollback, how can I drop this table space and use undo table space. I believe this is the recommended table space that should be used in new releases
Thank you

Very briefly, these are the steps you will need to perform:
1) Create an UNDO tablespace the same size as the Rollback tablespace, e.g.:
CREATE UNDO TABLESPACE undo
DATAFILE ‘/ora/$ORACLE_SID/001/oradata/$ORACLE_SID/undo_01.dbf’ size 1000M;
2) Add the initialisation parameters UNDO_MANAGEMENT=AUTO, UNDO_TABLESPACE=UNDO. Omit the UNDO_RETENTION parameter unless it is to be set to a value other then the default of 900 (seconds)
3) Remove the initialisation parameter ROLLBACK_SEGMENTS
4) Bounce the database to bring the new parameters into effect.
5) Drop the Rollback tablespace including contents and datafiles
Cheers,
Jason

How do i increase the table space in BI...

How do i increase the table space in BI. Its giving me short dumps when i am logging into the system. So, i need to increase the Table space. Can you all please tell me the steps for increasing it.
Thank You.

hi irfan,
I too faced the similar problem error showing was table space problem its some database issue sue to this issue i was not able to run any loads or do any operations on by BI side then my on site team contacted the oracle guys to solve this.......
ravi

Table space not getting cleaned after using free method (permanent delete)

Hi ,
We are using the free method of the LIB OBJ, to permanently delete the objects. As per documentation, the ContentGarbageCollectionAgent will be cleaning the database which runs in a scheduled mode. But the log of that ContentGargabageCollectionAsgent shows, all zero for objects without reference, objects cleared,etc. I.e the table space remains the same before and after deleteing all the contents in the cmsdk database. But the agent is running as per the schedule but just comes out doing nothing.
Can anbody put some light on this issue.
thanks
Raj.

Hi Matt,
Thanks for replying. It's been a very long time waiting for you ;)
---"Are you running the 9.2.0.1, 9.2.0.2, or 9.2.0.3 version of the Database?"
we are using 9.2.0.1
---"If you installed the CM SDK schema in the "users" tablespace ......."
Yes we are using USERS tablespace for our Development.
I ran the query. The result is:
SYSTEM MANUAL NOT AFFECTED
USERS MANUAL NOT AFFECTED
CTXSYS_DATA MANUAL NOT AFFECTED
CMSDK1_DATA MANUAL NOT AFFECTED
(USERS belongs to develpoment cmsdk schema. And CMSDK1 for Prod CMSDK schema)
From the results I see only "Manual", but still I don't see the tablespace size being coming down. Both table space sizes (USER and CMSDK1) always grows higher and higher.
Also to let you know, We use ORACLE EM Console (Standalone) application to see the oracle databse information online. Will there be any thing to do with the tool we use to see the table space sizes. We make sure we always refresh it before making a note.
So is there anything else I can see. Once I saw the ContentGarbageCollection agent to free 1025 objects and deleted 0 objects. But I don't see any change in the table space size. I am little confused b/w freed and deleted.
thanks once again for your response Matt.
-Raj.

What is difference between table space and shchema

what is difference between table space and shchema ?

784633 wrote:
so each user has it own space of tables - schema ?yes, but let's clarify a bit ....
The "schema" is the collection of all objects owned by a particular user. So if user SCOTT creates two tables, EMP and DEPT, and a view EMP_RPT, and a procedure GET_MY_EMP, those objects (tables, views, procedures) collectively make up the SCOTT schema.
Those objects will be physically stored in a tablespace.
A tablespace is a named collection of data files. So tablespace USERS will be made up of one or more data files. A specific datafile can belong to one and only one tablespace. If a tablespace has more than one data file, oracle will manage those files as a collection invisible to the application - much like the OS or disk subsystem handles striping across multiple physical disks.
A specific object in the SCOTT schema can exist in only one tablespace, but not all objects of the schema have to be in the same tablespace. Likewise a tablespace can contain objects from multiple schemas.
and can one user to access tables of other users?As others have said - FRED can access tables belonging to SCOTT as long has SCOTT has granted that access to FRED.

