DUMP TSV_NEW_PAGE_ALLOC_FAILED
Hello Everybody,
We are getting the dump DUMP_TSV_NEW_PAGE_ALLOC_FAILED in our SAP R/3 4.6C application 32 bits
No storage space available for extending table "IT_16".
What happened?
You attempted to extend an internal table, but the required space was
not available.
Anybody now the solution to this dump?
Should we increase the memory in our Windows operational system?
Best Regards,
Fábio Karnik
Edited by: Fio Tchobnian on Aug 20, 2009 3:18 PM
> We are getting the dump DUMP_TSV_NEW_PAGE_ALLOC_FAILED in our SAP R/3 4.6C application 32 bits
> Anybody now the solution to this dump?
>
> Should we increase the memory in our Windows operational system?
There is no general solution.
That dumps means, that you have reached the maximum amount of RAM imposed by the operating system. By default a 32bit application can only allocate 2 GB of memory in total.
You have various options - like enable /3GB option in your boot.ini or trying to reduce the amount of memory needed for the program. However, the long term solution would be to migrate to 64bit (and to upgrade 4.6c).
Markus
Similar Messages
-
RSSM_TRANSFER_FILE_TO_APPSERV requriement
Dear All,
I am using a program RSSM_TRANSFER_FILE_TO_APPSERV to move the file from pc to application server. When this program tries to move a big file then it fails and gives a dump ""TSV_NEW_PAGE_ALLOC_FAILED". This is is coming may be because internable table not able to handle more than 1 GB limit.
Requirement is to send the bigger file to app servre using the same program. Is it possible to do like read the file in chunks and after placing on the app server the internal table contents should get cleared and this is repeated till the whole file is read.
or if it can be done in any other way?
Any inputs on this? Please share.
Thank you!you must have an older system....current version of this program utilizes (as it should) GUI_UPLOAD. CG3* transactions and WS_* functions are seriously out of date.
Why do you get a conversion error? Do you have an ASCII or Binary file and do you have the path/filename exactly correct? It could be that you're hitting limitations due to file size capability in the gui. There are many ways to move a file to an APPS server....check with your Basis guys...it may be much more beneficial to use some other tool, like FTP, to copy a file from desktop source to apps server target.
Edited by: BreakPoint on Nov 9, 2011 7:39 PM -
TSV_TNEW_PAGE_ALLOC_FAILED Dump in CRM
Hi Experts,
While accessing the custom componenet in CRM system we are getting the dump TSV_TNEW_PAGE_ALLOC_FAILED saying No more storage space available for extending an internal table. And we are not getting this dump every time we access this componenet. We get it on a particular time. And when we checked the shared memory in SHMA during that time, Free memeory is very less. Automatically after sometime the free memory gets increased. Then the dump does not occur. What could be the reason. Do we need to change any memory parameter. Kindly clarify.
Thanks & Regards,
Sundara.The error TSV_NEW_PAGE_ALLOC_FAILED means that more memory was requested
because the program needed to expand an internal table, but none is available.
When Extended Memory is used up, the process will go into PRIV mode as it starts using Heap Memory (or vise-versa). No other user will be able to use this wp while it is in PRIV mode. If there is enough heap for it to finish, you will not see the error
TSV_NEW_PAGE_ALLOC_FAILED and the wp will be freed.
Are you using a 64-bit or a 32-bit system if it is a 64 bit system then refer to note 146289. This note shows how to Implement the SAP profile parameters.
See SAP Note 425207 for parameter limitations
Setting of em/initial_size_MB usually depends on the physical RAM on the server and if you have any other instances on that same server. According to note #146289 this can be increased to very high
values if there is sufficent RAM on the box.
Also please review the following notes:
20527 Runtime error TSV_TNEW_PAGE_ALLOC_FAILED
217262 Runtime error text for TSV_TNEW_PAGE_ALLOC_FAILED
185185 Application: Analysis of memory bottlenecks
417307 Extractor package size: Collective note for applica
Regards,
Gervase -
Short DUMP: EXSORT_NOT_ENOUGH_MEMORY
Hello everyone,
Our user is running some reports using Transaction IQ09-
Display Material Serial Number List, and its going to the dump
by giving error message as "STORAGE_PARAMETERS_WRONG_SET"
or "TSV_TNEW_PAGE_ALLOC_FAILED" or EXSORT_NOT_ENOUGH_MEMORY.
