Value for a characteristic changed with an other value in Query Design

I want to change the value for a characteristic (Type) in Query Design (not the description, the value).
In my cube I have these values:
Customer *** Type
22222********SmallCorp
22223********SmallCorp
22224********MedCorp
The report should like:
Customer *** Type
22222********LEGALENTITIES
22223********LEGALENTITIES
22224********LEGALENTITIES
Or only the "SmallCorp" value should be changed in LEGALENTITIES.
How to do that?
Thanks,
Dragos

You can write an exit to replace Type SmallCorp to LEGALENTITIES.
But this will reflect in other queries too....
Or If change in modelling is still an option, you can add one more Type 2 in the cube and update in the transformation with Constant = LEGALENTITIES. Use the Type 2 in the queries.

Similar Messages

HT2477 Are documentS created with Microsoft office for windows and Microsoft office for mac are compatible with each other

Are documents created with Microsoft office for windows and Microsoft office for mac are compatible with each other?

As with a lot of software, it depends on the version of Word, and what features the author used.
Technically, Office 2010 for Windows and 2011 for Mac are supposed to be feature compatible. As are Office 2007 for Windows, and 2008 for Mac.
However, if a person using Office 2010 / 2011 used a feature that only exists in that version and sends the file to someone using Office 2007 / 2008, they would very likely have trouble opening the file, or having it display as intended.

Dump when trying to display characteristic values in QUERY DESIGNER

Hi Experts,
Life seems to become a struggle with 7.0 for me :-(.
My current problem:
If I try to display characteristic values in Query Designer (left section of screnn, wthin dimensions) system dumps frequently.
It's that kind of dump, that doen't help really (to my oponion)_
What happened?
    The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
     along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_RSBOLAP_BICS_SERVICES======CP' has to be
    terminated.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
    "CL_RSBOLAP_BICS_SERVICES======CP" or "CL_RSBOLAP_BICS_SERVICES======CM003"
    "HANDLE_UNCAUGHT_EXCEPTION"
... etc.
BW 79, SP21
GUI 7100.4.14.3136
Any ideas?
Thanks in Advance and Regards
Joe

Hi Vikram,
Thanks for reply. Reinstalling GUI was successful, but - error still occurs. ..
Regards
Joe
Edited by: J.F.B. on May 28, 2010 3:02 PM

How do i expand a field in a line with 3 other fields when forms design will not allow

how do i expand a field in a line with 3 other fields when forms design will not allow it? I also want to shrink one of the fields and cannot do so.

It is possible that all there is not enough room on your line to grow the field. You can try a few things :
- Make the form width wider by dragging the right edge of the form or via the Form Setup dialog (File > Form Setup... and change the Form Width)
- You can make other field on the row narrower (if they are not already at their minimum width).
Each field type has a minimum width. What field type are you trying to make smaller?
For example : Text and Multiline can go down to a width of 30. Dropdown min width depends on the length of the long item in the dropdown list.
Hope this helps
Gen

Adding column values in query designer

Hi,
I have requirement to add value in query designer the values should look like this
Column A     Column B
10                    10
20                    30
30                    60
40                    100
the first values of column B will be same as Column A 10. The second value of column B = column A 1st value +Column A second value similarly Third value of column B = 1st + 2nd + 3rd values of column a. So on and so forth
Any help will be highly appriciated.
Regards,
ray

Hi
Just create the formula and go to the properties of that formula and go to the calculattion tab and in the "CALCULATE SINGLE VALUE AS " select the option the additive ( not sure but once check that will perform additive operation plz once check it) and select the cumulative check box.
I think u can get it , because in one of my project i did that calculation.
Hope u got it,
Thanx & Regards,
RaviChandra

All Dates displayed for "Characteristic Values" in Query Designer

Hello Experts,
We are on BI 7.0, level 13. I am having an issue within the Query Designer with regards to dates. I have a write-optimized DSO that contains 3 date fields (for example, ZDATE1, ZDATE2, and ZDATE3). Each date InfoObject is of type DATS so the system automatically creates it with reference to 0DATE.
When I create a query in the Query Designer, on the left hand side, I expand the "Characteristic Values" node under each date field. The Query Designer shows the same list of values for each of the 3 dates even though they are not valid values posted in the DSO for those fields.
For example, ZDATE1 only has 1 value posted in the DSO (01/01/2005).
ZDATE2 only has 1 value posted in the DSO (01/01/2006).
ZDATE3 only has 1 value posted in the DSO (01/01/2007).
Bute when I expand the "Characteristic Values" node in the Query Designer, I see ALL THREE values under each date field. I would expect to only see the 1 value posted for the InfoObject in the DSO. Also note that each InfoObject is defined to show "Only posted values in InfoProvider".
It appears that Query Designer will show all values for the reference InfoObject 0DATE instead of the ones posted to the actual InfoObject in the DSO. If I delete the data in the DSO, the Characteristic Values list still remains because they exist in 0DATE. Anyone encounter this before? How can I get the Characteristic Values list to only show posted values for that InfObject?
Thanks for your help!
J

Thanks for the response. I went into the DSO and right clicked on each of the Date fields. I looked at the Provider-specific properties and there is the option for "Query Exec.FilterVal" which only restricts what values appear when restricting during execution, not during query creation.
Is there someplace else I should look or someplace else I can make change to only display posted dates when creating a query? Thanks!