Space in bytes used by a single index in given table space

Hi All,
How can i find a table space used by index in bytes
Eg:
suppose i have a table space USERS and i have a table say customer . one index defined on table customer called CUSTOMER_UQ and mapped to table to table space USERS . How can i find the bytes used by object CUSTOMER_UQ in table space USERS.
Thanks

The used space in Karthik's example is the number of bytes actually used by entries in the index, not the amount of space allocated to the index itself.
To find out how much space in disk is allocated to the index you can use (as the owner of the index) something like:
SELECT bytes FROM user_segments
WHERE segment_name = <index name>You could also use all_segments or dba_segments if you have access as another user, but you would also need to specify the owner name.
John

BRtools table space creation error

hi,
Iam trying to create new table space in my R/3 system. When i went to brtools - space management sytem throwing error owner failed.I tried with all users to login like ( <SID>adm,administrator etc ...)even then same problem.Could you please suggest how to create table space with what login id
Error:
Main options for creation of tablespace in database WA6
1 - Tablespace name (tablespace) ......... [PSAPECDATA]
2 - Tablespace contents (contents) ....... [data]
3 - Segment space management (space) ..... [auto]
4 - SAP owner of tablespace (owner) ...... [EC5ADM]
5 - Data type in tablespace (data) ....... [both]
6 # Joined index/table tablespace (join) . []
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
c
BR0280I BRSPACE time stamp: 2006-06-14 21.08.45
BR0663I Your choice: 'c'
BR0259I Program execution will be continued...
BR0824E Owner EC5ADM not found in database or not SAP owner
BR0691E Checking input value for 'owner' failed
BR0669I Cannot continue due to previous warnings or errors - you can go back to
repeat the last action
BR0280I BRSPACE time stamp: 2006-06-14 21.08.45
BR0671I Enter 'b[ack]' to go back, 's[top]' to abort:
Please suggest.
- Cheers

Login as ora<sid> and run brtools. Tablespace owner will be SAP<SID> or SAPR3 depends upon your version.
Thanks
Prince

Table space not reduce after delete in oracle 11G

Hi Team,
I have a DB 11.1.0.7 on unix.
I have execute delete tables on tablespace, but this not reduce.
Thanks

935299 wrote:
What segment space management type is defined for the tablespace in question?
MANUAL
Then you should check out the documentation some more.
But even if you shrink the table segement what is that going to do for the data file size?
I don't undertand you.
ThanksYour thread is titled "Table space not reduce after delete in oracle 11G" which implies to me that you are interested in reducing the size of a tablespace (which really means reducing the size of the underlying datafile(s)).
So, if you shrink the size of the sys.aud$ table, will that cause the datafile(s) to become smaller? Will it accomplish your goal? What else, if anything, needs to happen?

Table space not reduce after delete in oracle 10g

Hi..
Based on my system, i have found that my oracle table space did not reduce after the deletion query. Why ?.. Could somebody help me. As your info, I am using oracle 10g.
Thank you,
Baharin

After Delete the table space will not be set free. high water mark will not be reset. to regain the space you need to recognize the objects from which you deleted the data. This can be done in many ways.
1) Move the objects.
Alter table temp move --> optionally tablespace clause can be used. After this you need to rebuild table indexes.
2) With 10g table can be shrinked or reorganize to free the space.
alter table mytable enable row movement;
alter table mytable shrink space;
3) Export/Import
export the objects and drop and recreate with import.