We have tried to execute this transaction in background mode
and still getting the same dump/error message. We are getting
this error in our Production R/3 system (PU1) and it is
affecting business operations.
"In the what you can do" section in DUMP log, this is what I find:
Set the system profile parameters
- abap/heap_area_dia
- abap/heap_area_nondia
to a maximum of 687977744. Then reduce the value by 10.000.000 to be on the
safe side.
Then restart the SAP System.
Our system is 32-bit SAP kernel and what these DUMPs means is additional memory is required to extend the internal table, but none is available. This error is usually due to a lack of system resources for the roll area where internal tables are processed.
Below are the profile parameters we have set in our PRD system.
ztta/roll_first 1024
ztta/roll_area 2000896
abap/heap_area_dia 2000683008
abap/heap_area_nondia 2000683008
abap/heap_area_total 2000683008
abap/heaplimit 40894464
abap/swap_reserve 20971520
ztta/roll_extension 2000683008
em/initial_size_MB 5765
em/blocksize_KB 1024
Do I need to change any of the above profile parameters in RZ10 to get rid of the dump? Do you think this will have any adverse effect on our production system such are system may run out of shared memory.
Any help will be greately appreciated and points will be rewarded.
Thanks,
Shahid AnjumHi Shahid,
To understand how the system performs sorting and the EXSORT_NOT_ENOUGH_MEMORY error, see SAP Note 193529 Sort as of 4.5A/EXSORT_NOT_ENOUGH_MEMORY.
The error TSV_NEW_PAGE_ALLOC_FAILED means that more memory was requested because the program needed to expand an internal table, but the memory was not available.
When Extended Memory is used up, the process will go into PRIV mode as it starts using Heap Memory (or vise-versa). No other user will be able to use this wp while it is in PRIV mode. If there is enough heap for it to finish, you will not see the error TSV_NEW_PAGE_ALLOC_FAILED and the wp will be freed.
You should check your settings for the profile parameters abap/heap_area_total and abap/heap_area_nondia against the Notes:
146289 Parameter Recommendations for 64-Bit SAP Kernel
425207 SAP memory management, current parameter ranges
Also, see the Notes:
20527 Runtime error TSV_TNEW_PAGE_ALLOC_FAILED
217262 Runtime error text for TSV_TNEW_PAGE_ALLOC_FAILED
185185 Application: Analysis of memory bottlenecks
649327 Analysis of memory consumption
However, often the problem may not be with memory settings, but with the selection values the user is entering for the report. That is, they may be entering a very wide range against a very large table. In these cases, check the selection values and reduce them. Also, check the affected table size and consider if parts of it may be archived.
Best Regards,
Matt -
TSV_TNEW_PAGE_ALLOC_FAILED Short Dump
Hi
I am scheduling a Setup tables job in background to fill setup table but i am getting a short dump with TSV_TNEW_PAGE_ALLOC_FAILED error
any ideas on how can i fix it
Thanks in advanceThe error TSV_NEW_PAGE_ALLOC_FAILED means that more memory was requested by the system because the program needed to expand an internal table, but not is available. When Extended Memory is completely used up, the process will go into PRIV mode and it will start using Heap Memory in case of Windows or vice versa in case of Unix. Once this enters into PRIV mode, no other user will be able to use the corresponding work process. If there is enough memory for it to finish, You will not see the error.
Note: Internal table can store max of 2GB data.
Please refer the following SAP notes:
SAP Note 649327 Analysis of memory consumption.
SAP Note 20527 Runtime error TSV_TNEW_PAGE_ALLOC_FAILED
SAP Note 185185 Application: Analysis of memory bottlenecks
SAP Note 369726 TSV_TNEW_PAGE_ALLOC_FAILED
What can you do?
1) Process smaller chunks of data. (E.g. not all 50.000 records at once) is one option.
2) Create a memory snapshot right before the program dumps and analyze where the memory is consumed in order to understand if or where you can reduce memory consumption. -
Dump TSV_TNEW_PAGE_ALLOC_FAILED with memory empty
Hi!
I'm with problem. My Z prog was giving dump TSV_TNEW_PAGE_ALLOC_FAILED but memory is empty.