Hide a row or column for characteristic value # in Query Designer

Hi gurus,
I would if we could hide a result row / column if one of the characteristic value is #. The requirement is actually to remove the meaningless row / column from the whole result set. For example, I have a char Material Group in the column. Since not every Material is assigned to a Material Group, I will get the following layout:
Material_Group A
Material_Group B
Material_Group C
Is it possible to define in query designer so that the column with # will automatically not be displayed?
Thanks,
Meng

Hi Meng,
I guess we have the same users..
But there is one thing that is going to make a non sense on the report: if you do not display the "#" for material group, then the total of your query by material group will not be the summation of what is displayed on the screen...and if the user explort the information in Excel (pretty sure they will do so), you will have some calls that your query does not balance....
Based on that assumption, tell the users to assign a material group to the materials, so that this unassigned column disappears. You could even give them a control report listing all the parts that do not have a material group
If this is a standard business rule not to have a material group for all parts, then, what you could do is to change the text for empty rows for Material group, then the "#" will disappear and wil be under the text description you defined.
But keep in mind that your data is made of materials which do not have a material group in their definition, noraml or not ?
PY

Function module for FI document change with G/L line items

Hi!
Does anybody know how to change FI document with G/L line items (fields like XREF3, SGTXT, ZUONR - generally speaking, all the fields can be changed with FB02)?
FM FI_DOCUMENT_CHANGE has needed functionality and works well for account payables and account receivables line items, but it doesn't handle general ledger line items.
Regards,
Maxim.

Hello!
The function has some mandatory fields to use:
I_AWTYP -> get value from BKPF-AWTYP for the specific document;
I_AWREF -> number of the document to change;
I_AWORG-> concatenate document's company with respective year;
Then, only one of the following fields should be filled:
i_lifnr,
i_kunnr,
i_obzei,
i_buzei.
You can find the relevant data for this fields in BSEG.
The structure I_BSEGC should be filled with data you think appropriate. I didn't tested it, but i think the first fields are sufficient.
Then, add lines (1 for each field you wish to change) in table T_ACCCHG.
However, you should notice that you're not allowed to change all fields. For instance, KKBER is one of the fields that is forbidden to change in this FM.
Hope that helps.
Rui Delca Mendes

Fix for the Identity change with Siri

After trying all different ways to sync my phone and my wife's Iphone through the cloud sharing contacts and calenders, I think I have the fix for the identity change that Siri does. I turned off the contact sync on iCloud and it stopped swapping identities. I think that sharing contacts makes the iCloud think there is only one user. Downside of the cloud but not worth the hassle factor. I will sync contacts through iTunes.

gmiller0 wrote:
My mac has 10.7.3 and will not connect to wifi after it wakes up. Have contacted AppleCare but the problem cannot seem to be resolved.. I guess this is a major issue with Lion:(
What model of Mac? I have a MBP running 10.7.3 and do not have that issue. From the other couple of posts I've seen about it, it seems to be maybe an issue with some iMacs? Have your tried searching the Lion or iMac forums for similar issues, just to see if anyone has hit on why it is happening?

Did the markup for java applets change with version 4.0.5

Starting with Safari version 4.0.5 java applets are not rendering correctly. The Java coffee cup loading image pushes the actual content down. Was the applet tag markup changed with this release?
Take a look at the following example:
http://tinyurl.com/p27vpq
or
http://preview.tinyurl.com/p27vpq
FYI, 4.0.4 displays correctly.

Ok...
First, try a different user account with Safari and see if the same thing happens. If it does then it's a system wide issue, not just your user account.
From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
Go here for trouble shooting 3rd party plugins or input managers which might be causing the problem. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
Web pages now include a small icon or 'favicon' which is visible in the address bar and next to bookmarks. These icons take up disk space and slow Safari down. It is possible to erase the icons from your computer and start fresh. *To delete Safari's icon cache using the Finder, open your user folder, navigate to ~/Library/Safari/ and move this file "webpageIcons.db to the Trash.*
Relaunch Safari.
If you still have problems, go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop. Relaunch Safari. If it's a successful launch, then that .plist file needs to be moved to the Trash.

Value input for screen and to apply it to formula in Query Designer

Hi Gurus !
How could i input an value for screen in BEx and soon to apply it to formulas resident in cells in Query Designer, the result must be appear for each cell in the report.
Thank You for your helps.

create a variable with Manual/user input option.
use its value to populate the calculated field.