How to restart after table space error

Hi,
While loading a big file ( 360 MB) with the File -> XI-<ABAP prodxy from source, we got the table space error in middle of load. Due to Content conversion split for 20K we normally get many messages per load.
In this case after basis increased the disk space, how do i restart the process so that it start from where it is left. I checked Moni and there is no Que. I checked RWB for adapter also and there is no message with error. I also checked integration and all possible places..
The Alert that came in for failure has a message ID. I checked and found that message ID has been processed successfully. Still the count of records at the source does not match with target and lot of records are missing.
Is there any way to re run the process from where it was left.
Thanks

Hi,
Check following:
- RWB->Message monitoring->Adapter engine (not integration server)
-Check for follwing status:
"Holding", "Waiting" "To be delivering" "Error" your message should be here any of above status.
Note: in RWB message monitoring select "Adapter engine"
Regards,
Gourav
reward points if it helps you

Temp Tables space problem with ORA-01114 and ORA-27072:

RDBMS :Oracle:9.2.0
OS: Linux AS3
Storage: SAND arrray (RAID 5)
Problem on exeuting dml statement
SQL> select * from myview ;
select * from myview
ERROR at line 1:
ORA-01114: IO error writing block to file 201 (block # 3977)
ORA-27072: skgfdisp: I/O error
Linux Error: 28: No space left on device
Additional information: 3976
ORA-01114: IO error writing block to file 201 (block # 3977)
ORA-27072: skgfdisp: I/O error
Linux Error: 28: No space left on device
Additional information: 3976
With Regards
Joy

Hello joy,
So, still looking for solution. I suggest you a sloution and it works well only if as you mentioned (in your previous post) that file causing error is temp file. So, get rid of this better you create new temporary table space and drop old one and then delete the old files manually.
But this will work only for Temp Tablespace not for normal tablespaces and datafiles. Prepare new temporary tablespace at different location from the previous one, try to make it on different disk beacuse it may be due to corruption of physical medium too.
Try this. If it works... you are through... otherwise i have no other options...
Please update.....

Information about table spaces.

Hi!
I have a requirement to create a Bex by which I can display the list of table spaces available and status of those table spaces like memory free, Used. Though we can get this information from DB02 I need to generate a report and broadcast that to users.
Can anyone help me in telling me the table name where you can get the list of table spaces and infomation or any function module which lists the table spaces name and status of them.
Regards
Venkat

Hello,
Could you please share more information about this? We need to do the same thing. How did you create your generic datasource? what table/Function module did you used?
Thank you
Ramona

Table space and recollection of released space after client deletion

Dear All,
I have two questions:
1.Can any1 tell me how to determine the fastest growing table and how to reorganize table space.
2. Is there any way by which we can recollect the space released:say after client deletion. I had deleted one client two weeks back and when I saw the SAP/user drive I fow free space available remains the same.
I searched but found no relevant clue.
regards,
Ashutosh

1.- You can see the largest table report in ST04 (as far as i remember)...
2.- You can reorganize your db using brtools - brspace...
Read,
http://help.sap.com/saphelp_erp2004/helpdata/en/32/0d0c888839164ba4245b3ff7969c59/frameset.htm
Regards
Juan

Table space need to be increased in every week..

Dear Experts,
We are facing a new problem .
The problem is like , Last 6 months back we had done the Hard-ware migration. After
migration we need to increase the table space in every 10 days. But before migration , the table
space was getting ing increased in every 45 days.
In this way , we dont have much space left with us..
I am not able to analyse the issue ...
Please suggest .. What to check and necessary action ...
Thanks,
Sanjana

Hi,
Thank you for the response. Yes , the hord-ware migration is not linked with this issue. But this is happening after migration . So I was thinking , if any setting might have changed or something like that .
Deleting all the redundant data in system means , it should run regaularly. And Now new developments have gone to production.
And the data loads are carrying almost same amount of data. Only 2 changes, Material Master was coming on DELTA , Now its Coming on FULL Load. Rest all loads are same as before migration.
Kindly suggest.
Thanks,
Sanjana

Dump on table space

Similar Messages

Maybe you are looking for