I'm trying append from internal table A to internal table B. I just has 1000.000 of records. Another internal table and structures used in program are clear.
Why it's occur? And how can i solved it?Hi friend!
Did you look this blog?
/people/rajeev.p/blog/2010/07/31/top-10-abap-dumps
"2) TSV_TNEW_PAGE_ALLOC_FAILED
The error TSV_NEW_PAGE_ALLOC_FAILED means that more memory was requested by the system because the program needed to expand an internal table, but not is available. When Extended Memory is completely used up, the process will go into PRIV mode and it will starts using Heap Memory in case of Windows or vice versa in case of Unix. Once this enters into PRIV mode, no other user will be able to use the corresponding work process. If there is enough memory for it to finish, you will not see the error.
Please refer the following SAP notes:
SAP Note 649327 - Analysis of memory consumption.
SAP Note 20527 - Runtime error TSV_TNEW_PAGE_ALLOC_FAILED
SAP Note 185185 - Application: Analysis of memory bottlenecks
SAP Note 369726 - TSV_TNEW_PAGE_ALLOC_FAILED "
Maybe basis team have to expand memory config for internal tables.
Best regards!
Rodrigo Paisante -
Dump: No more space in Rollarea
Hi all,
i got a shortdump while appending records to an internal table (TSV_NEW_PAGE_ALLOC_FAILED).
The strange thing, which i dont´t understand is that
im using the statements free, reject and clear after 10.000 records were added to the internal table but
the shortdump log shows that there are nevertheless more than 100.000 records in the table.
How can i free up the memory used by the internal table ??
Any ideas ?
regards
André
Message was edited by: Andre WerzIf the dump indicates that there are more than 100K records in the internal table, then the only possibility is that you have a bug in the logic / algorithm that clears out the internal table every 10K records.
If you have an internal table without a header line, then the statements FREE, REFRESH and CLEAR will all empty the internal table so that its row count is 0. The difference between CLEAR/REFRESH and FREE, is that only the FREE statement will release the memory previously allocated for those rows. The idea is that FREE is called when you know the internal table is not going to be re-populated, and CLEAR/REFRESH is used when the internal table needs to be emptied and then re-populated (avoiding the overhead of allocating memory again).
If the internal table has a header line, then "CLEAR TAB" will only initialise the header line, whereas "CLEAR TAB[]" will have the same effect as "REFRESH TAB". The REFRESH statement will not initialise a header line.
I assume you meant to type REFRESH rather than REJECT, as the REJECT keyword is for an entirely different purpose not related to internal tables.
Cheers,
Scott -
TSV_NEW_PAGE_alloc_failed in 'RM06BV47'
Hi experts ,
I am gettinga short dump on executing program 'RM06BV47'
The error message is : TSV_NEW_PAGE_alloc_failed
Please suggest any SAP note/ or a suitable solution for the same.
Thanks!
PalakHi,
This is memory allocation error.
please check the internal table size or give occurs 0.
or reuce the data by filtering in select statement.
else u r filling select options using loop
it exceeds 1500 records in select option table
same value u r trying to retrive to data from table using the select options.
please check else post u r dump and code where u r getting dump.
Regards,
Nandha -
Lock ups and dumping psyical memory!!!
Hi i have just installed a new pc most of the stuff im useing is from my old computer so i know they work fine im running a:
P4 3GHZ Prescot 800MHz, HT-Enabled
865PE Neo2-P
512 DDR-400 Twin moss
ATI Radeon 9000 pro
PSU-400
XP Pro
My computer locks up alot when running intense games (games have worked before no problem) i also get a error saying dumping pysical memory, i have looked about and tried to solve this myself, i found that someone was haveing the exact same problem as me and he fixed it by turning the FSB down as his memory wasnt compatable with his motherboard if doing that works how do i do it ?
Many thanks JonathanFlappa, Your memory " clock" is fine and there is no need to "underclock it" as long as you did not mess with the Bios.
I had the same problems. I could not even get thru a Clean install of windows as it would Blue Screen
1- are you running in " Dual Channel Mode"?