Filter certain InfoObject values in Query Designer

Hi
I've the following scenario:
- InfoObject 0ACCOUNT contains some account numbers with prefix 'XYZ' followed by a number, e.g. 'XYZ12345'
- These values may never be shown to the analysts, i.e. I need to filter (remove) them in the characteristic restrictions of the Query Designer
How can I do that? Hard-coding all these values makes no sense as new account numbers could be created anytime.
I think the only solution is using a customer exit or does someone have another idea?
Thank you for you help
Patrick

Hi Patrick,
Exclusion with multiple values generally hampers query performance, so better I would suggest you to include required values in filter if that is feasible (As I know there is some limit on number of filter value inclusion also).
You can simply create a customer exit variable on 0ACCOUNT, select all the master data values of 0account in internal table and then delete the values starting with 'XYZ'.
DELETE i_t_account where 0account CP 'XYZ'.
after that you need to populate all these values in variable. I would suggest you to do this operation in I_STEP = 2, otherwise if you do it in step 1 then it might take some time for user to see the selection screen.
Regards,
Durgesh.

Issue with calculating Top 20 % in Query Designer

Hai
I am working on Query designer 7.0 where I need to design a report which has 4 parts. The first 3 parts displays the Items with Top 20 Inventory Value with 3 respective divisions for 6 months . Now the 4th part is to display Top 20% of inventory Value.
So in this report I need to take the Total Inventory and calculate the Top20 % of the items. Hence in this report I need to refer to the top 20 value of 3 divisions. So I cant jus give one condition. So I tried the replacement path for Items with restriction to other queries and created the variables. But I cant use these varaibles in the structures of rows or columns. It gives an error that this variable cant be used in Structure.
Please do help me in refering the top 20 values of 3 divisions for 6 months and do a calculation to display the % in my 4th report.
I will assign points for any kind of help provided

If you can design all those in One query than you can have it...
It seems now your aim is just to take result for 3 queries and use it in 4th query...
But if you can figure out defining all 3 Divisions and restriction in Same Query and then put the DISPLAY OPTION = HIDE = do not display
and then use their result to display you will achieve what you want to....
for e.g.
Jan 07-----Feb 07 -
Mar 07 -
Dec 07
Division 1-- Item 1 -
Inv 1 -
Inv1.........................DO NOT DISPLAY
Item2 -
Inv2 -
Inv2..........................DO NOT DISPLAY
Item3 -
Inv3 -
Inv3..........................DO NOT DISPLAY
----
Item20 -
Inv20 -
Inv20........................DISPLAY ONLY
Division 2-- Item 1 -
Inv 1 -
Inv1......................DO NOT DISPLAY
Item2 -
Inv2 -
Inv2........................DO NOT DISPLAY
Item3 -
Inv3 -
Inv3........................DO NOT DISPLAY
----
Item20 -
Inv20 -
Inv20....................DISPLAY ONLY
Division 3-- Item 1 -
Inv 1 -
Inv1.......................DO NOT DISPLAY
Item2 -
Inv2 -
Inv2.......................DO NOT DISPLAY
Item3 -
Inv3 -
Inv3.......................DO NOT DISPLAY
----
Item20 -
Inv20 -
Inv20.........DISPLAY ONLY
THEN you will have result
Division -
Jan07 -
Feb 07 -
Marc 07
div1 -
Total inv/sum(top20) -
Total inv/sum(top20) -
Total inv/sum(top20)
div2 -
Total inv/sum(top20) -
Total inv/sum(top20) -
Total inv/sum(top20)
div3 -
Total inv/sum(top20) -
Total inv/sum(top20) -
Total inv/sum(top20)

Precalculated Value Set - Query Designer - information Broadcasting NW2004

Hi Buddies,
Needs your help!
i have question regarding to the precalculated Value set distribution type for infomation Broadcasting NW2004.
According to my understanding, firstly i created a broadCasting setting Z_Test based on Query1 to calculated the value Set, for example , for company code.
And then in the Query Designer, New a Query2 which contains a Variable type precalculated value set and its default value point to the broadcasting setting created before.
but when i check the query, it present an error message : 'Default value for Variable 'PM_Comp' are not within permitted value range'.
could anyone can help me out with it?
Thanks a lot!!
B.R
Vivi

Hi,
I am also getting the same error. Have you got any solution ??
Regards,
Sheetal

Bifurcation of values in Query Designer

Dear BI Gurus,
In a column we are getting both positive value and -ve value. We want to bifurcate the values and show only +ve value in one column and show -ve value in another column. Is it possible through Bex query designer?
Please through some light on this issue.
With Regards,
Balachander.S

Hi,
i think yes. You need two rules for your keyfigure and this rules contains an IF...ELSE loop like this:
For negativ keyfigure:
Rule1 = (KeyFigure LT 0) * Keyfigure
For positiv keyfigure:
Rule2 = (KeyFigure GT 0) * Keyfigure
Hope it helps
Regards

Value for a characteristic changed with an other value in Query Design

Similar Messages

Maybe you are looking for