2- If so is your memory a " match Set"?
some times memory even thought it has the same markings is not matched . Dual channel sets are matched and made to run together in "Dual Channel Mode"{
( Even though I had the same manufacturer memory my set would not run in Dual Channel without " Blue Screening" I bought a Matched Set of Kingston Valueram and have not had a problem since
3- If it is not a matched set, pull one stick out and run it for a while , if it still bluescreens try the other stick
4- raise your memory voltage to 2.7 or 2.8 ( which ever is the lowest that it runs stable)
5- If all this does not work , run MEMTEST to see if there is a problem with both sticks
6- you are running a Bios Version that supports the " Prescott Microcode" right?
Let us know what your findings are
Good Luck
Dave -
Report J_1IEWT_CERT getting cancelled, generating ABAP dump!
A long running report J_1IEWT_CERT in background mode is getting cancelled after running for a while and generating the following dump :
Error analysis
When changing or deleting one or more lines of the internal table
"\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]" or when inserting in the table
"\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]", 0 was used as
the line index. An index less than or equal to zero is not
allowed.
The error can occur when using the following options:
1. "INDEX idx" for specifying the line number in the table
"\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]"
where you want to change, insert or delete.
2. "FROM idx" for specifying the start index when deleting a line
area from or inserting a line area into the table
"\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]".
3. "TO idx" for specifying the end index when deleting a line
area from or inserting a line area into the table
"\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]".
At the time of the termination, the table contained 17008 lines.
How to correct the error
If the error occurred in your own ABAP program or in an SAP
program you modified, try to remove the error.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TABLE_INVALID_INDEX" " "
"J_1IEWT_CERT" or "J_1IEWT_CERT_F01"
"FILTER_DATA"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
Tried searching for some SAP Notes to fix the issue, no success as of now, Please help me out...Have you checked these notes ?
363107 Short dump occurs during TDS certificate printing.
803806 Error while genrating TDS certificate 03.01.2005
1066049 J1INCERT - Error while generating TDS certificate
Regards,
Subhash -
Short dump 'Table does not exist in database'
Hello All,
When a report is executing it is going to short dump by saying 'Table does not exist in database'. As per the short dump analysis this issue is happening because of the following Native SQL statement statement :
Program : %_T050N0 (This is a dynamic program generating by SAP )
Form Name : DYN_LIC_SEL_TOT
exec sql performing LOOP_MOVE_WRITE_ISAP.
select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty into :dcat-lplate, :dcat-matnr,
:dcat-werks, :dcat-charg, :dcat-holdflag,
:dcat-qty from ZLICENSE_R2 where itm_num = :p_matnr and
model_lot = :p_charg
endexec.
As per the customer this issue occurring since they migrated the SAP back-end data base from Oralce to DB6. Here I felt that ZLICENSE_R2 is not migrated from the Oracle to DB6. But as per the BASIS Team, even this table was not maintained in Oracle also. If the table was not maintained in the Oracle, this issue should have been there even before migration also.
Following is the short dump details:
Short text
Table does not exist in database.
What happened?
The table or view name used does not
exist in the database.
The error occurred in the current database connection "DEFAULT".
What can you do?
Check the spelling of the table names in your report.
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_NATIVE_SQL_ERROR', was not
caught in
procedure "DYN_LIC_SEL_TOT" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Triggering SQL statement: "select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty from ZLICENSE_R2 where itm_num = ? and model_lot = ? "
Database error code: "-204"
Could you please let me know what might be the reason for this issue.
Many Thanks in Advance.Transaction SE11, input ZLICENSE_R2 for table name, and display the table. Did the table display? If not, that is the main problem.
If the table displays, go to menu item Utilities -> Database Object -> Database Utility
In the resulting screen, under the "Status" fields, you should see text "Exists in the database." If you don't, then the table exists in the dictionary, but doesn't exist in the database system. Click the "Create database table" button and then you should be able to run the program.
You may need basis team's help to carryout some of these actions. -
Short Dump while scrolling in a maintenance view
A maintenance view has one field, defined as "Radiobutton".
1) Select the radiobutton for one entry.
2) Scroll down so that in the new page (i.e. the entries displayed in the new page) the entry selected in the first step is not visible.
3) Select any radiobutton again corresponding to any of the entries displayed in the new page.
4) On scrolling up again the short dump occurs.
The short dump text says "More than one radio button is active".
Any inputs in this regards are appreciated.
Thanks.
Gajendra.Hi,
that means you are trying to make two radio buttons active.
parameters: ra radiobutton group g1 default = 'X',
rb radiobutton group g1.
ra = 'X'.
and rb = 'X'.
in your case so obviously it will dump.
check your coding..
and show your code...
Regards
vijay -
Is it possible to create manually a dump?
Dear all,
I have a question about Dumps created in SAP while programs run with unpredicted errors.
I have a specific table defined in the dictionary which has two coloumns progId and path.
The first one is a unique identifier given to a program and the second column is an absolute path on the
unix server where SAP is installed.
For example
MyProg | /usr/tmpbatch/data/E200
Means that the ABAP program named 'MyProg' will run and its output file (the output of the program) and the
log file are created in /usr/tmpbatch/data/E200.
In each of my programs, first of all I check the content of this table in order to ensure that the path is defined for the
given program (and therefore I may be able to create avec success both output and log files). If there is no entry
in the table for the given program, I leave the program by calling the STOP instruction.
My programs run at night, so the next day the corresponding users read the content of the generated output/log files.
As a result, if the path is not defined properly for a given program in the table, the program is not run and therefore
there will be no output/logfile the next day.
My question is How can I inform the user who arrives the next day observing that one program has not been run? How
can I tell him by some kind of system message that the program exited because the path for the files had not been defined in
my table?
Each morning, we can analyse the dumps which were produced during the precedent day. So that we may know
(approximately) what went wrong. But as far as I know, dumps are generated automatically by the system. Is it possible
to generate a dump (by calling some fucntion) with an appropriate error message for my problem?
Thanks in advance,
DariyooshHello again,
First of all I would like to thank everybody for their attention to my problem and
for spending time for answering my question. Thank you all very much.
Currently, Thomas' solution about MESSAGE_TYPE_X seems to work pretty well
for my problem. As all of you mentioned that, there should be softer methods to inform
users. One main problem is that the program which lanuches my programs during night
is not a sap user, it is a Unix scheduler (please forgive me I don't know these administration
details and how they work) so according to what the administrator told me it is not possible
to send email. As a result, I think I may go with MESSAGE_TYPE_X until I found another proper way.
Once again, thank you all for your help.
Kind Regards,
Dariyoosh -
Error while importing a dump file in Oracle 10g R1
Hi all,
While trying to import a schema using Data Dump, I am facing the following issue -
UDI-00018 - Import utility version can not be more recent than the Data Dump server.
Following is the version information of the source and target DB and the utilities :
Source DB server : 10.1.0.2.0
Export utility : 10.1.0.2.0
Import utility : 10.1.0.2.0
Target DB server : 10.1.0.2.0
Export utility : 10.2.0.1.0
Import utility : 10.2.0.1.0
I can figure out the cause for the problem, but don't know how to resolve it.
Any help will be appreciated.
Thanks in advance.
Gitika KhuranaHow did you get thre DMP file created and how are you trying to import the dump file? Could you post the commands you're using, please?
-
Error_Exception dump while opening the report in RRMX
Hi All,
When User trying to open the report Error_Exception dump is coming for few Info Providers. Please find attached dump for your reference.Issue is res loved, We have analyze the short dump ,when loads were running and at that if time user executed the queries then that dump was occuring.
Maybe you are looking for
-
Unzip downloaded patch on HP Unix
I have downloaded patch 9.2.0.5 from metalink. The downloaded filename is in the format of <filename>.zip. According to the instructions I should gunzip the file and then run the cpio command. In the instructions the gunzip utility should be run on a
-
Master Data in MM? Is conditions also a Master Data pl explain
Hello Folks, Could you pl tell me if conditions also cnsidered as a Master Data? Please explain the reasons for your answer. Also can anyone tell me why Quota Arrangement is number in the priority of Source determination? I know it is but I need to
-
HT5312 I forget my security questions and I'm trying to buy a book on iBooks
I forget my iBooks security questions answers! Help!
-
dear, ive recently reseted my nokia 5800 and deleted everything..including my email applic.tion-not the one found under mesage settinp but found on application. How can i download it as all that ive downloaded deducts my data bundle bt when i open th
-
SAP_COLLECTOR_FOR_PERFMONITOR Not Running
Hi , In my PI 7`0 system , SAP_COLLECTOR_FOR_PERFMONITOR this background job get canceled . it running hourly based .But it get canceled every day 7.20 AM And 20.20PM. other hours run success and finished. can any one help me regarding this Thanks i